Preparation of N-doped cellulose-based hydrothermal carbon using a two-step hydrothermal induction assembly method for the efficient removal of Cr(VI) from wastewater.

Cr(VI) pollution is a growing problem that causes the deterioration of the environment and human health. We report the development of an effective adsorbent for the removal of Cr(VI) from wastewater. N-doped cellulose-based hydrothermal carbon (N-CHC) was prepared via a two-step hydrothermal method. The morphology and structural properties of N-CHC were investigated by various techniques. N-CHC has many O and N groups, which are suitable for Cr(VI) adsorption and reduction. Intermittent adsorption experiments showed that N-CHC had an adsorption capacity of 151.05 mg/g for Cr(VI) at pH 2, indicating excellent adsorption performance. Kinetic and thermodynamic analyses indicates that the adsorption of Cr(VI) on N-CHC follows a monolayer uniform adsorption process, which is a spontaneous endothermic process dominated by chemical interaction and limited by diffusion within particles. In a multi-ion system (Pb2+, Cd2+, Mn7+, Cl-, and SO42-), the selectivity of N-CHC toward Cr(VI) was 82.62%. In addition, N-CHC demonstrated excellent reuse performance over seven adsorption-desorption cycles; the Cr(VI) removal rate of N-CHC in 5-20 mg/L wastewater was >99.87%, confirming the potential of N-CHC for large-scale applications. CN/C-OR, pyridinic-N, and pyrrolic-N were found to play a critical role in the adsorption process. This study provides a new technology for Cr(VI) pollution control that could be utilized in large-scale production and other environmental applications.

Photoinduced Dual Shape Programmability of Covalent Adaptable Networks with Remarkable Mechanical Properties.

As classic shape memory polymers featuring shape reconfiguration of temporary state, covalent adaptable networks containing reversible bonds can enable permanent-state reconfigurability through topological rearrangement via dynamic bond exchange. Yet, such an attractive dual shape programmability is limited by the actuation mode of direct heat transfer and poor mechanical properties, restricting its control precision and functionality. Herein, we presented a method to create nanocomposites with photomodulated dual shape programmability and remarkable mechanical properties leading the fields of covalent adaptable networks. MXene, whose photothermal efficiency was revealed to be regulated by the etching method and delamination, was introduced into polyurethane networks. Upon adjusting the light intensity, the dual shape programmability of both permanent and temporary states could be accomplished, which exhibited potential in information recognition, photowriting paper, etc. Furthermore, owing to the dynamic transcarbamoylation at elevated temperatures, such a phototriggered dual shape programmability could be maintained after the self-healing and reprocessing.

Three-dimensional lignin-based polyporous carbon@polypyrrole for efficient removal of reactive blue 19: A synergistic effect of the N and O groups.

Reactive blue 19 is one of the abundant carcinogens commonly used in industrial applications. This study transformed industrial lignin into a lignin-based polyporous carbon@polypyrrole (LPC@PPy) by a hydrothermal-activation-in situ polymerization strategy for removal of reactive blue 19. The hydrothermal reaction and polypyrrole polymerization provide abundant O and N groups, and the pore-making process promotes the even distribution of O and N groups in the 3D pore of LPC@PPy, which is favorable for the adsorption of reactive blue 19. The adsorption capacity of LPC@PPy for reactive blue 19 is 537.52 mg g-1, which is 2.04 times the performance of LPC (only hydrothermal and activation process, only have O groups) and 3.36 times that of LC (direct lignin activation, lack of O and N groups). After 8 cycles, LPC@PPy still maintained a high adsorption capacity of 92.14 % for reactive blue 19. In addition, this study found that N and O groups in the material played an important role in adsorption, mainly pyridinic-N, C-OH, -COOR, -C-O- and CC. This work provides a new strategy for the removal of reactive blue 19 and determines the groups that mainly interact with reactive blue 19, which provides a new reference for adsorption, catalysis and related fields.

Enhancement of Cr(VI) adsorption on lignin-based carbon materials by a two-step hydrothermal strategy: Performance and mechanism.

Cr(VI) is a carcinogenic heavy metal that forms an oxygen-containing anion, which is difficult to remove from water by adsorbents. Here, industrial alkali lignin was transformed into a Cr(VI) adsorbent (N-LC) by using a two-step hydrothermal strategy. The characterization results of the adsorbent showed that O and N were uniformly distributed on the surface of the adsorbent, resulting in a favorable morphology and structure. The Cr(VI) adsorption of N-LC was 13.50 times that of alkali lignin, and the maximum was 326.10 mg g-1, which confirmed the superiority of the two-step hydrothermal strategy. After 7 cycles, the adsorption of N-LC stabilized at approximately 62.18 %. In addition, in the presence of coexisting ions, N-LC showed a selective adsorption efficiency of 85.47 % for Cr(VI), which is sufficient to support its application to actual wastewaters. Model calculations and characterization showed that N and O groups were the main active factors in N-LC, and CO, -OH and pyridinic-N were the main active sites. This study provides a simple and efficient method for the treatment of heavy metals and the utilization of waste lignin, which is expected to be widely applied in the environmental, energy and chemical industries.