[Therapeutic strategies, practice, and prospect of a clinical cure for chronic hepatitis B in China].

Clinical cure (herein referred to as functional cure) is currently recognized as the ideal therapeutic goal by the guidelines for the prevention and treatment of chronic hepatitis B (CHB) at home and abroad. China has achieved significant results in research and exploration based on pegylated interferon alpha therapeutic strategies to promote the effectiveness of CHB clinical cure rates in clinical practice. The summary and optimization of clinical cure strategies in different clinical type classifications, as well as the exploration of clinical cure continuity and long-term outcomes, are of great significance for solving the current bottleneck problem and our future efforts in the developmental directions of clinical cure in CHB populations.

Disrupting mechanical homeostasis promotes matrix metalloproteinase-13 mediated processing of neuron glial antigen 2 in mandibular condylar cartilage.

Post-traumatic osteoarthritis in the temporomandibular joint (TMJ OA) is associated dysfunctional cellmatrix mediated signalling resulting from changes in the pericellular microenvironment after injury. Matrix metalloproteinase (MMP)-13 is a critical enzyme in biomineralisation and the progression of OA that can both degrade the extracellular matrix and modify extracellular receptors. This study focused on MMP-13 mediated changes in a transmembrane proteoglycan, Neuron Glial antigen 2 (NG2/CSPG4). NG2/CSPG4 is a receptor for type VI collagen and a known substrate for MMP-13. In healthy articular layer chondrocytes, NG2/CSPG4 is membrane bound but becomes internalised during TMJ OA. The objective of this study was to determine if MMP-13 contributed to the cleavage and internalisation of NG2/CSPG4 during mechanical loading and OA progression. Using preclinical and clinical samples, it was shown that MMP-13 was present in a spatiotemporally consistent pattern with NG2/CSPG4 internalisation during TMJ OA. In vitro, it was illustrated that inhibiting MMP-13 prevented retention of the NG2/CSPG4 ectodomain in the extracellular matrix. Inhibiting MMP-13 promoted the accumulation of membrane-associated NG2/CSPG4 but did not affect the formation of mechanical-loading dependent variant specific fragments of the ectodomain. MMP- 13 mediated cleavage of NG2/CSPG4 is necessary to initiate clathrin-mediated internalisation of the NG2/ CSPG4 intracellular domain following mechanical loading. This mechanically sensitive MMP-13-NG2/CSPG4 axis affected the expression of key mineralisation and OA genes including bone morphogenetic protein 2, and parathyroid hormone-related protein. Together, these findings implicated MMP-13 mediated cleavage of NG2/CSPG4 in the mechanical homeostasis of mandibular condylar cartilage during the progression of degenerative arthropathies such as OA.

Effect of stretch frequency on osteogenesis of periodontium during periodontal ligament distraction.

OBJECTIVES: Periodontal ligament distraction (PDLD) can accelerate orthodontic tooth movement (OTM). However, the effect of stretch frequency on osseous formation during PDLD remains unclear. Here, we sought to identify the effect of PDLD frequency on the osteogenic remodelling of the periodontium. MATERIALS AND METHODS: (i) In vitro, five human periodontal ligament stem cell (PDLSC) cultures were randomized to either static conditions or exposure to a cyclic stretch force involving 12% deformation at frequencies of 0.3, 0.5, 0.7 or 1.0 Hz for 12 h, and the osteogenic differentiation of PDLSCs was assessed using Western blotting. (ii) In vivo, 18 beagle dogs underwent orthodontic distalization of bilateral maxillary first premolars. In the test groups, PDLD was performed at a frequency of two or six times/day, while Ni-Ti coil springs were applied to mimic traditional OTM in the control group. The amount of OTM and histological staining was estimated after force loading for 5, 10 and 15 days. RESULTS: (i) In vitro, the expression of osteogenic-specific markers (runt-related transcription factor 2 [Runx2], type I collagen [COL-I] and osteocalcin [OCN]) increased with the frequency of tensile force, to a peak at 0.7 Hz. (ii) In vivo, both PDLD groups displayed a greater rate of OTM and a higher bone metabolism than the control group. The expression of COL-I and OCN was significantly reinforced in the six times/day-PDLD group in comparison to the two times/day-PDLD group. CONCLUSIONS: The cyclic stretch force enhances osteogenesis of the periodontium in a frequency-dependent manner.

[Automatic determination of mandibular landmarks based on three-dimensional mandibular average model].

OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION: The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.

[Preliminary evaluation of the trueness of 5 chairside 3D facial scanning techniques].

OBJECTIVE: To quantitatively evaluate the trueness of five chairside three-dimensional facial scanning techniques, and to provide reference for the application of oral clinical diagnosis and treatment. METHODS: The three-dimensional facial data of the subjects were collected by the traditional professional three-dimensional facial scanner Face Scan, which was used as the reference data of this study. Four kinds of portable three-dimensional facial scanners (including Space Spider, LEO, EVA and DS-FScan) and iPhone Ⅹ mobile phone (Bellus3D facial scanning APP) were used to collect three-dimensional facial data from the subjects. In Geomagic Studio 2013 software, through data registration, deviation analysis and other functions, the overall three-dimensional deviation and facial partition three-dimensional deviation of the above five chairside three-dimensional facial scanning technologies were calculated, and their trueness performance evaluated. Scanning time was recorded during the scanning process, and the subject's comfort was scored by visual analogue scale(VAS). The scanning efficiency and patient acceptance of the five three-dimensional facial scanning techniques were evaluated. RESULTS: DS-FScan had the smallest mean overall and mean partition three-dimensional deviation between the test data and the reference data, which were 0.334 mm and 0.329 mm, respectively. The iPhone Ⅹ mobile phone had the largest mean overall and mean partition three-dimensional deviation between the test data and the reference data, which were 0.483 mm and 0.497 mm, respectively. The detailed features of the three-dimensional facial data obtained by Space Spider were the best. The iPhone Ⅹ mobile phone had the highest scanning efficiency and the highest acceptance by the subject. The average scanning time of the iPhone Ⅹ mobile phone was 14 s, and the VAS score of the subjects' scanning comfort was 9 points. CONCLUSION: Among the five chairside three-dimensional face scanning technologies, the trueness of the scan data of the four portable devices had no significant difference, and they were all better than the iPhone Ⅹ mobile phone scan. The subject with the iPhone Ⅹ scanning technology had the best expe-rience.

[Initial establishment of digital reference standardized crown models of the primary teeth].

OBJECTIVE: To explore the construction process of the digital reference crown models, and to initially establish the digital reference crown models of the primary teeth to lay the foundation for the establishment of the standardized crown models and the future related applications of computer-aided design/computer-aided manufacture (CAD/CAM) technology to pediatric dentistry. METHODS: This study randomly selected children who were caries free, aged from 4 to 5 years in several kindergartens of Haidian District of Beijing.Plaster dental models were made for the children after taking complete impressions.The digital dental models were reconstructed by using the three-dimensional (3D) dental model scanner.And then, Geomagic Studio, a 3D reverse engineering software, was employed to extract the single dental crown data, the mesiodistal and buccolingual diameters and the height of the crowns were measured.The object was reduced or enlarged by a numerical factor, and then the size of each dental crown was standardized.A total of 3-5 points features on the crown were created, and all the objects were aligned through the functions of feature-based alignment.Finally, through average-based object creation and smoothing, the digital models of reference crowns of the primary teeth were established. RESULTS: A total of 40 plaster dental models from 16 boys and 26 girls were selected out for our further study.The digital dental models were reconstructed, and the mesiodistal and buccolingual diameters and the height of the crowns were measured by using reverse engineering technology.Comparing the results of using mesiodistal diameter, buccolingual diameter and height as the standards, we chose the mesiodistal diameters of crowns to do the standardization, and successfully established the digital reference models of 20 primary teeth crowns with detailed surface characteristics. CONCLUSION: In this study, the digital reference crown models of the primary teeth were established by reverse engineering technology, providing reference value for the standardized crown models and application for clinical practice, scientific research and teaching.Furthermore, this study also contributes to the extensive application of CAD/CAM technology in pediatric dentistry and the development of CAD/CAM dental systems with independent intellectual property rights.

[Evaluation of root resorption after surgical orthodontic treatment of skeletal Class â ¢ malocclusion by three-dimensional volumetric measurement with cone-beam CT].

OBJECTIVE: To explore the method of measuring root volume with cone-beam computed tomography (CBCT) three-dimensional reconstruction technology, and to study root length and root volume of upper and lower central incisors in patients with skeletal Class Ⅲ malocclusion treated by surgical orthodontic treatment. METHODS: Twenty patients with skeletal Class Ⅲ malocclusion undergoing surgical orthodontic treatment were selected. CBCT data at three time points, before decompensation treatment (T0), after decompensation treatment (before orthognathic surgery, T1), and the end of post-operative orthodontic treatment (T2) were collected. Three-dimensional reconstruction technology was used to measure the root length and root volume of the upper and lower central incisors (including total root volume, cervical root and apical root), calculate the percentage of reduction volume, and measure the distance of tooth movement after orthodontic treatment. Data were statistically analyzed by SPSS 20.0 software. Least significant difference (LSD) method was used for pair comparison between the groups subject to normal distribution, and non-parametric test was used for comparison between the groups not subject to normal distribution. The differences of root length and root volume of upper and lower incisors were compared, and the characteristics of root absorption were analyzed. RESULTS: Root length and root volume of the upper and lower central incisors were reduced during the surgical orthodontic treatment (P < 0.05) in cases. Both the root volume of cervical root and apical root were significantly reduced (P < 0.05), the reduction of apical root was more significant. The percentage of root volume reduction of the upper central incisor was (30.51±23.23)%, and lower central incisor (23.24±11.96)%. Compared with the upper central incisor, the root volume reduction amount and percentage of the lower central incisor were smaller, and apical root volume reduction of the upper central incisor was greater than that of the lower central incisor, which was statistically significant (P < 0.05). During pre-surgical orthodontic treatment, maxillary central incisor palatal moving was in a controlled tipping manner, and the mandibular central incisor tipped labially. CONCLUSION: In patients with skeletal Class Ⅲ malocclusion, root length and total root volume of upper and lower central incisors decreased during surgical orthodontic treatment. Root volume measurement indicated that the cervical root also had root resorption. The difference in root resorption of the upper and lower central incisors might be related to the distance and direction of teeth movement. CBCT three-dimensional reconstruction will compensate for the limitation of root length measurement in evaluating root resorption.

[Preliminary clinical application verification of complete digital workflow of design lips symmetry reference plane based on posed smile].

OBJECTIVE: To automatically construct lips symmetry reference plane (SRP) based on posed smile, and to evaluate its advantages over conventional digital aesthetic design. METHODS: Eighteen subjects' three-dimensional facial and dentition data were gathered in this study. The lips SRP of experimental groups were used with the standard weighted Procrustes analysis (WPA) algorithm and iterative closest point (ICP), respectively. A reference plane defined by experts based on regional ICP algorithm, served as the truth plane. The angle error values between the lips SRP of WPA algorithm in the experimental groups and the truth plane were evaluated in this study, and the lips SRP of ICP algorithm of the experimental groups was calculated in the same way. The lips SRP based on posed smile as a reference for aesthetic design and evaluate preliminary clinical application. RESULTS: The average angle error between the lips SRP of WPA algorithm and the truth plane was 1.78°±1.24°, which was smaller than that between the lips SRP of ICP and the truth plane 7.41°±4.31°. There were significant differences in the angle errors among the groups (P < 0.05). In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile and the original symmetry plane by re-ference compared with the prosthetic design, the subjects' scores on the lips SRP of WPA algorithm based on posed smile (8.48±0.57) were higher than those on the original symmetry plane (5.20±1.31). CONCLUSION: Automatically constructing the lips SRP of WPA algorithm based on posed smile was more accurate than ICP algorithm, which was consistent with the truth plane. Moreover, it can provide an important reference for oral aesthetic diagnosis and aesthetic analysis of the restoration effect. In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile can improve the patients' satisfaction in esthetic rehabilitation.

[The incidence and causes of Tapia syndrome after posterior cervical spine surgery under oral tracheal intubation general anesthesia].

Objective: To observe the incidence of Tapia syndrome after posterior cervical spine surgery under oral tracheal intubation general anesthesia and to explore the risk factors for its occurrence. Methods: The data of patients suffered from Tapia syndrome after posterior cervical spine surgery under oral tracheal intubation general anesthesia from June 2018 to May 2021 were retrospectively reviewed. The type of procedure, surgeon, age and gender were selected as matching factors, 4 patients without Tapia syndrome were selected as control group for each case. The radiological parameters including mandibular-vertebral distance, thyroid-vertebral distance, thyroid cartilage-vertebral distance, and C2-C7 lordotic Cobb angle were measured on lateral radiographs of the cervical spine. The above parameters were measured on neutral, over-flexion and over-extension radiographs. The difference between the Tapia group and the control group were analyzed. Results: There were 9 patients (0.37%) suffered from Tapia syndrome after posterior cervical spine surgery under oral tracheal intubation general anesthesia in 2 431 patients, and it happened in 0.67 days (0-2 days) after the operation. There were 3 males and 6 females with a mean age of (61±5) years. The clinical manifestations was tongue extension deviation in 8 cases (88.9%), dysarthria in 6 cases (66.7%), dysphagia in 3 cases (33.3%), tongue stiffness in 3 cases (33.3%), hoarseness in voice and pharyngeal discomfort in 1 case (11.1%). All of the symptoms were relieved in all patients at 3 months postoperative follow-up. In neutral position, the mandibular-vertebral distance was (7.19±3.96) mm in the control group and it was (3.98±3.01) mm in Tapia group (P<0.05). From neutral position to hyperflexion position, the distance between mandible and vertebral body was reduced from 3.98 mm to 1.95 mm in the Tapia group and decreased for 51.0%, and it decreased from 7.19 mm for 31.8% to 4.90 mm in the control group. Conclusions: The incidence of Tapia syndrome after posterior cervical spine surgery under oral tracheal intubation general anesthesia is low. A smaller mandibular-vertebral distance on pre-operative cervical spine lateral view radiograph maybe a risk factor for Tapia syndrome after posterior cervical surgery under oral tracheal intubation general anesthesia.

[Ruxolitinib combined with liposomal doxorubicin, etoposide, methylprednisolone+/-PEG-asparaginase in treatment of relapsed/refractory pediatric hemophagocytic lymphohistiocytosis].

Objective: To investigate the efficacy and safety of ruxolitinib, liposomal doxorubicin, etoposide, methylprednisolone+/-PEG-asparaginase (RU-DEP+/-L) in the treatment of relapsed/refractory (R/R) pediatric hemophagocytic lymphohistiocytosis (HLH). Methods: The clinical data of R/R pediatric HLH, who accepted the RU-DEP+/-L regimen at Beijing Children's Hospital from January 2018 to December 2019 was retrospectively analyzed. Results: A total of 16 patients were included in this study, including 13 males and 3 females, aged[M(Q1,Q3)] 1 (1, 2) years at diagnosis. Thirteen patients were diagnosed with Epstein-Barr virus (EBV)-HLH, 2 with EBV-induced primary HLH, and 1 with unclear etiology, among which 3 patients were co-infected with CMV. After the first-line treatment, 11 patients had no response, and 5 patients relapsed after complete response. Nine patients received the RU-L-DEP regimen, and 7 patients received the RU-DEP regimen. The overall response rate and complete response of RU-DEP+/-L treatment were 10/16 and 3/16, respectively. The negative conversion rate of plasma EBV-DNA was 7/15. The median follow-up time was 35.1 (2.4, 40.7) months, and 9/16 patients were survival. The 3-year overall survival rate after RU-DEP+/-L treatment in response and accepted hematopoietic stem cell transplantation (HSCT) was higher than that without response and did not receive HSCT (P=0.048). Among the 16 patients, 9 had varying degrees of myelosuppression, and 13 had an infection. Conclusions: RU-DEP+/-L can be used as a salvage treatment in R/R pediatric HLH, which can provide a bridge to HSCT and play an important role in the control of HLH. The main adverse reactions are myelosuppression and infection, which can be tolerated.

[Three-dimentional radiographic features of 67 maxillary radicular cysts].

OBJECTIVE: To analyze the three-dimensional radiographic characteristics of maxillary radi-cular cysts using cone-beam computed tomography (CBCT) and spiral CT. METHODS: Clinical records, histopathological reports, and CBCT or non-enhanced spiral CT images of 67 consecutive patients with maxillary radicular cysts were retrospectively acquired, and radiographic features, including size, shape, expansion, internal structure and relationship with the surrounding tissues, were analyzed. The lesions were divided into three types according to the involved tooth number, as follows: type Ⅰ (single tooth), the epicenter of the cyst was located at the apex of a nonvital tooth, without involvement of the neighbo-ring tooth; type Ⅱ (adjacent tooth involvement), the cyst was located at the apex of a nonvital tooth with involvement of the mesial and/or distal tooth root; and type Ⅲ (multi-teeth), the cyst involved the apexes of ≥4 teeth. Besides, these cysts were classified as another three types on sagittal views, as follows: centripetal, the root apex was oriented centripetally to the center of the cyst; palatal, the cyst was located mainly at the palatal side of the apex; and labial/buccal, the cyst was located mainly at the labial/buccal side of the apex. RESULTS: Totally, 67 patients with maxillary radicular cysts were acquired, including 38 males and 29 females, and their ages ranged from 13 to 77 years. Among them, 46 lesions (68.7%) were located in the anterior maxilla and 65 (97.0%) were round or oval. Labial/buccal cortex expansion was present in 43 cases (64.2%) and palatal cortex expansion in 37 cases (55.2%). The nasal floor was invaded in 27 cases (40.3%), the maxillary sinus was invaginated in 26 cases (38.8%), and root resorption was present in 9 cases (13.4%). The average diameter of lesions was (20.89±8.11) mm mesio-distally and (16.70±5.88) mm bucco-palatally. In spite of the 4 residual cysts, the remaining 63 lesions included 14 type Ⅰ, 26 type Ⅱ and 23 type Ⅲ cysts according to the involved tooth number. Besides, the 63 lesions included 46 centripetal, 15 palatal and 2 buccal cysts on sagittal views. CONCLUSION: The maxillary radicular cysts were frequently well-circumscribed round or oval radiolucency, with significantly different sizes. According to the involved tooth number, it can be divided into single tooth, adjacent tooth involvement and multi-teeth types. On sagittal views, the root-cyst relationship was centripetal in most cases, while a minority of cysts expanded palatally or buccally.

[Epidemiological analysis of non-enterovirus 71 and non-coxsackievirus A16 enterovirus].

Enteroviruses (EV) are the most common pathogens in humans, often causing large-scale infectious diseases, such as: hand, foot and mouth disease, herpes angina, myocarditis, encephalitis, aseptic meningitis, acute flaccidity Paralysis and acute flaccid myelitis and other nervous system and cardiopulmonary diseases, and them often infect children under 5 years old, severely can cause fatal complications. In recent years, the prevalence of non-enteric virus A71 (EV71) and non-coxsackievirus A16 (CV-A16) enteroviruses has gradually increased, and the dominant strains of EVs have gradually changed. A timely grasp of the etiology, epidemiology, and molecular evolution characteristics of EVs is of great significance to the prevention and control of EVs. Therefore, this article reviews the current status of diseases caused by non-EV71 and non-CV-A16 enteroviruses and analysis the molecular epidemiology, in order to have a certain prompting effect on the prevention and control of EVs.

[Rapamycin activates autophagy by inhibiting mTOR pathway to alleviate early osteoporosis in rats with skeletal fluorosis].

Objective: To investigate the effects of rapamycin target protein (mTOR) pathway and autophagy on bone formation and bone resorption in fluorosis osteoporosis in rats. Methods: In September 2018, a rat model of skeletal fluorosis was established by intragastric administration of fluorine. The experimental animals were divided into control group, 10 mgF(-)/kg group, 20 mgF(-)/kg group, 2 mg/kg rapamycin (RAPA) +10 mgF(-)/kg group and 2 mg/kg RAPA+20 mgF(-)/kg group, 20 per group. The experiment lasted for 3 months. The changes of bone tissue in rats were observed by hematoxylin-eosin (HE) staining. Bone mineral density (BMD) and biomechanical indexes, such as Modulus of elasticity, Stiffness, Maximum stress and Maximum load, were measured by BMD and biomechanical biometer. Serum levels of alkaline phosphatase (ALP) , osteocalcin (BGP) , osteoprotectin (OPG) , type I procollagen amino-terminal peptide (PINP) , tartrate-resistant acid phosphatase (TRACP) and nuclear factor kappa B receptor activator ligand (RANKL) were determined by enzymatic linked immunosorbent assay (ELISA) . Bone tissue phosphorylated mTOR (p-mTOR) , autophagy-related index selective autophagy adaptor protein p62, microtubule associated protein II (LC3-II) , ALP, osteoblastic transcription factor (Osterix) , and RNT Expression of related transcription factor 2 (Runx2) and bone resorption indicator RANKL were detected by Western blotting. Results: Compared with the control group, dental fluorosis in the 10 mgF(-)/kg and 20 mgF(-)/kg groups was significantly increased, periosteum thickness and absorption lacunae appeared, and BGP, OPG, PINP, TRACP and RANKL in serum contents were increased (P<0.05) , BMD, Modulus of elasticity, Stiffness, Maximum stress and Maximum load of bone tissue decreased significantly (P<0.05) , and the expressions of p-mTOR and p62 were decreased (P<0.05) , also the expressions of ALP, Osterix, Runx2 and RANKL were increased (P<0.05) . Compared with 10 mgF(-)/kg and 20 mgF(-)/kg groups, there were no obvious dental fluorosis symptoms in 2 mg/kg RAPA+10 mgF(-)/kg group and 2 mg/kg RAPA+20 mgF(-)/kg group, and serum ALP, BGP and OPG levels were significantly increased (P<0.05) . TRACP and RANKL contents were significantly decreased (P<0.05) . BMD, Modulus of elasticity, Stiffness, Maximum stress and Maximum load were significantly increased (P<0.05) . The levels of p-mTOR, p62 and RANKL in bone tissues were decreased (P<0.05) , and the expressions of LC3-II, LC3-II/LC3-I, ALP, Osterix and Runx2 were increased (P<0.05) . Conclusion: RAPA may activate autophagy by inhibiting mTOR phosphorylation, and inhibit bone resorption while promoting bone formation, thus alleviating early osteoporosis in skeletal fluorosis rats.

Characteristics of Chinese patients with primary Sjögren's syndrome: preliminary report of a multi-centre registration study.

BACKGROUND: We established a multi-centre online registry for primary Sjögren's syndrome (pSS) in China, and compared Chinese patients with those from other countries. METHODS: Data were from 87 rheumatology centres in 27 provinces. All 2986 patients had pSS according to the 2002 American-European Consensus Group or the 2016 American College of Rheumatology/European League Against Rheumatism. All centres used the same methods. Data on demographics, clinical parameters, laboratory results, disease activity and treatments were examined. RESULTS: The female:male ratio was 22.9:1, and the mean age at onset was 46.31 years. A total of 332 (11.1%) patients had thyroid disease, including hyperthyroidism (1.2%), hypothyroidism (6.0%) and subacute thyroiditis (3.9%). Dry eye had a prevalence of 68.59% in Chinese patients, 93.7-96% in European patients and 97.3% in American patients. Dry mouth had a prevalence of 86.5% in Chinese patients, 93.2-96% in European patients and 97.9% in American patients. Fewer Chinese than European patients had arthritis (6.9% vs. 15-19.3%). ANA positivity was 90.7% in Chinese, 81.3% in European and 77.6% in American patients. Anti-SSA antibody positivity was 84.6% in Chinese, 71% in European and 68.2% in American patients. The most commonly used drugs in Chinese patients were hydroxychloroquine (n = 1818; 67.5%), glucocorticoids (n = 1720; 63.9%) and total glucosides of paeony (n = 1120; 41.7%). CONCLUSIONS: This study provided information on the phenotypes of Chinese patients with pSS, and identified several differences with patients from other geographical regions.

[Preliminary study on three digital analysis methods for analyzing the distribution and area of occlusal contacts].

OBJECTIVE: To analyze the distribution and area of occlusal contacts of clinical dental model using three kinds of digital analysis methods, to compare the results of these methods and traditional occlusal analysis method, and to further analyze the characteristics of each digital analysis method. METHODS: A set of plaster models of normal subjects was selected. The models were scanned by lab scanner 3shape E4 and the files were exported in a stereolithography file format. In 3D analysis software Geomagic Studio 2013 and Geomagic Qualify 2013, the corresponding results of 3D occlusal contact distribution and occlusal contact area were obtained through three digital analysis methods: "3D color difference map method", "point cloud analysis method", and "virtual articulating paper method". The occlusal contact distribution and occlusal contact area were also obtained by two traditional occlusal analysis methods: "silicone interocclusal recording material method" and "scanned articulating paper mark method". A threshold of 100 µm was used to analyze the occlusal contacts and 100 µm was also the thickness of articulating paper used in this study. The results of these five different occlusal analysis methods were evaluated qualitatively and quantitatively. RESULTS: The results of 3D occlusal contact distribution obtained by the above five methods were basically consistent. The total occlusal contact area obtained by 3D color difference map method, point cloud analysis method, virtual articulating paper method, silicone interocclusal recording material method and scanned articulating paper mark method were 133.10 mm², 142.08 mm², 128.95 mm², 163.31 mm², and 100.55 mm² respectively. There was little difference between the results of three digital analysis methods. The results of occlusal contact area obtained by the digital methods and the traditional methods were different. CONCLUSION: The three digital analysis methods can provide reliable and accurate analysis results of occlusal contact distribution and occlusal contact area of dental model. The results obtained by these methods can serve as references for the digital occlusal surface design of dental prosthesis and clinical occlusal analysis.

[In vitro evaluation of the application of digital individual tooth tray in the impression making of mandibular full-arch crown abutments].

OBJECTIVE: To establish a method for the production of digital individual tooth tray based on three-dimensional (3D) scan, computer-aided design (CAD) and 3D printing, and to evaluate the effect of impression taking of full-arch crown abutments by digital individual tooth tray technique and conventional method through in vitro study. METHODS: The full crown preparation was performed on all the fourteen resin teeth in a standard model of mandibular dentition. The surface data of prepared abutments was collected by 3D scanning. A new project was created in a dental CAD software including all the fourteen teeth in the mandibular dentition. The design modules of anatomy crown and coping were selected for each tooth. The dentition was divided for three sections: right posterior teeth, anterior teeth, and left posterior teeth areas. The connector design was added between the abutments within the same section. The scanned data of the abutments were imported. The occlusal plane and insertion path were determined. The position of margin line, as well as the shape of anatomy crown and connector as the main body of the individual tooth tray were designed for each abutment. The shape of coping was generated as the space for holding the impression material. The finalized data of the main body was imported into Geomagic software. The retentive attachment was added at the external surface and the tissue stop was formed at the internal surface. The completed individual tooth tray was manufactured by 3D printing with resin material. The data of full-arch crown abutments were modified and printed. The conventional dentition trays A and B, as well as digital individual tooth tray were designed and printed for four copies each. The polyether impressions of the full-arch abutments were made by conventional one-step method using dentition tray A, and by sectional-impression technique using digital individual tooth tray and dentition tray B for four times each. The time spent for each impression taking and the numbers of defects at the shoulder and axial/occlusal surface in each impression were recorded. The impression quality of each abutment was evaluated. The overall quality distribution and the pass rate of abutments between the two methods were analyzed. RESULTS: The impressions made by conventional method had more defects at shoulder than those made by digital individual tooth tray technique. No difference of the number of defects at axial/occlusal surface between the two methods was observed. The digital individual tooth tray technique for the full-arch abutment impression exhibited higher pass rate of abutments and better quality of impression, compared with conventional methods. CONCLUSION: A new method for the production of digital individual tooth tray based on digital scanning, CAD and 3D printing was established. Compared with conventional method, using digital individual tooth tray technique for impression taking of full-arch abutments can achieve better effect.

[Radiography study on osteotome sinus floor elevation with placed implant simultaneously with no graft augmentation].

OBJECTIVE: To investigate the change of endo-sinus bone height and bone volume in osteotome sinus floor elevation (OSFE) without bone graft but placing implants simultaneously by using cone beam computed tomography (CBCT) and three dimensional analysis, and to find the impacting factors on endo-sinus bone augmentation. METHODS: OSFE was performed in 38 edentulous patients with missing teeth at posterior maxillary region, and 44 implants were placed and referred for OSFE using no graft materials. CBCT was performed pre-surgery and 9－68 months post-surgery when the patients encountered another implant surgery. The gained bone height at mesial, distal, buccal and palatal sites around the implant in sinus were measured, volumetric measurements of the endo-sinus gained bone volume (ESGBV) in the elevated region were calculated by Mimics software. Univariate analysis and multiple linear regression were performed to investigate the impacting factors on the gained bone height and ESGBV. Marginal bone loss was recorded according to the periapical radiography after implant restoration. RESULTS: The mean residual bone height (RBH) pre-surgery was (3.41±1.23) mm, the mean protruded length (PL) into sinus of implant post-surgery was (3.41±1.28) mm, the mean endo-sinus gained bone height was (2.44±1.23) mm at distal sites, (2.88±1.20) mm at mesial sites, (2.83±1.22) mm at buccal sites and (2.96±1.16) mm at palatal sites, the mean endo-sinus gained bone height at distal sites was significantly lower than the other three sites (P < 0.05). The average endo-sinus gained bone height was (2.78±1.13) mm. The mean ESGBV was (122.15± 73.27) mm3. Univariate analysis showed the more RBH, the less bone height gained in sinus, which existed at buccal, lingual, mesial and distal sites (P < 0.001), and the more RBH, the smaller ESGBV gained (P=0.012). The ESGBV was significantly higher in the subjects whose bone generation period was more than 24 months than those whose bone generation period less than 24 months (P=0.034). The more PL, the more bone height and ESGBV gained (P=0.008). Multivariate analysis showed after adjusting factors of gender, age, smoking, width of sinus floor, thickness of sinus membrane pre-surgery, diameter and length of the implant, PL and bone generation period was positively correlated with mean endo-sinus gained bone height and ESGBV, while RBH negatively correlated with mean endo-sinus gained bone height. During the follow-up, the mean marginal bone loss was 0 (0－1.41) mm and all the implants loaded successfully. CONCLUSION: OSFE without bone graft but with placed implant simultaneously can increase endo-sinus gained bone height and ESGBV. RBH, PL and bone generation period are the significant factors impacting endo-sinus bone augmentation.

[Accuracy of three intraoral scans for primary impressions of edentulous jaws].

OBJECTIVE: To provide a reference for using intraoral scanners for making clinical diagnostic dentures of edentulous jaws by comparing the accuracy of three intraoral scanners for primary impression and jaw relation record of edentulous jaws. METHODS: This study contained 6 primary impressions of the edentulous patients. Each of the impressions consisted of the maxillary primary impression, the mandibular primary impression and the jaw relation record. For each of them, a dental cast scanner (Dentscan Y500) was used to obtain stereolithography (STL) data as reference scan, and then three intraoral scanners including i500, Trios 3 and CEREC Primescan were used for three times to obtain STL data as experiment groups. In Geomagic Studio 2013 software, trueness was obtained by comparing experiment groups with the reference scan, and the precision was obtained from intragroup comparisons. Registered maxillary data of the intraoral scan with reference scan, the morphological error of jaw relation record was obtained by comparing jaw relation record of the intraoral scan with the reference scan. Registered mandibular data with jaw relation record of intraoral scan and the displacement of the jaw position were evaluated. Independent samples t test and Mann-Whitney U test in the SPSS 20.0 statistical software were used to statistically analyze the trueness, precision and morphological error of jaw relation record of three intraoral scanners. The Bland-Altman diagram was used to evaluate the consistency of the jaw relationship measured by the three intraoral scanners. RESULTS: The trueness of i500, Trios 3 and CEREC Primescan scanners was (182.34±101.21) µm, (145.21±71.73) µm, and (78.34±34.79) µm for maxilla; (106.42±21.63) µm, and 95.08 (63.08) µm, (78.45±42.77) µm for mandible. There was no significant difference in trueness of the three scanners when scanning the maxilla and mandible(P>0.05). The precision of the three scanners was 147.65 (156.30) µm, (147.54±83.33) µm, and 40.30 (32.80) µm for maxilla; (90.96±30.77) µm, (53.73±23.56) µm, and 37.60 (93.93) µm for mandible. The precision of CEREC Primescan scanner was significantly better than that of the other two scanners for maxilla (P<0.05). Trios 3 and CEREC Primescan scanners were significantly better than i500 scanner for mandible (P<0.05). The precision of the i500 and Trios 3 scanners for mandible was superior to maxilla (P<0.05). The upper limit of 95% confidence intervals of trueness and precision of three scanners for both maxilla and mandible were within ±300 µm which was clinically accepted. The morphological error of jaw relation record of the three scanners was (337.68±128.54) µm, (342.89±195.41) µm, and (168.62±88.35) µm. The 95% confidence intervals of i500 and Trios 3 scanners were over 300 µm. CEREC Primescan scanner was significantly superior to i500 scanner(P<0.05).The displacement of the jaw position of the three scanners was (0.83±0.56) mm, (0.80±0.45) mm, and (0.91±0.75) mm for vertical dimension; (0.79±0.58) mm, (0.62±0.18) mm, and (0.53±0.53) mm for anterior and posterior directions; (0.95±0.59) mm, (0.69±0.45) mm, and (0.60±0.22) mm for left and right directions. The displacement of the jaw position of the three scanners in vertical dimension, anterior and posterior directions and the left and right directions were within the 95% consistency limit. CONCLUSION: Three intraoral scanners showed good trueness and precision. The i500 and Trios 3 scanners had more errors in jaw relation record, but they were used as primary jaw relation record. It is suggested that three intraoral scanners can be used for obtaining digital data to make diagnostic dentures and individual trays, reducing possible deforming or crack when sending impressions from clinic to laboratory.

[Accuracy of intercuspal occlusion in 3D reconstruction with the dental articulator position method].

OBJECTIVE: To evaluate the three-dimensional (3D) reconstruction accuracy of the intercuspal occlusion (ICO) of the dental casts, by the dental articulator position method, and provide a reference for clinical application. METHODS: The standard dental casts in ICO were mounted on average values articulator, and five pairs of milling resin cylinders were respectively attached to the base of both the casts. 100 µm articulating paper and occlusal record silicone rubber were used to detect the occlusal contact number between the posterior teeth of casts mounted on articulator in ICO. The occlusal contact numbers NA detected by the two methods were calculated simultaneously, as the reference. After the upper and lower casts were scanned separately, and the buccal data of casts in ICO were scanned with the aid of the dental articulator position, registration was carried out utilizing the registration software. Then the digital casts mounted in ICO as well as the buccal occlusal data were saved in standard tessellation language (STL) format. Geomagic Studio 2013 software was used to analyze the contact number NS between digital upper and lower casts by the "deviation analysis" function. The differences were compared between NS and NA, to evaluate the sensitivity and positive predict value (PPV) of the model scanner to reproduce the occlusal contact with the aid of dental articulator position. The distance DR between the centers of the circles at the top surface of the upper and lower corresponding cylinders was obtained by the three-coordinate measuring system Faro Edge, as the reference value. The Geomagic Studio 2013 software was used to construct the cylinders of digital casts and the distance DM between the centers of the circles at the top surface of the corresponding cylinders were measured, as the test value. The one-sample T test was used to analyze the variable differences between DM and DR. RESULTS: The PPV of reproducing the occlusal contact point was 0.76 and sensitivity was 0.81. The distance error of the opposite cylinder was (0.232±0.089) mm. There was no statistical difference between the feature points 5-5', while there were statistical differences between the other feature points. CONCLUSION: By the dental articulator position method, the model scanner reproduces the occlusal contact point with high sensitivity and PPV, and that meets clinical needs. Meanwhile, the distance between the feature points is greater than the reference value, which will lead to occlusal disturbance, and require clinical grinding.

[A method for constructing three-dimensional face symmetry reference plane based on weighted shape analysis algorithm].

OBJECTIVE: To establish a novel method based on three-dimensional (3D) shape analysis and weighted Procrustes analysis (WPA) algorithm to construct a 3D facial symmetry reference plane (SRP), automatically assigning weight to facial anatomical landmarks. The WPA algorithm suitability for commonly observed clinical cases of mandibular deviation were analysed and evaluated. METHODS: Thirty patients with mandibular deviation were recruited for this study. The 3D facial SRPs were extracted independently based on original-mirror alignment method. Thirty-two anatomical landmarks were selected from the overall region by three times to obtain the mean coordinate. The SRP of experimental groups 1 and 2 were using the standard Procrustes analysis (PA) algorithm and WPA algorithm, respectively. A reference plane defined by experts based on regional iterative closest point (ICP) algorithm, served as the ground truth. Three experts manually selecting facial regions with good symmetry for original model, and common region was included in the study. The angle error values between the SRP of WPA algorithm in the experimental group 1 and the truth plane were evaluated in this study, and the SRP of PA algorithm of experimental group 2 was calculated in the same way. Statistics and measurement analysis were used to comprehensively evaluate the clinical suitability of the WPA algorithm to calculate the SRP. A paired t-test analysis (two-tailed) was conducted to compare the angles. RESULTS: The average angle error between the SRP of WPA algorithm and the ground truth was 1.53°±0.84°, which was smaller than that between the SRP of PA and the ground truth (2.06°±0.86°). There were significant differences in the angle errors among the groups (P < 0.05). For the patients with severe mandibular deviation that the distance between pogonion and facial midline greater than 12 mm, the average angle error of the WPA algorithm was 0.86° smaller than that of the PA algorithm. CONCLUSION: The WPA algorithm, based on weighted shape analysis, can provide a more adaptable SRP than the standard PA algorithm when applied to mandibular deviation patients and preliminarily simulate the diagnosis strategies of clinical experts.