Effect of Different Glucose Concentrations on Small RNA Levels and Adherence of Streptococcus mutans.

Streptococcus mutans (S. mutans) adheres to the tooth surface, metabolizes carbohydrates, and produces acid products, leading to enamel demineralization-the onset of dental caries. Rapid acidification by S. mutans has been observed in the presence of glucose. However, little is known about the role of small RNAs (sRNAs) in S. mutans in the presence of glucose and their relationship to tooth adherence. The objective of this study was to evaluate the role of sRNAs in S. mutans (18-50 nucleotides) regarding adherence capacity under 1% and 5% glucose concentrations. The pH drop and adherence capacity in the 1% glucose condition were similar to these parameters under conditions of 5% sucrose that were published in our previous study. A total of 2149 candidate sRNA with at least 100 average reads in the 5% and 1% glucose libraries were obtained. Between the two libraries, 581 sRNAs were differentially expressed and 43 sRNAs were verified. However, the expression levels of the predicted target genes gtfC and spaP were similar between the 1% and 5% glucose conditions. The bioinformatic analysis suggested that differentially expressed sRNAs may be involved in several pathways. These findings indicate that sRNAs were induced under these glucose concentrations and a series of sRNAs were specifically induced, respectively. sRNAs that are induced under glucose stress may be involved in regulating adherence of S. mutans.

Role of Negative-Pressure Wound Therapy in the Management of Submandibular Fistula After Reconstruction for Osteoradionecrosis.

PURPOSE: Although negative-pressure wound therapy (NPWT) for complicated wounds has been extensively studied, it is rarely used in cases involving a submandibular fistula due to radiation-induced osteoradionecrosis of the mandible. This study aimed to investigate the efficacy of NPWT for submandibular fistulas after reconstruction for osteoradionecrosis. PATIENTS AND METHODS: Nine patients with submandibular fistulas after reconstruction for osteoradionecrosis treated with NPWT between 2011 and 2014 were included in the study. The wound healing was documented. RESULTS: The NPWT device was removed postoperatively between days 7 and 12 (mean duration, 9.6 days). The wound bed was filled with healthy granulation tissue, and successful healing by second intention was observed in all patients within 2 weeks. No complications were observed. The follow-up ranged from 4 to 27 months (mean, 18 months); the fistulas exhibited excellent healing, and no recurrence or infection was observed. CONCLUSIONS: NPWT is a safe, effective technique for managing submandibular fistulas after reconstruction for osteoradionecrosis.

Analysis of Small RNAs in Streptococcus mutans under Acid Stress-A New Insight for Caries Research.

Streptococcus mutans (S. mutans) is the major clinical pathogen responsible for dental caries. Its acid tolerance has been identified as a significant virulence factor for its survival and cariogenicity in acidic conditions. Small RNAs (sRNAs) are recognized as key regulators of virulence and stress adaptation. Here, we constructed three libraries of sRNAs with small size exposed to acidic conditions for the first time, followed by verification using qRT-PCR. The levels of two sRNAs and target genes predicted to be bioinformatically related to acid tolerance were further evaluated under different acid stress conditions (pH 7.5, 6.5, 5.5, and 4.5) at three time points (0.5, 1, and 2 h). Meanwhile, bacterial growth characteristics and vitality were assessed. We obtained 1879 sRNAs with read counts of at least 100. One hundred and ten sRNAs were perfectly mapped to reported msRNAs in S. mutans. Ten out of 18 sRNAs were validated by qRT-PCR. The survival of bacteria declined as the acid was increased from pH 7.5 to 4.5 at each time point. The bacteria can proliferate under each pH except pH 4.5 with time. The levels of sRNAs gradually decreased from pH 7.5 to 5.5, and slightly increased in pH 4.5; however, the expression levels of target mRNAs were up-regulated in acidic conditions than in pH 7.5. These results indicate that some sRNAs are specially induced at acid stress conditions, involving acid adaptation, and provide a new insight into exploring the complex acid tolerance for S. mutans.

Effect of oxidation heat treatment on the bond strength between a ceramic and cast and milled cobalt-chromium alloys.

There is a dearth of dental scientific literature on the effect of different oxidation heat treatments (OHTs) (as surface pretreatments) on the bonding performance of cast and milled cobalt-chromium (CoCr) alloys. The objective of this study was to evaluate the effect of different OHTs on the bond strength between a ceramic and cast and milled CoCr alloys. Cobalt-chromium metallic specimens were prepared using either a cast or a milled method. Specimens were subjected to four different OHT methods: without OHT; OHT under normal atmospheric pressure; OHT under vacuum; and OHT under vacuum followed by sandblasting. The metal-ceramic bond strength was evaluated using a three-point bending test according to ISO9693. Scanning electron microscopy and energy-dispersive spectroscopy were used to study the specimens' microstructure and elemental composition. The bond strength was not affected by the CoCr manufacturing method. Oxidation heat treatment performed under normal atmospheric pressure resulted in the highest bond strength. The concentration of oxygen on the alloy surfaces varied with the different pretreatment methods in the following order: OHT under normal atmospheric pressure > OHT under vacuum > without OHT ≈ OHT under vacuum followed by sandblasting.

Effect of heating palladium-silver alloys on ceramic bond strength.

STATEMENT OF PROBLEM: The effects of different heat treatments on the internal oxidation and metal-ceramic bond in Pd-Ag alloys with different trace elements require further documentation. PURPOSE: The purpose of this in vitro study was to determine whether heat treatment affects the metal-ceramic bond strength of 2 Pd-Ag alloys containing different trace elements. MATERIAL AND METHODS: Thirteen cast specimens (25×3×0.5 mm) from each of 2 Pd-Ag alloy groups (W-1 and Argelite 61+3) were allocated to heat treatments before porcelain application: heating under reduced atmospheric pressure of 0.0014 MPa and 0.0026 MPa and heating under normal atmospheric pressure. Bond strengths were evaluated using a 3-point bending test according to ISO9693. Results were analyzed using 2-way ANOVA and Tukey HSD test (α=.05). Visual observation was used to determine the failure types of the fractured specimens. Scanning electron microscopy and energy dispersive spectroscopy were used to study morphologies, elemental compositions, and distributions in the specimens. RESULTS: The W-1 group had a mean bond strength significantly higher than that of Argelite 61+3 (P<.001). Heating under reduced atmospheric pressures of 0.0014 MPa and 0.0026 MPa resulted in similar bond strengths (P=.331), and both pressures had significantly higher bond strengths than that of heating under normal atmospheric pressure (P=.002, P<.001). Heating under different air pressures resulted in Pd-Ag alloys that contained either Sn or In and Ga, with various degrees of internal oxidation and different quantities of metallic nodules. CONCLUSIONS: Heating under reduced atmospheric pressure effectively improved the bond strength of the ceramic-to-Pd-Ag alloys.

Arginine-induced metabolomic perturbation in Streptococcus mutans.

BACKGROUND: Streptococcus mutans is a major pathogen responsible for dental caries. Arginine is a promising potential caries preventive agent which can inhibit the growth of S. mutans. However, the mechanism whereby arginine inhibits S. mutans growth remains unclear. AIM: To assess the impact of arginine-induced metabolomic perturbations on S. mutans under biofilm conditions. METHODS: We identified 5,933 and 7,413 ions in positive (ESI+) and negative (ESI-) electrospray ion modes, respectively, with a total of 11.05% and 11.58% differential ions subsequently detected in two respective modes. Further analyses of these metabolites led to identification of 8 and 22 metabolic pathways that were affected by arginine treatment in ESI+ and ESI- modes. RESULTS: Once or twice daily treatments of S. mutans biofilms with arginine resulted in reductions in biofilm biomass. Significant reductions in EPS production were observed following twice daily arginine treatments. Identified metabolites that were significantly differentially abundant following arginine treatment were associated with glycolysis metabolism, amino sugar and nucleotide sugar metabolism, and peptidoglycan synthesis. CONCLUSIONS: Arginine can reduce S. mutans biofilm growth and acid production by inhibiting glycolysis, amino sugar and nucleotide sugar metabolism, and peptidoglycan synthesis.

The Long Non-coding RNA lnc-DMP1 Regulates Dmp1 Expression Through H3K27Ac Modification.

Several long non-coding RNAs (lncRNAs) have been reported regulate the expression of neighbor protein-coding genes at post-transcriptional, transcriptional and epigenetic levels. Dmp1 (Dentin matrix protein 1), encoding a non-collagenous extracellular matrix protein, plays an important role in dentin and bone mineralization. However, the transcriptional regulation of lncRNA on Dmp1 has not been reported. In this study, we identified a novel lncRNA named lnc-DMP1, which is near the Dmp1 gene region and undergoes remarkable changes during mandible development. lnc-DMP1 is co-localized and significantly expressed correlation with Dmp1 in embryonic and postnatal mouse mandibles. In MC3T3-E1 cells, lnc-DMP1 positively regulates DMP1 expression and skeletal mineralization. Furthermore, lnc-DMP1 induces the promoter activity of Dmp1 by modulating H3K27Ac enrichment in the Dmp1 promoter. In conclusion, our results indicate that lnc-DMP1 is a novel lncRNA near the Dmp1 gene region and regulates Dmp1 expression by modulating the H3K27 acetylation level of Dmp1 promoter.

Thread shape affects the stress distribution of torque force on miniscrews: a finite element analysis.

This study aimed to investigate the effect of miniscrews thread shape on the stress distribution receiving a torque load. Seven thread shapes (S,V1,V2,B1,B2,R1,R2) models were constructed and a 6 Nmm-torque load was applied. The order of maximum equivalent stress (EQV) value was V1 > V2 > B1 > R1 > R2 > B2 > S. The order of maximum displacement of miniscrew (Max DM) value was S > B2 > R1 = V1 > B1 > V2 > R2. Model R2 may be the most appropriate thread shape affording a torque force.

Variation in Enamel Formation Genes Influences Enamel Demineralization In Vitro in a Streptococcus mutans Biofilm Model.

Genetic studies have shown that variations in enamel formation genes are associated with caries susceptibility. The aim of this study was to test in vitro whether variants in these genes are associated with dental enamel demineralization in a Streptococcus mutans biofilm model. DNA and enamel samples were obtained from 213 individuals. DNA was extracted from saliva, and 16 single nucleotide polymorphisms were analyzed. The physical and chemical properties of sound enamel samples and the mineral loss and the lesion depth of the demineralized enamel samples under cariogenic challenge were analyzed. Microhardness, enamel chemicals, mineral loss and demineralization depth were compared between different genotypes at each single nucleotide polymorphism. The GG genotype of TUFT1 (rs17640579) and the GT genotype of MMP20 (rs1612069) exhibited increased microhardness (p = 0.044 and 0.016, respectively). The GG genotype of AMBN (rs7694409) had a higher magnesium level, while the CT genotype of TFIP11 (rs2097470) had a lower magnesium level (p = 0.044 and 0.046, respectively). The GT genotype of MMP20 (rs1612069) had a higher calcium level (p = 0.034). The GG genotype of AMBN (rs13115627), the AG genotype of ENAM (rs12640848) and the AA genotype of MMP20 (rs2292730) had a lower phosphorus level (p = 0.012, 0.006, and 0.023, respectively). The GG genotype of AMBN (rs13115627) was also associated with a higher calcium-phosphorus ratio (p = 0.034). Individuals with the CC genotype of TFIP11 (rs134143) exhibited significantly more mineral loss (p = 0.011) and a deeper lesions (p = 0.042). Individuals with the TT genotype of TFIP11 (rs2097470) had more mineral loss (p = 0.018). Individuals with the GG genotype of TUFT1 (rs17640579) exhibited a shallower demineralization depth (p = 0.047). Individuals with the GT genotype of MMP20 (rs1612069) exhibited a shallower demineralization depth (p = 0.042). Individuals with the GG genotype of ENAM (rs12640848) exhibited less mineral loss (p = 0.01) and a shallower demineralization depth (p = 0.03). Genetic variations in TFIP11, TUFT1, MMP20, and ENAM influenced enamel demineralization in a Streptococcus mutans biofilm model.

Characterization of acid­tolerance­associated small RNAs in clinical isolates of Streptococcus mutans: Potential biomarkers for caries prevention.

Streptococcus mutans is a cariogenic bacterium that contributes to dental caries due to its ability to produce lactic acid, which acidifies the local environment. The potential of S. mutans to respond to environmental stress and tolerate low pH is essential for its survival and predominance in caries lesions. Small noncoding RNAs (sRNAs) have been reported to be involved in bacterial stress and virulence. Few studies have investigated the sRNAs of S. mutans and the function of these sRNAs remains to be elucidated. In the present study, the association between sRNA133474 and acid tolerance, including potential underlying mechanisms, were investigated within clinical strains of S. mutans. From pediatric dental plaques, 20 strains of S. mutans were isolated. An acid killing assay was performed to analyze acid tolerance of S. mutans. Expression patterns of sRNA133474 were investigated during various growth phases under various acidic conditions via reverse transcription­quantitative polymerase chain reaction. RNA predator and Kyoto Encyclopedia of Genes and Genomes analyses were performed to predict target mRNAs of sRNA133474 and to examine the involvement of putative pathways of target mRNAs, respectively. The results of the present study demonstrated that sRNA133474 activity was growth phase­dependent, and two distinct expression patterns were identified in 10 clinical strains. At pH 5.5 and 7.5 the expression levels of sRNA133474 were significantly different, and high­acid tolerant strains exhibited reduced expression levels of sRNA133474 compared with low­acid tolerant strains. A correlation between sRNA133474 expression levels and acid tolerance was observed in 20 clinical isolates of S. mutans (r=­0.6298, P<0.01). Finally, five target mRNAs (liaS, liaR, comE, covR and ciaR) involved in the two­component system (TCS) were selected for further evaluation; the expression levels of three target mRNAs (liaR, ciaR and covR) were negatively correlated with sRNA133474 expression levels. In conclusion, the results of the present study suggested that S. mutans may utilize sRNA133474 to orchestrate TCSs for optimal adaption to acidic pH in clinical strains.

Effect of pretreatments on the metal-ceramic bonding strength of a Pd-Ag alloy.

OBJECTIVES: The purpose of this study was to evaluate the efficacy of surface treatments on the bonding properties between a metal and ceramic. METHODS: Sixty metal specimens were divided equally into four groups of 15 samples each. These groups received different treatments (Gr1: 250µm Al2O3+preoxidation; Gr2: 250µm Al2O3+degassing; Gr3: 120µm Al2O3+preoxidation; Gr4: 120µm Al2O3+degassing). Bond strengths were evaluated using a three-point bending test. The results were analyzed using 2-way ANOVA and Tukey's test. Scanning electron microscopy and energy dispersive spectroscopy were used to observe the microscopic features, elemental compositions and distributions, and diffusion in the specimens. Mechanical profiler was used to measure the roughness of metal surface. RESULTS: The bond strengths of the four groups ranged from 45.00±3.63MPa to 51.61±5.91MPa, with significant differences (P<.05). The specimen that received the pretreatment of 250µm Al2O3 air-particle abrasion+degassing had the highest bond strength. Heating under different oxygen partial pressures caused the final Pd-Ag alloys to have varying degrees of internal oxidation and different quantities of metallic nodules. None of the elements in either the ceramic or the Pd-Ag alloy layer diffused into the other layer. CONCLUSIONS: The metal-ceramic specimen subjected to air-particle abrasion with 250µm Al2O3 and degassed before porcelain firing had significantly higher bond strength than specimens treated differently.