Effect of Penetration Enhancer on the Structure of Stratum Corneum: On-Site Study by Confocal Polarized Raman Imaging.

Keratin and lipid structures in the stratum corneum (SC) are closely related to the SC barrier function. The application of penetration enhancers (PEs) disrupts the structure of SC, thereby promoting infiltration. To quantify these PE-induced structural changes in SC, we used confocal Raman imaging (CRI) and polarized Raman imaging (PRI) to explore the integrity and continuity of keratin and lipid structures in SC. The results showed that water is the safest PE and that oleic acid (OA), sodium dodecyl sulfate (SDS), and low molecular weight protamine (LMWP) disrupted the ordered structure of keratin, while azone and liposomes had less of an effect on keratin. Azone, OA, and SDS also led to significant changes in lipid structure, while LMWP and liposomes had less of an effect. Establishing this non-invasive and efficient strategy will provide new insights into transdermal drug delivery and skin health management.

Relationships between oral function, dietary intake and nutritional status in older adults aged 75 years and above: a cross-sectional study.

BACKGROUND: Malnutrition is related to impaired oral health and function that causes poor dietary intake, declining the general health of older adults. The role of dietary intake in the association between oral function and nutritional status of Chinese older adults (aged 75 and above) was examined in this cross-sectional study. METHODS: Through the randomized cluster sampling method, 267 older adults living in rural areas of Qingdao, Shandong (aged 81.4 ± 4.3, 75-94 years) were chosen as the primary research participants. A Mini Nutritional Assessment - Short Form was used to determine nutritional status, and Food Frequency Questionnaire and 24-hour Food Intake Recall were used to assess dietary intake. The oral function was evaluated by analyzing the teeth, oral problems, bite force, tongue pressure, lip sealing pressure, chewing function questionnaire, whole saliva flow rate, 10-Item Eating Assessment Tool, and water swallow test. RESULTS: Based on the MNA-SF score, it was divided into a well-nourished group and a malnutrition group, with the malnutrition group comprising 40.6% of participants. The participants in the malnutrition group showed a higher rate of xerostomia, lower bite force, tongue pressure, and lip sealing pressure, and higher Chewing Function Questionnaire and 10-Item Eating Assessment Tool scores. Furthermore, their plant fat, iron, cereals and potatoes, vegetables, fruits, and seafood intake were relatively low. The regression model indicated that exercise frequency, stroke, chewing and swallowing function, intake of vegetables and fruits were risk factors for nutritional status of older adults. CONCLUSION: Malnutrition was relatively common among the Chinese older adults aged 75 and above, and it was significantly correlated with exercise frequency, stroke, chewing and swallowing function, and intake of vegetables and fruits. Therefore, nutrition management should be carried out under the understanding and guidance of the oral function and dietary intake of the older adults.

Dispersion Polymerization versus Emulsifier-Free Emulsion Polymerization for Nano-Object Fabrication: A Comprehensive Comparison.

Although the preparation of nano-objects by emulsifier-free controlled/living radical emulsion polymerization has drawn much attention, the morphologies of these formed objects are difficult to predict and to reproduce because of the much more complex nucleation mechanisms of emulsion polymerization compared to only one self-assembling nucleation mechanism of controlled radical dispersion polymerization. The present study compares dispersion polymerization with emulsifier-free emulsion polymerization in terms of nucleation mechanism, polymerization kinetics, and disappearance behavior of the macrochain transfer agent, gel permeation chromatograms curves of the obtained block copolymer as well as the structural and morphological differences between the produced nano-objects on the basis of published data. Moreover, the effects of the inherently heterogeneous nature of emulsion polymerization on the mechanism of reversible addition-fragmentation transfer polymerization and the nano-object morphology are examined, and efficient agitation and adequate solubility of the core-forming monomer in water are identified as the most crucial factors for the fabrication of nonspherical nano-objects.

Multidimensional optical sensing platform for detection of heparin and reversible molecular logic gate operation based on the phloxine B/polyethyleneimine system.

A multidimensional optical sensing platform which combines the advantages of resonance Rayleigh scattering (RRS), fluorescence, and colorimetry has been designed for detection of heparin. Phloxine B, a fluorescein derivative showing the special RRS spectrum in the long wavelength region, was selected to develop an easy-to-get system which can achieve switch-on sensing to obtain high sensitivity. The noise level of RRS in the long wavelength region is much weaker, and the reproducibility is much better; in this way, the sensitivity and selectivity can be improved. In the absence of heparin, the phloxine B and polyethyleneimine (PEI) form a complex through electrostatic interaction. Thus, the RRS signal at 554 nm is low; the phloxine B fluorescence is quenched, and the absorption signal is low. In the presence of heparin, competitive binding occurred between phloxine B and heparin toward PEI; then, phloxine B is gradually released from the phloxine B/PEI complex, causing obvious enhancement of the RRS, fluorescence, and absorption signals. Besides, the desorption of phloxine B is less effective for the heparin analogues, such as hyaluronic acid and chondroitin sulfate. In addition, the system presents a low detection limit of heparin to 5.0 × 10(-4) U mL(-1) and can also be applied to the detection of heparin in heparin sodium injection and 50% human serum samples with satisfactory results. Finally, the potential application of this method in reversible on-off molecular logic gate fabrication was discussed using the triple-channel optical signals as outputs.

Fluorine-functionalized conjugated microporous polymer as adsorbents for solid-phase extraction of nine perfluorinated alkyl substances.

Perfluorinated alkyl substances (PFASs) are persistent, toxic, ubiquitously distributed, and bioaccumulated substances, which have attracted increasing concern. To investigate the environmental effects of PFASs, there is a need to develop a sensitive, rapid, and efficient method for detecting trace level PFASs. In this study, a conjugated microporous polymer (CMP) with loading of fluorine, fabricated by Sonogashira-Hagihara cross-coupling, was exploited as a solid-phase extraction (SPE) adsorbent. The prepared fluorine-functionalized CMP (FCMP), which showed a large surface area of 1089 m2·g-1, high porosity, and good chemical stability, was used to extract PFASs from water samples. The adsorption mechanism was investigated using a sorption isotherm model, and the main interactions were fluorous and hydrophobic affinity. The FCMP-based SPE combined with high-performance liquid chromatography-tandem mass spectrometry achieved low limits of detection (0.19-0.97 ng·L-1), wide linear range (2-1600 ng·L-1), and good reproducibility (3.4%-12.9%) under the optimal conditions. Furthermore, the approach was utilized for the analysis of three water samples (snow, river water, and irrigation water) to evaluate its reliability, and satisfactory recovery (70.5%-127.5%) was obtained. Thus, FCMP was feasible SPE adsorbents for the selective extraction of PFASs.

Odontoid calcification and crowned dens syndrome: data from a Chinese center.

OBJECTIVES: To assess the prevalence of calcification surrounding the odontoid process (odontoid calcification) with crowned dens syndrome (CDS) and without CDS (non-CDS) and investigate factors that may related to the onset of CDS. METHODS: Retrospective review of consecutive patients visited Sir Run Run Shaw Hospital between 1 January 2018 and 5 November 2019 who were identified to have odontoid calcification on cervical computed tomography (CT) images. Those who presented with an acute or subacute episode of cervico-occipital pain were defined as CDS, others were non-CDS. RESULTS: We diagnosed 69 cases of odontoid calcification among 2902 cervical CTs of 2556 patients (69/2556, 2.70%), 19 (19/2556, 0.74%) cases of which were CDS, 50 (50/2556, 1.96%) cases were non-CDS. Mean age was 71 (54-86) years old in odontoid calcification patients. The male-to-female ratio of patients with odontoid calcification was 27:42 (0.64). The prevalence of odontoid calcification was 69/1497 (6.14%) in individuals over 50 years old, The prevalence was 0.59% (4/679), 5.05% (26/515), 11.49% (27/235) and 20% (12/60) in patients aged 50-59, 60-69, 70-79 and 80-89 years old, respectively. Age and female gender were predictive factors of odontoid calcification. Lower hemoglobin (Hgb), red blood cell count (RBC), higher C-reactive protein (CRP), pain scale score were found in CDS patients comparing with non-CDS group. No difference of age, gender, hypertension, diabetes mellitus, smoking, alcohol history, creatinine, white blood cell count, mean corpuscular volume, uric acid, calcium was found between the two groups. CONCLUSIONS: Odontoid calcification is a common radiological entity in patients older than 50 years. Lower Hgb, RBC, higher CRP, pain scale score were found in CDS patients comparing with non-CDS.

[Extraction and purification of Atractylodes macrocephala monosaccharide composition].

OBJECTIVE: To study the method of Atractylodes macrocephala monosaccharide composition (AMMC)'s extraction, purification and analysis. METHODS: To extract AMMC with water extraction method and purify it with neutro-alumina and resin adsorption method, to observe removal impurity effect of several methods and determine the technology parameters. To detect monosaccharide's content in AMMC with hydrochloric acid-ultraviolet spectrophotometric determination and Evaporative light scattering detector (ELSD). RESULTS: After purificated with neutro-alumina, the yield and purity of AMMC were 23% - 25.5% and 56% - 60%, respectively. According to the static decoloring curve of D900, D201 and AB-8 resins, their decolorization effect's rank was D900 > AB-8 > D201. The yield of AMMC purificated with D900 ion exchange resin was above 17%, and the purity of monosaccharide was above 76%. CONCLUSION: The effect of AMMC purificated with D900 ion exchange resin after water extration is much better, the ideal method for the quantitative analysis of monosaccharide is hydrochloric acid-ultraviolet spectrophotometric determination.

Overexpression of secreted sucrose isomerase in Yarrowia lipolytica and its application in isomaltulose production after immobilization.

Isomaltulose production by bacterial fermentation was limited, due to generation of undesirable products and reduced yields. Isomaltulose production using sucrose isomerase (SIase) catalyzed methods was expected to be more applicable, but was hampered by low SIase activity and lack of a secreted SIase producer. Here, we aimed to obtain high levels of secreted SIase by overexpressing the SIase gene from Pantoea dispersa UQ68J in Yarrowia lipolytica, a successful host for efficient secretory expression, with a newly characterized strong constitutive promoter. After optimization of the culture medium, the engineered strain JD secreted SIase with an activity of 49.3 U/mL. The recombinant SIase was effectively immobilized onto polyvinyl alcohol-alginate, and the enzymatic activity recovery rate was up to 82.4%. The stability of the SIase was significantly improved by immobilization. Batch production of isomaltulose catalyzed by the immobilized SIase was performed under optimal conditions, generating 620.7 g/L isomaltulose with a yield of 0.96 g/g. The conversion rate of sucrose after 13 batches remained above 90%. These results demonstrated that the proposed SIase expression and immobilization method was promising in the industrial production of isomaltulose.

Turn-on fluorescent sensor for the detection of glucose using manganese dioxide-phenol formaldehyde resin nanocomposite.

Monitoring blood glucose has attracted considerable attention because diabetes mellitus is a global public health problem. Herein, we reported a turn-on fluorescence detection strategy based on manganese dioxide (MnO2)-phenol formaldehyde resin (PFR) nanocomposite for rapid, sensitive, and selective detection of glucose levels in human blood. In this biosensing system, MnO2 nanoshell on the PFR nanoparticle surfaces serve as a quencher. PFR fluorescence can make a recovery in the presence of H2O2, reducing MnO2 to Mn2+. The sensor shows a linear range from 50nM to 90µM with a low detection limit of 20nM for H2O2 detection. Thus, the glucose can be detected on the basis of the enzymatic conversion of glucose by glucose oxidase to produce H2O2. This method exhibits a wide linear range from 5µM to 1mM with a low detection limit of 1.5µM. Because of the excellent photostability offered by PFR, the developed strategy has been successfully applied for the diagnosis of diabetes mellitus in human blood samples. Compared with commercial glucometer, our method showed satisfactory results, indicating the significant reliability. The developed turn-on fluorescent sensor might hold great promise in nanomedicine and bioanalysis.

Fabrication of Functional Nano-objects through RAFT Dispersion Polymerization and Influences of Morphology on Drug Delivery.

To study the influence of self-assembled morphologies on drug delivery, four different nano-objects, spheres, nanorods, nanowires, and vesicles having aldehdye-based polymer as core, were successfully prepared via alcoholic RAFT dispersion polymerization of p-(methacryloxyethoxy)benzaldehyde (MAEBA) using poly((N,N'-dimethylamino)ethyl methacrylate) (PDMAEMA) as a macro chain transfer agent (macro-CTA) for the first time. The morphologies and sizes of the four nano-objects were characterized by TEM and DLS, and the spheres with average diameter (D) of 70 nm, the nanorods with D of 19 nm and length of 140 nm, and the vesicles with D of 137 nm were used in the subsequent cellular internalization, in vitro release, and intracellular release of the drug. The anticancer drug doxorubicin (DOX) was conjugated onto the core polymers of nano-objects through condensation reaction between aldehyde groups of the PMAEBA with primary amine groups in the DOX. Because the aromatic imine is stable under neutral conditions, but is decomposed in a weakly acidic solution, in vitro release of the DOX from the DOX-loaded nano-objects was investigated in the different acidic solutions. All of the block copolymer nano-objects show very low cytotoxicity to HeLa cells up to the concentration of 1.2 mg/mL, but the DOX-loaded nano-objects reveal different cell viability and their IC50s increase as the following order: nanorods-DOX < vesicles-DOX < spheres-DOX. The IC50 of nanowires-DOX is the biggest among the four nano-objects owing to their too large size to be internalized. Endocytosis tests demonstrate that the internalization of vesicles-DOX by the HeLa cells is faster than that of the nanorods-DOX, and the spheres-DOX are the slowest to internalize among the studied nano-objects. Relatively more nanorods localized in the acidic organelles of the HeLa cells lead to faster intracellular release of the DOX, so the IC50 of nanorods is lower than that of the vesicles-DOX.

[The relationship between angle of puncture and distribution of bone cement of unilateral percutaneous kyphoplasty for the treatment of thoracolumbar compression fractures].

OBJECTIVE: To explore the relationship of bone cement distribution and the puncture angle in the treatment of thoracolumbar compression fractures with unilateral percutaneous kyphoplasty (PKP). METHODS: The clinical data of 37 patients with thoracolumbar osteoporotic compression fractures underwent PKP between January 2013 to March 2014 were retrospectively analyzed, all punctures were performed unilaterally. There were 6 males, aged from 65 to 78 years old with an average of (71.83 ± 6.15) years; and 31 females, aged from 57 to 89 years old with an average of (71.06 ± 7.89) years. Imaging data were analyzed and puncture angle and puncture point were measured before operation. According to the measured data, the puncture were performeds during the operation. Distribution area of bone cement were calculated by X-rays data after operation. The effect of bone cement distribution on suitable puncture angle was analyzed; VAS score was used to evaluate the clinical effects. RESULTS: The puncture angle of thoracic vertebrae in T8-T12 was from 28° to 33° with an average 30.4°; and the puncture angle of lumbar vertebrae in L1-L5 was from 28° to 35° with an average of 31.3°. Postoperative X-rays showed the area ratios of bilateral bone cement was 0.97 ± 0.15. Bilateral diffuse area were basic equal. Postoperative VAS score decreased significantly (1.89 ± 1.29 vs 7.03 ± 1.42). CONCLUSION: Through measure imaging data before operation with PKP,the puncture point and entry point can be confirmed. According the measured data to puncture during operation, unilateral puncture can reach the distribution effect of the bilateral puncture in the treatment of thoracolumbar compression fractures.

Fluorescent detection of hydrogen peroxide and glucose with polyethyleneimine-templated Cu nanoclusters.

An interesting, simple, and label-free strategy for the detection of hydrogen peroxide and glucose has been developed with polyethyleneimine (PEI)-capped copper nanoclusters as a fluorescence probe in aqueous solution. The PEI-templated Cu nanoclusters which we have synthesized have an average diameter of 1.8 nm and show a blue emission at 480 nm. In the presence of hydrogen peroxide, the fluorescence of the Cu nanoclusters is quenched. Similarly, glucose oxidase catalyzes the oxidation of glucose to gluconic acid and H2O2, so we can also use this probe to detect glucose. Because of the high zymolyte specificity of glucose oxidase, the detection of glucose has good selectivity. Under the optimized experimental conditions, the linear ranges for H2O2 and glucose are 0.5-10 µM and 10-100 µM, respectively. And the detection limits for H2O2 and glucose are 0.4 and 8 µM, respectively. Furthermore, we discussed the mechanism of fluorescence quenching which is caused by the interaction between H2O2 and Cu nanoclusters. This sensing system has been applied successfully to the detection of glucose in human serum samples.