Evaluation of minimally invasive esthetic crown lengthening using an open flap versus flapless surgical approach: A randomized controlled clinical trial.

OBJECTIVES: Esthetic crown lengthening (ECL) is commonly advocated to treat patients with altered passive eruption (APE). Since the introduction of the minimally invasive surgical concept, a limited number of studies have investigated this technique in a standardized manner, with further studies required to verify the validity and predictability of the minimally invasive FL-technique. The current randomized trial compares a minimally invasive (ECL), using piezosurgery with flapless-approach (FL), versus an open-flap (OF) approach in the management of patients with APE Type 1B. MATERIALS AND METHODS: Twenty-four patients diagnosed with APE Type 1B were randomly assigned into test (FL) with tunneling approach or control (OF) group with minimally invasive flap reflection (n = 12/group). Postoperative pain was assessed during the first 48 h. Gingival margin (GM) level relative to a custom-made stent (rGM) and patient satisfaction were assessed preoperative, immediately after surgery, at 3 and 6 months postsurgically. Postoperative swelling was reported for the first week postsurgically. Plaque index (PI), bleeding on probing (BoP), clinical attachment level (CAL), pocket depth (PD) and pink esthetic score (PES), were evaluated at baseline and 6 months. Linear regression analysis was conducted for pain. RESULTS: OF-group reported significantly higher pain and swelling scores than FL-group during the first 48 h (p < 0.05). FL-group showed no significant differences regarding rGM between 3 and 6 months, in contrast to OF-group, where a significant decrease in rGM was notable (p < 0.05). No significant differences in PI, BoP, CAL, PD, PES, and patient satisfaction scores were evident between groups (p > 0.05). Regression analysis demonstrated that treatment and gender were significant predictors for pain (p < 0.05). CONCLUSIONS: Within the current study's limitations, piezo-surgical ECL with FL-approach presented significantly lower postoperative pain, swelling, and early GM stability compared to OF-approach. CLINICAL SIGNIFICANCE: Piezosurgical ECL with a FL-approach can be considered a predictable technique with advantages over the OF-approach in the management of patients with APE Type1B.

Enhancing precision and safety in dental surgery - the advantages of piezosurgery.

Piezosurgery in dentistry is an innovative surgical technique utilizing ultrasonic vibrations to precisely cut bone tissue while minimizing damage to surrounding soft tissues. This method is particularly advantageous for delicate procedures in oral and maxillofacial surgery, including bone graft harvesting, sinus lifts, and tooth extractions. Piezosurgery operates on the principle of piezoelectricity, discovered by Jacques and Pierre Curie in the 19th century, where a piezoelectric crystal converts oscillating electric fields into mechanical vibrations. Devices used in piezosurgery generate ultrasonic frequencies (25-30 kHz) that enable linear vibrations and controlled cutting, selective for mineralized tissues.The technology offers significant benefits over conventional surgical methods, including improved visibility, precise and smooth cuts, and a reduced risk of soft tissue damage. Clinical applications of piezosurgery demonstrate its effectiveness in preserving vital cells such as osteoblasts and osteocytes, promoting faster healing, and better osseointegration of implants. Specialized inserts and operating modes enhance its versatility for various surgical needs. Piezosurgery has shown to lower postoperative complications and enhance patient safety in complex procedures like sinus lifts and bone splitting. This advanced surgical technique represents a significant improvement in dental and oral surgery, offering enhanced precision, safety, and clinical outcomes, ultimately improving the standard of care and patient satisfaction.

Conventional drilling versus ultrasound and laser osteotomy in mandibular third molar surgery: A comparative study.

BACKGROUND: There are few research works with in-depth studies and direct simultaneous comparisons of the effects on tissue reactions and patients' recovery following in vivo conventional drilling, ultrasound- and laser-assisted osteotomy in humans. OBJECTIVE: The current study aims to compare bone cutting duration, pain, swelling, and trismus in patients following surgical mandible third molar extraction by bone removal using three different osteotomes-a conventional rotary device, an ultrasonic unit, and an Er:YAG laser. METHODS: A prospective, randomized three-group comparative clinical trial was performed. As an experimental setting for the study, аn open mandible third molar surgery was chosen because osteotomy is included in its protocol. Patients were divided into three groups according to the used device for bone removal. Bone cutting time intraoperatively, facial swelling, trismus, and pain on the first, second, and third postoperative days were assessed. The statistical analyses were performed using the SPSS v. 17.0-Kolmogorov-Smirnov test, one-way ANOVA, Student's t-test, Mann-Whitney test, and χ2  test. Statistical results were considered significant at p < 0.05 (confidence interval of difference, 95% CI). RESULTS: Eighty patients (34 males and 46 females with an average age of 25.18 years) were included in the study. The average time for bone removal by the conventional low-speed device (4.95 min), by the ultrasonic unit (5.13 min), and by the Er:YAG laser (9.00 min) differed significantly (p = 0.001). The mean postoperative facial swelling showed a marked difference between the groups (p < 0.05), in favor of the laser and piezo groups. The osteotome proved to influence pain intensity not only immediately after surgery (p = 0.002), but also during the followed-up period (p = 0.001), again in favor of the two above-mentioned groups. No association was found between trismus and the osteotome used by the followed-up patients (p > 0.05). CONCLUSION: Bone-cutting mechanism and the biological influence of the laser beam and ultrasound on living tissues proved to be favorable factors for patients' pain levels and tissue swelling postoperatively independent of the longer osteotomy duration compared to conventional drilling.

Piezosurgery versus conventional osteotomy: a randomized clinical trial on pain and anxiety in children with unerupted mandibular third molars.

OBJECTIVE: Dental anxiety for unerupted mandibular third molars extraction in children under local anesthesia is a tricky problem. The purpose of this study was to compare psychological and physiologic findings of extractions of unerupted mandibular third molars in children by piezosurgery and conventional osteotomy. MATERIALS AND METHODS: This prospective, single-center, double-blind study included children who required extraction of mandibular third molars under local anesthesia. All subjects were randomly divided into two groups: piezosurgery and conventional osteotomy (control). The primary outcome variables were dental anxiety assessed by the Modified Child Fear Survey Schedule Dental Subscale (CFSS-DS) and postoperative pain qualified by the visual analog scale (VAS). Secondary outcome variables included blood pressure, heart rate, saturation, and operation duration. The data were analyzed by t-test and chi-square test (P ≤ 0.05). RESULTS: All 40 study patients (37.5% males and 62.5% females with an average age of 14.43 ± 1.32 years) completed the entire trial. There were no statistically significant differences observed between the two groups in terms of gender allocation, age, side of extraction, and Winter's Classification (P > 0.05). The operation duration of the piezosurgery group was significantly longer than the conventional osteotomy group (P < 0.01). The VAS scores showed that pain levels of children in the piezosurgery group were significantly less than the conventional osteotomy group on the first and third days postoperatively (P < 0.05 and P < 0.01, respectively). The CFSS-DS score in the piezosurgery group significantly decreased compared to the conventional osteotomy group (P < 0.05). Compared with the conventional osteotomy group, a significant decrease in heart rate, and lower systolic and diastolic blood pressures were observed after extraction in the piezosurgery group (P < 0.05 and P < 0.01, respectively). CONCLUSION: Compared with conventional osteotomy, piezosurgery can effectively reduce postoperative pain and have some effect in relieving dental anxiety for the extraction of unerupted mandibular third molars in children. CLINICAL RELEVANCE: Piezosurgery may be a viable technique for the extraction of unerupted mandibular third molars in children under local anesthesia.

A clinical study of the piezosurgery, high-speed contra-angle handpiece, and the combined application of both for extraction of embedded supernumerary teeth.

OBJECTIVES: To compare the effectiveness of three methods: high-speed contra-angle handpiece (HSCAH), piezosurgery, and combined in the extraction of different locations and types of embedded supernumerary teeth. METHODS: Sixty cases with different locations and different types of embedded supernumerary teeth were randomly divided into three groups for extraction by HSCAH, piezosurgery, and the combination of both, and the intraoperative and postoperative conditions of the three groups were compared and analyzed. RESULTS: In the extraction of embedded supernumerary teeth in the inverted, horizontal, and root tip positions, the piezosurgery group required significantly longer operative time and reduced intraoperative bleeding compared with the HSCAH and the piezosurgery combined with the HSCAH; it could effectively relieve postoperative pain and facial swelling. In the extraction of oblique, orthodontic, middle, and crown segments of embedded supernumerary teeth, the use of a piezosurgery combined with an HSCAH can effectively reduce the operative time, while the factors of bleeding, postoperative pain, and facial swelling not statistically significant when compared with a piezosurgery. Compared with the HSCAH and combined piezosurgery, piezosurgery can significantly reduce the fear of patients. CONCLUSION: Piezosurgery is effective in extracting embedded supernumerary teeth in inverted, horizontal, and apical positions, effectively reducing intraoperative and postoperative trauma and shortening the time required for healing. The piezosurgery combined with an HSCAH can effectively reduce intraoperative and postoperative trauma when extracting embedded supernumerary teeth in oblique, orthodontic, middle, and crown positions. piezosurgery is a technique suitable for the treatment of patients with fear.

A randomized controlled trial comparing conventional and piezosurgery methods in mandibular bone block harvesting from the retromolar region.

BACKGROUND: Although piezosurgery is now commonly used for various applications in maxillofacial surgery, its advantages over conventional rotary instruments in terms of postoperative edema, ecchymosis, postoperative morbidity, and prolonged osteotomy time have been questioned. MATERIALS AND METHODS: This study aimed to compare the efficiency, postoperative morbidity, and complication rates of piezosurgery and conventional methods in harvesting autogenous ramus grafts. In this randomized controlled trial, 21 patients (32 sides) underwent autogenous graft harvesting from the ramus area, with 16 sites treated using piezosurgery and 16 using the conventional method. The primary outcomes measured were osteotomy time, total operation time, and postoperative morbidity. Complication rates were also evaluated. RESULTS: The final analysis encompassed 19 patients, accounting for a total of 30 donor sites, following the exclusion of two patients who were unable to attend the scheduled follow-up visits. A total of 19 patients (30 donor sites) were included in the final analysis. No statistically significant difference was found in the mean osteotomy time between the piezosurgery group (mean: 10.35, SD: 2.74 min) and the conventional group (mean: 8.74, SD: 2.74 min) (95% CI: -3.67 to 0.442, p = 0.119). The total operation time, postoperative pain, and swelling were not significantly different between the two groups (p > 0.05). The complication rates, including wound dehiscence and inferior alveolar nerve exposure, were similar in both groups. CONCLUSIONS: Piezosurgery can be safely used for harvesting autogenous ramus grafts and does not increase osteotomy or total operation time compared to the conventional method. The postoperative morbidity and complication rates were also similar, indicating that both techniques can be effectively employed in clinical practice. CLINICAL TRIAL REGISTRATION: The protocol was registered on clinicaltrials.gov (ID: NCT05548049, First registration date: 21/09/2022).

Influence of buccal and palatal bone thickness on post-surgical marginal bone changes around implants placed in posterior maxilla: a multi-centre prospective study.

BACKGROUND: Numerous clinical variables may influence early marginal bone loss (EMBL), including surgical, prosthetic and host-related factors. Among them, bone crest width plays a crucial role: an adequate peri-implant bone envelope has a protective effect against the influence of the aforementioned factors on marginal bone stability. The aim of the present study was to investigate the influence of buccal and palatal bone thickness at the time of implant placement on EMBL during the submerged healing period. METHODS: Patients presenting a single edentulism in the upper premolar area and requiring implant-supported rehabilitation were enrolled following inclusion and exclusion criteria. Internal connection implants (Twinfit, Dentaurum, Ispringen, Germany) were inserted after piezoelectric implant site preparation. Mid-facial and mid-palatal thickness and height of the peri-implant bone were measured immediately after implant placement (T0) with a periodontal probe and recorded to the nearest 0.5 mm. After 3 months of submerged healing (T1), implants were uncovered and measurements were repeated with the same protocol. Kruskal-Wallis test for independent samples was used to compare bone changes from T0 to T1. Multivariate linear regression models were built to assess the influence of different variables on buccal and palatal EMBL. RESULTS: Ninety patients (50 females, 40 males, mean age 42.9 ± 15.1 years), treated with the insertion of 90 implants in maxillary premolar area, were included in the final analysis. Mean buccal and palatal bone thickness at T0 were 2.42 ± 0.64 mm and 1.31 ± 0.38 mm, respectively. Mean buccal and palatal bone thickness at T1 were 1.92 ± 0.71 mm and 0.87 ± 0.49 mm, respectively. Changes in both buccal and palatal thickness from T0 to T1 resulted statistically significant (p = 0.000). Changes in vertical bone levels from T0 to T1 resulted not significant both on buccal (mean vertical resorption 0.04 ± 0.14 mm; p = 0.479) and palatal side (mean vertical resorption 0.03 ± 0.11 mm; p = 0.737). Multivariate linear regression analysis showed a significant negative correlation between vertical bone resorption and bone thickness at T0 on both buccal and palatal side. CONCLUSION: The present findings suggest that a bone envelope > 2 mm on the buccal side and > 1 mm on the palatal side may effectively prevent peri-implant vertical bone resorption following surgical trauma. TRIAL REGISTRATION: The present study was retrospectively recorded in a public register of clinical trials ( www. CLINICALTRIALS: gov - NCT05632172) on 30/11/2022.

Three-dimensional facial swelling evaluation of piezo-electric vs conventional drilling bur surgery of impacted lower third molar: a randomized clinical trial.

BACKGROUND: Among the post-surgical complications of lower wisdom teeth surgery, swelling is considered by patients one of the most impairing, with both social and biological influences and impacting patients' quality of life. Aim of the study was to evaluate the swelling following the osteotomy when performed with drilling burs versus piezo-electric instruments in the mandibular impacted third molar extraction, using a facial reconstruction software. MATERIALS AND METHODS: A randomized, split-mouth, single-blind study was conducted on patients, ranging between 18 and 40 years of age, requiring lower third molars extraction and referred at the Oral Surgery Unit of the School of Dentistry of the University of Messina. Twenty-two patients were recruited during an 8 months period according to the following criteria: good general health conditions; bilateral, symmetrical, impacted third molars; no use of medication that would influence or alter wound healing; no temporomandibular joint disorder history; no smoking. All patients underwent bilateral surgical removal. For each patient, a facial scan was obtained prior to the surgical procedures. The two extractions were conducted performing, in a randomized way, osteotomy with rotatory burs or use of piezo surgical instruments. Facial scans were repeated at 3 and 7 days after the surgical procedures. Volumetric differences were calculated via superimposition using a dedicated software. The data obtained were processed using paired t-test. RESULTS: The results obtained from our study showed no significant differences between two groups regarding post-operative swelling. To the best of our knowledge, this study represents the first experience of using an objective method that can be reproducible on the collection of patients' clinical parameters. CONCLUSIONS: The 3D digital analysis, in the evaluation of facial swelling, is a technique of simple application, objective, reproducible, reliable, decreasing the variables of error. Based on these data, it is possible to conclude that piezo surgery is a safe way for performing the osteotomies during third molar surgery. However, regarding the post-operative swelling, it does not show an advantage over classical rotary instruments. TRIAL REGISTRATION: Registered on ClinicalTrials.gov (ID: NCT05488028, on 04/08/2022). Approved by Ethical Committee of Messina: (ID 01-2020, on 27/04/2020).

Comparative Efficacy of Traditional Corticotomy and Flapless Piezotomy in Facilitating Orthodontic Tooth Movement: A Systematic Review and Meta-Analysis.

Background and Objectives: This study aimed to perform a meta-analysis comparing the effects of corticotomy and flapless piezocision on accelerated tooth movement. Materials and Methods: A comprehensive search using a combination of controlled vocabulary (MeSH) and free-text terms was undertaken by two reviewers to identify published systematic reviews. Three major electronic databases (Medline via PubMed, Cochrane Database, and Embase) were searched up to 2 June 2023. Results: The results of the meta-analysis showed that the pooled standardized mean difference values of accumulative movement distances for flapless piezocision were 1.43 (95% CI, 0.38 to 2.48; p < 0.01), 1.09 (95% CI, -0.08 to 2.26; p = 0.07), and 0.73 (95% CI, -0.58 to 4.02; p = 0.14). The results of the meta-analysis demonstrated that the pooled SMD values of accumulative movement distances for the corticotomy were 2.76 (95% CI, 0.18 to 5.34; p = 0.04), 1.43 (95% CI, -1.10 to 3.96; p = 0.27), and 4.78 (95% CI, -4.54 to 14.10; p = 0.32). Although the test for overall effectiveness was significant for piezocision and corticotomy, there were no significant differences between piezocision and corticotomy. Conclusions: The study determined that both conventional corticotomy and flapless piezosurgery are effective as adjuncts to orthodontic treatment. Moreover, no significant difference was observed in the short-term effectiveness of canine retraction acceleration between conventional corticotomy and flapless piezocision. While piezocision may be a favorable option for orthodontic treatment, corticotomy can be considered in cases requiring additional procedures such as bone grafting.

Full-Mouth Rehabilitation of a Patient with Gummy Smile-Multidisciplinary Approach: Case Report.

The impairment of aesthetic function leads to a decreased quality of life. An unaesthetic smile due to excessive gingival exposure demands, most of the time, a complex treatment in which the objective is the vertical reduction of the amount of exposed fixed gingiva by obtaining a complete exposure of the anatomical crown of the teeth and restoring the ideal dimensions of the biological width. This paper presents a case of a 48-year-old female patient who was unsatisfied with her aesthetics and had disturbed masticatory function due to the absence of some posterior teeth. The cone beam computed tomography was performed to evaluate the facial and dental morphology. The treatment plan included diode laser and piezo-surgery utilization for the frontal area of the upper arch and implants to restore the distal area of the lower and upper arch. Zirconia ceramic was used for the final restorations. This complex and multidisciplinary full-mouth rehabilitation lasted for two years, and the patient was pleased with the result. This case showed that a well-established treatment plan is necessary to obtain long-lasting results. The use of adequate procedures and equipment ensures a predictable result.

Comparison of the effects of two extraction methods on the alveolar ridge preservation of Maxillary Anterior Teeth.

Objective: To compare the effects of high-speed turbodrill root extraction and piezosurgery tooth socket enlargement on the alveolar ridge preservation of maxillary anterior teeth. Methods: Thirty-six clinically eligible patients admitted to the No.2 Hospital of Baoding or the Baoding First Central Hospital from January 2018 to November 2019 were selected and randomly divided into two groups. Group-A were extracted by high-speed turbodrill root extraction, while Group-B were extracted by piezosurgery tooth socket enlargement. After extraction, GBR bone grafting and soft tissue transplantation were performed on the extraction sockets. The extraction time, integrity rate of labial bone plate of the extraction socket, pain-free rate, satisfaction rate, reduction of the height and width of the alveolar ridge, alveolar bone mineral density score, and new bone contour score of the alveolar bone of two groups were compared. Result: Group-B was significantly superior to Group-A in terms of tooth extraction time, pain-free rate, satisfaction rate and reduction of alveolar ridge height at three sites on the palatal side, with a statistically significant difference (p<0.05). Conclusions: Piezosurgery tooth socket enlargement is more worthy of clinical application due to its advantages of less impact on the preservation of the palatal alveolar ridge height of the maxillary anterior teeth, shorter tooth extraction time, postoperative pain-free rate and high final satisfaction rate.

Droplet size distribution, atomization mechanism and dynamics of dental aerosols.

Since the outbreak of COVID-19 pandemic, maintaining safety in dental operations has challenged health care providers and policy makers. Studies on dental aerosols often focus on bacterial viability or particle size measurements inside dental offices during and after dental procedures, which limits their conclusions to specific cases. Fundamental understanding on atomization mechanism and dynamics of dental aerosols are needed while assessing the risks. Most dental instruments feature a build-in atomizer. Dental aerosols that are produced by ultrasonic or rotary atomization are considered to pose the highest risks. In this work, we aimed to characterize dental aerosols produced by both methods, namely by Mectron PIEZOSURGERY® and KaVo EXPERTtorque™. Droplet size distributions and velocities were measured with a high-speed camera and a rail system. By fitting the data to probability density distributions and using empirical equations to predict droplet sizes, we were able to postulate the main factors that determine droplet sizes. Both dental instruments had wide size distributions including small droplets. Droplet size distribution changed based on operational parameters such as liquid flow rate or air pressure. With a larger fraction of small droplets, rotary atomization poses a higher risk. With the measured velocities reaching up to 5 m s-1, droplets can easily reach the dentist in a few seconds. Small droplets can evaporate completely before reaching the ground and can be suspended in the air for a long time. We suggest that relative humidity in dental offices are adjusted to 50% to prevent fast evaporation while maintaining comfort in the office. This can reduce the risk of disease transmission among patients. We recommend that dentists wear a face shield and N95/FFP2/KN95 masks instead of surgical masks. We believe that this work gives health-care professionals, policy makers and engineers who design dental instruments insights into a safer dental practice.

Evaluation of implant site preparation with piezosurgery versus conventional drills in terms of operation time, implant stability and bone density (randomized controlled clinical trial- split mouth design).

BACKGROUND: The preparation of the implant bed has a major influence on the success rate and long-term survival of dental implants. Piezoelectric devices and special implant drilling inserts are now emerging to replace conventional drills showing improved bone response and healing around implants. The purpose of this study is to compare the piezoelectric inserts versus the traditional drills for implant site preparation. METHODS: Twelve male patients who received a total of twenty-four dental implants have been selected to participate in this split-mouth clinical trial. Each patient received two implants; one installed after piezosurgery assisted osteotomy, while the contralateral side received the implant with the original drilling protocol. The timing of surgery, implant stability, and bone density around the installed dental implants have been evaluated during a follow-up period extended to 4 months. RESULTS: a significant difference in terms of time of surgery (p < 0.005) and in implant stability at 4 months (p = 0.024) on the study side, while a non-statistical significance in terms of bone density was detected (p = 0.468). CONCLUSION: The piezoelectric implant site drilling protocol seemed to be a reliable and repeatable technique. Despite the limited sample size and lengthier operative time, the piezoelectric inserts enhanced bone quality and implant stability. Clinical trial registration Current Controlled Trials (ClinicalTrials.gov) https://clinicaltrials.gov/ct2/show/NCT05512273 ; the date of registration: 23/08/2022. Retrospectively registered.

Clinical comparison of instrumentation systems for periodontal debridement: A randomized clinical trial.

OBJECTIVE: To compare clinical efficacy, chairside time and post-treatment hypersensitivity of four instruments used for subgingival periodontal debridement. MATERIALS & METHODS: Seventeen patients with stage II and III periodontitis were enrolled in this randomized clinical trial using a split-mouth design. Quadrants were randomly divided into four treatment groups: Group A: Gracey curettes-Hu-Friedy® ; Group B: piezoelectric ultrasonic (Satelec® ) with No.1S insert; Group C: diamond burs 40 µm (Intensiv Perioset® ); and Group D: piezosurgery ultrasonic (Mectron® ) with PP1 insert. Clinical outcomes, chairside time and hypersensitivity were assessed at 1, 2, 4 and 8 weeks after treatment. The primary outcome variable was improvement in clinical attachment level. RESULTS: At 8 weeks post-treatment, Gracey curettes, piezoelectric ultrasonic (Satelec® ) and piezosurgery ultrasonic (Mectron® ) were statistically more effective than diamond burs in increasing attachment level and reducing probing pocket depth. Comparison of piezoelectric ultrasonic (Satelec® ) and piezosurgery ultrasonic (Mectron® ) with the other instruments showed a statistical difference (p < 0.001) in chairside time. Regarding post-treatment hypersensitivity, no statistical differences were observed in any of the groups. CONCLUSIONS: Gracey curettes, piezoelectric ultrasonic (Satelec® ) and piezosurgery ultrasonic (Mectron® ) were clinically more effective than diamond burs 40 µm. The ultrasonic instruments showed a significant reduction in chairside time.

Three-Dimensional evaluation of the effect of platelet-rich fibrin on edema in lower impacted third molar surgery performed with piezosurgery.

Background: Platelet-rich fibrin (PRF) are widely used in impacted lower third molar (IL3M) 7 surgery and its effect on postoperative edema was generally analysed with linear methods. Aim: To analyze the effectiveness of platelet-rich fibrin (PRF) applied to the socket after tooth extraction in impacted lower third molar (IL3M) surgery performed with piezosurgery in the reduction of edema observed in the postoperative period, together with conventional (linear) and three-dimensional (volumetric) measurement methods. Materials and Method: The study was designed as a prospective randomized split-mouth study and was conducted on 30 patients with bilateral IL3M teeth. Extraction of the patients' IL3M teeth was performed in the same session with the help of piezosurgery. After the extraction, PRF was randomly applied to one socket, but it was not applied to the other socket, which formed the control group. On the first, second, and seventh days after the procedure, volume was measured using 3dMD, and the distance between the topographic guide points was measured using a flexible ruler. The results were analyzed statistically. Alveolar osteitis (AO) presence was also recorded. Results: A significant improvement in edema was observed in both groups, but no significant difference was found between the groups (P > 0.05). A moderate correlation was found between the two methods of measuring edema. AO was not seen in any patient. Conclusions: Although PRF reduces edema after IL3M tooth extraction and 3dMD is effective in its evaluation, it has no statistical advantage over classical methods.

Piezo-surgery technique and intramuscular dexamethasone injection to reduce postoperative pain after impacted mandibular third molar surgery: a randomized clinical trial.

BACKGROUND: Surgical extraction of the impacted mandibular third molar is commonly associated with postoperative pain, swelling, and trismus. Usually, rotatory instruments like burs have been used for osteotomy, while Piezosurgery is an innovative technique introduced to overcome the weaknesses related to the conventional technique. In addition, Dexamethasone administration before the extraction of impacted third molars is an efficient way to reduce postoperative pain due to robust anti-inflammatory activity. The purpose of the study is to evaluate the effect of piezo-surgery and dexamethasone injection on postoperative sequelae after the surgical extraction of impacted mandibular third molars, and ultimately to compare their effect on reducing postoperative pain. METHODS: A randomized controlled clinical trial was conducted with a sample of 80 patients. Participants were divided into four groups: Group 1 (Conventional rotatory), Group 2 (Conventional rotatory with 8 mg dose of dexamethasone 30 min before surgery), Group 3 (Piezo-surgery), and Group 4 (Piezo-surgery with 8 mg dose of dexamethasone 30 min before surgery). The outcome variables were surgical working time calculated in minutes, maximal mouth opening measured in millimeters using Vernier Caliper at baseline and day 3 and postoperative pain assessed using a Visual Analog Scale (VAS) on days 1, 3, and 7. RESULTS: The surgical working time was longer in piezo-surgery groups compared with the conventional rotatory instruments groups (15.82 ± 3.47 vs 23.33 ± 2.54; p value < 0.0001). The lowest reduction in mouth opening between baseline and 3rd-day post-op was found in the Piezo-surgery with Dexamethasone group (mean difference = 5.0, SD = 3.9, p value < 0.0001) followed by the Piezosurgery without Dexamethasone group (mean difference = 5.8, SD = 4.5, p value < 0.0001) and the highest average was reported by the Conventional rotatory without Dexamethasone (mean difference = 9.7, SD = 4.5, p value < 0.0001. In the four groups, the mean pain score was highest on the 1st day and gradually decreased over the following days. Comparison of the 1st and 3rd postoperative pain between groups revealed a lowest mean pain score in the Piezo-surgery with Dexamethasone group, followed by Conventional rotatory with Dexamethasone group and a highest mean score in the Conventional rotatory without Dexamethasone group (p value < 0.0001). CONCLUSION: The association of Piezosurgery osteotomy and Dexamethasone intramuscular injection could be an effective combination to reduce postoperative pain and trismus after impacted third molar surgery. TRIAL REGISTRATION: NCT04889781 ( https://clinicaltrials.gov/ ), Date of Registration: 17/05/2021 (retrospectively registered), https://clinicaltrials.gov/ct2/show/NCT04889781?term=NCT04889781&draw=2&rank=1.

Complementarity of Photo-Biomodulation, Surgical Treatment, and Antibiotherapy for Medication-Related Osteonecrosis of the Jaws (MRONJ).

Background and Objectives: Antiresorptive or anti-angiogenic agents may induce medication-related osteonecrosis of the jaws (MRONJ), which represents a challenge for clinicians. The aim of this study is to design and apply a composed and stage-approach therapy combining antibiotherapy, surgical treatment, and photo-biomodulation (PBM) for the prevention or treatment of MRONJ lesions. Materials and Methods: The proposed treatment protocol was carried out in the Department of Oral & Maxillofacial Surgery of the "Victor Babes" University of Medicine and Farmacy of Timisoara, in 2018-2020. A total of 241 patients who were previously exposed to antiresorptive or anti-angiogenic therapy, as well as patients already diagnosed with MRONJ at different stages of the disease were treated. A preventive protocol was applied for patients in an "at risk" stage. Patients in more advanced stages received a complex treatment. Results: The healing proved to be complete, with spontaneous bone coverage in all the n = 84 cases placed in an "at risk" stage. For the n = 49 patients belonging to stage 0, pain reductions and decreases of mucosal inflammations were also obtained in all cases. For the n = 108 patients proposed for surgery (i.e., in stages 1, 2, or 3 of MRONJ), a total healing rate of 91.66% was obtained after the first surgery, while considering the downscaling to stage 1 as a treatment "success", only one "failure" was reported. This brings the overall "success" rate to 96.68% for a complete healing, and to 99.59% when downscaling to stage 1 is included in the healing rate. Conclusions: Therefore, the clinical outcome of the present study indicates that patients with MRONJ in almost all stages of the disease can benefit from such a proposed association of methods, with superior clinical results compared to classical therapies.

Minimal Invasive Flapless Piezotome Alveolar Crest Horizontal Split Technique: Preliminary Results.

INTRODUCTION: Alveolar split crest is an established surgical technique to enable implant insertion into narrow and atrophic alveolar crest. This surgical technique is adopted to position standard or large implants so that postextractive anatomy compromises with this attempt. The aim of this study was to evaluate the horizontal alveolar bone augmentation and its stability along time with a minimally invasive flapless technique. MATERIALS AND METHODS: Twenty-four implants were inserted in 10 patients during a 15-month period. Clinical parameters such as horizontal bone augmentation, intrasurgical complications, patient morbidity, implant loss, and vertical bone loss (VBL) were recorded in the first 3 years after surgery. Using cone-beam computed tomography (CBCT), alveolar bone width was measured for both implants position and bone reconstructions. 6 months later, at the time of implant integration, a new low-dose CBCT was performed. Implant survival (IS) and VBL were evaluated radiographically for 3 years. RESULTS: The initial bone thickness measured on the ridge is between 0.82 mm and 5.40 mm (average 2.43 mm), after the split crest the bone width is between 4.65 mm and 8.09 mm (average 6.39 mm). This leads to an increase in the alveolar bone width of between 0.80 mm and 6.01 mm (average 3.71 mm) on the ridge. No implant was lost at 3 years, and all implants are stable at the end of the study. Three years after the surgery, controls showed a VBL of between 0.0 mm and 1.2 mm (average 0.63 mm) around the inserted implants. These parameters suggest using a flapless technique to reduce bone resorption around the implant neck. CONCLUSION: A minimally invasive approach allows to reduce the surgical trauma and postsurgical discomfort. The complete vascular supply is maintained, the bone resorption is reduced, and the connective epithelium does not undergo postsurgical retraction, achieving the full maintenance of the residual keratinized gingiva. CLINICAL SIGNIFICANCE: A technique such as split crest can be a valid option to avoid autologous or heterologous bone grafts.

[A multidisciplinary approach for accelerated orthodontics]. / Une approche pluridisciplinaire pour l'accélération des traitements en orthodontie.

An increasing number of adult patients are seeking orthodontic treatment and several surgical and non-surgical methods have been developed to reduce the overall treatment time. Two randomized controlled clinical trials, performed in our University Hospital, demonstrated that the piezocision surgery - minimally invasive corticotomies - decreased the overall orthodontic treatment time by 43 % - effect during 4 to 6 months after the surgery - without any further clinical and radiological adverse effects. In addition, the use of a custom-made orthodontic system - brackets and arches - optimized the acceleration in the fine-tuning phase of orthodontic treatment. Finally, the combination of the two techniques is therefore relevant to maximize the reduction of the orthodontic treatment time. Fundamentally, our preclinical studies in rats have highlighted the biological phenomena underlying piezocision with an important bone demineralization and osteoclast recruitment associated with a predominant expression of the RANKL-OPG duo.

La demande des patients adultes pour entreprendre des traitements orthodontiques est en augmentation constante; cependant, la longueur des traitements reste souvent un frein. Dès lors, plusieurs techniques chirurgicales et non chirurgicales ont été mises au point afin de réduire le temps de traitement orthodontique. Deux études cliniques contrôlées randomisées, réalisées au sein de notre hôpital universitaire, ont démontré que la technique de piézocision - corticotomies minimalement invasives - permet de réduire jusqu'à 43 % le temps de traitement orthodontique - au cours des 4 à 6 mois après l'intervention - et ce, sans effets secondaires tant sur le plan clinique que radiologique. De plus, l'utilisation d'un système orthodontique customisé - employant des attaches et des arcs sur mesure - permet d'optimiser l'accélération du déplacement dentaire dans la phase de finition du traitement orthodontique. Finalement, la combinaison des deux techniques est donc pertinente pour maximaliser la réduction du temps de traitement en orthodontie. Par ailleurs, sur le plan fondamental, nous avons étudié, dans des essais précliniques chez le rat, les phénomènes biologiques sous-jacents à la piézocision à savoir une déminéralisation osseuse et un recrutement d'ostéoclastes plus important associés à une expression prédominante du duo RANKL-OPG.

Comparison of the use of piezosurgery expander and conventional instruments on primary implant stability.

OBJECTIVE: To compare the use of a piezosurgery expander and conventional chisel/osteotome on primary implant stability. MATERIALS AND METHODS: Twenty fresh ribs were divided into two main groups; group P and group C. In group P, bone expansion was performed using piezosurgery. In group C, bone expansion was performed using conventional chisel osteotomy. In both groups, the implants were inserted into the ribs after bone expansion. After implant placement, primary stability values were evaluated from the bucco-lingual (B-L) and mesio-distal (M-D) sides of the implant. RESULTS: The primary stability values on the B-L side of both implants in group P were significantly higher than in group C (P < 0.05). CONCLUSION: The use of piezo-expanders in the alveolar split technique has better effects on primary implant stability compared with the conventional technique.