In Vitro and In Vivo Differentiation of Progenitor Stem Cells Obtained After Mechanical Digestion of Human Dental Pulp.

Human population is facing a revolutionary change in the demographic structure with an increasing number of elderly people requiring an unmet need to ensure a smooth aging process and dental care is certainly an important aspect that has to be considered. To date, dentistry has been conservative and the need of transferring the scientific models of regenerative dentistry into clinical practice is becoming a necessity. The aim of this study was to characterize the differentiation commitment (in vitro) and the clinical grafting ability (in vivo) of a population of progenitor stem cells obtained after mechanical digestion of dental pulp with an innovative system recently developed. This approach was successfully used in previous studies to obtain a clinical-grade ready to use dental pulp fragments that could be grafted in autologous tissues to obtain bone. We are thus showing that micro grafts resulting from mechanical digestion contain stem cells with a mesenchymal phenotype, able to differentiate toward different cell types and to generate new bone in patients. We are providing data for the establishment of standardized and routinely oral surgery approaches, having outlined the cellular properties of human stem cells obtained from the dental pulp. This method can represent a valid tool for both regenerative medicine and tissue engineering purposes not only applicable to the cranio-maxillofacial region but, likely, to different bone pathologies for a fastening and healing recovering of patients. J. Cell. Physiol. 232: 548-555, 2017. © 2016 Wiley Periodicals, Inc.

Human neural crest-derived postnatal cells exhibit remarkable embryonic attributes either in vitro or in vivo.

During human embryonic development, odontogenic tissues, deriving from the neural crest, remain undifferentiated until the adult age. This study was aimed at characterising the cells of the follicle enveloping the dental germ, due to its direct origin from neural crests. Sixty dental follicles were collected from patients aged 18 to 45 years. This research has clarified that dental follicles, if extracted in a very early stage, when dental roots did not start to be formed, contain a lineage of cells, characterised by a high degree of plasticity in comparison with other adult stem cell populations. In particular, we found that these cells share the following features with ES: (i) high levels of embryonic stem cell markers (CD90, TRA1-60, TRA1-81, OCT-4, CD133, and SSEA-4); (ii) mRNA transcripts for Nanog and Rex-1; (iii) broader potency, being able to differentiate in cell types of all three germ layer, including smooth and skeletal muscle, osteoblasts, neurons, glial cells, and adipocytes; (iv) high levels of telomerase activity; (v) ability to form embryoid bodies; (vi) ability, after injection in murine blastocysts, to be localised within the inner cell mass; (vii) no teratoma formation after injection; (viii) in vivo tissue formation after transplantation. Our results demonstrate that these cells represent a very easy accessible and extraordinary source of pluripotent cells and point out the fact that they own the cardinal feature of embryonic stem cells.

Human dental pulp stem cells: from biology to clinical applications.

Dental pulp stem cells (DPSCs) can be found within the "cell rich zone" of dental pulp. Their embryonic origin, from neural crests, explains their multipotency. Up to now, two groups have studied these cells extensively, albeit with different results. One group claims that these cells produce a "dentin-like tissue", whereas the other research group has demonstrated that these cells are capable of producing bone, both in vitro and in vivo. In addition, it has been reported that these cells can be easily cryopreserved and stored for long periods of time and still retain their multipotency and bone-producing capacity. Moreover, recent attention has been focused on tissue engineering and on the properties of these cells: several scaffolds have been used to promote 3-D tissue formation and studies have demonstrated that DPSCs show good adherence and bone tissue formation on microconcavity surface textures. In addition, adult bone tissue with good vascularization has been obtained in grafts. These results enforce the notion that DPSCs can be used successfully for tissue engineering.

Human mandible bone defect repair by the grafting of dental pulp stem/progenitor cells and collagen sponge biocomplexes.

In this study we used a biocomplex constructed from dental pulp stem/progenitor cells (DPCs) and a collagen sponge scaffold for oro-maxillo-facial (OMF) bone tissue repair in patients requiring extraction of their third molars. The experiments were carried out according to our Internal Ethical Committee Guidelines and written informed consent was obtained from the patients. The patients presented with bilateral bone reabsorption of the alveolar ridge distal to the second molar secondary to impaction of the third molar on the cortical alveolar lamina, producing a defect without walls, of at least 1.5 cm in height. This clinical condition does not permit spontaneous bone repair after extraction of the third molar, and eventually leads to loss also of the adjacent second molar. Maxillary third molars were extracted first for DPC isolation and expansion. The cells were then seeded onto a collagen sponge scaffold and the obtained biocomplex was used to fill in the injury site left by extraction of the mandibular third molars. Three months after autologous DPC grafting, alveolar bone of patients had optimal vertical repair and complete restoration of periodontal tissue back to the second molars, as assessed by clinical probing and X-rays. Histological observations clearly demonstrated the complete regeneration of bone at the injury site. Optimal bone regeneration was evident one year after grafting. This clinical study demonstrates that a DPC/collagen sponge biocomplex can completely restore human mandible bone defects and indicates that this cell population could be used for the repair and/or regeneration of tissues and organs.

Scaffold's surface geometry significantly affects human stem cell bone tissue engineering.

In this study, we have observed dental pulp stem cells (SBP-DPSCs) performances on different scaffolds, such as PLGA 85:15, hydroxyapatite chips (HA) and titanium. Stem cells were challenged with each engineered surface, either in plane cultures or in a rotating apparatus, for a month. Gingival fibroblasts were used as controls. Results showed that stem cells exerted a different response, depending on the different type of textured surface: in fact, microconcavities significantly affected SBP-DPSC differentiation into osteoblasts, both temporally and quantitatively, with respect to the other textured surfaces. Actually, stem cells challenged with concave surfaces differentiated quicker and showed nuclear polarity, an index of secretion, cellular activity and matrix formation. Moreover, bone-specific proteins were significantly expressed and the obtained bone tissue was of significant thickness. Thus, cells cultured on the concave textured surface had better cell-scaffold interactions and were induced to secrete factors that, due to their autocrine effects, quickly lead to osteodifferentiation, bone tissue formation, and vascularization. The worst cell performance was obtained using convex surfaces, due to the scarce cell proliferation on to the scaffold and the poor matrix secretion. In conclusion, this study stresses that for a suitable and successful bone tissue reconstruction the surface texture is of paramount importance.

Dental pulp stem cells: a promising tool for bone regeneration.

Human tissues are different in term of regenerative properties. Stem cells are a promising tool for tissue regeneration, thanks to their particular characteristics of proliferation, differentiation and plasticity. Several "loci" or "niches" within the adult human body are colonized by a significant number of stem cells. However, access to these potential collection sites often is a limiting point. The interaction with biomaterials is a further point that needs to be considered for the therapeutic use of stem cells. Dental pulp stem cells (DPSCs) have been demonstrated to answer all of these issues: access to the collection site of these cells is easy and produces very low morbidity; extraction of stem cells from pulp tissue is highly efficiency; they have an extensive differentiation ability; and the demonstrated interactivity with biomaterials makes them ideal for tissue reconstruction. SBP-DPSCs are a multipotent stem cell subpopulation of DPSCs which are able to differentiate into osteoblasts, synthesizing 3D woven bone tissue chips in vitro and that are capable to synergically differentiate into osteoblasts and endotheliocytes. Several studied have been performed on DPSCs and they mainly found that these cells are multipotent stromal cells that can be safety cryopreserved, used with several scaffolds, that can extensively proliferate, have a long lifespan and build in vivo an adult bone with Havers channels and an appropriate vascularization. A definitive proof of their ability to produce dentin has not been yet done. Interestingly, they seem to possess immunoprivileges as they can be grafted into allogenic tissues and seem to exert anti-inflammatory abilities, like many other mesenchymal stem cells. The easy management of dental pulp stem cells make them feasible for use in clinical trials on human patients.

Autologous Periosteum-Derived Micrografts and PLGA/HA Enhance the Bone Formation in Sinus Lift Augmentation.

Sinus lift augmentation is a procedure required for the placement of a dental implant, whose success can be limited by the quantity or quality of available bone. To this purpose, the first aim of the current study was to evaluate the ability of autologous periosteum-derived micrografts and Poly(lactic-co-glycolic acid) (PLGA) supplemented with hydroxyl apatite (HA) to induce bone augmentation in the sinus lift procedure. Secondly, we compared the micrograft's behavior with respect to biomaterial alone, including Bio-Oss® and PLGA/HA, commercially named Alos. Sinus lift procedure was performed on 24 patients who required dental implants and who, according to the study design and procedure performed, were divided into three groups: group A (Alos + periosteum-derived micrografts); group B (Alos alone); and group C (Bio-Oss® alone). Briefly, in group A, a small piece of periosteum was collected from each patient and mechanically disaggregated by Rigenera® protocol using the Rigeneracons medical device. This protocol allowed for the obtainment of autologous micrografts, which in turn were used to soak the Alos scaffold. At 6 months after the sinus lift procedure and before the installation of dental implants, histological and radiographic evaluations in all three groups were performed. In group A, where sinus lift augmentation was performed using periosteum-derived micrografts and Alos, the bone regeneration was much faster than in the control groups where it was performed with Alos or Bio-Oss® alone (groups B and C, respectively). In addition, the radiographic evaluation in the patients of group A showed a radio-opacity after 4 months, while after 6 months, the prosthetic rehabilitation was improved and was maintained after 2 years post-surgery. In summary, we report on the efficacy of periosteum-derived micrografts and Alos to augment sinus lift in patients requiring dental implants. This efficacy is supported by an increased percentage of vital mineralized tisssue in the group treated with both periosteum-derived micrografts and Alos, with respect to the control group of Alos or Bio-Oss® alone, as confirmed by histological analysis and radiographic evaluations at 6 months from treatment.

A new population of human adult dental pulp stem cells: a useful source of living autologous fibrous bone tissue (LAB).

UNLABELLED: Stem cells, derived from human adult dental pulp of healthy subjects 30-45 years of age, were cultured, and cells were selected using a FACSorter. A new c-kit+/CD34+/CD45- cell population of stromal bone producing cells (SBP/DPSCs) was selected, expanded, and cultured. These SBP/DPSCs are highly clonogenic and, in culture, differentiate into osteoblast precursors (CD44+/RUNX-2+), still capable of self-renewing, and then in osteoblasts, producing, in vitro, a living autologous fibrous bone (LAB) tissue, which is markedly positive for several bone antibodies. This tissue constitute an ideal source of osteoblasts and mineralized tissue for bone regeneration. In fact, after in vivo transplantation into immunocompromised rats, LAB formed lamellar bone-containing osteocytes. INTRODUCTION: Recently it has been reported that human dental pulp stem cells (DPSCs) are detectable, in humans, only up to the age of 30 years and that they are able to produce in vitro only sporadic calcified nodules and to form, after transplantation in vivo, a mineralized tissue. MATERIALS AND METHODS: Stem cells, derived from human adult dental pulp of healthy subjects 30-45 years of age, were cultured, and cells were selected using a FACSorter. Light microscope, histochemistry, immunofluorescence, and RT-PCR analyses were performed to study both stem and differentiating cells. RESULTS AND CONCLUSIONS: A new c-kit+/CD34+/CD45- cell population of stromal bone producing cells (SBP/DPSCs) has been selected by FACSorting, expanded, and cultured. These SBP/DPSCs are highly clonogenic and, in culture, differentiate into osteoblast precursors (CD44+/RUNX-2+), still capable of self-renewing, and in osteoblasts, producing, in vitro, a living autologous fibrous bone (LAB) tissue. This new-formed tissue is markedly positive for several antibodies for bone, including osteonectin, bone sialoprotein, osteocalcin, fibronectin, collagen III, and bone alkaline phosphatase (BALP). Cells producing LAB can be stored at -80 degrees C for a long period of time and are an extraordinary source of osteoblasts and mineralized fibrous bone tissue. In this study, we also showed that, in aged humans, stem cells can be detected from their pulps. The produced LAB is a fibrous bone tissue resembling the human bone during mineralization, with an external layer formed by osteoblasts markedly positive for osteocalcin. This newly formed tissue constitute an ideal source of osteoblasts and mineralized tissue for bone regeneration. In fact, after in vivo transplantation into immunocompromised rats, LAB formed lamellar bone containing osteocytes.

Piezoelectric device vs. conventional rotative instruments in impacted third molar surgery: relationships between surgical difficulty and postoperative pain with histological evaluations.

PURPOSE: To investigate and compare the influence of surgical difficulty on postoperative pain after treatment of impacted mandibular third molars by rotatory osteotomy or Piezoelectric surgery. MATERIALS AND METHODS: A prospective, randomized, split-mouth study was performed of 52 patients with bilateral and symmetrically oriented impacted mandibular third molars, who were surgically treated using a burr (Group A) on one random side of the lower jaw and a Piezoelectric device (Group B) on the contralateral side. Surgical difficulty was evaluated using a modified version of the Parant scale to categorize "simple extractions" and "complex extractions". Primary outcome parameters were the comparison of the postoperative pain evaluation rated on the Visual Analogue Scale from day 0 to day 6 postsurgery, and the assessment of differences in surgery time between the groups. Bone biopsies were taken during surgery to assess differences in bone tissue damage levels between the two different techniques. RESULTS: In "complex extractions" lower pain evaluation and significantly shorter surgery times were recorded when rotatory instruments were used. In "simple extractions", similar surgery times were observed for both techniques, but pain was greatest on the day of surgery when the burr was used. Bone heat osteonecrosis was observed only in the rotatory group and a high level of alkaline phosphatase was noted only in the Piezoelectric group. CONCLUSION: Pain after extraction of a mandibular third molar increases with increased surgical difficulty and especially in longer interventions. The integrity of the bony structure observed after the ultrasonic technique may favour the bone healing process.

Sinus lift tissue engineering using autologous pulp micro-grafts: A case report of bone density evaluation.

BACKGROUND: Although autografts are the standard procedure for bone grafting, the use of bone regeneration by means of dental pulp stem cell is an alternative that opens a new era in this field. Rigenera Protocol is a new technique able to provide the surgeon autologous pulp micro-grafts. MATERIALS AND METHODS: At the Department of Oral Surgery, Don Orione Hospital, Bergamo, Italy, one patient underwent sinus lift elevation with pulp stem micro-grafts gentle poured onto collagen sponge. A CT scan control was performed after 4 months and DICOM data were processed with medical imaging software which gives the possibility to use a virtual probe to extract the bone density. Pearson's Chi-square test was used to investigate difference in bone density (BD) between native and newly formed bone. RESULTS: BD in newly formed bone is about the double of native bone. CONCLUSION: This report demonstrated that micro-grafts derived from dental pulp poured onto collagen sponge are a useful method for bone regeneration in atrophic maxilla.

Three years after transplants in human mandibles, histological and in-line holotomography revealed that stem cells regenerated a compact rather than a spongy bone: biological and clinical implications.

Mesenchymal stem cells deriving from dental pulp differentiate into osteoblasts capable of producing bone. In previous studies, we extensively demonstrated that, when seeded on collagen I scaffolds, these cells can be conveniently used for the repair of human mandible defects. Here, we assess the stability and quality of the regenerated bone and vessel network 3 years after the grafting intervention, with conventional procedures and in-line holotomography, an advanced phase-imaging method using synchrotron radiation that offers improved sensitivity toward low-absorbing structures. We found that the regenerated tissue from the graft sites was composed of a fully compact bone with a higher matrix density than control human alveolar spongy bone from the same patient. Thus, the regenerated bone, being entirely compact, is completely different from normal alveolar bone. Although the bone regenerated at the graft sites is not of the proper type found in the mandible, it does seem to have a positive clinical impact. In fact, it creates steadier mandibles, may well increase implant stability, and, additionally, may improve resistance to mechanical, physical, chemical, and pharmacological agents.

Methods for the identification, characterization and banking of human DPSCs: current strategies and perspectives.

Dental pulp stem cells (DPSCs), originating from neural crests, can be found within dental pulp. Up to now, it has been demonstrated that these cells are capable of producing bone tissue, both in vitro and in vivo and differentiate into adipocytes, endotheliocytes, melanocytes, neurons, glial cells, and can be easily cryopreserved and stored. Moreover, recent attention has been focused on tissue engineering and on the properties of these cells. In addition, adult bone tissue with good vascularisation has been obtained in grafts. The latest use in clinical trials for bone repair enforces the notion that DPSCs can be used successfully in patients. Therefore, their isolation, selection, differentiation and banking is of great importance. The isolation and detection techniques used in most laboratories are based on the use of antibodies revealed by flow-cytometers with cell sorter termed FACS (fluorescent activated cell sorter). In this report, we focus our attention on the main procedures used in the selection of DPSCs by flow cytometry, cell culture, freezing/thawing, cell cycle evaluation, histochemistry/immunofluorescence and differentiation of DPSCs. In addition, new methods/protocols to select and isolate stem cells without staining by fluorescent markers for implementation in biomedical/clinical laboratories are discuss. We emphasize that the new methods must address simplicity and short times of preparation and use of samples, complete sterility of cells, the potential disposable, low cost and complete maintenance of the viability and integrity of the cells with real-time response for subsequent applications in the biomedical/clinical/surgical fields.

Amniotic fluid-derived mesenchymal stem cells lead to bone differentiation when cocultured with dental pulp stem cells.

Mesenchymal stem cells are present in many tissues of the human body, including amniotic fluid (AF) and dental pulp (DP). Stem cells of both AF and DP give rise to a variety of differentiated cells. In our experience, DP stem cells (DPSCs) display a high capacity to produce bone. Therefore, our aim was to investigate if AF-derived stem cells (AFSCs) were able to undergo bone differentiation in the presence of DPSCs. AFSCs were seeded under three different conditions: (i) cocultured with DPSCs previously differentiated into osteoblasts; (ii) cultured in the conditioned medium of osteoblast-differentiated DPSCs; (iii) cultured in the osteogenic medium supplemented with vascular endothelial growth factor and bone morphogenetic protein-2 (BMP-2). Results showed that AFSCs were positive for mesenchymal markers, and expressed high levels of Tra1-60, Tra1-80, BMPR1, BMPR2, and BMP-2. In contrast, AFSCs were negative for epithelial and hematopoietic/endothelial markers. When AFSCs were cocultured with DPSCs-derived osteoblasts, they differentiated into osteoblasts. A similar effect was observed when AFSCs were cultured in the presence of a conditioned medium originated from DPSCs. We found that osteoblasts derived from DPSCs released large amounts of BMP-2 and vascular endothelial growth factor into the culture medium and that those morphogens significantly upregulate RUNX-2 gene, stimulating osteogenesis. This study highlights the mechanisms of osteogenesis and strongly suggests that the combination of AFSCs with DPSCs may provide a rich source of soluble proteins useful for bone engineering purposes.

Human dental pulp stem cells hook into biocoral scaffold forming an engineered biocomplex.

The aim of this study was to evaluate the behavior of human Dental Pulp Stem Cells (DPSCs), as well as human osteoblasts, when challenged on a Biocoral scaffold, which is a porous natural hydroxyapatite. For this purpose, human DPSCs were seeded onto a three-dimensional (3D) Biocoral scaffold or on flask surface (control). Either normal or rotative (3D) cultures were performed. Scanning electron microscopic analyses, at 8, 24 and 48 h of culture showed that cells did not adhere on the external surface, but moved into the cavities inside the Biocoral structure. After 7, 15 and 30 days of culture, morphological and molecular analyses suggested that the Biocoral scaffold leads DPSCs to hook into the cavities where these cells quickly start to secrete the extra cellular matrix (ECM) and differentiate into osteoblasts. Control human osteoblasts also moved into the internal cavities where they secreted the ECM. Histological sections revealed a diffuse bone formation inside the Biocoral samples seeded with DPSCs or human osteoblasts, where the original scaffold and the new secreted biomaterial were completely integrated and cells were found within the remaining cavities. In addition, RT-PCR analyses showed a significant increase of osteoblast-related gene expression and, above all, of those genes highly expressed in mineralized tissues, including osteocalcin, OPN and BSP. Furthermore, the effects on the interaction between osteogenesis and angiogenesis were observed and substantiated by ELISA assays. Taken together, our results provide clear evidence that DPSCs differentiated into osteoblasts, forming a biocomplex made of Biocoral, ECM and differentiated cells.

The osteoblastic differentiation of dental pulp stem cells and bone formation on different titanium surface textures.

Bone Tissue Engineering (BTE) and Dental Implantology (DI) require the integration of implanted structures, with well characterized surfaces, in bone. In this work we have challenged acid-etched titanium (AET) and Laser Sintered Titanium (LST) surfaces with either human osteoblasts or stem cells from human dental pulps (DPSCs), to understand their osteointegration and clinical use capability of derived implants. DPSCs and human osteoblasts were challenged with the two titanium surfaces, either in plane cultures or in a roller apparatus within a culture chamber, for hours up to a month. During the cultures cells on the titanium surfaces were examined for histology, protein secretion and gene expression. Results show that a complete osteointegration using human DPSCs has been obtained: these cells were capable to quickly differentiate into osteoblasts and endotheliocytes and, then, able to produce bone tissue along the implant surfaces. Osteoblast differentiation of DPSCs and bone morphogenetic protein production was obtained in a better and quicker way, when challenging stem cells with the LST surfaces. This successful BTE in a comparatively short time gives interesting data suggesting that LST is a promising alternative for clinical use in DI.

Comparison between genetic portraits of osteoblasts derived from primary cultures and osteoblasts obtained from human pulpar stem cells.

Harvesting bone for autologous grafting is a daily problem encountered by craniofacial and oral surgeons. Stem cells derived from human dental pulp are able to differentiate in osteoblasts and are a potential source of autologous bone produced in vitro. However, as stem cells are characterized by self-renewing and commitment in several cellular subtypes (ie, pluripotential differentiation), some concerns may arise as regards their potential uncontrolled proliferation. To screen the behavior of osteoblasts derived from human pulpar stem cells (ODHPSCs), we used microarray techniques to identify genes that are differently regulated in ODHPSC in comparison to normal osteoblasts (NOs). Osteoblasts derived from human pulpar stem cells were obtained from human dental pulp, and cells were selected using a cytometer. The cell profile was c-kit+/CD34+/STRO-1+/CD45-. These cells were capable of differentiation of osteoblasts in vitro. By using DNA microarrays containing 19,200 genes, we identified in ODHPSC some genes whose expression was significantly up- and downregulated compared to NO. The differentially expressed genes have different functional activities: (a) cell differentiation, (b) developmental maturation, (c) cell adhesion, and (d) production of cytoskeleton elements. Thus, some molecular differences exist between NO and ODHPSC, although the previously considered histologic parameters show a normal phenotype.

Concave pit-containing scaffold surfaces improve stem cell-derived osteoblast performance and lead to significant bone tissue formation.

BACKGROUND: Scaffold surface features are thought to be important regulators of stem cell performance and endurance in tissue engineering applications, but details about these fundamental aspects of stem cell biology remain largely unclear. METHODOLOGY AND FINDINGS: In the present study, smooth clinical-grade lactide-coglyolic acid 85:15 (PLGA) scaffolds were carved as membranes and treated with NMP (N-metil-pyrrolidone) to create controlled subtractive pits or microcavities. Scanning electron and confocal microscopy revealed that the NMP-treated membranes contained: (i) large microcavities of 80-120 microm in diameter and 40-100 microm in depth, which we termed primary; and (ii) smaller microcavities of 10-20 microm in diameter and 3-10 microm in depth located within the primary cavities, which we termed secondary. We asked whether a microcavity-rich scaffold had distinct bone-forming capabilities compared to a smooth one. To do so, mesenchymal stem cells derived from human dental pulp were seeded onto the two types of scaffold and monitored over time for cytoarchitectural characteristics, differentiation status and production of important factors, including bone morphogenetic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF). We found that the microcavity-rich scaffold enhanced cell adhesion: the cells created intimate contact with secondary microcavities and were polarized. These cytological responses were not seen with the smooth-surface scaffold. Moreover, cells on the microcavity-rich scaffold released larger amounts of BMP-2 and VEGF into the culture medium and expressed higher alkaline phosphatase activity. When this type of scaffold was transplanted into rats, superior bone formation was elicited compared to cells seeded on the smooth scaffold. CONCLUSION: In conclusion, surface microcavities appear to support a more vigorous osteogenic response of stem cells and should be used in the design of therapeutic substrates to improve bone repair and bioengineering applications in the future.

An approachable human adult stem cell source for hard-tissue engineering.

Stem cells were obtained from deciduous dental pulp of healthy subjects, aged 6-10 years. This stem cell population was cultured, expanded, and specifically selected, detecting using a FACsorter, c-kit, CD34, and STRO-1 antigen expression. Then, c-kit+/CD34+/STRO-1+ cells were replaced in the culture medium added of 20% FBS, leading to osteoblast differentiation. In fact, these cells, after a week, showed a large positivity for CD44, osteocalcin, and RUNX-2 markers. To achieve an adipocytic differentiation, cells, after sorting, were challenged with dexamethason 10(-8) mM in the same culture medium. To obtain myotube fusion, sorted cells were co-cultured in ATCC medium with mouse myogenic C2C12 cells and, after a week, human stem cell nuclei were found to be able to fuse, forming myotubes. Differentiated osteoblasts, as assessed by a large positivity to several specific antibodies, after 30 days of culture and already in vitro, started to secrete an extracellular mineralized matrix, which, 2 weeks later, built a considerable number of 3D woven bone samples, which showed a strong positivity to alkaline phosphatase (ALP), alizarin red, calcein, other than to specific antibodies. These bone samples, after in vivo transplantation into immunosuppressed rats, were remodeled in a lamellar bone containing entrapped osteocytes. Therefore, this study provides strong evidence that human deciduous dental pulp is an approachable "niche" of stromal stem cells, and that it is an ideal source of osteoblasts, as well as of mineralized tissue, ready for bone regeneration, transplantation, and tissue-based clinical therapies.

Long-term cryopreservation of dental pulp stem cells (SBP-DPSCs) and their differentiated osteoblasts: a cell source for tissue repair.

It is not known whether cells derived from stem cells retain their differentiation and morpho-functional properties after long-term cryopreservation. This information is of importance to evaluate their potential for long-term storage with a view to subsequent use in therapy. Here, we describe the morpho-functional properties of dental pulp stem cells (SBP-DPSCs), and of their differentiated osteoblasts, recovered after long-term cryopreservation. After storage for 2 years, we found that stem cells are still capable of differentiation, and that their differentiated cytotypes proliferate and produce woven bone tissue. In addition, cells still express all their respective surface antigens, confirming cellular integrity. In particular, SBP-DPSCs differentiated into pre-osteoblasts, showing diffuse positivity for ALP, BAP, RUNX-2, and calcein. Recovered osteoblasts expressed bone-specific markers and were easily recognizable ultrastructurally, with no alterations observed at this level. In addition, after in vivo transplantation, woven bone converted into a 3D lamellar bone type. Therefore, dental pulp stem cells and their osteoblast-derived cells can be long-term cryopreserved and may prove to be attractive for clinical applications.

In vitro bone production using stem cells derived from human dental pulp.

To harvest bone for autologous grafting is a daily problem encountered by craniofacial and oral surgeons. Stem cells derived from human dental pulp are able to differentiate in osteoblasts and are a potential source of autologous bone produced in vitro. The authors describe their preliminary results in this new field with its potential application in craniomaxillofacial surgery. Dental pulp was gently extracted from 34 human permanent teeth (all third molars) of patients 19 to 37 years of age. After they were digested, the cells were selected using a cytometer for c-kit, STRO-1, CD34, CD45, and then for CD44 and RUNX-2. This study, made on a considerable number of cases, provided evidence that dental pulp is extremely rich in stem cells, which were c-kit+/CD34+/STRO-1+/CD45-, capable of differentiation toward several stromal-derived differentiated cells and mainly osteoblasts. These findings, supported by the large number of cases, are of great interest for tissue regeneration, tissue-based clinical therapies, and transplantation.