Tailoring molecularly imprinted polymer on titanium-multiwalled carbon nanotube functionalized gold electrode for enhanced chlorophyll determination in microalgae health assessment.

A unique method for determining chlorophyll content in microalgae is devised employing a gold interdigitated electrode (G-IDE) with a 10-µm gap, augmented by a nano-molecularly imprinted polymer (nano-MIP) and a titanium dioxide/multiwalled carbon nanotube (TiO2/MWCNT) nanocomposite. The nano-MIP, produced using chlorophyll template voids, successfully trapped chlorophyll, while the TiO2/MWCNT nanocomposite, synthesized by the sol-gel technique, exhibited a consistent distribution and anatase crystalline structure. The rebinding of procured chlorophyll powder, which was used as a template for nano-MIP synthesis, was identified with a high determination coefficient (R2 = 0.9857). By combining the TiO2/MWCNT nanocomposite with nano-MIP, the G-IDE sensing method achieved a slightly better R2 value of 0.9892 for detecting chlorophyll in microalgae. The presented G-IDE sensor showed a significant threefold enhancement in chlorophyll detection compared with commercially available chlorophyll powder. It had a detection limit of 0.917 mL (v/v) and a linear range that spanned from 10-6 to 1 mL. The effectiveness of the sensor in detecting chlorophyll in microalgae was confirmed through validation of its repeatability and reusability.

Microalgae cultivation trials in a membrane bioreactor operated in heterotrophic, mixotrophic, and phototrophic modes using ammonium-rich wastewater: The study of fouling.

In this work, microalgae cultivation trials were carried out in a membrane bioreactor to investigate fouling when the cultures of Chlorellavulgaris were grown under mixotrophic, heterotrophic, and phototrophic cultivation regimes. The Chlorella cultures were cultivated in wastewater as a source of nutrients that contained a high concentration of ammonium. In mixotrophic cultivation trials, the results showed that the elevated contents of carbohydrates in the soluble microbial product and proteins in extracellular polymeric substances probably initiated membrane fouling. In this case, the highest protein content was also found in extracellular polymeric substances due to the high nitrogen removal rate. Consequently, transmembrane pressure significantly increased compared to the phototrophic and heterotrophic regimes. The data indicated that cake resistance was the main cause of fouling in all cultivations. Higher protein content in the cake layer made the membrane surface more hydrophobic, while carbohydrates had the opposite effect. Compared to a mixotrophic culture, a phototrophic culture had a larger cell size and higher hydrophobicity, leading to less membrane fouling. Based on our previous data, the highest ammonia removal rate was reached in the mixotrophic cultures; nevertheless, membrane fouling appeared to be the fundamental problem.

Toxicity Effects of Polystyrene Nanoplastics with Different Sizes on Freshwater Microalgae Chlorella vulgaris.

The ubiquitous nature of plastics, particularly nanoplastics, raises concern about their potential effects on primary producer microalgae. Currently, the impacts and potential mechanisms of nanoplastics on microalgae are not fully understood. In this study, the effects of two plain commercial polystyrene nanoplastics (PS-NPs) with different sizes (50 nm and 70 nm) on C. vulgaris were assessed in a concentration range of 0-50 mg/L during 72 h exposure periods. Results revealed that both PS-NPs have dose-dependent toxicity effects on C. vulgaris, as confirmed by the decrease of growth rates, chlorophyll a and esterase activities, and the increase of ROS, MDA, and membrane damage. The membrane damage was caused by the agglomeration of PS-NPs on microalgae and may be the key reason for the toxicity. Compared with 70 nm PS-NPs (72 h EC50 >50 mg/L), 50 nm PS-NPs posed greater adverse effects on algae, with an EC50-72h of 19.89 mg/L. FTIR results also proved the stronger variation of macromolecules in the 50 nm PS-NPs treatment group. This phenomenon might be related to the properties of PS-NPs in exposure medium. The lower absolute zeta potential value of 50 nm PS-NPs induced the stronger interaction between PS-NPs and algae as compared to 70 nm PS-NPs, leading to severe membrane damage and the loss of esterase activity as well as settlement. These findings emphasized the importance of considering the impacts of commercial PS-NPs properties in toxicity evaluation.

Adsorption mechanism of trace heavy metals on microplastics and simulating their effect on microalgae in river.

Microplastics (MPs) and heavy-metal contamination in freshwater is an increasing concern. Fe, Mn, Pb, Zn, Cr, and Cd are common heavy metals that can easily flow into rivers causing water pollution. Microplastics act as carriers for heavy metals and increase the transport of contaminants in freshwater systems. We investigated the adsorption mechanisms of three kinds of MPs having similar particle sizes, namely polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC), with respect to trace heavy metals of Pb, Cu, Cr, and Cd under different temperature and salinity conditions. The reaction kinetics of the adsorption of different trace heavy metals on different MPs were consistent with both the quasi primary and quasi secondary kinetic models, indicating the complexity of heavy metal adsorption by MPs. The adsorption rate of heavy metal on MPs was mainly controlled by intra-particle diffusion, and the isotherm model indicated that the adsorption of Pb, Cu, Cr, and Cd by MPs occurred in the form of monolayer physical adsorption. Additionally, an increase in temperature and decrease in salinity were favourable to improve the affinity of MPs toward heavy metals (through adsorption). Zeta potential measurements and Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses indicated that electrostatic force interaction was the main mechanism of the adsorption process; oxygen-containing functional groups, π-π interaction, and halogen bonds played important roles in the process of adsorption. Furthermore, the growth inhibition and oxidative stress of microalgae Chlorella vulgaris (GY-D27) due to PP, PS, and PVC were analysed; notably, MPs or Pb inhibited the growth of Chlorella vulgaris. However, the reduced toxicity to Chlorella vulgaris, with respect to a mixture of Pb and MPs, was confirmed using superoxide dismutase and catalase enzyme activities. Our results can be applied for the risk assessment of heavy metals and MPs in aquatic environments.

Elucidating the negatively influential and potentially toxic mechanism of single and combined micro-sized polyethylene and petroleum to Chlorella vulgaris at the cellular and molecular levels.

Although microplastics (MPs; <5 mm) may interact with co-contaminants (e.g., petroleum) in marine aquatic systems, little is known about their combined toxicity. Therefore, this study explored the toxicities and their mechanisms of micro-sized polyethylene (mPE) and their combination with petroleum to Chlorella vulgaris. The single MPs at various particle sizes, concentrations, and aging degree, single petroleum, and their combinations, were found to pose toxicities to C. vulgaris. This study also found the microcosm's microbial diversity changed. The microbial communities in the C. vulgaris biotopes were altered under exposure to mPE and petroleum, and were disturbed by external factors such as MPs particle size, concentration, aging time, and the combination with petroleum. Furthermore, as compared with the toxicity of petroleum on microalgal transcriptional function, mPE caused less toxic to C. vulgaris, and only impact the posttranslational modification, protein turnover, and signal transduction processes. Most importantly, mPE reduced petroleum toxicity in C. vulgaris via regulating the ABC transporter, eukaryotic ribosome synthesis, and the citrate cycle metabolic pathways. Overall, our findings could fundamentally provide insights into the joint ecotoxicological effects of MPs and petroleum, and highlight the potential risks of co-exsiting pollutants.

Aged microplastics decrease the bioavailability of coexisting heavy metals to microalga Chlorella vulgaris.

Environmental aging of ubiquitous microplastics (MP) occurs through the action of biotic and abiotic factors, and aged MP exhibit different physicochemical properties and environmental behavior from virgin MP. This study aimed to investigate the aged micro-sized polystyrene (mPS) and polyvinyl chloride (mPVC), and the heavy metals copper (Cu) and cadmium (Cd), and examine the effects of their combined toxicities on microalga Chlorella vulgaris. Results showed that the presence of MP inhibited cell growth as compared with the control, the inhibition rate (I) decreased as concentrations of MP rose and aged MP exhibited stronger inhibition of cells than did virgin MP. The largest I was achieved in each culture with the MP concentration of 0.01 g/L, in which aged mPS with the maximal of 36.84% (Iaged mPS) followed by aged mPVC (Iaged mPVC = 30.03%), virgin mPS (Ivirgin mPS = 29.10%) and virgin mPVC (Ivirgin mPVC = 16.72%). Addition of the heavy metals Cu2+ and Cd2+ significantly inhibited cell growth, and toxicity increased with concentrations in a range of 0.5-2.0 mg/L; the maximum I values were 19.50% (ICu) and 85.14% (ICd), respectively. The combined toxicity of aged MP + Cu or aged MP + Cd was less than that of individual heavy metals. In particular, as compared with the maximal ICd of 85.14% achieved by single Cd2+, the toxicity of Cd2+ was greatly reduced when combined with aged mPS and mPVC, with the I value decreased to 27.55% (Iaged mPS) and 32.51% (Iaged mPVC), respectively. Both single and combined treatments caused cell damage to the microalga, accompanied by increased superoxide dismutase (SOD) and intracellular malonaldehyde (MDA) content.

Cyanobacteria and Microalgae as Sources of Functional Foods to Improve Human General and Oral Health.

In the scenario of promising sources of functional foods and preventive drugs, microalgae and cyanobacteria are attracting global attention. In this review, the current and future role of microalgae as natural sources of functional foods for human health and, in particular, for oral health has been reported and discussed in order to provide an overview on the state of art on microalgal effects on human oral health. It is well known that due to their richness in high-valuable products, microalgae offer good anti-inflammatory, antioxidant, antitumoral, anti-glycemic, cholesterol-lowering, and antimicrobial activity. Moreover, the findings of the present research show that microalgae could also have a significant impact on oral health: several studies agree on the potential application of microalgae for oral cancer prevention as well as for the treatment of chronic periodontitis and different oral diseases with microbial origin. Thus, beneficial effects of microalgae could be implemented in different medical fields. Microalgae and cyanobacteria could represent a potential natural alternative to antibiotic, antiviral, or antimycotic therapies, as well as a good supplement for the prevention and co-adjuvant treatment of different oral diseases. Nevertheless, more studies are required to identify strains of interest, increase overall functioning, and make safe, effective products available for the whole population.

In-situ self-assembly of plant polyphenol-coated Fe3O4 particles for oleaginous microalgae harvesting.

Plant polyphenol (PP), a natural polymer from the Larix gmelinii, was selected as the surfactant to synthesize Fe3O4. The Fe3O4-PP composite was prepared by in-situ self-assembly in solvothermal synthesis, and characterized using FE-SEM, TEM, XRD, FTIR, XPS, TGA, and VSM. The harvesting efficiency of Chlorella vulgaris was investigated under different parameters, including algal organic matter, dosage, and pH. The results showed that the core-shell sphere of Fe3O4-PP (∼150 nm) was coated by ∼50 nm PP with a saturated magnetization of 40.0 emu/g. The Fe3O4-PP could be directly applied to the culture broth (1.5 g dry cell weight/L, pH = 9.03), achieving 93.0% of harvesting efficiency at 20 g/L. Cells were detached from the harvested aggregates by adjusting pH value to 9.80 and with ultrasonication, which achieved 95.6% of recovery efficiency. The recycled Fe3O4-PP showed high stabilities in surface properties, maintaining more than 87.5% of harvesting efficiency after five recycles.

Charge-tunable polymers as reversible and recyclable flocculants for the dewatering of microalgae.

Microalgae-derived biofuels have potential advantages over other renewable, crop-based resources; however, large-scale production is not currently economical due, in part, to challenges in the harvesting step. In this article, we present a novel approach for the dewatering and harvesting of microalgae using flocculants that can be recovered and recycled. Polyampholytes with molecular charges dependent upon pH (ranging from net positively- to net negatively-charged) are used as a model flocculant system and provide reversible electrostatic interactions with the negatively-charged algal cells. These pH-dependent properties allow the polyampholytic flocculants to efficiently desorb from concentrated biomass and, unlike most commercial flocculants that have permanently charged functionalities, be recovered and recycled for further dewatering processes. The behavior of the model polyampholytic flocculants is characterized for the dewatering of Chlorella vulgaris (UTEX 395). The reversible and recyclable flocculants achieve >99% flocculation efficiencies, are recovered at more than 98 wt% yields after biomass dewatering, and can be recycled over five times for flocculation.

Impact of excipients in the chronic toxicity of fluoxetine on the alga Chlorella vulgaris.

Fluoxetine is a selective serotonin reuptake inhibitor (SSRI) widely used in the treatment of major depression. It has been detected in surface and wastewaters, being able to negatively affect aquatic organisms. Most of the ecotoxicity studies focused only in pharmaceuticals, though excipients can also pose a risk to non-target organisms. In this work the ecotoxicity of five medicines (three generic formulations and two brand labels) containing the same active substance (fluoxetine hydrochloride) was tested on the alga Chlorella vulgaris, in order to evaluate if excipients can influence their ecotoxicity. Effective concentrations that cause 50% of inhibition (EC50) ranging from 0.25 to 15 mg L⁻¹ were obtained in the growth inhibition test performed for the different medicines. The corresponding values for fluoxetine concentration are 10 times lower. Higher EC50 values had been published for the same alga considering only the toxicity of fluoxetine. Therefore, this increase in toxicity may be attributed to the presence of excipients. Thus more studies on ecotoxicological effects of excipients are required in order to assess the environmental risk they may pose to aquatic organisms.

From raw microalgae to bioplastics: Conversion of Chlorella vulgaris starch granules into thermoplastic starch.

Microalgae are emerging as a promising feedstock for bioplastics, with Chlorella vulgaris yielding significant amounts of starch. This polysaccharide is convertible into thermoplastic starch (TPS), a biodegradable plastic of industrial relevance. In this study, we developed a pilot-scale protocol for extracting and purifying starch from 430 g (dry weight - DW) of starch-enriched Chlorella vulgaris biomass. More than 200 gDW of starch were recovered, with an extraction yield and starch purity degree reaching 98 and 87 %, respectively. We have characterized this extracted starch and processed it into TPS using twin-screw extrusion and injection molding. Microalgal starch showed similar properties to those of native plant starch, but with smaller granules. We compared the mechanical properties of microalgal TPS with two controls, namely a commercial TPS and a TPS prepared from commercial potato starch granules. TPS prepared from microalgal starch showed a softer and more ductile behavior compared to the reference materials. This study demonstrates the feasibility of recovering high-purity microalgal starch at pilot scale with high yields, and highlights the potential of microalgal starch for the production of TPS using industrially relevant processes.

Polyethylene terephthalate nanoparticles induce oxidative damage in Chlorella vulgaris.

Polyethylene Terephthalate (PET) is a type of plastic largely used for packing food and beverages. Unfortunately, it includes a major portion of the plastic distributed through aquatic systems wherever systematic collection and recycling are lacking. Although PET is known to be non-toxic, it is not obvious whether the nanoparticles (NPs) formed due to their degradation have any direct/indirect effect on aquatic organisms. In order to study the effects on aquatic environment, fresh water algae Chlorella vulgaris was subjected to incremental concentrations of the NPs. We observed a concentration and duration of exposure dependent decrease in algal growth rate along with reduced total chlorophyll content. Scanning electron microscopy revealed deformities in cell shape and the uptake of Propidium Iodide suggested membrane damage in response to NP exposure. Intracellular Reactive Oxygen Species level was also found significantly higher, evidenced by Dichlorodihydrofluorescein diacetate staining. Activity of antioxidant enzymes Superoxide dismutase (SOD), Peroxidase (POD) and Catalase (CAT) were significantly higher in the NP exposed groups suggesting the cellular response to regain homeostasis. Further, expression levels of the genes psaB, psbC, and rbcL associated with photosynthesis increased above two fold with respect to the control inferring the possibility of damage to photosynthesis and the initial molecular responses to circumvent the situation. In short, our studies provide evidence for oxidative stress mediated cellular damages in Chlorella vulgaris exposed to NPs of PET.

Combined toxic effects of polystyrene nanoplastics and lead on Chlorella vulgaris growth, membrane lipid peroxidation, antioxidant capacity, and morphological alterations.

In recent years, there has been a significant rise in the utilization of amino-functionalized polystyrene nanoplastics (PS-NH2). This surge in usage can be attributed to their exceptional characteristics, including a substantial specific surface area, high energy, and strong reactivity. These properties make them highly suitable for a wide range of industrial and medical applications. Nevertheless, there is a growing apprehension regarding their potential toxicity to aquatic organisms, particularly when considering the potential impact of heavy metals like lead (Pb) on the toxicity of PS-NH2. Herein, we examined the toxic effects of sole PS-NH2 (90 nm) at five concentrations (e.g., 0, 0.125, 0.25, 0.5, and 1 mg/L), as well as the simultaneous exposure of PS-NH2 and Pb2+ (using two environmental concentrations, e.g., 20 µg/L for Pb low (PbL) and 80 µg/L for Pb higher (PbH)) to the microalga Chlorella vulgaris. After a 96-h exposure, significant differences in chlorophyll a content and algal growth (biomass) were observed between the control group and other treatments (ANOVA, p < 0.05). The algae exposed to PS-NH2, PS-NH2 + PbL, and PS-NH2 + PbH treatment groups exhibited dose-dependent toxicity responses to chlorophyll a content and biomass. According to the Abbott toxicity model, the combined toxicity of treatment groups of PS-NH2 and PbL,H showed synergistic effects. The largest morphological changes such as C. vulgaris' size reduction and cellular aggregation were evident in the medium treated with elevated concentrations of both PS-NH2 and Pb2+. The toxicity of the treatment groups followed the sequence PS-NH2 < PS-NH2 + PbL < PS-NH2 + PbH. These results contribute novel insights into co-exposure toxicity to PS-NH2 and Pb2+ in algae communities.

The Biophysical Properties of Microalgal Cell Surfaces Govern Their Interactions with an Amphiphilic Chitosan Derivative Used for Flocculation and Flotation.

Microalgae show great promise for producing valuable molecules like biofuels, but their large-scale production faces challenges, with harvesting being particularly expensive due to their low concentration in water, necessitating extensive treatment. While methods such as centrifugation and filtration have been proposed, their efficiency and cost-effectiveness are limited. Flotation, involving air-bubbles lifting microalgae to the surface, offers a viable alternative, yet the repulsive interaction between bubbles and cells can hinder its effectiveness. Previous research from our group proposed using an amphiphilic chitosan derivative, polyoctyl chitosan (PO-chitosan), to functionalize bubbles used in dissolved air flotation (DAF). Molecular-scale studies performed using atomic force microscopy (AFM) revealed that PO-chitosan's efficiency correlates with cell surface properties, particularly hydrophobic ones, raising the question of whether this molecule can in fact be used more generally to harvest different microalgae. Evaluating this, we used a different strain of Chlorella vulgaris and first characterized its surface properties using AFM. Results showed that cells were hydrophilic but could still interact with PO-chitosan on bubble surfaces through a different mechanism based on specific interactions. Although force levels were low, flotation resulted in 84% separation, which could be explained by the presence of AOM (algal organic matter) that also interacts with functionalized bubbles, enhancing the overall separation. Finally, flocculation was also shown to be efficient and pH-independent, demonstrating the potential of PO-chitosan for harvesting microalgae with different cell surface properties and thus for further sustainable large-scale applications.

Effects of polystyrene nanoplastics and PCB-44 exposure on growth and physiological biochemistry of Chlorella vulgaris.

Both NPs and PCBs are emerging contaminants widely distributed in the environment, and it is worth exploring whether the combination of the two contaminants causes serious pollution and harm. Therefore, we studied the effects of PS-NPs and PCB-44 alone and together after 96 h and 21 d of exposure to C. pyrenoidosa. The results showed that PS-NPs and PCB-44 affected the cell cycle of C. pyrenoidosa and inhibited its normal growth. Under PS-NPs and PCB-44 stress, the relative conductivity of the algal solution increased, the hydrophobicity of the algal cell surface decreased, and the synthesis of chlorophyll a and chlorophyll b was reduced. In addition to physiological, there are biochemical effects on C. pyrenoidosa. PS-NPs and PCB-44 exposure induced oxidative stress with significant changes in the enzymatic activities of SOD and CAT together with MDA content. Moreover, the relative expression of photosynthesis-related genes (psbA, rbcL, rbcS) all responded, negatively affecting photosynthesis. In particular, significant toxic effects were observed with single exposure to PCB-44 and co-exposure to PS-NPs and PCB-44, with similar trends of effects in acute and chronic experiments. Taken together, exposure to PS-NPs and PCB-44 caused negative effects on the growth and physiological biochemistry of C. pyrenoidosa. These results provide scientific information to further explore the effects of NPs and PCBs on aquatic organisms and ecosystems.

Granulated rubber in playgrounds and sports fields: A potential source of atmospheric plastic-related contaminants and plastic additives after runoff events.

The use of "crumb rubber" coming from recycling materials in outdoor floors like playgrounds has been a frequent practice during the last years. However, these surfaces are object of abrasion and weathering being a potential source of micro and nanoplastics (MNPLs) to the atmosphere and a potential source of human exposure to them. Our main goal has been to expose different crumb rubber materials to summer weathering effects. The released inhalable fractions were sampled for two months with passive samplers and the composition of MNPLs and plastic additives (organic and inorganic) were evaluated. The ecotoxicological effects of leached materials emulating runoff events was evaluated in freshwater micro crustacean Daphnia magna and the green algae Chlorella vulgaris. The analysis of MNPLs showed the presence of polyethylene, polypropylene, polybutadiene, polysiloxanes and polybutylene at concentrations up to 30,426 ng/m3. In the same fraction, we also identified up to 56 plastic additives, including antioxidants, pigments, copolymers, flame retardants, fungicides, lubricants, plasticizers, UV filters and metal ions. Finally, runoff ecotoxicological effects on D. magna and C. vulgaris showed that leached compounds, either from virgin or aged material, would be toxicants for exposed organisms although at concentrations much higher than those expected to be released to the media.

Microplastics leachate may play a more important role than microplastics in inhibiting microalga Chlorella vulgaris growth at cellular and molecular levels.

The leaching of microplastics (MPs) additives and their negative effects on aquatic organisms remain to be systematically elucidated. In this study, the toxicological effects of MPs leachate (micro-sized polyethylene (mPE) and micro-sized polyvinyl chloride (mPVC) acceleratedly leached by UVA for 15, 90, and 180 days in seawater) on microalga Chlorella vulgaris in terms of cell growth inhibition, oxidative stress, and transcriptomes were investigated. The leachate components of MPs aged for 90 days were further identified to elucidate the corresponding toxicity mechanisms of MPs on microalgal cells. The results revealed that both leachates of mPE and mPVC inhibited cell growth and increased oxidative stress in C. vulgaris, accompanied by a growth inhibition rate to microalgal cells of 4.0%-36.2% and 7.1%-48.2%, respectively. At the same mass concentration, the toxicological effects on C. vulgaris followed the order of mPVC leachate > mPE > mPE leachate > mPVC, whereas MPs leaching time indicated no change in MPs leaching toxicity. Furthermore, the gene functions of "translation, ribosomal structure and biogenesis" were mostly affected by MPs leachate. Compared to mPE leachate and pure MPs, the stronger inhibitory effects of mPVC leachate on microalgal cells may be attributed to the fact that more substances were leached from the polymer of mPVC, including Zn, farnesol isomer a, 2,6-di-tert-butyl-4-methylphenol, and acetyl castor oil methyl ester. In summary, this study provides a better understanding of the ecotoxicological influences of MPs and MPs leachate, and offers a warning on the ecological risk caused by plastic additives.

Impacts of microplastic-petroleum pollution on nutrient uptake, growth, and antioxidative activity of Chlorella vulgaris.

As one of the emerging pollutants, microplastics (MPs; <5 mm) can interact with co-contaminants such as petroleum in marine aquatic systems, and their combined toxicity has not been fully investigated. Therefore, this study focused on pollutants such as micro-sized polyethylene (mPE) and petroleum, aiming to explore their single and combined toxicities to microalga Chlorella vulgaris in terms of the cell growth, antioxidative enzymes, and nutrients utilization. The results showed that the MPs alone (particle sizes (i.e., 13, 165, 550 µm), concentrations (i.e., 0.01, 0.1, and 1 g/L), and aging degrees (i.e., aged for 0 d and 90 d under UVA)), and petroleum alone (5% water accommodated fraction, WAF), and their combinations (i.e., 5% WAF + 165 µm-0.1 g/L-aged 0 d mPE, 5% WAF + 165 µm-0.1 g/L-aged 90 d mPE) all posed toxicities risk to C. vulgaris, following an increase in oxidative stress. The cellular utilization of elements such as Fe, Si, Ca, and Mg was inhibited, whereas the uptake of Mn, NO3--N, and PO43--P increased as compared to the control experiments. Furthermore, the relationship between nutrients and growth indicators was analyzed using a structural equation model. The results indicated that Fe and Mn directly affected the indirect NO3--N absorption by C. vulgaris, which indirectly affected the dry cell weight (DCW) of the microalgae. The path coefficient of Fe and Mn affecting nitrate was 0.399 and 0.388, respectively. The absorption of N was the key step for C. vulgaris resist stress. This study provides a novel analysis of the effects of MPs on the growth of microalgae from the perspective of nutrient elements, thereby providing a useful basis for further exploration of the associated mechanisms.

Distinct responses of Chlorella vulgaris upon combined exposure to microplastics and bivalent zinc.

Microplastics (MPs) and heavy metals are ubiquitous pollutants in the aquatic environment. In this study, the sorption behavior of two typical MPs (PVC and PE) to bivalent zinc ions (Zn(II)) and their combined toxic effects on Chlorella vulgaris were systemically studied. The growth inhibition rate, the activities of photosynthesis and antioxidant enzymes (SOD and CAT), the cell membrane integrity and the cell apoptosis rate were employed to evaluate the toxicity. Our result showed that PVC and PE have different adsorption capacities for Zn(II), and the combined exposure to Zn(II) and MPs had distinct patterns on the inhibition of the cell growth and induction of oxidative stress. Under our experimental concentrations, PE and Zn(II) showed a synergistic effect, while PVC and Zn(II) exhibited an antagonistic effect. Finally, an action mechanism was proposed to explain the experimental phenomena. This study demonstrated that flow cytometry can be a powerful tool to study the toxic effect of MP composites, and MPs can not only allow a free ride for the water contaminants, but also remarkably alter their toxic effects on phytoplankton. These effects deserve further consideration during evaluation of ecological risks of MPs in the water environment.

Synergistic outcomes of Chlorella-bacterial cellulose based hydrogel as an ethylene scavenger.

Increasing the freshness of vegetables requires the elimination of ethylene, which can be done through chemical methods. However, the development of eco-friendly approaches is required for environmental reasons. Chlorella vulgaris (C. vulgaris) was selected as a new biological material for demonstrating an excellent performance in ethylene removal. To support C. vulgaris, bacterial cellulose (BC) produced by Gluconacetobacter hansenii (G. hansenii) was chosen due to its high water content and biodegradability. To increase BC productivity, UV-induced mutant G. hansenii was isolated, and they produced high yields of BC (9.80 ±â€¯0.52 g/L). Furthermore, comparative transcriptome analysis revealed metabolic flux changes toward UDP-glucose accumulation and enhanced BC production. BC-based hydrogels (BC hydrogels) were successfully prepared using a 2.4 % carboxymethyl cellulose (CMC) and 1 % agar mixture. We used Chlorella-BC hydrogels as an ethylene scavenger, which reduced 90 % of ethylene even when the immobilized C. vulgaris was preserved for 14 days at room temperature without media supplementation. We demonstrated for the first time the potential of BC hydrogels to integrate C. vulgaris as a sustainable ethylene absorber for green food packaging and biomass technology.