Biomineralized Piezoelectrically Active Scaffolds for Inducing Osteogenic Differentiation.

There is an endogenous electric field in living organisms, which plays a vital role in the development and regeneration of bone tissue. Therefore, self-powered piezoelectric material for bone repair has become hot research in recent years. However, the current piezoelectric materials for tissue regeneration still have the shortcomings of lack of biological activity and three-dimensional structure. Here, we proposed a three-dimensional polyurethane foam (PUF) scaffold coated with piezoelectric poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and modified by a calcium phosphate (CaP) mineralized coating. The preferred scaffold has an open circuit voltage and short circuit current output of 5 V and 200 nA. Combining the physical and chemical properties of the CaP coating, the piezoelectric signal of PVDF-HFP and the three-dimensional structure of PUF, the scaffold exhibits superior promotion of cell osteogenic differentiation and ectopic bone formation in vivo. The mechanism is attributed to an increase in intracellular Ca2+ levels in response to chemical and piezoelectric stimulation with the material. This research not only paves the way for the application of piezoelectric scaffolds to stimulate osteoblasts differentiation in situ, but also lays the foundation for the clinical treatment of long-term osteoporosis.

Bone induction and defect repair by true bone ceramics incorporated with rhBMP-2 and Sr.

OBJECTIVE: To study the bone induction and defect repair of true bone ceramics (TBC) combined with rhBMP-2 and Sr. METHODS: MC3T3-E1 cells were used to evaluate the bioactivity of the composite. Cell proliferation activity was detected by CCK-8, ALP activity was detected by p-nitrophenyl phosphate (PNPP), and the differences of material surface topography were observed by scanning electron microscopy (SEM). Bone induction was verified by the implantation in nude mice. The rabbit femoral condyle defect model was achieved to verify the bone defect repair ability of the material. RESULTS: SEM results showed nearly the same surface morphology and cell proliferation quantified by CCK-8 showed that compared with TBC, both TBC&Sr and TBC&BMP-2&Sr had a significant promoting effect (P < 0.05). ALP activity result showed that the ALP activity of TBC&BMP-2&Sr was significantly higher than that of TBC alone (P < 0.05). The bone induction result showed that TBC&Sr had a small amount of new bone formation, and the new bone area was only 2.5 ± 0.11%. The bone induction activity of TBC&BMP-2&Sr was the highest, the new bone area was up to 75.36 ± 4.21%. Histological result of bone defect repair showed that TBC&BMP-2&Sr was also the highest, the new bone area was up to 72.42 ± 3.14%. The repair effect of TBC& BMP-2 was second, and better than that of TBC&Sr. CONCLUSION: TBC combined with rhBMP-2 and Sr had the good bioactivity, obvious bone conduction and bone defect repair performance, laying the foundation of clinical application potentially.

Open Reduction and Internal Fixation Strategy For Treatment of Comminuted Mandibular Fracture.

PURPOSE: The aim of this study was to evaluate the treatment strategy of open reduction and internal fixation (ORIF) for comminuted mandibular fracture (CMF). METHODS: Clinical studies about CMF were collected. Detailed information was extracted, and data were analyzed and merged from included articles. RESULTS: Twelve studies, including 338 patients with CMF, were reported. A total of 256 patients receive ORIF among these 338 patients, and exhibited followed characteristics: ORIF usually were performed several days after injury; the extraoral approach for ORIF was used for 103 patients among 205 patients who received ORIF with definite information about surgical approach; titanium mesh, or reconstruction plate, combined with mini-plates was used in 17 and 194 patients, respectively; intermaxillary fixation (IMF) usually persisted about 1 to 3 weeks after ORIF; most patients exhibited satisfactory effect without serious complications, and the complication rate varied from 0 to 42%. CONCLUSIONS: ORIF strategy for treatment of CMF including: ORIF was a priority choice for CMF. ORIF usually was performed at several days after injury. Reconstruction plate, or titanium mesh, combined with mini-plates was recommended for ORIF surgery. After ORIF, IMF usually was recommended for about 1 to 3 weeks.

Iron oxide nanoparticles in liquid or powder form enhanced osteogenesis via stem cells on injectable calcium phosphate scaffold.

The objectives of this study were to incorporate iron oxide nanoparticles (IONPs) into calcium phosphate cement (CPC) to enhance bone engineering, and to investigate the effects of IONPs as a liquid or powder on stem cells using IONP-CPC scaffold for the first time. IONP-CPCs were prepared by adding 1% IONPs as liquid or powder. Human dental pulp stem cells (hDPSCs) were seeded. Subcutaneous implantation in mice was investigated. IONP-CPCs had better cell spreading, and greater ALP activity and bone mineral synthesis, than CPC control. Subcutaneous implantation for 6 weeks showed good biocompatibility for all groups. In conclusion, incorporating IONPs in liquid or powder form both substantially enhanced hDPSCs on IONP-CPC scaffold and exhibited excellent biocompatibility. IONP incorporation as a liquid was better than IONP powder in promoting osteogenic differentiation of hDPSCs. Incorporating IONPs and chitosan lactate together in CPC enhanced osteogenesis of hDPSCs more than using either alone.

Shear Flow-Assembled Janus Membrane with Bifunctional Osteogenic and Antibacterial Effects for Guided Bone Regeneration.

Guided bone regeneration (GBR) membranes that reside at the interface between the bone and soft tissues for bone repair attract increasing attention, but currently developed GBR membranes suffer from relatively poor osteogenic and antibacterial effects as well as limited mechanical property and biodegradability. We present here the design and fabrication of a bifunctional Janus GBR membrane based on a shear flow-driven layer by a layer self-assembly approach. The Janus GBR membrane comprises a calcium phosphate-collagen/polyethylene glycol (CaP@COL/PEG) layer and a chitosan/poly(acrylic acid) (CHI/PAA) layer on different sides of a collagen membrane to form a sandwich structure. The membrane exhibits good mechanical stability and tailored biodegradability. It is found that the CaP@COL/PEG layer and CHI/PAA layer contribute to the osteogenic differentiation and antibacterial function, respectively. In comparison with the control group, the Janus GBR membrane displays a 2.52-time and 1.84-time enhancement in respective volume and density of newly generated bone. The greatly improved bone repair ability of the Janus GBR membrane is further confirmed through histological analysis, and it has great potential for practical applications in bone tissue engineering.

Surface demineralized freeze-dried bone allograft followed by reimplantation in a failed mandibular dental implant.

The removal of a failed implant with high torque causes significant damage to the surrounding tissue, compromising bone regeneration and subsequent osseointegration in the defect area. Here, we report a case of carrier screw fracture followed by immediate implant removal, bone grafting and delayed reimplantation. A dental implant with a fractured central carrier screw was removed using the bur-forceps technique. The resulting three-wall bone defect was filled with granular surface demineralized freeze-dried bone allograft (SD-FDBA). Cone-beam computerized tomography was performed at 1 week, 6 months and 15 months postoperatively and standardized for quantitative evaluation. The alveolar bone width and height at 15 months post-surgery were about 91% of the original values, with a slightly lower bone density, calculated using the gray value ratio. The graft site was reopened and was found to be completely healed with dense and vascularized bone along with some residual bone graft. Reimplantation followed by restoration was performed 8 months later. The quality of regenerated bone following SD-FDBA grafting was adequate for osseointegration and long-term implant success. The excellent osteogenic properties of SD-FDBA are attributed to its human origin, cortical bone-like structure, partly demineralized surfaces and bone morphogenetic protein-2-containing nature. Further investigation with more cases and longer follow-up was required to confirm the final clinical effect.

Additively Manufactured Zn-2Mg Alloy Porous Scaffolds with Customizable Biodegradable Performance and Enhanced Osteogenic Ability.

The combination of bioactive Zn-2Mg alloy and additively manufactured porous scaffold is expected to achieve customizable biodegradable performance and enhanced bone regeneration. Herein, Zn-2Mg alloy scaffolds with different porosities, including 40% (G-40-2), 60% (G-60-2), and 80% (G-80-2), and different unit sizes, including 1.5 mm (G-60-1.5), 2 mm (G-60-2), and 2.5 mm (G-60-2.5), are manufactured by a triply periodic minimal surface design and a reliable laser powder bed fusion process. With the same unit size, compressive strength (CS) and elastic modulus (EM) of scaffolds substantially decrease with increasing porosities. With the same porosity, CS and EM just slightly decrease with increasing unit sizes. The weight loss after degradation increases with increasing porosities and decreasing unit sizes. In vivo tests indicate that Zn-2Mg alloy scaffolds exhibit satisfactory biocompatibility and osteogenic ability. The osteogenic ability of scaffolds is mainly determined by their physical and chemical characteristics. Scaffolds with lower porosities and smaller unit sizes show better osteogenesis due to their suitable pore size and larger surface area. The results indicate that the biodegradable performance of scaffolds can be accurately regulated on a large scale by structure design and the additively manufactured Zn-2Mg alloy scaffolds have improved osteogenic ability for treating bone defects.

Infection-Sensitive SPION/PLGA Scaffolds Promote Periodontal Regeneration via Antibacterial Activity and Macrophage-Phenotype Modulation.

Inflammation caused by a bacterial infection and the subsequent dysregulation of the host immune-inflammatory response are detrimental to periodontal regeneration. Herein, we present an infection-sensitive scaffold prepared by layer-by-layer assembly of Feraheme-like superparamagnetic iron oxide nanoparticles (SPIONs) on the surface of a three-dimensional-printed polylactic-co-glycolic acid (PLGA) scaffold. The SPION/PLGA scaffold is magnetic, hydrophilic, and bacterial-adhesion resistant. As indicated by gene expression profiling and confirmed by quantitative real-time reverse transcription polymerase chain reaction and flow cytometry analysis, the SPION/PLGA scaffold facilitates macrophage polarization toward the regenerative M2 phenotype by upregulating IL-10, which is the molecular target of repair promotion, and inhibits macrophage polarization toward the proinflammatory M1 phenotype by downregulating NLRP3, which is the molecular target of anti-inflammation. As a result, macrophages modulated by the SPS promote osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSCs) in vitro. In a rat periodontal defect model, the SPION/PLGA scaffold increased IL-10 secretion and decreased NLRP3 and IL-1ß secretion with Porphyromonas gingivalis infection, achieving superior periodontal regeneration than the PLGA scaffold alone. Therefore, this antibacterial SPION/PLGA scaffold has anti-inflammatory and bacterial antiadhesion properties to fight infection and promote periodontal regeneration by immunomodulation. These findings provide an important strategy for developing engineered scaffolds to treat periodontal defects.

Effective Scald Wound Functional Recovery Patch Achieved by Molecularly Intertwined Electrical and Chemical Message in Self-Adhesive Assemblies.

Bioactive materials that communicate with bio-tissues via simultaneous chemical and electrical information promise an advanced medical treatment strategy. Rational design of simultaneous chemically and electrically active materials is still challenging. In this study, we develop a bioactive wound healing patch that enables functional recovery of scald skin wounds by integrating electrically and chemically active units at the molecular level. The patch should be used with massages for 10 min daily during the recovery process. This healing patch consists of a closely intertwined piezoelectric poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF) film and a self-adhesive poly(N,N-dimethylacrylamide) (PDMAA) hydrogel layer, which permits itself to adhere on skin wounds reversibly. Frequency-dependent electrical and chemical dose delivery is achieved in response to mechanical stimuli via the electrical-chemical crosstalk within the healing patch. Animal scald experiments show that the patch can effectively guide the functional recovery of grade I and shallow grade II scald wounds, promoting proper collagen deposition and hair follicle, blood vessel, and gland regeneration. Integrating electrically and chemically active units at the molecular level in treatment devices provides a new design concept for tissue engineering and medical treatment materials.

Impact of occlusal contact pattern on dental stability and oromandibular system after orthodontic tooth movement in rats.

How to ensure dental stability in new positions and reduce the likelihood of relapse is a major clinical concern in the orthodontic field. Occlusal contacts between arches may affect the transmission of masticatory forces, thereby influencing the biological response of the periodontal and the oromandibular system. Occlusion factors that may influence the stability after orthodontic tooth movement (OTM) remain largely unknown. Hence, this research was conducted in order to investigate the influence of different occlusal contact patterns on tooth stability and oromandibular system including the masseter muscle and the temporomandibular joint following OTM. By modifying the occlusal surfaces, in vivo animal study models with distinct occlusal patterns corresponding to clinical circumstances were established. The relapse distance of teeth and the level of inflammatory factors in the gingival cervical fluid were analyzed. We also closely observed the histological remodeling of periodontal tissue, masseter tissue, and joint tissue after one week of relapse. Moreover, genes expression in the alveolar bone was analyzed to illustrate the potential biological mechanisms of relapse under the influence of different occlusal contact patterns following OTM. Different occlusal contact patterns after OTM in rats were established. The intercuspation contact between cusp and fossa group exhibited the lowest level of relapse movement, inflammatory factors and osteoclast activity (P < 0.05). On the other hand, groups with interferences or inadequate contacts exhibited more relapse movement, and tend to promote inflammation of periodontal tissue and activate bone resorption (P < 0.05). Adequate occlusal contacts without interference may enhance tooth stability and reduce the likelihood of relapse. After active orthodontic treatment, necessary occlusal adjustment should be made to achieve the desired intercuspation contact relationship and ensure adequate contact between the arches. The elimination of occlusal interferences is crucial to achieving optimal stability and promoting overall healthy condition of the oromandibular system.

Effect of local application of bone morphogenetic protein -2 on experimental tooth movement and biological remodeling in rats.

Background: This study attempts to detect the potential effects of local bone morphogenetic protein -2 (BMP-2) on orthodontic tooth movement and periodontal tissue remodeling. Methods: Forty adult SD rats were randomly divided into four groups: blank control group, unilateral injection of BMP-2 on the pressure side or tension side of orthodontic teeth and bilateral injection of BMP-2. Their maxillary first molar was moved by a 30 g constant force closed coil spring. 60 µL of BMP-2 with a concentration of 0.5 µg/mL was injected into each part at a time. In addition, three rats were selected as healthy control rats without any intervention. Fluorescent labeled BMP-2 was used to observe the distribution of exogenous BMP-2 in tissues. Micro-CT was used to measure the microscopic parameters of tooth displacement, trabecular bone and root absorption volume. Three different histological methods were used to observe the changes of tissue remodeling, and then the number of osteoclasts and the content of collagen fibers were calculated. Results: Compared with the blank control group, BMP-2 injection reduced the movement distance and increased the collagen fiber content and bone mass (p < 0.01). There was no significant difference in tooth movement distance, BV/TV ratio and BMD between injection sites in unilateral injection group (p > 0.05). In the case of bilateral injection of BMP-2, the osteogenesis is enhanced. Unilateral injection of BMP-2 did not promote root resorption, but double injection showed root resorption (p < 0.01). Conclusion: Our study does show that the osteogenesis of BMP-2 is dose-dependent rather than site-dependent when a certain amount of BMP-2 is applied around orthodontic teeth. Local application of BMP-2 around orthodontic teeth in an appropriate way can enhance bone mass and tooth anchorage without increasing the risk of root absorption volume. However, high levels of BMP-2 may cause aggressive root resorption. These findings are of great significance, that is, BMP-2 is an effective target for regulating orthodontic tooth movement.

A Shapable Alginate Hydrogel Resolving the Conflicts between Multifunctionality and Fabrication Simplicity.

Alginate is a naturally derived biocompatible polymer widely used as a drug or food adjuvant. However, its usage as a biofunctional material has been confounded by the lack of shapable strategies. In this study, we report an easily applied ionic cross-linking strategy for fabricating shapable multifunctional SA-Ca(II) hydrogels employing the process of regulated diffusion. The fabrication proceeds in neutral solutions under ambient conditions. The obtained SA-Ca(II) hydrogel presents tunable moduli ranging from 4 to 30 kPa, resembling a series of human tissues. The tunable mechanical strength provides differentiation signals for stem cell polarization. The hydrogel film can lift a weight of 10 kg. The hydrogel can be prepared into various shapes and remains stable over one year upon rinsing in deionized water, but rapidly degrades in alginate lyase solutions. Subcutaneously embedded SA-Ca(II) hydrogels in mice show high biocompatibility and degrade over 4 weeks accompanied by hair follicle regeneration. Wearable protections as well as stimuli-responsive electronic circuits are then achieved, which not only protect the model body against high-temperature environments but also show warning signals when the protection loses effectiveness because of high temperatures. Overall, these results demonstrate that our SA-Ca(II) hydrogel offers appealing comprehensive functionalities from multifaceted perspectives, including mechanical strength, economic and environmental considerations, transparency, forming capability, biocompatibility, and conductivity.

A healing promoting wound dressing with tailor-made antibacterial potency employing piezocatalytic processes in multi-functional nanocomposites.

Developing a novel antibiotics-free antibacterial strategy is essential for minimizing bacterial resistance. Materials that not only kill bacteria but also promote tissue healing are especially challenging to achieve. Inspired by chemical conversion processes in living organisms, we develop a piezoelectrically active antibacterial device that converts ambient O2 and H2O to ROS by piezocatalytic processes. The device is achieved by mounting nanoscopic polypyrrole/carbon nanotube catalyst multilayers onto piezoelectric-dielectric films. Under stimuli by a hand-held massage device, the sterilizing rates for S. aureus and E. coli reach 84.11% and 94.85% after 10 minutes of operation, respectively. The antibacterial substrate at the same time preserves and releases drugs and presents negligible cytotoxicity. Animal experiments demonstrate that daily treatment for 10 minutes using the device effectively accelerates the healing of infected wounds on the backs of mice, promoting hair follicle generation and collagen deposition. We believe that this report provides a novel design approach for antibacterial strategies in medical treatment.

Superparamagnetic Iron Oxide Nanoparticles Protect Human Gingival Fibroblasts from Porphyromonas gingivalis Invasion and Inflammatory Stimulation.

INTRODUCTION: Modulating the inflammatory response of human gingival fibroblasts (hGFs) is important for the control of periodontal inflammation because it is a key event in the pathogenesis of periodontitis. Here, we aimed to determine whether polyglucose sorbitol carboxymethyl ether (PSC)-coated superparamagnetic iron oxide nanoparticles (SPIONs) protect hGFs against invasion and inflammatory stimulation by Porphyromonas gingivalis (P. gingivalis). METHODS: First, we determined the cytotoxicity and antimicrobial activity of PSC-SPIONs. Then, their effects on invasion of hGFs by P. gingivalis were evaluated by counting invading P. gingivalis, fluorescence staining, and transmission electron microscopy. The effect of PSC-SPIONs on inflammation in hGFs induced by P. gingivalis lipopolysaccharide was evaluated by measurement of reactive oxygen species (ROS), and enzyme-linked immunosorbent assays, quantitative reverse transcription-polymerase chain reaction, and Western blotting of key indicator molecules. The effects of dimercaptosuccinic acid (DMSA)-coated SPIONs and the free form of PSC alone were also tested and compared with those of PSC-SPIONs. RESULTS: PSC-SPIONs (25 µg/mL) are cytocompatible with hGFs and exhibit no antimicrobial effects on P. gingivalis. However, they inhibit invasion of hGFs by P. gingivalis at 15 µg/mL. They also decrease ROS production and inflammatory cytokine secretion by hGFs at 5, 15, and 25 µg/mL, by downregulating activation of the nuclear factor-kappa B signaling pathway. Furthermore, PSC alone does not inhibit inflammation, while DMSA-SPIONs do. This indicates that the nanosize effects of PSC-SPIONs, rather than their coating material, play the dominant role in their anti-inflammatory activity. CONCLUSION: PSC-SPIONs protect hGFs against P. gingivalis invasion and inflammatory stimulation. Thus, they have potential for clinical application in control of periodontal inflammation.

Synthesis and cellular biocompatibility of two nanophase hydroxyapatite with different Ca/P ratio.

The cellular biocompatibility of two types of nanophase hydroxyapatites including nanophase standard hydroxyapatite (n-HA) and nanophase calcium deficient hydroxyapatite (n-CDHA) synthesized by a wet chemical method were assessed using primary cultured osteoblasts. Cytotoxicity of both materials was investigated with L929 cell line. The MTT method was used to evaluate the proliferation of osteoblasts on the third day and ALP activity assay was carried out on the fifth day. SEM was used to observe the morphology of the osteoblasts on the third day. Two types of nanophase hydroxyapatite both showed no cytotoxicity. Higher cell proliferation was observed on n-CDHA than n-HA. At the same time, cells spread more actively on the n-CDHA group. The ALP level of n-CDHA was also significantly higher on the former. Our results show that the n-CDHA is more suitable for osteoblasts growth and is also helpful for ALP synthesis.

Recent Development of Alginate-Based Materials and Their Versatile Functions in Biomedicine, Flexible Electronics, and Environmental Uses.

Alginate is a natural polysaccharide that is easily chemically modified or compounded with other components for various types of functionalities. The alginate derivatives are appealing not only because they are biocompatible so that they can be used in biomedicine or tissue engineering but also because of the prospering bioelectronics that require various biomaterials to interface between human tissues and electronics or to serve as electronic components themselves. The study of alginate-based materials, especially hydrogels, have repeatedly found new frontiers over recent years. In this Review, we document the basic properties of alginate, their chemical modification strategies, and the recent development of alginate-based functional composite materials. The newly thrived functions such as ionically conductive hydrogel or 3D or 4D cell culturing matrix are emphasized among other appealing potential applications. We expect that the documentation of relevant information will stimulate scientific efforts to further develop biocompatible electronics or smart materials and to help the research domain better address the medicine, energy, and environmental challenges faced by human societies.

Biofriendly molecular and protein release substrate with integrated piezoelectric motivation and anti-oxidative stress capabilities.

Self-powered piezoelectrically active molecular or protein delivery devices have provoked great interest in recent years. However, electric fields used to promote delivery or healing may also induce the redox of water or oxygen to generate reactive oxygen species (ROS) and bring unintended oxidative pressure to the organism and harm biological functions. In addition, protein molecules are easily inactivated in the polymer reservoir matrix due to the pull of strong electrostatic effects. In this study, a multifunctional molecular delivery substrate was fabricated by integrating a piezoelectric-dielectric polymeric substrate, nanoscopic polyelectrolyte films and in-film deposited biomimetic porous CaP coating. The piezoelectric substrate promoted molecular release, and the mineralized coating effectively stored molecules or proteins and simultaneously eliminated ROS, reducing the oxidative stress response generated by oxidative pressure. The present work opens a new way for the development of multifunctional and biofriendly drug delivery devices.

Amino Acid-Modified Conjugated Oligomer Self-Assembly Hydrogel for Efficient Capture and Specific Killing of Antibiotic-Resistant Bacteria.

Bacterial infection is one of main causes that threaten global human health. Especially, antibiotic-resistant bacteria like methicillin-resistant Staphylococcus aureus (MRSA) lead to high mortality rate and more expensive treatment cost. Here, a novel amino-acid-modified conjugated oligomer OTE-d-Phe was synthesized by modifying the side chain of conjugated oligo(thiophene ethynylene) with d-phenylalanine. By mixing 9-fluorenylmethyloxycarbonyl-l-phenylalanin (Fmoc-l-Phe) with OTE-d-Phe, a new and biocompatible low-molecular weight hydrogel (HG-2) was prepared through self-assembly. In solution, HG-2 can effectively capture bacteria spontaneously, such as Escherichia coli and MRSA. Most importantly, the hydrogel has specific and strong antibacterial activity against MRSA over methicillin-susceptible S. aureus, Staphylococcus epidermidis, and E. coli. Interestingly, when the hydrogel was put on a model surface, a piece of cloth, it also is able to selectively kill MRSA with low cell cytotoxicity. The antibacterial mechanism was investigated, and it demonstrated that the HG-2 interacts with and physically breaks the cell wall and membrane, which leads to MRSA death. Therefore, this new conjugated oligomer-based hydrogel provides promising applications in disinfection and therapy of MRSA in hospital and in community.

Novel magnetic calcium phosphate-stem cell construct with magnetic field enhances osteogenic differentiation and bone tissue engineering.

Superparamagnetic iron oxide nanoparticles (IONPs) are promising bioactive additives to fabricate magnetic scaffolds for bone tissue engineering. To date, there has been no report on osteoinductivity of IONP-incorporated calcium phosphate cement (IONP-CPC) scaffold on stem cells using an exterior static magnetic field (SMF). The objectives of this study were to: (1) develop a novel magnetic IONP-CPC construct for bone tissue engineering, and (2) investigate the effects of IONP-incorporation and SMF application on the proliferation, osteogenic differentiation and bone mineral synthesis of human dental pulp stem cells (hDPSCs) seeded on IONP-CPC scaffold for the first time. The novel magnetic IONP-CPC under SMF enhanced the cellular performance of hDPSCs, yielding greater alkaline phosphatase activities (about 3-fold), increased expressions of osteogenic marker genes, and more cell-synthesized bone minerals (about 2.5-fold), compared to CPC control and nonmagnetic IONP-CPC. In addition, IONP-CPC induced more active osteogenesis than CPC control in rat mandible defects. These results were consistent with the enhanced cellular performance by magnetic IONP in media under SMF. Moreover, nano-aggregates were detected inside the cells by transmission electron microscopy (TEM). Therefore, the enhanced cell performance was attributed to the physical forces generated by the magnetic field together with cell internalization of the released magnetic nanoparticles from IONP-CPC constructs.

Synthesis and cellular biocompatibility of two kinds of HAP with different nanocrystal morphology.

Two kinds of hydroxyapatite (HA) with different nanocrystal morphology were obtained via a simple aqueous precipitation method under different reactants molar ratios. Under Ca/P molar ratio of 1.67/1, rod-like crystal was produced, while under Ca/P molar ratio of 1.80/1, spherical crystal was produced. The spherical crystal was 40-60 nm in diameter, while the rod-like crystal was 40-55 nm in diameter and 79-100 nm in length. The influence of HA nanocrystal morphology on osteoblasts growth was assayed by MTT method and SEM. The results indicated that there was a significantly higher absorbency value on the surface of HA with spherical crystal in MTT assay than the latter. In the process of SEM observation, it is found that osteoblasts spread out a large quantity of nano-filopodias on spherical crystal surface, thus exhibiting much more active cell morphology. In conclusion, HA with spherical nanocrystal showed more favorable properties than that with rod-like one for osteoblasts.