Empagliflozin containing chitosan-alginate nanoparticles in orodispersible film: preparation, characterization, pharmacokinetic evaluation and its in-vitro anticancer activity.

OBJECTIVE: The main objective of this study was to develop the orodispersity film containing chitosan-alginate nanoparticles to improve dissolution profile, therapeutic effect with improved bioavailability of empagliflozin through oral route noninvasively for further cytotoxicity study. METHODS: The nanoparticles were developed through two-step mechanisms ionotropic pre-gelation and polyelectrolyte complexation methods. The prepared nanoparticles were added to a polymer matrix containing hypromellose, polyvinyl alcohol, and maltodextrin and cast to rapidly dissolving thin film by solvent casting method. RESULTS: The physicochemical characteristics of empagliflozin in the orodispersible film were most favorable for further studies. This formulation has achieved a higher permeability (7.2-fold) as compared to the reference drug product (Jardiance) after 45 min. In vivo pharmacokinetic studies in Wistar rats have revealed that chitosan-alginate empagliflozin nanoparticles in the orodispersible film were 1.18-fold more bioavailable in comparison to free empagliflozin in orodispersible film. The Cmax observed for the empagliflozin-loaded orodispersible film was 15.42 ± 5.13 µg/mL in comparison to 18.21 ± 5.53 µg/mL for empagliflozin nanoparticle-containing orodispersible film and 12.19 ± 6.71 µg/mL for freed rug suspension. The t1/2and AUC0-t values for chitosan-alginate nanoparticles of empagliflozin in the orodispersible film were found1.4-fold more than empagliflozin loaded orodispersible film (without nanoparticles). The cytotoxicity study has shown that chitosan-alginate nanoparticles of empagliflozin in orodispersible film achieved a 2.5-fold higher cytotoxic effect than free empagliflozin in orodispersible film in A549lung cancer cells. CONCLUSIONS: This study provides evidence that chitosan-alginate nanoparticles of empagliflozin in orodispersible film can be an effective drug carrier system to improve sustained effect with better bioavailability of poorly water-soluble drug.

Assessment of Binary Agarose-Carbopol Buccal Gels for Mucoadhesive Drug Delivery: Ex Vivo and In Vivo Characterization.

Agarose (AG) is a naturally occurring biocompatible marine seaweed extract that is converted to hydrocolloid gel in hot water with notable gel strength. Currently, its mucoadhesion properties have not been fully explored. Therefore, the main aim of this study was to evaluate the mucoadhesive potential of AG binary dispersions in combination with Carbopol 934P (CP) as mucoadhesive gel preparations. The gels fabricated via homogenization were evaluated for ex vivo mucoadhesion, swelling index (SI), dissolution and stability studies. The mucoadhesive properties of AG were concentration dependent and it was improved by the addition of CP. Maximum mucoadhesive strength (MS) (27.03 g), mucoadhesive flow time (FT) (192.2 min), mucoadhesive time in volunteers (MT) (203.2 min) and SI (23.6% at 4 h) were observed with formulation F9. The mucoadhesive time investigated in volunteers (MT) was influenced by AG concentration and was greater than corresponding FT values. Formulations containing 0.3%, w/v AG (F3 and F9) were able to sustain the release (~99%) for both drugs till 3 h. The optimized formulation (F9) did not evoke any inflammation, irritation or pain in the buccal cavity of healthy volunteers and was also stable up to 6 months. Therefore, AG could be considered a natural and potential polymer with profound mucoadhesive properties to deliver drugs through the mucosal route.

Development of lamivudine liposomes by three-level factorial design approach for optimum entrapment and enhancing tissue targeting.

Aim: This work aimed to encapsulate lamivudine in liposomes for targeted delivery to HIV reservoirs and thereby reduce its side effects.Methods: The lamivudine liposomes were prepared by thin film hydration method using 32 factorial design and characterised for vesicle size, % drug entrapment efficiency, polydispersity index etc. Optimisation by graphical and numerical methods was carried out by fixing minimum and maximum limits for each response. In vivo plasma and tissue distribution of plain lamivudine and lamivudine encapsulated optimised liposomes were compared in rats.Results: The optimised liposomes displayed vesicle size 276.20 ± 13.36 nm, percent entrapment 60.20 ± 2.86% and PDI 0.291 ± 0.053. Compared to plain lamivudine, the liposomes were rapidly cleared from the plasma and displayed 10.97 ± 0.72 and 1.38 ± 0.52 fold accumulation in liver and spleen tissues respectively.Conclusions: Lamivudine encapsulated in liposomes remains in the body for a longer period of time with well distribution in tissues.

Physicochemical stability of bioadhesive thermoresponsive platforms for methylene blue and hypericin delivery in photodynamic therapy.

Hypericin (Hyp), a natural hydrophobic and photoactive pigment, and methylene blue (MB), a hydrophilic cationic dye, are utilized as photosensitizer (PS) for photodynamic therapy of cancer. Bioadhesive and thermoresponsive polymeric systems can improve the drug availability by increasing the contact time between the system and the mucosa and also controlling the drug release. In this work, an accelerated physicochemical stability study of binary polymeric systems composed of poloxamer 407 (Polox) and Carbopol 934 P (Carb) for MB or Hyp release was performed. Formulations were prepared containing Polox (20%, w/w), Carb (0.15%, w/w) and MB (0.25%, w/w) or Hyp (0.01%, W/W) and submitted to different stress conditions (5 ± 3 °C, 25 ± 2 °C and 40 ± 2 °C with relative humidity of 75 ± 5%) during 180 days. The samples were analyzed as macroscopic characteristics, photosensitizer content and mechanical properties by texture profile analysis. Both systems displayed decrease of photosensitizer content less than 5% during 180 days. MB-system showed an undefined reaction model, while Hyp-system displayed PS decay following a pseudo first-order reaction. Systems also displayed stable mechanical characteristics. The pharmaceutical analyses showed the good physicochemical stability of the bioadhesive platform for delivery Hyp and MB in photodynamic therapy.

Development of spray-dried amorphous solid dispersions of tadalafil using glycyrrhizin for enhanced dissolution and aphrodisiac activity in male rats.

Tadalafil (TDL) is a phosphodiesterase-5 inhibitor (PDE5I), indicated for erectile dysfunction (ED). However, TDL exhibits poor aqueous solubility and dissolution rate, which may limit its application. This study aims to prepare amorphous solid dispersion (ASD) by spray-drying, using glycyrrhizin-a natural drug carrier. Particle and physicochemical characterizations were performed by particle size, polydispersity index measurement, yield, drug content estimation, Fourier Transformed Infrared (FTIR) spectroscopy, Differential scanning calorimetry (DSC), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and dissolution study. In order to evaluate the aphrodisiac activity of the prepared ASD, sexual behavior study was performed in male rats. It is further considered for the stability study. Our results revealed that TDL-GLZ spray-dried dispersion was a successful drug-carrier binary mixture. XRD and SEM showed that ASD of TDL with GLZ presented in the amorphous state and dented-spherical shape, unlike the drug indicating crystalline and spiked shaped. The optimized ASD3 formulation with particle size (1.92 µm), PDI (0.32), yield (97.78%) and drug content (85.00%) showed 4.07 folds' increase in dissolution rate compared to pure TDL. The results obtained from the in vivo study exhibit significantly improved aphrodisiac activity with ASD3. The stability study revealed that the prepared ASD3 did not show any remarkable changes in the dissolution and drug content for 1 month storage at room temperature.

Evaluation of bilosomes as nanocarriers for transdermal delivery of tizanidine hydrochloride: in vitro and ex vivo optimization.

Bilosomes were developed in order to investigate their efficacy as nanocarriers for transdermal delivery of Tizanidine HCl (TZN), a skeletal muscle relaxant with low oral bioavailability. Full factorial experimental design consisting of 27 combinations was generated to study the effects of surfactant type, surfactant-to-cholesterol ratio and the amount of bile salt on the entrapment efficiency (EE), the vesicle size (VS) and in vitro dissolution of the TZN-loaded bilosomes. The permeation through the stratum cornea was optimized with the vertical diffusion assembly using excised rat skin. The permeation parameters of the selected bilosomes were compared to the unformulated drug and it was shown that TZN-B24 exhibited the highest enhancement ratio (ER = 8.8).The optimal formula (TZN-B24) consisting of span 60 in a ratio with cholesterol of 1:1 and 20 mg of bile salt was obtained by employing the desirability function of Design-Expert® software. The mathematical model used for the optimization was validated by comparing the predicted values of the EE (82.3%) and the VS (165.8 nm) with the experimental values of EE = 84.42% and of VS = 161.95 nm. TZN-B24 displayed high zeta potential which contributed to its good stability. It was evident from the results of this study that incorporating TZN in bilosomes improved significantly its permeation through the skin barrier and thus bilosomes can offer a potential nanoplatform using the transdermal route to improve the bioavailability of the drug.

Development and effect of storage on the stability of enriched flavonoid fraction of Cecropia glaziovii-loaded PLGA nanoparticles.

Studies employing Cecropia glaziovii Snethl leaves have shown great potential in regard to their antiviral activity, mainly related to the phenolic compounds present in this species. The main goal of this work is to combine the therapeutic potential of this species with new technological strategies targeted at the development of an herbal nanoparticulate system for the preparation of a phytotherapeutic formulation. Poly (lactic-co-glycolic acid) nanoparticles containing the enriched flavonoid fraction of Cecropia glaziovii Snethl were developed through a study for the choice of preparation technique, amount of drug and surfactants used. These nanostructured systems were characterized by particle size, polydispersity, zeta potential, encapsulation efficiency and drug-loading capacity. A stability study of the formulations was conducted at room temperature over a period of 60 days. The optimal formulation that best fit the characteristics of the encapsulated material was determined. Sorbitan monooleate and the poloxamer 188 resulted in better colloidal stability, added to the organic and aqueous phases, respectively. These findings suggest that in the field of nanoparticles stability, it is important to evaluate the composition of the nanoparticulate system. This work highlights the importance of the optimization process, searching for a good formulation with suitable structural stabilization.

Palm Olein Emulsion: a Novel Vehicle for Topical Drug Delivery of Betamethasone 17-Valerate.

This study aims to investigate the use of palm olein as the oil phase for betamethasone 17-valerate (BV) emulsions. The physicochemical properties of the formulations were characterized. In vitro drug release study was performed with the Hanson Vertical Diffusion Cell System; the samples were quantified with HPLC and the results were compared with commercial products. Optimized emulsion formulations were subjected to stability studies for 3 months at temperatures of 4, 25, and 40°C; the betamethasone 17-valerate content was analyzed using HPLC. The formulations produced mean particle size of 2-4 µm, viscosities of 50-250 mPa.s, and zeta potential between -45 and -68 mV. The rheological analyses showed that the emulsions exhibited pseudoplastic and viscoelastic behavior. The in vitro release of BV from palm olein emulsion through cellulose acetate was 4.5 times higher than that of commercial products and more BV molecules deposited in rat skin. Less than 4% of the drug was degraded in the formulations during the 3-month period when they were subjected to the three different temperatures. These findings indicate that palm olein-in-water emulsion can be an alternative vehicle for topical drug delivery system with superior permeability.

Stability of 10 mg/mL cefuroxime solution for intracameral injection in commonly used polypropylene syringes and new ready-to-use cyclic olefin copolymer sterile vials using the LC-UV stability-indicating method.

CONTEXT: Injecting intracameral cefuroxime has been found beneficial in reducing the risk of postoperative endophthalmitis but its use has been limited through a lack of approved marketing and of ready-to-use single-units as well as the problem of aseptic compounding. OBJECTIVE: Our aim was to assess a new automated primary packaging system which should ensure a higher level of sterility, thanks to its closed, sterile, ready-to-use polymer vial called "Crystal® vial". The chemical stability of a 10 mg/mL cefuroxime solution was compared in 1 mL Crystal® vials and 1 mL Luer-lock polypropylene syringes (actual reference) to eliminate any potential and specific interactions with its cyclic olefin copolymer (COC) body and elastomer stopper. METHODS: Cefuroxime solution was introduced into vials and syringes and stored at -20 °C, +5 °C and +25°C/60% Relative Humidity. Cefuroxime concentration and the relative amount of the main degradation product (descarbamoyl-cefuroxime) were both determined by an HPLC/UV method indicating stability. Solutions were considered steady if the concentration remained at over 90% of the initial value. In the adapted storage conditions, the evolution of osmolality, pH and sterility was assessed. RESULTS: Stability profiles were identical between vials and syringes in all storage and temperature conditions. The solution was stable (cefuroxime concentration, pH and osmolality) and still sterile for 365 days at -20°C. The concentration fell below 90% after 21 days at +5 °C and after 16 h at +25°C/60%s relative humidity. CONCLUSIONS: The COC and thermoplastic elastomer of the vials had no impact on the degradation process confirming its possible use for a ready-to-use cefuroxime solution single-unit dose.

Sterically stabilized liposomes as a potent carrier for shikonin.

The ability of pegylated liposomes (sterically stabilized liposomes-SSL) to localize in solid tumors via the enhanced permeability and retention (EPR) effect, partly depends on their long circulating properties which can be achieved by grafting polyethylene glycol (PEG) to the liposomes' surface. Alkannin and shikonin (A/S) are naturally occurring hydroxynaphthoquinones with a well-established spectrum of wound healing, antimicrobial, anti-inflammatory, antioxidant, and recently established antitumor activity. The purpose of this work was to prepare and characterize shikonin-loaded pegylated liposomes as a new drug carrier for shikonin, as a continuation of authors' previous work on conventional shikonin-loaded liposomal formulations. Three new pegylated liposomal formulations of shikonin (DSPC-PEG2000, EPC-PEG2000, and DPPC-PEG2000) were prepared and characterized in terms of physicochemical characteristics, pharmacokinetics, and stability (at 4 °C, for 28 d) and compared with the corresponding conventional ones. Particle size distribution, ζ-potential, entrapment efficiency, and release profile of the entrapped drug were measured. Results indicated the successful incorporation of shikonin into liposomes alongside with their good physicochemical characteristics, high entrapment efficiency, satisfactory in vitro release profile, and good physical stability. The results are considered promising and could be used as a road map for designing further in vivo experiments.

Physicochemical stability of bortezomib solutions for subcutaneous administration.

For the majority of cytotoxic drug preparations, such as bortezomib, the unit dose information is not available. In addition, there is a lack of information on the physicochemical stability of the pharmaceutical preparation after opening; this information is crucial for its administration to patients in successive visits, and the per-patient cost can be affected. The purpose of our proposed physicochemical stability study is to determine the shelf life of the reconstituted liquid product under refrigeration and clinical practice conditions. This evaluation was extended to both vials and ready-to-use syringes prefilled with the contents of the open vial. The stability test design includes the specified storage conditions and the critical physicochemical parameters of reconstituted injectable bortezomib. Furthermore, this approach includes the determination of impurities, the monitoring of the purity of the mean peak using a photodiode array, the control of the mass balance, the monitoring of subvisible particles using a laser diffraction analyser, and the setting of stability specifications. For the chemical stability study, the amount of bortezomib and its degradation products were determined using a stability-indicating HPLC method. The physical inspection of the samples was performed throughout the stability study, and their pH values were also monitored. Bortezomib (2.5 mg/mL) in 0.9% sodium chloride remained stable for 7 days when stored in both polypropylene syringes and vials at 5 ± 3 °C (refrigeration) and shielded from light. Additionally, it exhibits stability for 24 h under storage conditions simulating clinical use (20-30 °C and protected from light). The proposed protocol provides the stability in the vials once reconstituted and in prefilled refrigerated syringes; this protocol can be used to reduce waste and increase cost savings.

NDMA Formation Due to Active Ingredient Degradation and Nitrite Traces in Drug Product.

N-nitrosamines are genotoxic compounds which can be found as impurities in drug substances and drug products used in the pharmaceutical industry. To date, several possible nitrosamine sources in drug products have been reported and this study aims to illuminate another one. A case of afatinib drug product was investigated, in which up to 50 ppb N-nitrosodimethylamine (NDMA) traces were detected. Afatinib was found to degrade to the secondary amine dimethylamine (DMA), forming NDMA with traces of nitrite in crospovidone. Two series of film-coated tablets were prepared with crospovidone from two different manufacturers, containing different levels of nitrites. Tablets were subjected to an accelerated stability study (40 °C/75% relative humidity) or stored at room temperature and levels of NDMA, DMA and nitrite in tablets were monitored. NDMA and nitrite were found on ppb levels, whereas DMA was detected on ppm levels. NDMA formation in the drug product was found to be time, temperature and nitrite dependent and it was emphasized that DMA and nitrite should be reduced. The accelerated stability study proved to be a useful tool for predicting nitrosamine formation in the drug product.

Stability of a high-concentrated aqueous solution of idarubicin stored in a polypropylene syringe for transarterial chemoembolization.

Idarubicin (IDA) is an antineoplasic drug commonly used to treat hematologic diseases. Because of its relative lipophilic properties, this anthracycline is also used in transarterial chemoembolization (TACE) as part of hepatocellular carcinoma (HCC) treatment. But TACE requires injected volume to be reduced to restrict systemic diffusion and side effects. The aim of this study was to determine the stability of a highly concentrated aqueous solution of IDA, stored in polypropylene syringes between 2 °C and 8 °C. Analyses were performed with an HPLC system combined with UV detector and mass spectrometer. Forced degradation was used to investigate potential degradation products. This study demonstrated 7 days of stability after storage in previously mentioned conditions. This conservation is long enough to anticipate drug preparation and facilitates pharmacy organization.

Tracking the physicochemical stability of teduglutide (Revestive®) clinical solutions over time in different storage containers.

Teduglutide, the active ingredient of the medicine Revestive® (5 mg), is a recombinant therapeutic peptide that mimics the effects of the endogenous glucagon-like peptide 2 (GLP-2). It stimulates intestinal growth, adaptation and function in patients with Short Bowel Syndrome who are dependent on parenteral nutrition. The Summary of Product Characteristics recommends immediate use of the reconstituted solutions and the discarding of any subsequent surplus. This study aims to carry out a long-term stability study that reproduces hospital conditions of use which provide sound evidence regarding the use of teduglutide surplus beyond the Summary Product Characteristics recommendations. We conducted a stability study of teduglutide solutions prepared from a 5 mg vial of Revestive®. Some of the solutions were stored in their original vial after reconstitution, while others were repackaged in plastic syringes to evaluate their physicochemical stability over time. For this purpose, we applied a set of previously validated analytical methodologies to evaluate the main critical quality attributes of teduglutide, i.e., primary (including post-tralational modifications), secondary and tertiary structures, aggregates, particulate, concentration and pH. The results indicate that the solutions maintain high physicochemical stability over time, regardless of the storage temperature (4ºC or -20ºC) or the storage container (vials or syringes). This research provides new data on the stability of Revestive® that will be of great value to hospital pharmacists. This comprehensive assessment of the physicochemical long-term stability of TGT has demonstrated that under the storage conditions and over the period studied here, the medicine maintains its quality, efficacy and safety profiles.

A rapid and quantitative reversed-phase HPLC-DAD/ELSD method for lipids involved in nanoparticle formulations.

Lipid nanoparticles (LNPs) have shown great success as drug delivery systems, especially for mRNA vaccines, as those developed during the Covid-19 pandemics. Lipid analysis is critical to monitor the formulation process and control the quality of LNPs. The present study is focused on the development and validation of a high-performance liquid chromatography - diode array detector -evaporative light scattering detector (HPLC-DAD/ELSD) based method for the simultaneous quantification of 7 lipids, illustrating the main components of LNPs: ionizable lipids, the neutral co-lipid cholesterol, phospholipids, hydrophilic polymer-lipids for colloidal stability (e.g., a PEGylated lipid). In particular, this study focuses on two innovative synthetic lipids: a switchable cationic lipid (CSL3) which has demonstrated in vitro and in vivo siRNA transfection abilities, and the palmitic acid-grafted-poly(ethyloxazoline)5000 (PolyEtOx), used as an alternative polymer to address allergic reactions attributed to PEGylated lipids. The HPLC separation was achieved on a Poroshell C18 column at 50 °C using a step gradient of a mobile phase composed of water/methanol mixtures with 0.1% (v/v) trifluoroacetic acid (TFA). This method was validated following ICH Q2(R1) & (R2) guidelines in terms of linearity (R² ≥ 0.997), precision (relative standard deviation on peak areas < 5% for intermediate repeatability), accuracy (recoveries between 92.9% and 108.5%), and sensitivity. Indeed, low detection and quantitation limits were determined (between 0.02 and 0.04 µg and between 0.04 and 0.10 µg, respectively). Due to its high selectivity, this method allowed the analysis of lipid degradation products produced through degradation studies in basic, acidic, and oxidative conditions. Moreover, the method was successfully applied to the analysis of several liposome formulations at two key steps of the development process. Consequently, the reported HPLC method offers fast, versatile, selective and quantitative analysis of lipids, essential for development optimization, chemical characterization, and stability testing of LNP formulations.

Polyethylene glycol-based linkers as hydrophilicity reservoir for antibody-drug conjugates.

Antibody-drug conjugates (ADCs) are an established therapeutic entity in which potent cytotoxic drugs are conjugated to a monoclonal antibody. In parallel with the great emphasis put on novel site-specific bioconjugation technologies, future advancements in this field also rely on exploring novel linker-drug architectures that improve the efficacy and stability of ADCs. In this context, the use of hydrophilic linkers represents a valid strategy to mask or reduce the inherent hydrophobicity of the most used cytotoxic drugs and positively impact the physical stability and in vivo performance of ADCs. Here, we describe the use of linkers containing monodisperse poly(ethylene glycol) (PEG) moieties for the construction of highly-loaded lysine-conjugated ADCs. The studied ADCs differ in the positioning of PEG (linear or pendant), the bonding type with the antibody (amide or carbamate), and the drug-to-antibody ratio (DAR). These ADCs were first evaluated for their stability in solution under thermal stress, showing that both the drug-linker-polymer design and the nature of the antibody-linker bonding are of great importance for their physical and chemical stability. Amide-coupled ADCs bearing two pendant 12-unit poly(ethylene glycol) chains within the drug-linker structure were the best performing conjugates, distancing themselves from the ADCs obtained with a conventional linear 24-unit PEG oligomer or the linker of Kadcyla®. The pharmacokinetic profiles of amide-linked ADCs, with a linear or pendant configuration of the PEG, were tested in mice in comparison to Kadcyla®. Total antibody pharmacokinetics paralleled the trends in aggregation tendency, with slower clearance rates for the ADCs based on the pendant drug-linker format. The above-mentioned findings have provided important clues on the drug-linker design and revealed that the positioning and configuration of a PEG unit have to be carefully tuned to achieve ADCs with improved stability and pharmacokinetics.

Structure elucidation and formation mechanistic study of a methylene-bridged pregabalin dimeric degradant in pregabalin extended-release tablets.

During the pharmaceutical development of pregabalin extended-release tablets, an unknown degradant at a relative retention time (RRT) of 11.7 was observed and its nominal amount exceeded the ICH identification threshold in an accelerated stability study. The aim of this study is to identify the structure and investigate the formation mechanism of this impurity for the purpose of developing a chemically stable pharmaceutical product. By utilizing multi-stage LC-MS analysis in conjunction with mechanism-based stress study, the structure of the RRT 11.7 impurity was rapidly identified as a dimeric degradant that is caused by dimerization of two pregabalin molecules with a methylene bridging the two pregabalin moieties. The structure of the dimer was confirmed by 1D and 2D NMR measurement. The formation pathway of the dimeric degradant was also inferred from the mechanism-based stress study, which implicated that the bridging methylene could originate from formaldehyde which might be the culprit that triggers the dimerization in the first place. The subsequent API-excipients compatibility study indicated that the degradant was indeed formed in the compatibility experiments between pregabalin API and two polymeric excipients (PEO and PVPP) that are known to contain residual formaldehyde, but only in the co-presence of another excipient, colloidal silicon dioxide (SiO2). The kinetic behavior of the degradant formation was also investigated and two kinetic models were utilized based on the Arrhenius and Eyring equations, respectively, to calculate the activation energy (Ea) as well as the enthalpy of activation (△H‡), entropy of activation (△S‡), and Gibbs free energy (△G‡) of the degradation reaction. The results of this study would be useful for the understanding of similar dimeric degradant formation in finished products of drug substances containing primary or secondary amine moieties.

Eradication of meticillin-resistant Staphylococcus aureus from human skin by the novel LL-37-derived peptide P10 in four pharmaceutical ointments.

Skin bacterial colonization/infection is a frequent cause of morbidity in patients with chronic wounds and allergic/inflammatory skin diseases. This study aimed to develop a novel approach to eradicate meticillin-resistant Staphylococcus aureus (MRSA) from human skin. To achieve this, the stability and antibacterial activity of the novel LL-37-derived peptide P10 in four ointments was compared. Results indicate that P10 is chemically stable and antibacterial in hypromellose gel and Softisan-containing cream, but not in Cetomacrogol cream (with or without Vaseline), at 4 °C for 16 months. Reduction in MRSA counts on Leiden human epidermal models (LEMs) by P10 in hypromellose gel was greater than that of the peptide in Cetomacrogol cream or phosphate buffered saline. P10 did not show adverse effects on LEMs irrespective of the ointment used, while Cetomacrogol with Vaseline and Softisan cream, but not hypromellose gel or Cetomacrogol cream, destroyed MRSA-colonized LEMs. Taking all this into account, P10 in hypromellose gel dose-dependently reduced MRSA colonizing the stratum corneum of the epidermis as well as biofilms of this bacterial strain on LEMs. Moreover, P10 dose-dependently reduced MRSA counts on ex-vivo human skin, with P10 in hypromellose gel being more effective than P10 in Cetomacrogol and Softisan creams. P10 in hypromellose gel is a strong candidate for eradication of MRSA from human skin.

Determination of 14 aminoglycosides by LC-MS/MS using molecularly imprinted polymer solid phase extraction for clean-up.

An LC-MS/MS method for screening 14 aminoglycosides in foodstuffs of animal origin is presented. Its scope includes raw materials and processed ingredients but also finished products composed of milk, meat, fish, egg or fat. Aminoglycosides are extracted in an acidic aqueous solution, which is first recovered after centrifugation, then diluted with a basic buffer and finally purified by molecularly imprinted polymer-solid phase extraction (MIP-SPE). Analytes are detected within 8 min by ion-pair reversed phase LC-MS/MS. Due to the large range of foodstuffs involved, the variability of matrix effects led to significant MS signal variations. This was circumvented by systematically extracting each sample twice, i.e. 'unspiked' and 'spiked' at the screening target concentration of 50 µg kg-1. The method was validated according to the European Community Reference Laboratories Residues Guidelines giving false-negative and false-positive rates ≤3% for all compounds. Ruggedness of the method was further demonstrated in quality control operations by a second laboratory. The 14 aminoglycosides in water-based standard solutions were stable for up to 6 months when stored at either -80°C, -20°C or at 4°C storage temperatures.

Design and in vitro/in vivo evaluation of sustained-release floating tablets of itopride hydrochloride.

PURPOSE: The aim of the present study was to improve the bioavailability of itopride (ITO) and sustain its action by formulating as a floating dosage form. MATERIALS AND METHODS: Sustained-release floating tablets of ITO hydrochloride (HCl) were prepared by direct compression using different hydrocolloid polymers such as hydroxypropyl methylcellulose and ethylcellulose and/or methacrylic acid polymers Eudragit RSPM and Carbopol 934P. The floating property was achieved using an effervescent mixture of sodium bicarbonate and anhydrous citric acid (1:1 mol/mol). Hardness, friability, content uniformity, and dissolution rate of the prepared floating tablets were evaluated. The formulation F10 composed of 28.5% Eudragit RSPM, 3% NaHCO3, and 7% citric acid provided sustained drug release. RESULTS: In vitro results showed sustained release of F10 where the drug release percentage was 96.51%±1.75% after 24 hours (P=0.031). The pharmacokinetic results indicated that the area under the curve (AUC0-∞) of the prepared sustained-release floating tablets at infinity achieved 93.69 µg·h/mL compared to 49.89 µg·h/mL for the reference formulation (Ganaton®) and the relative bioavailability of the sustained-release formulation F10 increased to 187.80% (P=0.022). CONCLUSION: The prepared floating tablets of ITO HCl (F10) could be a promising drug delivery system with sustained-release action and enhanced drug bioavailability.