Simultaneous sludge minimization and membrane fouling mitigation in membrane bioreactors by using a microaerobic - Settling pretreatment module.

Membrane fouling is the major obstacle for membrane bioreactors operated at a long sludge retention time to reduce sludge production. In this study, a sludge process reduction (SPR) module, consisting of a microaerobic tank and a settler, was inserted before an anoxic/oxic MBR (AO-MBR) to achieve dual objectives of fouling alleviation and sludge reduction. Three SPR-MBRs were operated to investigate influences of sludge recirculation ratios from the SPR settler to the microaerobic tank on process performance. Compared to AO-MBR, the SPR-MBRs reduced sludge production by 43.1-56.4% by maintaining sludge retention times above 175 d, and decreased foulant layer resistance and pore clogging resistance. Inserting SPR reduced the accumulation of dissolved organic matters and extracellular polymeric substances, enlarged sludge flocs, and decreased sludge viscoelasticity. However, increasing RSPR stimulated outward diffusion of extracellular polymeric substances and increased sludge viscosity. SPR-MBRs achieved effective sludge reduction by enriching hydrolytic (Trichococcus and Aeromonas) and fermentative genera (Lactococcus, Paludibacter, Macellibacteroides, and Acinetobacter) in the SPR, and alleviated membrane fouling by prohibiting the growth of extracellular polymeric substance-secreting bacteria and enriching filamentous bacteria to enlarge particle size. The results revealed that the SPR-MBR maximized sludge reduction with a very long sludge retention time, and alleviated membrane fouling synchronously.

Identification of potentially functional circRNAs and prediction of circRNA-miRNA-mRNA regulatory network in periodontitis: Bridging the gap between bioinformatics and clinical needs.

BACKGROUND AND OBJECTIVE: Periodontitis is a multifactorial chronic inflammatory disease that can lead to the irreversible destruction of dental support tissues. As an epigenetic factor, the expression of circRNA is tissue-dependent and disease-dependent. This study aimed to identify novel periodontitis-associated circRNAs and predict relevant circRNA-periodontitis regulatory network by using recently developed bioinformatic tools and integrating sequencing profiling with clinical information for getting a better and more thorough image of periodontitis pathogenesis, from gene to clinic. MATERIAL AND METHODS: High-throughput sequencing and RT-qPCR were conducted to identify differentially expressed circRNAs in gingival tissues from periodontitis patients. The relationship between upregulated circRNAs expression and probing depth (PD) was performed using Spearman's correlation analysis. Bioinformatic analyses including GO analysis, circRNA-disease association prediction, and circRNA-miRNA-mRNA network prediction were performed to clarify potential regulatory functions of identified circRNAs in periodontitis. A receiver-operating characteristic (ROC) curve was established to assess the diagnostic significance of identified circRNAs. RESULTS: High-throughput sequencing identified 70 differentially expressed circRNAs (68 upregulated and 2 downregulated circRNAs) in human periodontitis (fold change >2.0 and p < .05). The top five upregulated circRNAs were validated by RT-qPCR that had strong associations with multiple human diseases, including periodontitis. The upregulation of circRNAs were positively correlated with PD (R = .40-.69, p < .05, moderate). A circRNA-miRNA-mRNA network with the top five upregulated circRNAs, differentially expressed mRNAs, and overlapped predicted miRNAs indicated potential roles of circRNAs in immune response, cell apoptosis, migration, adhesion, and reaction to oxidative stress. The ROC curve showed that circRNAs had potential value in periodontitis diagnosis (AUC = 0.7321-0.8667, p < .05). CONCLUSION: CircRNA-disease associations were predicted by online bioinformatic tools. Positive correlation between upregulated circRNAs, circPTP4A2, chr22:23101560-23135351+, circARHGEF28, circBARD1 and circRASA2, and PD suggested function of circRNAs in periodontitis. Network prediction further focused on downstream targets regulated by circRNAs during periodontitis pathogenesis.

Conditioning of raw sludge and thermally hydrolyzed sludge by ferric salt and cationic polyacrylamide: rheological analysis.

In this study, the conditioning effect of cationic polyacrylamide (CPAM) with different charge densities on raw sludge (RS) and thermo-hydrolyzed sludge (HS) pretreated with or without ferric salt is studied through orthogonal experiments. In addition, this paper uses the principles of rheology and morphology to analyze and clarify the conditioning mechanism of RS and HS, and reveals the mechanism of thermal hydrolysis to improve the dewatering performance of sludge. Compared with the RS, the HS has smaller particle size, better filterability, stronger fluidity and more obvious thixotropy. However, due to the influence of filter pressing time, ferric salt should be added before conditioning. The orthogonal experiment shows that the optimal conditioner is CPAM with charge density of 60, and the specific resistance to filtration and capillary suction time of the adjusted thermo-hydrolyzed sludge are reduced to (1.11 ± 0.07) × 1012 m/kg and 16.1 ± 1.8 s; the particle size increased from 61.2 to 253.5 µm. The moisture content of the sludge cake is about 48%. The structural strength and thixotropy of HS are higher than those of the RS, and can be greatly improved by adding ferric salt. Morphological analysis confirms that thermal hydrolysis can lyse microbial cells in sludge, and the sludge treated with ferric salt will have more porous structure and stronger flocculation strength.

Association of IL-28B, TBX21 gene polymorphisms and predictors of virological response for chronic hepatitis C.

Hepatitis C virus (HCV) infection is a major cause of chronic liver disease. The outcomes of both spontaneous HCV clearance and response to therapy depend on both viral and host factors. To investigate the influence of polymorphisms of IL-28B rs12979860 and TBX21 rs17250932, rs4794067 as well as viral factors (HCV genotype, F protein) on the outcome of HCV infection, we genotyped 565 patients with chronic HCV infection, 191 patients spontaneously resolved from HCV infection, 359 healthy controls and 383 treatment-naïve CHC patients with pegylated interferon-α and ribavirin (PEG IFN-α/RBV). Results showed that TBX21 rs4794067 variant genotypes significantly correlated with increased risk of HCV chronic infection (dominant model: OR = 5.690, 95% CI = 2.024-16.000) and susceptibility (dominant model: OR = 5.658, 95% CI = 2.514-12.735). We also found that the rs12979860, rs2227982 and rs36084323 polymorphisms showed no significant associations with susceptibility or spontaneous clearance of HCV in the anti-F antibody subgroup; however, the anti-F antibody positive subgroup might show an increased risk of N-SVR (all P < 0.001). Our results demonstrate that variant factors in both the host and pathogen are commonly important for HCV clearance. In addition rs4794067 and F protein status may be strong predictive markers in the Chinese population.

Treatment of chemical cleaning wastewater and cost optimization by response surface methodology coupled nonlinear programming.

The real alkaline cleaning wastewater (ACW) was treated by a process consisting of neutralization, NaClO oxidation and aluminum sulfate (AS) coagulation, and a novel response surface methodology coupled nonlinear programming (RSM-NLP) approach was developed and used to optimize the oxidation-coagulation process under constraints of relevant discharge standards. Sulfuric acid neutralization effectively removed chemical oxygen demand (COD), surfactant alkylphenol ethoxylates (OP-10) and silicate at the optimum pH of 7.0, with efficiencies of 62.3%, >82.7% and 94.2%, respectively. Coagulation and adsorption by colloidal hydrated silica formed during neutralization were the major removal mechanisms. NaClO oxidation achieved almost complete removal of COD, but was ineffective for the removal of surfactant OP-10. AS coagulation followed by oxidation can efficiently remove OP-10 with the formation of Si-O-Al compounds. The optimum conditions for COD ≤100 mg/L were obtained at hypochlorite to COD molar ratio of 2.25, pH of 10.0 and AS dosage of 0.65 g Al/L, with minimum cost of 9.58 $/m3 ACW. This study shows that the integrative RSM-NLP approach could effectively optimize the oxidation-coagulation process, and is attractive for techno-economic optimization of systems with multiple factors and threshold requirements for response variables.

Transcriptome changes during TNF-α promoted osteogenic differentiation of dental pulp stem cells (DPSCs).

Dental pulp stem cells (DPSCs), due to the ease of isolation and their capacities of multi-lineage differentiation, are considered as attractive resources for regenerative medicine. In a previous study, we showed that TNF-α promoted the osteogenic differentiation of DPSCs via the NF-κB signaling pathway. However, the mechanisms of such differentiation were largely unknown. Here, we examined the gene expression profiles between undifferentiated, partially differentiated and fully differentiated DPSCs induced by TNF-α by performing the next-generation sequencing technique (RNA-Seq). Our results revealed a continuous transition of the transcriptome changes during TNF-α promoted osteogenic differentiation of DPSC. Bioinformatics analysis revealed a relatively general to specific transformation of the involved signaling pathways from the early to late stages of differentiation. Gene regulatory network analysis highlighted novel, key genes that are essential for osteogenic differentiation at different time points. These results were further validated by quantitative RT-PCR, confirming the high reliability of the RNA-Seq. Our data therefore will not only provide novel insights into the molecular mechanisms that drive the osteogenic differentiation of DPSCs, but also promote the studies of bone tissue engineering that utilizes DPSCs as a crucial resource.

The quality of life after keratinized mucosa augmentation around dental implants using xenogenic collagen matrix with or without stent.

BACKGROUND: The substitution of missing teeth with implants is a dependable and anticipated therapeutic approach. Despite numerous studies affirming long-term success rates, there exists a spectrum of potential biological and aesthetic complications. OBJECTIVE: The primary objective of this study was to assess patient responses subsequent to surgical interventions, with a specific emphasis on the utilization of xenogenic collagen matrix (XCM), both with and without the application of a stent secured over healing abutments, in the context of keratinized gingival mucosa augmentation. The principal aim was to evaluate and draw comparisons between the clinical outcomes resulting from these two procedural approaches, with a particular focus on critical parameters encompassing post-operative complications, patient comfort, and the overall efficacy in achieving successful keratinized tissue augmentation. methods: Sixty patients were selected for this study. The patients were divided into three groups: A, B, and a control group, with each group comprising 20 participants. We used XCM in experimental group A, XCM covered with surgical stent in experimental group B, and free gingival graft (FGG) in the control group. After the surgical procedure, patients were required to complete a visual analogue scale (VAS) questionnaire for post-operative complications, and a quality of life (QOL) questionnaire on days 1, 3, and 7. RESULTS: Patients in the experimental groups A and B demonstrated markedly improved outcomes when compared with the control group. Assessments conducted on days 1, 3, and 7 demonstrated diminished levels of pain, bleeding, and swelling in both experimental groups, with experimental group B showing the least discomfort. The incorporation of XCM, either with or without stents, was associated with a reduction in analgesic consumption, underscoring its favorable influence on post-operative comfort, notwithstanding the exception of halitosis in experimental group B. CONCLUSION: Using XCM with or without a stent for keratinized tissue augmentation has better post-operative outcomes associated with reduced swelling, bleeding, and pain based on the QOL survey. This study provides data to support the clinical application of XCM and stents.

Insights into effects of operating temperature on the removal of pharmaceuticals/pesticides/synthetic organic compounds by membrane bioreactor process.

In this study, the removal efficiency and mechanism of 8 kinds of typical micropollutants by membrane bioreactor (MBR) at different temperatures (i.e. 15, 25 and 35 °C) were investigated. MBR exhibited the high removal rate (>85%) for 3 kinds of industrial synthetic organic micropollutants (i.e. bisphenol A (BPA), 4-tert-octylphenol (TB) and 4-n-nonylphenol (NP)) with similar functional groups, structures and high hydrophobicity (Log D > 3.2). However, the removal rates of ibuprofen (IBU), carbamazepine (CBZ) and sulfamethoxazole (SMX) with pharmaceutical activity showed great discrepancy (i.e. 93%, 14.2% and 29%, respectively), while that of pesticides (i.e. acetochlor (Ac) and 2,4-dichlorophenoxy acetic acid (2,4-D) were both lower than 10%. The results showed that the operating temperature played a significant role in microbial growth and activities. High temperature (35 °C) led to a decreased removal efficiency for most of hydrophobic organic micropollutants, and was also not conducive for refractory CBZ due to the temperature sensitivity. At lower temperature (15 °C), a large amount of exopolysaccharides and proteins were released by microorganisms, which caused the inhibited microbial activity, poor flocculation and sedimentation, resulting in the polysaccharide-type membrane fouling. It was proved that dominant microbial degradation of 61.01%-92.73% and auxiliary adsorption of 5.29%-28.30% were the main mechanisms for micropollutant removal in MBR system except for pesticides due to the toxicity. Therefore, the removal rates of most micropollutants were highest at 25 °C due to the high activity sludge so as to enhance microbial adsorption and degradation.

[A new biosynthesis route for production of 5-aminovalanoic acid, a biobased plastic monomer].

5-aminovalanoic acid (5AVA) can be used as the precursor of new plastics nylon 5 and nylon 56, and is a promising platform compound for the synthesis of polyimides. At present, the biosynthesis of 5-aminovalanoic acid generally is of low yield, complex synthesis process and high cost, which hampers large-scale industrial production. In order to achieve efficient biosynthesis of 5AVA, we developed a new pathway mediated by 2-keto-6-aminohexanoate. By combinatory expression of L-lysine α-oxidase from Scomber japonicus, α-ketoacid decarcarboxylase from Lactococcus lactis and aldehyde dehydrogenase from Escherichia coli, the synthesis of 5AVA from L-lysine in Escherichia coli was achieved. Under the initial conditions of glucose concentration of 55 g/L and lysine hydrochloride of 40 g/L, the final consumption of 158 g/L glucose and 144 g/L lysine hydrochloride, feeding batch fermentation to produce 57.52 g/L of 5AVA, and the molar yield is 0.62 mol/mol. The new 5AVA biosynthetic pathway does not require ethanol and H2O2, and achieved a higher production efficiency as compared to the previously reported Bio-Chem hybrid pathway mediated by 2-keto-6-aminohexanoate.

Microplastics exacerbate co-occurrence and horizontal transfer of antibiotic resistance genes.

Microplastic pollution is a rising environmental issue worldwide. Microplastics can provide a niche for the microbiome, especially for antibiotic-resistant bacteria, which could increase the transmission of antibiotic resistance genes (ARGs). However, the interactions between microplastics and ARGs are still indistinct in environmental settings. Microplastics were found to be significantly correlated with ARGs (p < 0.001), based on the analysis of samples taken from a chicken farm and its surrounding farmlands. Analysis of chicken feces revealed the highest abundance of microplastics (14.9 items/g) and ARGs (6.24 ×108 copies/g), suggesting that chicken farms could be the hotspot for the co-spread of microplastics and ARGs. Conjugative transfer experiments were performed to investigate the effects of microplastic exposure for different concentrations and sizes on the horizontal gene transfer (HGT) of ARGs between bacteria. Results showed that the microplastics significantly enhanced the bacterial conjugative transfer frequency by 1.4-1.7 folds indicating that microplastics could aggravate ARG dissemination in the environment. Potential mechanisms related to the up-regulation of rpoS, ompA, ompC, ompF, trbBp, traF, trfAp, traJ, and down-regulation of korA, korB, and trbA were induced by microplastics. These findings highlighted the co-occurrence of microplastics and ARGs in the agricultural environment and the exacerbation of ARGs' prevalence via rising the HGT derived from microplastics.

Preparation and characterization of antibacterial and anti-inflammatory hyaluronic acid-chitosan-dexamethasone hydrogels for peri-implantitis repair.

Numerous treatment methods for peri-implantitis have been widely used including oral cleaning, traditional metal scraping means, or local antibiotic application. However, to continuously release antibacterial and anti-inflammatory drug in location in situ for effective peri-implantitis repair is still challenging. Herein, an anti-inflammatory drug dexamethasone (DE)-incorporated hyaluronic acid (HA)-chitosan (CT) composite hydrogels system was developed to repair peri-implantitis. The physicochemical characterization and biocompatibility of the hydrogel were evaluated in vitro. The in vivo hydrogels degradation and peri-implantitis repair were assessed in mice. The results showed that the prepared multifunctional hydrogels achieved sustained release, with an equilibrium swelling of 18, and promoted the growth against NIH-3T3 fibroblast cells. The in vitro antibacterial tests showed HA-CT-DE hydrogels can inhibit methicillin-resistant Staphylococcus aureus and Escherichia coli. It down-regulated the expression levels of inflammation factor IL-1ß, IL-6 and, TNF-α in peri-implantitis. The prepared HA-CT-DE composite hydrogels with integrated function is promising for the treatment of peri-implantitis.

Effects of microplastics accumulation on performance of membrane bioreactor for wastewater treatment.

The effective interception of membrane leads to the accumulation of microplastics (MPs) in membrane bioreactor (MBR) process for long-term operation. However, the influence of MPs accumulation on the performance of MBR hasn't been well understood. In this study, the accumulation of polypropylene microplastics (PP-MPs) in two MBRs run for 3 yr with or without discharging sludge was simulated by operating the lab-scale MBRs for 84 days. The variations of pollutant removal, membrane fouling, composition of soluble microbial product (SMP) and extracellular polymeric substance (EPS), and microbial community of MBRs were systematically investigated. The results show that the removal efficiency of COD and NH4+-N was not depressed by PP-MPs accumulation. However, the presence of PP-MPs in the range of 0.14-0.30 g/L could inhibit the growth of microorganisms, enhance the secretion of SMP and EPS, and reduce the microbial richness and diversity. In the contrary, the high concentration of PP-MPs (2.34-5.00 g/L) exhibited the opposite effects and mitigated membrane fouling, suggesting the important role of MPs concentration. It was also found that the exposure to high concentration of PP-MPs enhanced relative abundance of Clostridia, and inhibited the growth of Proteobacteria. The findings of this study provide a foresight to understand the effects of MPs accumulation on the performance of MBRs.

Association of Apatinib and Breast Cancer: A systematic review and meta-analysis.

BACKGROUND: Breast cancer (BC) is a common malignant tumor. Apatinib in combination with other treatments has been used for BC; however, its safety and efficacy are not well-known. Therefore, this meta-analysis was performed to assess the efficacy and safety of apatinib in the treatment of BC. METHODS: Studies comparing the effects of apatinib-based therapy versus control among BC patients were included. On January 21, 2022, a systematic search was performed in 9 databases. The risk ratio (RR) with 95% confidence interval (CI) was used to estimate efficacy and safety. The I square value (I2) was used to assess heterogeneity. A leave-one-out sensitivity analysis was also conducted. Publication bias was assessed by funnel plots and Egger's and Begg's tests. RESULTS: A total of 31 studies including 2,258 BC patients were included. The results showed that apatinib group had a significant improvement in disease control rate (DCR, RR = 1.43, 95% CI = 1.35-1.52, I2 = 43.8%) and objective response rate (ORR, RR = 1.79, 95% CI = 1.51-2.13, I2 = 61.8%) compared to the control group. Except for hemorrhage, hypertension, and hand-foot syndrome, the adverse events were similar between apatinib group and control group. Subgroup analyses found statistically significant differences in DCR in all subgroups except for apatinib combined with radiation therapy and with paclitaxel liposome plus S1. For ORR, there were statistically significant differences in all subgroups except for the radiation therapy, and apatinib monotherapy subgroups. CONCLUSIONS: Our study shown apatinib showed good efficacy and acceptable safety in the treatment of BC patients. More high-quality randomized controlled trials from different regions and countries are needed to confirm our findings.

Adsorption of humic acid onto carbonaceous surfaces: atomic force microscopy study.

The adsorption of humic acid (HA) onto highly ordered pyrolytic graphite (HOPG) surfaces at different concentrations has been studied by atomic force microscopy. When HA concentration was increased from 10 to 1,000 mg/L, HA can sequentially form spherical particles, layered structures, and connected blocks on HOPG surfaces. The findings of the layer structures and small amount of fine chains have been verified and discussed. When HA was acidified by addition of acetic acid, it changed into small rigid particles. These results indicated that HA can be considered as supramolecular associations of self-assembling heterogeneous and relatively small molecules, and a small amount of polymers. The present results are important for understanding HA molecular structures and their adsorption characteristic on carbonaceous surfaces.

Elucidating the intensifying effect of introducing influent to an anaerobic side-stream reactor on sludge reduction of the coupled membrane bioreactors.

Three anoxic/oxic membrane bioreactors (AO-MBRs) coupled with the anaerobic side-stream reactor (ASSR) with different influent flow distribution ratios (IFDRs) were assessed to elucidate how IFDR in the ASSR affected pollutants removal, sludge reduction, membrane fouling, and potential co-occurrence network of microorganisms. When the IFDR in the ASSR was increased from 0% (ASSR0-MBR), to 25% (ASSR25-MBR) and 75% (ASSR75-MBR), chemical oxygen demand removal was enhanced and nutrient removal was comparable. Compared to ASSR0-MBR, ASSR25- and ASSR75-MBR further improved the sludge reduction by 7.6% and 10.9%, respectively. ASSR25-MBR followed cake-complete model due to the weak membrane surface scouring and high concentration of extracellular polymeric substances, while ASSR0- and ASSR75-MBR fitted cake-standard model. The increased IFDR in the ASSR boosted the relative abundance of hydrolytic and slow-growing bacteria. The co-occurrence networks of sludge reduction, nutrient removal and membrane fouling propensity indicated that the symbiotic relationships were dominant.

Development of a new atmospheric pressure plasmaspray ionization for ambient mass spectrometry.

A new atmospheric pressure ionization method, plasmaspray ionization, termed as PSI, was developed to be an alternative ambient ion source for mass spectrometry. It comprises a plasma jet device and a sample spray part. While the nonthermal plasma jet strikes the surface of stainless steel tube out of the spray capillary, the sprayed sample will be ionized with the assistant of auxiliary gas. Although PSI is a little bit more complex than electrospray ionization (ESI) in instrument, it shows both better linearity and higher sensitivity for organic compounds. For protein samples, it presents wider distributions of multiply charged ions and higher mass resolution without sacrificing any sensitivity. For the mechanism of PSI, the charge build-up process on the tip of capillary should play a key role for the ion formation, and the stimulated pulsed voltage on the flow tube will promote the ion aggregation speed until the charge density is high enough. PSI source contains the features of plasma ionization and ESI and can be considered as a novel combo bridging these techniques. These results reflect that this method of PSI can be applied and further developed as a versatile new ion source for a wild range of organic and biological samples.

Compact wastewater treatment process based on abiotic nitrogen management achieved high-rate and facile pollutants removal.

Chemically enhanced primary treatment (CEPT), ammonium ion exchange and regeneration (AIR) and membrane bioreactor (MBR) were coupled as CAIRM to treat domestic wastewater compactly and efficiently. CAIRM achieved efficient removal of chemical oxygen demand, ammonia nitrogen, total nitrogen (TN) and total phosphorus with total hydraulic retention time of 4.6 h, and obtained 2.3 ± 0.9 mg/L TN in the effluent. CEPT removed phosphate and impurities and prevented AIR from pollution. AIR maintained excellent nitrogen removal with a slight decrease in the exchange capacity of ion exchangers. MBR polished the effluent from AIR, and the larger particle size and better dewaterability of sludge mitigated the membrane fouling. Many heterotrophic genera, such as Rhodobacter and Defluviimonas, were enriched in the oligotrophic MBR. This study demonstrates the viability and stability of CAIRM in efficient wastewater treatment, which will address critical challenges in insufficient nitrogen removal and high land occupancy of current processes.

Pd-promoting reduction of zinc salt to PdZn alloy catalyst for the hydrogenation of nitrothioanisole.

Catalytic hydrogenation of sulfur-containing substrates is an important and challenging reaction in the chemical industry. In this work, active carbon supported PdZn alloy catalyst was prepared by self-reduction method using zinc acetate as precursor without H2 atmosphere. During the process of self-reduction, Zn2+ was firstly reduced to Zn0 at 300 °C by active carbon and reducing gas from the decompose of acetate under the promotion of metal Pd, and Zn0 further reacted with metal Pd to form PdZn alloy phase at 500 °C. These PdZn/AC-X catalysts showed the higher conversion and stability for the hydrogenation of 4-nitrothioanisole than the Pd/AC-600 catalyst. The excellent catalytic performance of PdZn/AC-600 catalyst can be attributed to formation of PdZn alloy, in which electron-rich Pd atoms weaken the binding ability between Pd and S and enhance the sulfur-resistance of catalyst. On the other hand, H2-TPR and DFT theory calculation further indicated that the PdZn alloy phase weakens the adsorption capacity of S. Compared with the Pd/AC-600 catalyst, the PdZn alloy phase in PdZn/AC-600 catalyst has not changed and only a small amount of sulfur-containing substrates deposited on the catalyst surface after three cycles. PdZn/AC-600 catalyst exhibited improved stability in the hydrogenation of 4-nitrothioanisole and can be used three cycles with little decrease in activity.

Fouling characterization and aeration performance recovery of fine-pore diffusers operated for 10 years in a full-scale wastewater treatment plant.

Fouling characterization and aeration performance recovery of fine-pore diffusers operated for 10 years in a full-scale wastewater treatment plant were investigated to elucidate fouling mechanisms and develop cleaning strategy. The performance decline of diffusers was observed with dynamic wet pressure increased by 3.2 times and standard oxygen transfer efficiency dropped to 73%, which contributed to 15.0% increase in total energy consumption. Oxygen-affinity, filamentous and extracellular polymeric substances secreting bacteria tended to accumulate on the diffuser surface. External (mainly biofilm growth), internal (organic and inorganic matters) and irrecoverable (mainly material aging) foulants accounted for 34.1%, 45.4% and 20.1% of total fouling, respectively. HCl cleaning failed to restore aeration efficiency because it eliminated structural support formed by inorganics, leaving organic foulants broken into smaller fragments and distributed more dispersed. NaClO showed better cleaning efficiency by effectively removing organic foulants. Sequential cleaning by NaClO and HCl, which achieved the best recovery, was recommended.

Evaluating influence of filling fraction of carriers packed in anaerobic side-stream reactors on membrane fouling and microbial community of the coupled membrane bioreactors.

An anoxic/oxic membrane bioreactors (AO-MBR) and three identical anaerobic side-stream reactor coupled with anoxic/oxic membrane bioreactors (ASSR-MBR) were constructed and operated in parallel to investigate the appropriate filling fraction of carriers packed in ASSR, influences on pollutants removal, sludge reduction, membrane fouling and microbial community of ASSR-MBR. Inserting ASSR achieved efficient COD removal and nitrification, and packing carriers in ASSR obtained the highest sludge reduction efficiency of 50.5 % at filling fraction of 25 %. Compared to AO-MBR, inserting ASSR without carriers induced the release of viscous components in extracellular polymeric substances (EPS) and the formation of calcium carbonate-related bacteria on membrane surface, and thus deteriorated membrane fouling. Packing carriers with 25 % filling fraction promoted the hydrolysis of soluble microbial products and EPS, whilst reduced the viscoelasticity of sludge flocs. Higher filling fraction of 50 % increased the shear forces to the biofilm and biomarkers related to membrane fouling, and thus showed little improvement to alleviate membrane fouling. MiSeq sequencing revealed that although it enriched in the bulk sludge of conventional ASSR-MBR and the coupled reactor with filling fraction of 50 %, the floc-forming, hydrolytic and fermentative bacteria were more inclined to attach on the membrane surface and alleviate fouling process.