RESUMEN
This dental technique describes a protocol for adhesive fiber post removal using a prototyped endodontic guide. The removal of an adhesive fiber post is an important step for endodontic retreatment and the resolution of prosthetic problems. Computer-aided design and computer-aided manufacturing (CAD-CAM) technology was used to generate guides with prototyping and is a useful tool for fiber post removal.
Asunto(s)
Diseño Asistido por Computadora , Cementos DentalesRESUMEN
PURPOSE: The aim of this study was to evaluate the effectiveness of adhesive primers (APs) applied to Co-Cr and Ni-Cr metal alloys on the bond strength of resin cements to alloys. MATERIALS AND METHODS: Eight cementing systems were evaluated, consisting of four resin cements (Bistite II DC, LinkMax, Panavia F 2.0, RelyX Unicem) with or without their respective APs (Metaltite, Metal Primer II, Alloy Primer, Ceramic Primer). The two types of dental alloys (Co-Cr, Ni-Cr) were cast in plate specimens (10 x 5 x 1 mm(3)) from resin patterns. After casting, the plates were sandblasted with aluminum oxide (100 microm) and randomly divided into eight groups (n = 6). Each surface to be bonded was treated with one of eight cementing systems. Three resin cement cylinders (0.5 mm high, 0.75 mm diameter) were built on each bonded metal alloy surface, using a Tygon tubing mold. After water storage for 24 hours, specimens were subjected to micro-shear testing. Data were statistically analyzed by two-way ANOVA and Tukey's studentized range test. RESULTS: The application of Metal Primer II resulted in a significantly higher bond strength for LinkMax resin cement when applied in both metal alloys. In general, the cementing systems had higher bond strengths in Co-Cr alloy than in Ni-Cr. CONCLUSIONS: The use of AP between alloy metal surfaces and resin cements did not increase the bond strength for most cementing systems evaluated.
Asunto(s)
Aleaciones de Cromo , Cementos de Resina , Auto-Curación de Resinas Dentales , Adhesivos , Análisis de Varianza , Cobalto , Análisis del Estrés Dental , Ensayo de Materiales , Níquel , Distribución Aleatoria , Resistencia al Corte , Estadísticas no ParamétricasRESUMEN
The localization of partial or completed root canal obliteration is a challenging task in endodontic practice. Recently, guided endodontics has become an alternative solution for those cases. Although this technique has already been used clinically in managing anterior teeth, in this report, we describe 3 complex clinical scenarios of calcified root canals of 1 molar and 2 premolars using guided endodontics. The clinical cases reported here show that technological evolutions should make guided endodontic procedures more widespread because their execution is relatively fast and safe even in the case of the upper molar. Additionally, 12-month clinical follow-up visits showed the effectiveness of the guided endodontic procedures.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Calcificaciones de la Pulpa Dental/diagnóstico por imagen , Calcificaciones de la Pulpa Dental/cirugía , Cavidad Pulpar/diagnóstico por imagen , Cavidad Pulpar/cirugía , Endodoncia/métodos , Maxilar , Radiografía Dental , Tratamiento del Conducto Radicular/métodos , Cirugía Asistida por Computador/métodos , Anciano , Diente Premolar , Femenino , Estudios de Seguimiento , Humanos , Imagenología Tridimensional , Persona de Mediana Edad , Diente Molar , Factores de Tiempo , Resultado del TratamientoRESUMEN
OBJECTIVE: To test the hypothesis that dentin Hertzian contact response varies with loading rate and tubule orientation. DESIGN: Sound teeth (n=12) were cut either parallel or perpendicular to the axial direction to expose dentin (n=6 each). The cut specimens were embedded (poly-methyl-methacrylate (PMMA) and divided into two groups: (GL) load applied parallel to dentin tubule direction and (GP) load applied perpendicular to tubule direction. A 1.5mm diameter tungsten-carbide ball was used for Hertzian contact testing with a maximum load of 150 N load and loading rates of 0.1, 1, 100, and 1000 N/s on each specimen. Indented specimens were observed microscopically and photomicrographs acquired. Hertzian contact diameter and modulus were analysed (p<0.05) by one-way ANOVA and Tukey test. RESULTS: There were significant differences (p<0.05) in Hertzian response with respect to loading rate for GL (0.1N/s versus 1000 N/s, 0.1N/s versus 100 N/s, 1N/s versus 1000 N/s, and 1N/s versus 100 N/s), and GP (0.1N/s versus 1000 N/s, 0.1N/s versus 100 N/s, and 1N/s versus 1000 N/s). Contact modulus was higher for GL compared to GP at all loading rates (p<0.05). CONCLUSION: The results suggest that dentin contact modulus is loading rate dependent. Tubule orientation of dentin did not influence contact modulus values (p>0.05).
Asunto(s)
Dentina/ultraestructura , Estrés Mecánico , Análisis del Estrés Dental/métodos , Humanos , Imagenología Tridimensional , OrientaciónRESUMEN
INTRODUCTION: Disinfection of dentin surfaces is desirable so long as it does not interfere with subsequent bonding of adhesive resins. OBJECTIVE: To test the null hypothesis that bond strengths to dentin are not affected by previous application of an iodine disinfecting solution. MATERIALS AND METHODS: Twenty-four extracted non-carious molars were selected. Occlusal enamel was removed producing a flat dentin substrate. Test teeth were all treated with 2% Iodine disclosing/disinfecting solution (I(2)DDS) for 20 sec and rinsed for 20 sec followed by the application of self- or total- etching bonding systems, generating five adhesive groups (n=3): Single Bond; Prime & Bond NT; Clearfil SE Bond; Opti-Bond Plus. The control groups (n=3 per adhesive) had no disclosing/disinfectant application prior to adhesive application. A 4-mm thick resin restoration was built up on each tooth for microtensile testing. Statistical analyses between experimental and control groups were performed by student's t-test (alpha= 0.05). RESULTS: In general, experimental groups (previously treated with I(2)DDS) showed significantly lower bond strength values when compared with their respective controls (p<0.05), except for group Prime & Bond I(2) that did not significantly differ from its control (p>0.05). CONCLUSION: Acetone-base adhesive systems seem not to be affected by the application of I(2)DDS prior to etching and bonding procedures.