Covalent Immobilization of Natural Biomolecules on Chitin Nanocrystals.

As a highly crystalline and renewable natural polymer nanomaterial, chitin nanocrystals (ChNCs) have attracted intense interest in the biomedical field. The structure of a ChNC is composed of an acetylglucosamine unit containing two hydroxyl groups and an acetyl group. The acetyl group can be converted to the active amino group through deacetylation, which is under the condition of maintaining the rod-like morphology and high crystalline property and is beneficial for the following modification and potential application. We investigated the relationship between different treatments and varied crystallinities of the modified ChNC, which obtained surface amino groups and aldehyde groups and retained high crystallinity. The natural biomolecules were covalently immobilized on the surface of the ChNC. The etherification was performed based on the hydroxyl groups. Based on the amino groups and the aldehyde groups, the carboxyamine and Knoevenagel condensation reactions were realized on ChNCs. Finally, natural biomolecule-modified ChNCs showed no or low cytotoxicity, antibacterial properties, and high antioxidant properties, which extended their potential biomedical applications.

Dendrimer-Au Nanoparticle Network Covered Alumina Membrane for Ion Rectification and Enhanced Bioanalysis.

Ion transport in an artificial asymmetric nanoporous membrane, which is similar to biological ion channels, can be used for biosensing. Here, a dendrimer-Au nanoparticle network (DAN) is in situ assembled on a nanoporous anodic aluminum oxide (AAO) surface, forming a DAN/AAO hybrid membrane. Benefiting from the high surface area and anion selectivity of DAN, the prepared DAN/AAO hybrid presents selective ion transport. Under a bias potential, a diode-like current-potential (I-V) response is observed. The obtained ionic current rectification (ICR) property can be tuned by the ion valence and pH value of the electrolyte. The rectified ionic current endows the as-prepared DAN/AAO hybrid with the ability of enhanced bioanalysis. Sensitive capture and detection of circulating tumor cells (CTCs) with a detection limit of 80 cells mL-1 as well as excellent reusability can be achieved.

Construction and characterization of an infectious cDNA clone of coxsackievirus A 10.

BACKGROUND: Coxsackievirus A10 (CA10) constitutes one of the four major pathogens causing hand, foot and mouth disease in infants. Infectious clones are of great importance for studying viral gene functions and pathogenic mechanism. However, there is no report on the construction of CA10 infectious clones. METHODS: The whole genome of CA10 derived from a clinical isolate was amplified into two fragments and ligated into a linearized plasmid vector in one step by In-Fusion Cloning. The obtained CA10 cDNA clones and plasmids encoding T7 RNA polymerase were co-transfected into 293 T cells to rescue CA10 virus. The rescued virus was identified by SDS-PAGE, Western blotting and transmission electron microscopic. One-day-old ICR mice were intracerebrally inoculated with the CA10 virus and clinical symptoms were observed. Multiple tissues of moribund mice were harvested for analysis of pathogenic changes and viral distribution by using H&E staining, real-time PCR and immunohistochemical staining. RESULTS: CA10 viruses were rescued from the constructed cDNA clone and reached a maximum titer of 108.125TCID50/mL after one generation in RD cells. The virus exhibited similar physical and chemical properties to those of the parental virus. It also showed high virulence and the ability to induce death of neonatal ICR mice. Severe necrotizing myositis, intestinal villus interstitial edema and severe alveolar shrinkage were observed in infected mice. The viral antigen and the maximum amount of viral RNA were detected in limb skeletal muscles, which suggested that the limb skeletal muscles were the most likely site of viral replication. CONCLUSION: Infectious clones of CA10 were successfully constructed for the first time, which will facilitate the establishment of standardized neonatal mouse models infected with CA10 for the evaluation of vaccines and antiviral drugs, as well as preservation and sharing of model strains.

Enrichment and Purification of the Bioactive Flavonoids from Flower of Abelmoschus manihot (L.) Medic Using Macroporous Resins.

Flower of Abelmoschus manihot (FAM) is clinically effective to treat chronic kidney disease (CKD) with a relatively high dosage. To improve the efficacy and the compliance of patients, macroporous resins were adopted to enrich and purify flavonoids from FAM, which are thought to be the major renal protective constituents in FAM. After screening six different kinds of macroporous resins, HPD-100 was selected for its great adsorption and desorption capacity. Then, orthogonal design tests were used to optimize parameters in the processes of impurity removal and flavonoids of FAM desorption on column chromatogram. Moreover, process scale-up was performed, and purification effects maintained after amplification. After purification, the content of seven main flavonoids in the product increased from 8.29% to 51.43%. Protective and anti-inflammatory effects of crude extract and the flavonoid component of FAM after purification were investigated on the adriamycin-damaged HK-2 cells and lipopolysaccharide-stimulated Raw 264.7 cells models. Both bioactivities were improved greatly after purification for these two cell models. Therefore, the purification process had enriched the main bioactive constituents with potential alleviating kidney injury activities. The flavonoid component of FAM is worthy of being developed as an improved remedy for CKD with better patients' compliance.

Preparing liposomes through frame guided assembly with high-loading functional nucleic acids.

Recently, a frame guided assembly (FGA) has been demonstrated as a robust tool to prepare liposomes with customized morphologies. However, the potential application of FGA liposomes in delivering nucleic acid drugs is still limited by the low payload. In this study, by systemically investigating the correlation between the leading hydrophobic group (LHG) density and the initial detergent concentration, it has been demonstrated that frames with a low LHG density, which may facilitate the increase of the load of the nucleic acid drug, could be guided to form liposomes at low initial detergent concentrations. By capitalizing on this phenomenon, FGA liposomes with a high loading of ASO/siRNA have been successfully prepared and applied to treat pathogenic genes.

Size effect of cellulose nanocrystals in cellular internalization and exosome-packaging exocytosis.

With the purpose of investigating the bio-interaction between CNC and cells, the end-fluorescence CNC (FCNC) and surface-adsorbed glucosamine [(g)FCNC] were prepared by the region-selective modification and electrostatic adsorption strategy in this study. The cell growth was arrested in a time dependent manner when incubated with CNC in the low glucose environment. The small-size FCNC was preferred by the cells with the observation of higher affinity. Specifically, the affinity of (g)FCNC to the phagocytic cell RAW264.7 cell and kidney derived cell 293 t was generally increased in response to the "Warburg effect", which on the contrary was observed with the weak effect in the tumor cells. We confirmed the exocytosis of internalized rod-like nanocrystal was achieved by the packaging effect of exosomes. Our results revealed the underappreciated bio-interaction between CNC and different cells, which contributed the evidence of an inspiration for this natural nanomaterial in the cell-level application.

Water redispersion and cytotoxicity of reducing end-modified cellulose nanocrystals by grafting long-chain poly(ethylene oxide).

As an ageless "nano-element" in trees, plants and other cellulose-containing species, cellulose nanocrystal (CNC) has been widely used as a renewable building block in diverse applications. Traditional modification strategy of CNC is based on the reaction with its surface hydroxyl groups, suffering the change of its surface physiochemical properties. In this study, a regio-selective and local modification strategy was performed on the reducing end of CNC with the grafting of long-chain poly(ethylene oxide) (PEO) to produce the end-grafted nanocrystals (CNC-eg-PEO). Based on thiol-ene click reaction, the terminal allyl-PEO was covalently attached on the modified nanocrystal possessing the reactive thiol groups. With the preservation of surface chemistry, the redispsersion stability of CNC-eg-PEO was promoted, attributed to the dual effect of steric stabilization and electrostatic repulsion. Furthermore, the CNC-eg-PEO exhibited the low cytotoxicity to ATCC cell lines HFF and CAL-27, indicating its promising biomedical application.

Reduced delay in diagnosis of odontogenic keratocysts with malignant transformation: A case report.

BACKGROUND: In rare cases, odontogenic keratocysts (ODs) transform into squamous cell carcinoma. Intervals between the first attendance of a patient and the diagnosis of OD with malignant transformation vary from weeks to years. In this article, we report a case of malignancy derived from OD with a five-day delay in diagnosis. CASE SUMMARY: A 54-year-old woman was referred to Tongji Hospital in Wuhan, China with complaints of moderate pain, recurrent swelling, and pus discharge around her left maxillary lateral incisor for over 10 years. Physical examination revealed a fistula at the palatine-side mucoperiosteum of the left maxillary lateral incisor and enlarged lymph node in the left neck. Cone beam computed tomography revealed a cystic lesion with massive bone destruction from the left maxillary central incisor to the left secondary maxillary premolar and local bony destruction in the left first mandibular molar. The patient was clinically diagnosed with OD. Enucleation rather than marsupialization was performed given the risk factors of long history, recent aggravated pain, and massive bony destruction. Malignant transformation of OD was confirmed by pathologists 3 d after the operation. Radical surgery was performed, and lymph node metastasis was observed. The patient was subjected to postoperative radiotherapy and synchronous chemotherapy, and no local recurrence or distant metastasis was noted at one-year follow-up. CONCLUSION: Our case suggests that clinicians should be aware of the malignant transformation of OD, especially when patients present with a long history, massive cyst, chronic inflammation, recent persistent infections, aggravated pain, numbness around the cystic lesion, and lymph node enlargement.

Surface De-PEGylation Controls Nanoparticle-Mediated siRNA Delivery In Vitro and In Vivo.

The present work proposes a unique de-PEGylation strategy for controllable delivery of small interfering RNA (siRNA) using a robust lipid-polymer hybrid nanoparticle (NP) platform. The self-assembled hybrid NPs are composed of a lipid-poly(ethylene glycol) (lipid-PEG) shell and a polymer/cationic lipid solid core, wherein the lipid-PEG molecules can gradually dissociate from NP surface in the presence of serum albumin. The de-PEGylation kinetics of a series of different lipid-PEGs is measured with their respective NPs, and the NP performance is comprehensively investigated in vitro and in vivo. This systematic study reveals that the lipophilic tails of lipid-PEG dictate its dissociation rate from NP surface, determining the uptake by tumor cells and macrophages, pharmacokinetics, biodistribution, and gene silencing efficacy of these hybrid siRNA NPs. Based on our observations, we here propose that lipid-PEGs with long and saturated lipophilic tails might be required for effective siRNA delivery to tumor cells and gene silencing of the lipid-polymer hybrid NPs after systemic administration.