A systematic review of preclinical data regarding commercial silver-coated vascular grafts.

OBJECTIVE: Vascular graft infection (VGI) is a serious complication with high mortality and morbidity rates. Several measures could be taken to decrease this risk, including the use of silver-containing vascular grafts. However, to date, no clinical advantages have been reported. This study reviews the outcome of preclinical studies focusing on the role of commercially available silver-coated grafts in the prevention of VGI. METHODS: A systematic review was performed with a focus on the preclinical role of commercially available silver-coated vascular grafts in the prevention and treatment of VGI. A comprehensive search was conducted in Medline, Embase, and Web of Science. RESULTS: Nine in vitro and five in vivo studies were included. Two commercial grafts were used (INTERGARD SILVER and Silver Graft). In vitro studies used both gram-positive and gram-negative strains. A positive antimicrobial effect was observed in seven of nine studies (77.8%). A delayed antifungal effect against Candida species was observed in vitro, but disappeared when adding serum proteins. In vivo studies witnessed a microbicidal effect in two out of five studies (40%), but only tested a single causative pathogen (ie, Staphylococcus aureus). CONCLUSIONS: Both in vitro and in vivo studies demonstrated conflicting and mixed results concerning the antimicrobial efficacy of commercially available silver-containing grafts in the prevention of VGI. In general, the study setup was heterogeneous in the different articles. Given the lack of convincing preclinical evidence and their poor performance in clinical studies, more data are needed at this time to guide the appropriate use of silver grafts.

Surface Characterization, Biocompatibility and Antifungal Efficacy of a Denture-Lining Material Containing Cnidium officinale Extracts.

Herein, we investigated the surface characterization and biocompatibility of a denture-lining material containing Cnidium officinale extracts and its antifungal efficacy against Candida albicans. To achieve this, a denture-lining material containing various concentrations of C. officinale extract and a control group without C. officinale extract were prepared. The surface characterization and biocompatibility of the samples were investigated. In addition, the antifungal efficacy of the samples on C. albicans was investigated using spectrophotometric growth and a LIVE/DEAD assay. The results revealed that there was no significant difference between the biocompatibility of the experimental and control groups (p > 0.05). However, there was a significant difference between the antifungal efficiency of the denture material on C. albicans and that of the control group (p < 0.05), which was confirmed by the LIVE/DEAD assay. These results indicate the promising potential of the C. officinale extract-containing denture-lining material as an antifungal dental material.

New therapeutic system based on hydrogels for vaginal candidiasis management: formulation-characterization and in vitro evaluation based on vaginal irritation and direct contact test.

The objective of the present research was to examine the possible usage of terbinafine loaded hydrogels for vaginal application as part of vaginal candidiasis treatment. Vaginal candidiasis belongs to the most frequent gynecological disorders. Various antifungal drugs are used for its treatment, with Terbinafine being one of them. In this study, new gel formulations were prepared for Terbinafine vaginal delivery. Natural polymers such as chitosan, sodium carboxymethylcellulose, and Carbopol were used for the development of Terbinafine vaginal gels. The developed gels were examined for their viscosity and spreadability, pH and mechanical properties. The most optimal formulations were further evaluated for their in vitro release behavior and antifungal activities. In further, the cytotoxicity and irritation inducing capacity of optimum gel formulations were evaluated. In vitro drug release studies demonstrated that terbinafine release was prolonged whereas anti-candida activity in several species showed the superiority of the gels compared to the marketed product. G-5 and G-8 gels did not cause lysis, hemorrhage and coagulation, therefore, classified as non-irritant. The optimal formulations were also studied for their stability, demonstrating that they were stable for 3 months.

Effects of surface pre-reacted glass-ionomer (S-PRG) eluate on Candida spp.: antifungal activity, anti-biofilm properties, and protective effects on Galleria mellonella against C. albicans infection.

Surface pre-reacted glass-ionomer (S-PRG) is a bioactive filler produced by PRG technology, which is applied to various dental materials. The inhibitory effects of S-PRG eluate against Candida, the most common fungal oral pathogen, were investigated. Minimum inhibitory concentrations (MIC) and anti-biofilm activities were tested against Candida albicans, Candida glabrata, Candida krusei, and Candida tropicalis. For the in vivo study, Galleria mellonella was used as a model to evaluate the effects of S-PRG on toxicity, hemocyte counts and candidiasis. The MIC of S-PRG ranged from 5 to 40% (v/v). S-PRG eluate exhibited anti-biofilm activity for all the Candida species tested. Furthermore, injection of S-PRG eluate into G. mellonella was not toxic to the larvae and protected G. mellonella against experimental candidiasis. In addition, S-PRG eluate inhibited biofilm formation by C. albicans, C. glabrata, C. krusei, and C. tropicalis and exerted protective effects on G. mellonella against experimental candidiasis in vivo.

Microemulsion for topical delivery of fenoprofen calcium: in vitro and in vivo evaluation.

The aim of this study was to investigate microemulsion (ME) based topical delivery system for fenoprofen calcium (FPCa) to eliminate its oral gastrointestinal adverse effects. ME was prepared by the water titration method using oleic acid as oil phase, tween 80 as a surfactant and propylene glycol as a cosurfactant. Oleic acid was selected as oil phase due to its good solubilizing capacity. ME existence region was determined using pseudo-ternary phase diagrams for preparing different formulations. Six different formulations were selected with various values of oil (25-68%), water (2-3%), and the mixture of surfactant and cosurfactant (1:1) (24-67%). The selected ME formulae were characterized for optical birefringence, transmission electron microscopy (TEM), pH, % transmittance, electronic conductivity, drug content, droplet size, rheological properties and stability evaluation. In vitro release study of FPCa from ME s through the synthetic membrane and hairless rat skin were evaluated. The optimized formula ME5 consisting of 5% w/w FPCa, 60% w/w oleic acid as oil phase, 3% w/w aqueous phase, and 32% w/w of surfactant phase containing Tween 80 and propylene glycol (1: 1) showed the highest transdermal flux and highest skin permeation rate. Finally, the % inhibition of carrageenan-induced rat paw edema of the optimized formula ME5 was highly significant (p < 0.001) as compared to plain gel of FPCa. In conclusion, ME is a promising technique for topical delivery of FPCa.

Fungicidal PMMA-Undecylenic Acid Composites.

Undecylenic acid (UA), known as antifungal agent, still cannot be used to efficiently modify commercial dental materials in such a way that this affects Candida. Actually, issues with Candida infections and fungal resistance compromise the use of Poly(methyl-methacrylate) (PMMA) as dental material. The challenge remains to turn PMMA into an antifugal material, which can ideally affect both sessile (attached) and planktonic (free-floating) Candida cells. We aimed to tackle this challenge by designing PMMA-UA composites with different UA concentrations (3-12%). We studied their physico-chemical properties, the antifungal effect on Candida and the cytotoxicity toward human cells. We found that UA changes the PMMA surface into a more hydrophilic one. Mainly, as-preparation composites with ≥6% UA reduced sessile Candida for >90%. After six days, the composites were still efficiently reducing the sessile Candida cells (for ~70% for composites with ≥6% UA). Similar results were recorded for planktonic Candida. Moreover, the inhibition zone increased along with the UA concentration. The antifungal effect of UA was also examined at the surface of an UA-loaded agar and the minimal inhibitory concentration (MIC90) was below the lowest-studied 0.0125% UA. Furthermore, the embedded filamentation test after 24 h and 48 h showed complete inhibition of the Candida growth at 0.4% UA.

Preparation, characterization and toxicity evaluation of amphotericin B loaded MPEG-PCL micelles and its application for buccal tablets.

Oral candidiasis or thrush is a fungal infection due to Candida albicans, causing discomfort in areas inside mouth or tongue. The clinical application of antifungal reagent amphotericin B (AMB), which is believed to offer a better treatment for oral candidiasis, is greatly compromised by its toxicities (mainly nephrotoxicity) and poor solubility. In order to overcome these issues, we characterized AMB-loaded MPEG-PCL micelles in vitro and in vivo. In addition, the antifungal activities of AMB/MPEG-PCL micelles-loaded buccal tablet were also evaluated in vitro. We found that micelles system could significantly improve the solubility of AMB yet reduce the overall toxicity, while the buccal tablet system is capable to suppress C. albicans biofilm formation. Furthermore, the toxicity of the buccal tablet system is also reduced compared with other standard preparations. Therefore, the prepared tablet with AMB-loaded MPEG-PCL micelles as oral topical preparations has the potential to improve current treatment of superficial oral C. albicans infections.

General Toxicity and Antifungal Activity of a New Dental Gel with Essential Oil from Abies Sibirica L.

BACKGROUND The aim of this study was to analyze the antifungal activity and the general toxicity of a new dental gel containing essential oil from the tree Abies sibirica L., which grows in the Republic of Kazakhstan. MATERIAL AND METHODS The essential oil from Abies sibirica L. was obtained by microwave heating method using the STARTE Microwave Extraction System. Adjutants used to prepare the oil were carbomer 974P, glycerin, polysorbate 80, xylitol, triethanolamine, and purified water, all allowed for medical usage. The antifungal activity of the essential oil was assessed by monitoring the optical density of Candida albicans in a microplate reader. The safety was determined by analyzing the acute and subacute toxicity. RESULTS The essential oil obtained by the microwave heating method revealed a higher antifungal activity in comparison with the essential oil obtained by the steam distillation method. No obvious changes were detected in guinea pigs following cutaneous application of the gel. Enteral administration of the essential oil caused minimal functional and histological changes in mice after 4 weeks. The new harmless dental gel containing pine oil from Abies sibirica L. was provided for the purposes of this particular clinical research. CONCLUSIONS The high antifungal activity of the gel is the basis for more in-depth studies on its safety and pharmacological activity.

Antifungal activity of plant-derived essential oils on Candida tropicalis planktonic and biofilms cells.

Dental prosthesis supports Candida species growth and may predispose the oral cavity to lesions. C. tropicalis has emerged as a colonizer of prosthesis and has shown resistance to clinically used antifungal agents, which has increased the search for new antifungals. This work describes the effectiveness of fifteen essential oils (EOs) against C. tropicalis The EOs were obtained by hydrodistillation and were chemically characterized by gas chromatography-mass spectrometry. The antifungal activities of the EOs were evaluated by the microdilution method and showed that Pelargonium graveolens (Geraniaceae) (PG-EO) was the most effective oil. Geraniol and linalool were the major constituents of PG-EO. The 2,3-Bis-(2-Methoxy-4-Nitro-5-Sulfophenyl)-2H-Tetrazolium-5-Carboxanilide (XTT) assay showed that all the clinical C. tropicalis strains formed viable biofilms. Scanning electron microscopy examination of the biofilms revealed a complex architecture with basal layer of yeast cells and an upper layer of filamentous cells. Treatments with PG-EO, linalool, and geraniol significantly reduced the number of viable biofilm cells and inhibited biofilm formation after exposure for 48 h. PG-EO, geraniol, and linalool were not toxic to normal human lung fibroblasts (GM07492A) at the concentrations they were active against C. tropicalis Together, our results indicated that C. tropicalis is susceptible to treatment with PG-EO, geraniol, and linalool, which could become options to prevent or treat this infection.

SUMO expression shortens the lag phase of Saccharomyces cerevisiae yeast growth caused by complex interactive effects of major mixed fermentation inhibitors found in hot-compressed water-treated lignocellulosic hydrolysate.

The complex inhibitory effects of inhibitors present in lignocellulose hydrolysate suppress the ethanol fermentation of Saccharomyces cerevisiae. Although the interactive inhibitory effects play important roles in the actual hydrolysate, few studies have investigated glycolaldehyde, the key inhibitor of hot-compressed water-treated lignocellulose hydrolysate. Given this challenge, we investigated the interactive effects of mixed fermentation inhibitors, including glycolaldehyde. First, we confirmed that glycolaldehyde was the most potent inhibitor in the hydrolysate and exerted interactive inhibitory effects in combination with major inhibitors. Next, through genome-wide analysis and megavariate data modeling, we identified SUMOylation as a novel potential mechanism to overcome the combinational inhibitory effects of fermentation inhibitors. Indeed, overall SUMOylation was increased and Pgk1, which produces an ATP molecule in glycolysis by substrate-level phosphorylation, was SUMOylated and degraded in response to glycolaldehyde. Augmenting the SUMO-dependent ubiquitin system in the ADH1-expressing strain significantly shortened the lag phase of growth, released cells from G2/M arrest, and improved energy status and glucose uptake in the inhibitor-containing medium. In summary, our study was the first to establish SUMOylation as a novel platform for regulating the lag phase caused by complex fermentation inhibitors.

Poly(L-lactide) Nanoparticles Reduce Amphotericin B Cytotoxicity and Maintain Its In Vitro Antifungal Activity.

In this study, poly(L-lactide) (PLA) nanoparticles containing amphotericin B (AmB) were developed, and the in vitro cytotoxicity to human erythrocytes and efficacy on strains of Candida spp. were evaluated. The nanoparticles were prepared using an emulsion/solvent evaporation method and were characterized with respect to size, size distribution, AmB encapsulation efficiency, AmB state of aggregation, and AmB in vitro release profile. The mean particle size was 225 nm, and the AmB encapsulation efficiency was over 69%. The AmB in vitro release profile revealed a burst effect within the first 24 h, which released approximately 10% of AmB, followed by a sustained release of approximately 30% of AmB over 30 days. The AmB nanoparticles presented a very low index of hemolysis compared to free AmB, which lysed more than 80% of erythrocytes in the first 2 h of incubation. The AmB-loaded PLA nanoparticles were as effective as free AmB against strains of Candida spp., considering their sustained release profile. Thus, PLA nanoparticles can deliver AmB with reduced toxicity while maintaining its antifungal activity.

Liposomal Formulation Decreases Toxicity of Amphotericin B In Vitro and In Vivo.

BACKGROUND: Liposomal amphotericin B is locally delivered to treat fungal orthopaedic infections but little is known about local tissue toxicity, if any, that might be associated with local delivery. QUESTIONS/PURPOSES: (1) Is liposomal amphotericin B cytotoxic in vitro? (2) Is locally delivered liposomal amphotericin B toxic to tissue in vivo? METHODS: Mouse fibroblasts (BA LB/3T3 A31) and osteoblasts (MC3T3) were exposed to two formulations of amphotericin B (liposomal and deoxycholate) at concentrations of 0, 1, 5, 10, 100, 500, and 1000 µg/mL. Cell viability was determined by MTT assay after 1, 3, and 5 hours of exposure and a proliferation assay after 1, 4, and 7 days of exposure and then after 3 recovery days without drug. Tissue exposure occurred by local delivery of liposomal amphotericin B, 200 or 800 mg/batch antifungal-loaded bone cement (ALBC), or amphotericin B deoxycholate, 800 mg/batch ALBC in rat paraspinal muscles. White blood cell count (WBC) and serum amphotericin B levels were obtained on Days 1 and 3. Rats were euthanized at 2 and 4 weeks and semiqualitative histopathology was performed. RESULTS: Liposomal amphotericin B is cytotoxic in vitro but not toxic to tissues in vivo. All cells survived concentrations up to 1000 µg/mL for 5 hours, 100% ± 0%, but none survived ≥ 100 µg/mL for 7 days, 0% ± 0%. Fibrosis was seen adjacent to ALBC without inflammation or necrosis, indistinguishable from controls for both liposomal amphotericin B doses. Amphotericin B serum levels were all less than 1 µg/mL and WBC counts were all normal. CONCLUSIONS: In vitro cytotoxicity to liposomal amphotericin B occurred but no adverse tissue reaction was seen in vivo. CLINICAL RELEVANCE: Local delivery of liposomal amphotericin B in ALBC was well tolerated by mouse tissue; however, clinical studies are needed to confirm this finding in humans.

Design of Micelle Nanocontainers Based on PDMAEMA-b-PCL-b-PDMAEMA Triblock Copolymers for the Encapsulation of Amphotericin B.

The clinical application of amphotericin B (AmB), a broad spectrum antifungal agent, is limited by its poor solubility in aqueous medium and also by its proven renal toxicity. In this work, AmB was encapsulated in micelles obtained from the self-assembly of PDMAEMA-b-PCL-b-PDMAEMA triblock copolymers. The amount of encapsulated AmB depended on the copolymer composition, and short blocks of polycaprolactone (PCL) and poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) showed better performance. All the studied formulations exhibited a controlled release of AmB along 150 h. The formulations presented reduced hemotoxicity while maintaining antifungal activities against Candida albicans, Candida krusei, and Candida glabrata comparable with free AmB. A reduction on the hemotoxicity was found to be due to the slow release and subsequent low aggregation achieved with the use of polymer micelle nanocontainers.

Studies on Antifungal Properties of Methacrylamido Propyl Trimethyl Ammonium Chloride Polycations and Their Toxicity In Vitro.

The biological activity of polycations is usually associated with their biocidal properties. Their antibacterial features are well known, but in this work, observations on the antifungal properties of macromolecules obtained by methacrylamido propyl trimethyl ammonium chloride (MAPTAC) polymerization are presented. The results, not previously reported, make it possible to correlate antifungal properties directly with the structure of the macromolecule, in particular the molecular mass. The polymers described here have antifungal activity against some filamentous fungi. The strongest effect occurs for polymers with a mass of about 0.5 mDa which have confirmed activity against the multidrug-resistant species Scopulariopsis brevicaulis, Fusarium oxysporum, and Fusarium solani, as well as the dermatophytes Trichophyton mentagrophytes, Trichophyton rubrum, Trichophyton interdigitale, and Trichophyton tonsurans. In addition, this publication describes the effects of these macromolecular systems on serum and blood components and provides a preliminary assessment of toxicity on cell lines of skin-forming cells, i.e., fibroblasts and keratinocytes. Additionally, using a Franz diffusion chamber, a negligibly low transport of the active polymer through the skin was demonstrated, which is a desirable effect for externally applied antifungal drugs. IMPORTANCE Infectious diseases are a very big medical, social, and economic problem. Even before the COVID-19 pandemic, certain infections were among of the most common causes of death. The difficulties in the treatment of infectious diseases concern in particular fungal diseases, against which we have only a few classes of drugs represented by a few substances. The publication presents the preliminary results of the in vitro antifungal activity studies of four MAPTAC polymers on different fungal species and their cytotoxicity to human cells (fibroblasts and keratinocytes). The paper also compares these properties with analogous ones of two commonly used antifungal drugs, ciclopirox and terbinafine.

Cytotoxicity and antimicrobial activity of isolated compounds from Monsonia angustifolia and Dodonaea angustifolia.

ETHNOPHARMACOLOGICAL RELEVANCE: Monsonia angustifolia is traditionally used to treat anthrax, heartburn, diarrhea, eye infections and hemorrhoids. Dodonaea angustifolia is frequently used as a treatment for dental pain, microbial infections and jungle fever. The two plant species were selected due to the presence of secondary metabolites such as coumarins, flavonoids, terpenoids, saponins and polyphenolics from the crude extracts, which exhibit pharmacological significance. The pure isolated compounds from the crude extracts are known for their diverse structures and interesting pharmacophores. AIM: To isolate and identify antibacterial and antifungal chemical constituents from Monsonia angustifolia and Dodonaea angustifolia plant extracts and evaluate the cytotoxicity of pure compounds from the crude extracts. MATERIALS AND METHODS: Extractives from M. angustifolia and D. angustifolia plants were isolated using chromatographic techniques and structures were elucidated based on NMR, IR and MS spectroscopic techniques. A microplate serial dilution method was used to evaluate the antibacterial activity of extracts and pure compounds against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and antifungal activity against Candida albicans and Cryptococcus neoformans. The cytotoxicity was determined using the 3-(4, 5-dimethylthiazol)-2, 5-diphenyl tetrazolium bromide (MTT) assay. RESULTS: The dichloromethane, ethyl acetate and methanol crude extracts from the plants exhibited significant inhibition of microbial growth. The phytochemical investigation of these active crude extracts led to the isolation of five pure active compounds, 5-methoxyjusticidin A (1), cis-phytyl diterpenoidal fatty acid ester (2), stigmasterol (3), ß-sitosterol (4) and 5-hydroxy-7,4'-dimethoxyflavone (5). Stigmasterol (3) showed good antifungal activity against Cryptococcus neoformans with a minimum inhibition concentration (MIC) of 25 µg/mL and Candida albicans (MIC = 50 µg/mL). CONCLUSION: Compounds (1-5) isolated from Monsonia angustifolia and Dodonaea angustifolia showed antibacterial and antifungal activities and were non-toxic against Madin-Darby canine kidney (MDCK) cells and VERO monkey kidney (VERO) cells.

Silver nanoparticles: influence of stabilizing agent and diameter on antifungal activity against Candida albicans and Candida glabrata biofilms.

AIM: The purpose of this work was to evaluate the size-dependent antifungal activity of different silver nanoparticles (SN) colloidal suspensions against Candida albicans and Candida glabrata mature biofilms. METHODS AND RESULTS: The research presented herein used SN of three different average sizes (5, 10 and 60 nm), which were synthesized by the reduction of silver nitrate through sodium citrate and which were stabilized with ammonia or polyvinylpyrrolidone. Minimal inhibitory concentration (MIC) assays were performed using the microdilution methodology. The antibiofilm activity of SN was determined by total biomass quantification (by crystal violet staining) and colony forming units enumeration. MIC results showed that all SN colloidal suspensions were fungicidal against the tested strains at very low concentrations (0·4-3·3 µg ml(-1) ). With regard to biomass quantification, SN colloidal suspensions were very effective only against C. glabrata biofilms, achieving biomass reductions around 90% at a silver concentration of 108 µg ml(-1) . In general, all SN suspensions promoted significant log(10) reduction of the mean number of cultivable biofilm cells after exposure to silver concentrations at or higher than 108 µg ml(-1) . Moreover, the results showed that the particle size and the type of stabilizing agent used did not interfere in the antifungal activity of SN against Candida biofilms. CONCLUSIONS: This study suggests that SN have antifungal therapeutic potential, but further studies are still required namely regarding formulation and delivery means. SIGNIFICANCE AND IMPACT OF THE STUDY: SN may contribute to the development of new strategies for the improvement of oral health and quality of life particularly of the complete denture wearers.

Physicochemical surrogates for in vitro toxicity assessment of liposomal amphotericin B.

Pharmaceutical toxicity evaluations often use in vitro systems involving primary cells, cell lines or red blood cells (RBCs). Cell-based analyses ('bioassays') can be cumbersome and typically rely on hard-to-standardize biological materials. Amphotericin B (AmB) toxicity evaluations are primarily based on potassium release from RBCs and share these limitations. This study evaluates the potential substitution of two physicochemical AmB toxicity approaches for the bioassay: Ultraviolet-visible spectroscopy (UV-vis) and in vitro drug release kinetics. UV-vis spectral analyses indicated that liposomal AmB's (L-AmB) main peak position (λmax) and peak ratio (OD346/OD322) are potential toxicity surrogates. Similarly, two first-order release parameters derived from USP-4 in vitro drug release analyses also provided linear relationships with toxicity. These were the initial, overall drug release rate and the ratio of loose to tight AmB pools. Positive slopes and high correlation coefficients (R2 > 0.9) characterized all interrelations between physicochemical parameters and toxicity. These tests converted the manufacturing variables' nonlinear (i.e., curvilinear) relationships with in vitro toxicity to linear responses. Three different toxicity attenuation approaches (2 manufacturing, 1 formulation), covering formulation composition and process aspects, support this approach's universality. These data suggest that one or more spectral and kinetic physicochemical tests can be surrogates for L-AmB in vitro toxicity testing.

New nystatin-related antifungal polyene macrolides with altered polyol region generated via biosynthetic engineering of Streptomyces noursei.

Polyene macrolide antibiotics, including nystatin and amphotericin B, possess fungicidal activity and are being used as antifungal agents to treat both superficial and invasive fungal infections. Due to their toxicity, however, their clinical applications are relatively limited, and new-generation polyene macrolides with an improved therapeutic index are highly desirable. We subjected the polyol region of the heptaene nystatin analogue S44HP to biosynthetic engineering designed to remove and introduce hydroxyl groups in the C-9-C-10 region. This modification strategy involved inactivation of the P450 monooxygenase NysL and the dehydratase domain in module 15 (DH15) of the nystatin polyketide synthase. Subsequently, these modifications were combined with replacement of the exocyclic C-16 carboxyl with the methyl group through inactivation of the P450 monooxygenase NysN. Four new polyene macrolides with up to three chemical modifications were generated, produced at relatively high yields (up to 0.51 g/liter), purified, structurally characterized, and subjected to in vitro assays for antifungal and hemolytic activities. Introduction of a C-9 hydroxyl by DH15 inactivation also blocked NysL-catalyzed C-10 hydroxylation, and these modifications caused a drastic decrease in both antifungal and hemolytic activities of the resulting analogues. In contrast, single removal of the C-10 hydroxyl group by NysL inactivation had only a marginal effect on these activities. Results from the extended antifungal assays strongly suggested that the 9-hydroxy-10-deoxy S44HP analogues became fungistatic rather than fungicidal antibiotics.

In vitro antifungal activity and toxicity of itraconazole in DMSA-PLGA nanoparticles.

Itraconazole (ITZ) is a drug used to treat various fungal infections and may cause side effects. The aim of this study was to develop and evaluate the in vitro activity of DMSA-PLGA nanoparticles loaded with ITZ against Paracoccidioides brasiliensis, as well as their cytotoxicity. Nanoparticles were prepared using the emulsification-evaporation technique and characterized by their encapsulation efficiency, morphology (TEM), size (Nanosight) and charge (zeta potential). Antifungal efficacy in P. brasiliensis was determined by minimal inhibition concentration (MIC), and cytotoxicity using MTT assay. ITZ was effectively incorporated in the PLGA-DMSA nanoparticles with a loading efficiency of 72.8 +/- 3.50%. The shape was round with a solid polymeric structure, and a size distribution of 174 +/- 86 nm (Average +/- SD). The particles were negatively charged. ITZ-NANO presented antifungal inhibition (MIC = 6.25 ug/mL) against P. brasiliensis and showed lower in vitro cytotoxicity than free drug (ITZ).

Anti-fungal effect of Hevea brasiliensis latex C-serum on Aspergillus niger.

OBJECTIVES: Hevea brasiliensis extract could potentially be employed as a relatively low cost resource for various anti-fungal activities due to the simplicity of latex preparation and the abundance of latex that can be obtained in rubber producing regions. The present study was aimed at examining the species specific anti-fungal property of H. brasilensis latex C-serum against Aspergillus niger. RESULTS: The results showed that the latex C-serum exerted a specific antifungal activity against Aspergillus niger, but not Candida albicans. Low toxicity of the C-serum was demonstrated in Brine Shrimp Lethality Test (BSLT) with an LC50 value of 98.4 mg/ml. CONCLUSIONS: Pending further more elaborated investigations, H. brasiliensis latex C-serum, with its species specific anti-fungal and cancer-origin cell line specific anti-proliferation properties, would probably contribute in healthcare in addition to its traditional role in polymer industry.