Nanofibrous bicomponent scaffolds for the dual delivery of NGF and GDNF: controlled release of growth factors and their biological effects.

Electrospun fibrous scaffolds capable of providing dual growth factor delivery in a controlled manner have distinctive advantages for tissue engineering. In this study, we have investigated the formation, structure, and characteristics/properties of fibrous bicomponent scaffolds for the dual delivery of glial cell line-derived neurotrophic factor (GDNF) and nerve growth factor (NGF) for peripheral nerve tissue regeneration. GDNF and NGF were incorporated into core-shell structured poly(lactic-co-glycolic acid) (PLGA) and poly (D,L-lactic acid) (PDLLA) nanofibers, respectively, through emulsion electrospinning. Using dual-source dual-power electrospinning, bicomponent scaffolds composed of GDNF/PLGA fibers and NGF/PDLLA fibers with different fiber component ratios were produced. The structure, properties, and in vitro release behavior of mono- and bicomponent scaffolds were systematically investigated. Concurrent and sustained release of GDNF and NGF from bicomponent scaffolds was achieved and their release profiles could be tuned. In vitro biological investigations were conducted. Rat pheochromocytoma cells were found to attach, spread, and proliferate on all scaffolds. The release of growth factors from scaffolds could induce much improved neurite outgrowth and neural differentiation. GDNF and NGF released from GDNF/PLGA scaffolds and NGF/PDLLA scaffolds, respectively, could induce dose-dependent neural differentiation separately. GDNF and NGF released from bicomponent scaffolds exerted a synergistic effect on promoting neural differentiation.

Reconfigurable scaffolds for adaptive tissue regeneration.

Tissue engineering and regenerative medicine have offered promising alternatives for clinical treatment of body tissue traumas, losses, dysfunctions, or diseases, where scaffold-based strategies are particularly popular and effective. Over the decades, scaffolds for tissue regeneration have been remarkably evolving. Nevertheless, conventional scaffolds still confront grand challenges in bio-adaptions in terms of both tissue-scaffold and cell-scaffold interplays, for example complying with complicated three-dimensional (3D) shapes of biological tissues and recapitulating the ordered cell regulation effects of native cell microenvironments. Benefiting from the recent advances in "intelligent" biomaterials, reconfigurable scaffolds have been emerging, demonstrating great promise in addressing the bio-adaption challenges through altering their macro-shapes and/or micro-structures. This mini-review article presents a brief overview of the cutting-edge research on reconfigurable scaffolds, summarizing the materials for forming reconfigurable scaffolds and highlighting their applications for adaptive tissue regeneration. Finally, the challenges and prospects of reconfigurable scaffolds are also discussed, shedding light on the bright future of next-generation reconfigurable scaffolds with upgrading adaptability.

Structurally coloured contact lens sensor for point-of-care ophthalmic health monitoring.

Point-of-care (POC) diagnosis is of great significance in offering precise and personalized treatment for patients with eye diseases. Contact lenses, as a kind of popular wearable device on the eye, provide a suitable platform for the integration of biosensors for the POC diagnosis of eye diseases. However, existing contact lens sensors usually involve complex electronics and circuits, the manufacturing of which is complicated and signal readout requires additional instruments. To realize the instrument-free detection of pathologically relevant signals of eye diseases, we successfully established a structurally coloured contact lens sensor with a tunable colour in this investigation, which can directly report changes in moisture and pressure that are critical signs for xerophthalmia and glaucoma diagnosis, respectively, by altering colours. Importantly, this structurally coloured contact lens sensor is made solely from a biocompatible hydrogel, without the addition of any chemical pigments, therefore exhibiting superior biosafety and wearing comfort for wearable applications. With both excellent biocompatibility and sensing capabilities, this structurally coloured contact lens sensors thus holds great promise for instrument-free ophthalmic health monitoring, which will benefit a large proportion of the population that have a high risk of eye disease.

Incorporation and release of dual growth factors for nerve tissue engineering using nanofibrous bicomponent scaffolds.

Electrospun fibrous scaffolds have been extensively used as cell-supporting matrices or delivery vehicles for various biomolecules in tissue engineering. Biodegradable scaffolds with tunable degradation behaviors are favorable for various resorbable tissue replacements. In nerve tissue engineering, delivery of growth factors (GFs) such as nerve growth factor (NGF) and glial cell line-derived neurotrophic factor (GDNF) from scaffolds can be used to promote peripheral nerve repair. In this study, using the established dual-source dual-power electrospinning technique, bicomponent scaffolds incorporated with NGF and GDNF were designed and demonstrated as a strategy to develop scaffolds providing dual GF delivery. NGF and GDNF were encapsulated in poly(D, L-lactic acid) (PDLLA) and poly(lactic-co-glycolic acid) (PLGA) nanofibers, respectively, via emulsion electrospinning. Bicomponent scaffolds with various mass ratios of GDNF/PLGA fibers to NGF/PDLLA fibers were fabricated. Their morphology, structure, properties, and the in vitro degradation were examined. Both types of core-shell structured fibers were evenly distributed in bicomponent scaffolds. Robust scaffolds with varying component ratios were fabricated with average fiber diameter ranging from 307 ± 100 nm to 688 ± 129 nm. The ultimate tensile stress and elastic modulus could be tuned ranging from 0.23 ± 0.07 MPa to 1.41 ± 0.23 MPa, 11.1 ± 3.0 MPa to 75.9 ± 3.3 MPa, respectively. Adjustable degradation was achieved and the weight loss of scaffolds ranged from 9.2% to 44.0% after 42 day degradation test. GDNF and NGF were incorporated with satisfactory encapsulation efficiency and their bioactivity were well preserved. Sustained release of both types of GFs was also achieved.

Regulation Effects of Biomimetic Hybrid Scaffolds on Vascular Endothelium Remodeling.

The formation of complete and well-functioning endothelium is critical for the success of tissue-engineered vascular grafts yet remaining a fundamental challenge. Endothelium remodeling onto the lumen of tissue-engineered vascular grafts is affected by their topographical, mechanical, and biochemical characteristics. For meeting multiple requirements, composite strategies have recently emerged for fabricating hybrid scaffolds, where the integrated properties are tuned by varying their compositions. However, the underlying principle how the integrated properties of hybrid scaffolds regulate vascular endothelium remodeling remains unclear. To uncover the regulation effects of hybrid scaffolds on vascular endothelium remodeling, we prepared different biomimetic hybrid scaffolds using gelatin methacrylamide (GelMA) and poly-ε-caprolactone (PCL) and then investigated vascular endothelial cell responses on them. GelMA and PCL, respectively, conferred the resulting scaffolds with biomimetic bioactivity and mechanical properties, which were tuned by varying GelMA/PCL mass ratios (3:1, 1:1, or 1:3). On different GelMA/PCL hybrid scaffolds, distinct vascular endothelial cell responses were observed. Firm cell-scaffold/cell-cell interactions were rapidly established on the hybrid scaffolds with the highest mass ratio of bioactive GelMA. However, they were mechanically insufficient as vascular grafts. On the contrary, the scaffolds with the highest mass ratio of PCL showed significantly reinforced mechanical properties but poor biological performance. Between the two extremes, the scaffolds with the same GelMA/PCL mass ratio balanced the pros and cons of two materials. Therefore, they could meet the mechanical requirements of vascular grafts and support the early-stage vascular endothelial cell remodeling by appropriate biological signaling and mechanotransduction. This investigation experimentally proves that scaffold bioactivity is the dominant factor affecting vascular endothelial cell adhesion and remodeling, whereas mechanical properties are crucial factors for the integrity of endothelium. This work offers a universal design strategy for desirable vascular grafts for improved endothelium remodeling.

Cryogenic 3D printing for producing hierarchical porous and rhBMP-2-loaded Ca-P/PLLA nanocomposite scaffolds for bone tissue engineering.

The performance of bone tissue engineering scaffolds can be assessed through cell responses to scaffolds, including cell attachment, infiltration, morphogenesis, proliferation, differentiation, etc, which are determined or heavily influenced by the composition, structure, mechanical properties, and biological properties (e.g. osteoconductivity and osteoinductivity) of scaffolds. Although some promising 3D printing techniques such as fused deposition modeling and selective laser sintering could be employed to produce biodegradable bone tissue engineering scaffolds with customized shapes and tailored interconnected pores, effective methods for fabricating scaffolds with well-designed hierarchical porous structure (both interconnected macropores and surface micropores) and tunable osteoconductivity/osteoinductivity still need to be developed. In this investigation, a novel cryogenic 3D printing technique was investigated and developed for producing hierarchical porous and recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded calcium phosphate (Ca-P) nanoparticle/poly(L-lactic acid) nanocomposite scaffolds, in which the Ca-P nanoparticle-incorporated scaffold layer and rhBMP-2-encapsulated scaffold layer were deposited alternatingly using different types of emulsions as printing inks. The mechanical properties of the as-printed scaffolds were comparable to those of human cancellous bone. Sustained releases of Ca2+ ions and rhBMP-2 were achieved and the biological activity of rhBMP-2 was well-preserved. Scaffolds with a desirable hierarchical porous structure and dual delivery of Ca2+ ions and rhBMP-2 exhibited superior performance in directing the behaviors of human bone marrow-derived mesenchymal stem cells and caused improved cell viability, attachment, proliferation, and osteogenic differentiation, which has suggested their great potential for bone tissue engineering.

Mesosilica-coated ultrafine fibers for highly efficient laccase encapsulation.

In this paper, we present a simple but efficient biomimetic method to encapsulate laccase on mesoporous silica-modified electrospun (ES) ultrafine fibers. Because of the mild immobilization conditions (room temperature, aqueous condition), the encapsulated laccase retained a high activity of 94%. Because of the protection from the silica layer, the laccase worked efficiently at 60 °C and retained a long-term activity in the presence of proteinase K. After recycling for 10 times the laccase still preserved 96% of its original reactivity. More remarkably, the immobilized laccase on fibers could completely recover its activity after thermal denature, while the free laccase permanently lost the activity. We also demonstrated that the laccase on silica-coated fibers exhibited an enhanced decolorization capability of Brilliant Blue KN-R (BBKN-R) as compared to the free laccase, showing its great potential for industrial applications.