Morphological Changes of the Mandibular Angle After Orthognathic Surgery with Class III Deformity in East Asia.

The aims of this study were to analyze the morphological changes of the mandibular angle after orthognathic surgery for mandibular setback and investigate related factors. This retrospective study included patients from January 2017 to December 2021 diagnosed with skeletal class III deformity who underwent BSSRO (Group I) or bimaxillary surgery (Group II). Preoperative (T0), within 1 month postoperatively (T1), and 6 months postoperatively (T2) CT scans were collected from 61 patients to three-dimensionally analyze the proximal segment displacement, the linear and angular changes of the mandibular angle. The gonion points moved posteriorly and laterally (P < 0.001), while the inferior movement was not significant (P = 1.000, P = 0.274). The intergonial width increased by 3.32 ± 1.87 mm and 2.34 ± 1.77 mm as revealed by T2 CTs, respectively, in Group I and Group II. Mandibular angle decreased in both groups and by 1.41 ± 2.95° in Group I and 1.37 ± 3.41° in Group II. The increase in intergonial width between T1 and T0 was negatively correlated with the preoperative mandibular angle (P = 0.003) and positively correlated with the transverse outward movement of the proximal segment (P < 0.001). After surgery, the intergonial width increased and the inferior and posterior border of the proximal segment flared outward. The changes in intergonial width and mandibular angle were mainly related to the rotation of the proximal segment, which has a certain impact on the aesthetics of the lower face. Therefore, controlling the position of the proximal segment is of vital importance to lessen the changes in the mandibular angle area.Level of Evidence III. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Evaluation of cuspid cortical anchorage with different sagittal patterns using cone-beam computed tomography: a retrospective study.

BACKGROUND: No studies have focused on cortical anchorage resistance in cuspids, this study aimed to characterize the cortical anchorage according to sagittal skeletal classes using cone-beam computed tomography (CBCT). METHODS: CBCT images of 104 men and 104 women were divided into skeletal class I, II, and III malocclusion groups. Skeletal and dental evaluations were performed on the sagittal and axial cross-sections. One-way analysis of variance followed by least significant difference post-hoc tests was used for group differences. Multiple linear regression was performed to evaluate the relationship between influential factors and cuspid cortical anchorage. RESULTS: All cuspids were close to the labial bone cortex in different sagittal skeletal patterns and had different inclinations. There was a significant difference in the apical root position of cuspids in the alveolar bone; however, no significant difference in the middle or cervical portions of the root was found between different sagittal facial patterns. The middle of the cuspid root was embedded to the greatest extent in the labial bone cortex, with no significant difference between the sagittal patterns. For all sagittal patterns, 6.03 ± 4.41° (men) and 6.08 ± 4.45° (women) may be appropriate root control angles to keep maxillary cuspids' roots detached from the labial bone cortex. CONCLUSIONS: Comparison of skeletal class I, II, and III malocclusion patients showed that dental compensation alleviated sagittal skeletal discrepancies in the cuspid positions of all patients, regardless of the malocclusion class. Detailed treatment procedures and clear treatment boundaries of cuspids with different skeletal patterns can improve the treatment time, periodontal bone remodeling, and post-treatment long-term stability. Future studies on cuspids with different dentofacial patterns and considering cuspid morphology and periodontal condition may provide more evidence for clinical treatment.

Methods to assess tooth gingival thickness and diagnose gingival phenotypes: A systematic review.

OBJECTIVE: Measurement of the periodontal soft tissue dimension is crucial for clinical decision-making and aesthetic prognosis. However, the effectiveness of different measuring methods remains unclear. This systematic review aimed to explore the diagnostic accuracy of two non-invasive methods (namely CBCT and ultrasound) for gingival thickness measurement at different tooth positions. MATERIALS AND METHODS: A systematic search was performed using PubMed (including Medline), PubMed Central, OVID, Cochrane Library, LILACS and OpenGrey. Studies focusing on comparisons between CBCT, ultrasound and direct transgingival probing were included. The means, SDs and correlation coefficients with 95% confidence intervals were extracted and analyzed using Review Manager and R software. RESULTS: Twelve studies were selected. No significant difference was found between CBCT measurement and transgingival probing in the anterior and posterior dentition, and a moderate correlation was observed between these two methods (r = 0.41). A weak correlation was found between ultrasound measurement and transgingival probing (r = 0.32), and a slight but statistically significant difference was found when comparing ultrasonic devices and transgingival probing in the posterior area. CONCLUSION: CBCT can be considered a relatively reliable method for gingival thickness measurement in both the anterior and posterior areas compared with direct probing. Ultrasonic devices provide limited accuracy in the posterior area but are relatively comparable with direct clinical assessments in the anterior area. CLINICAL SIGNIFICANCE: Measurement location may affect the diagnostic accuracy and repeatability of gingival thickness measurements. Appropriate method selection in different clinical scenarios is crucial to aesthetic outcome prediction and decision-making.

Porous Electroactive and Biodegradable Polyurethane Membrane through Self-Doping Organogel.

In order to improve the processability of conductive polyurethane (CPU) containing aniline oligomers, a new CPU containing aniline trimer (AT) and l-lysine (PUAT) are designed and synthesized. Further, the 3D porous PUAT membranes have been prepared by a simple gel cooperated with freeze-drying method. Chemical testings and conductive properties testify a self- doping model of PUAT based on the rich electronic l-lysine and electroaffinity AT moities. The self-doping behavior further endows the PUAT copolymers specific characteristics such as high electrical conductivity and the formation of the polaron lattice like-structure in good solvent dimethyl sulfoxide. The combination of organogel and freeze-drying could prevent the collapse of pore structure when the copolymers are molded as membranes. The synergistic effect of l-lysine and AT components has a strong influence on the dissolution, degradation, thermal stability, and mechanical properties of PUAT. The excellent properties of PUAT would broad the application of conductive polymers in biomedicine field.

Correlation between gingival phenotype in the aesthetic zone and craniofacial profile-a CBCT-based study.

OBJECTIVES: To investigate the correlation between gingival phenotype and craniofacial profile and to evaluate the morphology of periodontal supporting tissues in the maxillary and mandibular anterior zones. MATERIALS AND METHODS: A total of 66 patients with 264 central incisors in good periodontal health were included in this cross-sectional study. CBCT images were used to assess gingiva and alveolar bone thickness of the maxillary and mandibular incisors at four vertical levels. Cephalometric analysis was used to assess the sagittal profile of the craniofacial structures. Gingival thickness was compared in patients with different craniofacial profiles based on ANB value. Linear regression coefficients adjusted by age and gender were used to evaluate the correlation between gingival thickness and the cephalometric parameters. RESULTS: Individuals with a smaller ANB value (ANB< 2) presented with thinner supporting tissue and a keratinized gingiva width in the anterior zone. Labial gingival thickness on the mandibular incisors at the cementoenamel junction (G1) and at the alveolar bone crest (G2) was positively related to cephalometric measures, indicating a maxillae-mandibular sagittal relationship (ANB value, Wits appraisal, A-NPog value). CONCLUSIONS: A moderate correlation was found between mandibular gingival thickness and the sagittal craniofacial profile. Patients with a concave craniofacial profile had a smaller keratinized gingiva width and gingival thickness in the aesthetic zone. CLINICAL RELEVANCE: Knowledge of these features on supporting tissue and their correlations with craniofacial morphology will help clinicians to develop a reasonable treatment plan and make decisions to achieve the best aesthetic outcome.

Enhanced Circadian Clock in MSCs-Based Cytotherapy Ameliorates Age-Related Temporomandibular Joint Condyle Degeneration.

Aging has been proven to be one of the major causes of temporomandibular joint (TMJ) disability and pain in older people. Peripheral circadian rhythms play a crucial role in endochondral ossification and chondrogenesis. However, the age-related alterations of circadian clock in TMJ structures are seldom reported. In the current study, TMJ condyles were extracted from young (4-month-old), middle-aged (10-month-old), and old-aged (20-month-old) adults to detect the morphology and circadian oscillation changes in TMJ condyles with aging. The transcriptome profile of Bmal1-deleted bone-marrow mesenchymal stem cells (BMSCs) and controls were explored to reveal the circadian-related differences at the molecular level. Furthermore, the reparative effects of Bmal1-overexpressed BMSCs-based cytotherapy in aged TMJ condyles were investigated in vitro and in vivo. Aged TMJ condyles displayed damaged tissue structure and an abolished circadian rhythm, accompanied by a progressively decreasing chondrogenesis capability and bone turnover activities. The deletion of Bmal1 significantly down-regulated chondrogenesis-related genes Prg4, Sox9, and Col7a1. Bmal1-overexpressed BMSCs presented improved migration capability ex vivo and attenuated age-related TMJ condylar degeneration in vivo. These data demonstrate the crucial role of circadian timing in the maintenance of osteochondral homeostasis, and indicate the potential clinical prospects of circadian-modified MSCs therapy in tissue regeneration.

Rational Design of Nanogels for Overcoming the Biological Barriers in Various Administration Routes.

Nanogels have been identified as outstanding nanocarrier candidates for drug delivery due to their desirable physiochemical properties and versatile applicability for diverse therapeutic molecules and imaging probes. One of the main challenges that hinder the clinical translation of nanogels is the low efficiency of drug delivery to the target sites because of the complex biological barriers during the in vivo journey. The purpose of this review is to examine and summarize the recent advances on the rational design and structural modulation of nanogels to overcome the barriers and challenges on the way to the site of action following various dosing modes. In particular, the functional moieties or domains have been incorporated in the nanogels, allowing them to spontaneously regulate their structure and physiochemical properties to cross one or more of the multifaceted barriers. In addition, the future perspectives are presented with regards to opportunities and challenges for the precise and efficient therapeutic use of nanogel formulations.

A 5-year molecular epidemiology survey of human enterovirus 71 before vaccine application in Yunnan Province, China.

Enterovirus A71 (EV-A71) infection is known to cause hand, foot, and mouth disease (HFMD). Last year, an inactivated EV-A71 whole virus vaccine was used to prevent this disease in Yunnan, China. To obtain a viral genetic background for evaluating vaccine protection and monitor the adaptive evolution of the virus after the vaccination, a 5-year molecular epidemiology survey was performed before the vaccination. Twenty-six EV-A71 strains were separated from 561 stool specimens of patients with serious HFMD. The whole-genomic sequences of these strains were sequenced. Phylogenetic trees were constructed, and the mutation spectra were analyzed based on these viral sequences. There was no obvious mutation for the circular EV-A71 strains of the same year. Pathogenic EV-A71 strains may arise from a "subgroup" randomly each year. Whole-genomic analyses showed that a hotspot nonsynonymous substitution potentially affecting the immunogenicity of vaccines was found in the 2A gene, but not in genes of the viral capsid proteins, and the genetic diversity of whole viral genomes associated with the incidence of HFMD. Therefore, it will be valuable to monitor the genome-wide changes of EV-A71 to detect the adaptive mutations affecting immunogenicity or perform investigations using genetic diversity as a parameter.

Reaction of Substituted Phenols with Lignin Char: Dual Oxidative and Reductive Pathways Depending on Substituents and Conditions.

Biomass chars are known to be intrinsically redox-reactive toward some organic compounds, but the mechanisms are still unclear. To address this, a char made anoxically at 500 °C from dealkaline lignin was reacted either in the fresh state or after 180-day aging in air with p-nitrophenol (NO2-P), p-hydroxybenzaldehyde (CHO-P), phenol (H-P), or p-methoxyphenol (MeO-P). The reactions were carried out under oxic or anoxic conditions. Degradation occurred in all cases. Both oxidation and reduction products were identified, with yields dependent on the presence or absence of air during reaction or storage. They included oligomers, amines, and ring-hydroxylated compounds, among others. Exposure to air suppressed sorption, annihilated reducing sites, and provided a source of reactive oxygen species that assisted degradation. Sorption suppression was due to the incorporation of hydrophilic groups by chemisorption of oxygen, and possibly blockage of sites by products. Fresh char has comparable electron-donating and accepting capacity, whereas there is a preponderance of electron-accepting over donating capacity in aged char. Under anoxic conditions, both oxidation and reduction occurred. Under oxic conditions or after aging in air, oxidation predominated, and linear free energy relationships were found between the rate constant and the Hammett or Brown substituent electronic parameter or the standard electrode potential of the phenol. The results demonstrate that chars possess heterogeneous redox activities depending on reaction pairs, reaction conditions, and aging.

Treatment of Class II malocclusion with tooth movement through the maxillary sinus.

This case report describes the successful extraction treatment of a Class II malocclusion with excessive maxillary sinus pneumatization. A 20-year-old man sought treatment with the major complaint of protrusive mouth and anterior teeth. He was diagnosed with a skeletal Class II relationship and protrusion of the maxilla. The clinical examination showed a severe Class II molar relationship with excessive overjet and deep overbite. Panoramic radiograph showed obvious maxillary sinus pneumatization bilaterally. Three premolars and one deciduous molar were extracted, and spaces were used to correct molar relationship and retract maxillary incisors. Light forces and low speed movement were applied to overcome the challenge of moving teeth through the maxillary sinus wall. Balanced facial esthetic and stable occlusion were obtained posttreatment with a notable bone formation of the maxillary sinus wall. This result highlights the possibility of tooth movement through cortical floor with bone remodeling and no obvious complications.

Evaluation of controlled-release triamcinolone acetonide-loaded mPEG-PLGA nanoparticles in treating experimental autoimmune uveitis.

Uveitis is a recurrent, sight-threatening intraocular inflammatory disease and is treated with glucocorticoids in clinical practice. In the present study, methoxypoly(ethyleneglycol)-poly(dl-lactide-co-glycolic acid) (mPEG-PLGA) nanoparticles in combination with triamcinolone acetonide (TA) were fabricated using a modified double emulsification method. Further, we characterized the TA-loaded nanoparticles, and investigated the effects of TA-loaded nanoparticles on experimental autoimmune uveitis rats, including histopathological examination and the alterations in interleukin (IL)-17 and IL-10 at mRNA and protein levels in either aqueous humor or serum. As a result, the TA-loaded nanoparticles were a well-defined spherical shape with a mean particle size of 82 nm. The in vitro release profile showed that the TA-loaded nanoparticles could sustain for more than 45 days, and possessed higher anti-inflammatory effects compared to TA alone after pathological examination, resulting in decreased IL-17 and elevated IL-10 levels in both aqueous humor and serum. Based on these findings, it can be concluded that TA-loaded mPEG-PLGA nanoparticles can potentially provide a better anti-inflammatory effect in treating chronic and recurrent uveitis in clinical practice.

Mass Continuous Suture versus Layered Interrupted Suture in Transverse Abdominal Incision Closure after Liver Resection.

BACKGROUND: Abdominal incision closure technique seriously influences patient prognosis. Most studies have focused on the different suture techniques and materials on midline incision, while little data are available in wide transverse or oblique incisions after liver resection (LR). The aim of the present study is to compare the two major incision suture methods after LR in our institute: Mass continuous suture (group P) and layered interrupted suture (group S). STUDY DESIGN: 258 patients undergoing LR with abdominal transverse or oblique incisions were prospectively enrolled. They were divided into two groups according to different abdominal incision suture methods and compared with the preoperative, intraoperative parameters, and postoperative wound complications. RESULTS: There were 118 patients in group P and 140 patients in group S, which was similar in general condition, primary disease, liver, and renal function. Incision length, total operation time, intraoperative blood loss, or perioperative antibiotics use were not different between the two groups. However, abdominal incision closure time and interval time for stitches removing after operation was significantly shorter in group P than group S (both p < 0.001). After a median follow-up of 16 months, the incidence of wound infection and fat liquefaction was more than two times higher in group S than group P, which, however, was not statistically different. Moreover, there was no difference in wound disruption or incisional hernia between the two groups. CONCLUSIONS: Although similar in occurrence of postoperative wound complications, mass continuous suture with polydioxanone seemed to be more timesaving in incision closure and motivated in wound healing.

Effects of SOD/catalase mimetic platinum nanoparticles on radiation-induced apoptosis in human lymphoma U937 cells.

Since polyacrylic acid capped platinum nano-particles (nano-Pts) are known to have a unique ability to quench superoxide (O2(-)) and hydrogen peroxide (H2O2), the anti-oxidant activity of nano-Pts against apoptosis induced by x-irradiation in human lymphoma U937 cells was investigated. DNA fragmentation assay, Annexin V-FITC/PI by flow cytometry and Giemsa staining revealed a significant decrease in apoptosis induced by 10 Gy, when cells were pre-treated with nano-Pts in a dose-dependent manner. Pre-treatment with nano-Pts significantly decreased radiation-induced reactive oxygen species (ROS) production, Fas expression and loss of mitochondrial membrane potential as determined by flow-cytometry. Furthermore, western blot analysis also showed that the expression of cleaved caspase-3, Bid and cytosolic cytochrome-c were significantly reduced in nano-Pts pretreated cells. Due to the catalase mimetic activity of nano-Pts, these results indicate that pre-treatment of U937 cells with nano-Pts significantly protect radiation-induced apoptosis by inhibiting intracellular ROS (mainly H2O2), which plays a key role in the induction of apoptosis, because of no practical observation of intracellular O2(-) formation.

Surface modification of solid-state nanopores for sticky-free translocation of single-stranded DNA.

Nanopore technology is one of the most promising approaches for fast and low-cost DNA sequencing application. Single-stranded DNA detection is primary objective in such device, while solid-state nanopores remain less explored than their biological counterparts due to bio-molecule clogging issue caused by surface interaction between DNA and nanopore wall. By surface coating a layer of polyethylene glycol (PEG), solid-state nanopore can achieve long lifetime for single-stranded DNA sticky-free translocation at pH 11.5. Associated with elimination of non-specific binding of molecule, PEG coated nanopore presents new surface characteristic as less hydrophility, lower 1/f noise, and passivated surface charge responsiveness on pH. Meanwhile, conductance blockage of single-stranded DNA is found to be deeper than double-stranded DNA, which can be well described by a string of blobs model for a quasi-equilibrium state polymer in constraint space.

Novel planar-structure electrochemical devices for highly flexible semitransparent power generation/storage sources.

Flexible and transparent power sources are highly desirable in realizing next-generation all-in-one bendable, implantable, and wearable electronic systems. The developed power sources are either flexible but opaque or semitransparent but lack of flexibility. Therefore, there is increasing recognition of the need for a new concept of electrochemical device structure design that allows both high flexibility and transparency. In this paper, we present a new concept for electrochemical device design--a two-dimensional planar comb-teeth architecture on PET substrate--to achieve both high mechanical flexibility and light transparency. Two types of prototypes--dye-sensitized solar cells and supercapacitors--have been fabricated as planar devices and demonstrated excellent device performance, such as good light transparency, excellent flexibility, outstanding multiple large bending tolerance, light weight, effective prevention of short circuits during bending, and high device integration with up-date microelectronics, compared to conventional sandwich structure devices. Our planar design provides an attractive strategy toward the development of flexible, semitransparent electrochemical devices for fully all-in-one elegant and wearable energy management.

Pressure-controlled motion of single polymers through solid-state nanopores.

Voltage-biased solid-state nanopores are well established in their ability to detect and characterize single polymers, such as DNA, in electrolytes. The addition of a pressure gradient across the nanopore yields a second molecular driving force that provides new freedom for studying molecules in nanopores. In this work, we show that opposing pressure and voltage bias enables nanopores to detect and resolve very short DNA molecules, as well as to detect near-neutral polymers.

Orthodontic treatment in a periodontal patient with pathologic migration of anterior teeth.

A 22-year-old man with severe periodontitis and pathologic tooth migration sought orthodontic treatment. He was treated successfully with effective control of the strength and the direction of the orthodontic forces, and a combination of periodontic and orthodontic treatment. After 22 months of orthodontic treatment, his occlusal trauma resulting from pathologic tooth migration was relieved, a stable occlusion was achieved, and mutual aggravation of occlusal trauma and periodontitis was prevented. Furthermore, the patient's facial esthetics and self-confidence were improved. Newly formed trabecular bone could be seen in the periapical x-rays in some regions where resorption had been severe. This case report shows that resorption of alveolar bone can be prevented and that multidisciplinary orthodontic treatment of a periodontal patient with pathologic tooth migration is effective and helpful.

Effect of DES lignin incorporation on physicochemical, antioxidant and antimicrobial properties of carboxymethyl cellulose-based films.

Herein, three pretreated grapevine lignins were incorporated into carboxymethyl cellulose films. The effects of traditional NaOH pretreated lignin and DES (ChCl-LA, ChCl-LA & K2CO3-EG) pretreated lignin on film properties were compared. Modern analytical techniques were employed to systematically characterize the pretreated lignin and the different CMC-lignin films. The results showed that DES lignin was of high purity, low molecular weight, and homogeneous structure. It outperformed traditional NaOH lignin in terms of compatibility with CMC, enabling it to perform its bioactivity and physicochemical functions in films. This feature effectively enhanced the hydrophobicity, UV shielding ability, water vapor barrier, thermal stability, mechanical properties, and biological activity of CMC-DES lignin film. NMR (2D HSQC) showed that the excellent antioxidant and antibacterial capabilities of CMC-DES lignin film are due to the retention of butyl (S) and p-hydroxyphenyl (H) units in DES lignin, resulting in its rich phenolic hydroxyl content. The detailed structural elucidation of DES lignin's chemical interactions with CMC provided valuable insights into the advantageous properties observed in the films, presenting innovative solutions for applications in the food packaging and preservation industries.

Synergism of jet milling and deep eutectic solvent pretreatment on grapevine lignin fractionation and enhancing enzymatic hydrolysis.

Herein, we investigated the synergistic effects of jet milling (JM) and deep eutectic solvent (DES) pretreatment on the fractionation of grapevine lignin and the consequent enhancement of enzymatic hydrolysis. Grapevine, a substantial byproduct of the wine industry, was subjected to JM pretreatment to produce finely powdered particles (median diameter D50 = 98.90), which were then further treated with acidic ChCl-LA and alkaline K2CO3-EG DESs. The results revealed that the combined JM + ChCl-LA pretreatment significantly increased the cellulose preservation under optimal conditions (110 °C, 4 h, and 20 % water content), achieving removal rates of 74.18 % xylan and 66.05 % lignin, respectively. The pretreatment temperature and inhibitor production were reduced, resulting in a remarkable threefold increase in glucose yield compared to untreated samples. Moreover, the structural analysis of the pretreated lignin indicated an enrichment of phenolic units, leading to enhanced antioxidant and antibacterial activities, particularly in the JM pretreated samples. These findings underscore the promising potential of the synergistic JM and DES pretreatment in facilitating the efficient utilization of grapevine lignocellulosic biomass for sustainable biorefinery technologies.