Chemical Recycling and Physical Tuning of Necklace-Shaped Polydimethylsiloxanes Bearing Anthracene Dimer Units.

The problem of plastic waste in the environment calls for the development of new polymeric materials designed specifically for easy recycling at the end of their life cycle. Herein, a green polymer system comprising a series of necklace-shaped polydimethylsiloxanes bearing anthracene dimer units is developed. The polymers have low environmental impact and are easily recycled. Further, their flexibility and glass transition temperatures are easy to control. These necklace-shaped inorganic polymers are synthesized by photopolymerizing (dimerizing) anthracene-terminated oligo-dimethylsiloxane monomers. A key achievement of the present work is the successful chemical recovery of the monomers from the polymers through thermal depolymerization, enabling monomer-polymer recycling. By applying equilibrium polymerization with base catalysts, monomers with a controlled distributed chain length are synthesized from monomers with a constant chain length. The necklace-shaped polymers synthesized from these randomized monomers have amorphous structures and readily form transparent films. It is possible to modulate the thermal and mechanical properties of the polymers by controlling the average chain length of the polydimethylsiloxane between the anthracene dimers. This investigation presents a method for the synthesis and cyclic utilization of polymer materials with a wide range of applications, including plastics and elastomers.

Electrochromic Response Capability Enhancement with Pentiptycene-Incorporated Intrinsic Porous Polyamide Films.

Enhancing switching response capability of electrochromic (EC) polymers has been a topical issue. Herein, the H-shaped nonplanar pentiptycene scaffold is successfully introduced into the polyamide film derived from N,N'-bis(4-aminophenyl)-N,N'-di(methoxyphenyl)-1,4-phenylenediamine (TPPA), and the resulting copolymer shows enhanced EC behaviors, including lower oxidation potential and shorter switching response time, as compared to the corresponding TPPA-derived homopolymer.

On Demand Light-Degradable Polymers Based on 9,10-Dialkoxyanthracenes.

Light induced degradation of polymers has drawn increasing interest due to the need for externally controllable modulation of materials properties. However, the portfolio of polymers, that undergo precisely controllable degradation, is limited and typically requires UV light. A novel class of backbone-degradable polymers that undergo aerobic degradation in the presence of visible light, yet remain stable against broad-spectrum light under anaerobic conditions is reported. In this design, the polymer backbone is comprised of 9,10-dialkoxyanthracene units that are selectively cleaved by singlet oxygen in the presence of green light as confirmed by NMR and UV/vis spectroscopy. The resulting polymers have been processed by electrohydrodynamic (EHD) co-jetting into bicompartmental microfibers, where one hemisphere is selectively degraded on demand.

Biotin anchored nanostructured lipid carriers for targeted delivery of doxorubicin in management of mammary gland carcinoma through regulation of apoptotic modulator.

Mammary gland tumour has the highest incidence rate and mortality in women, worldwide. The present study envisaged a molecularly targeted nanostructured lipid carrier (NLCs) for doxorubicin (Dox) delivery capable of inducing cellular apoptosis in mammary gland tumour. NLCs were prepared utilizing Perilla frutescens oil (54-69% ω3-fatty acid) as liquid lipid to enhance entrapment of Dox through molecular ion pairing. Biotin decorated NLCs (b-Dox-NLCs) were evaluated in vitro and in vivo. The b-Dox-NLCs showed particle size of 105.2 ± 3.5 nm, zeta potential -35 ± 2 mV, entrapment 99.15 ± 1.71%, drug content 19.67 ± 2.6 mg.g-1, biotin content 5.85 ± 0.64 µg.g-1 and drug release 98.67 ± 2.43% (facilitated by acidic microenvironment) respectively. MTT assay and Flow cytometric analysis revealed higher anti-proliferative capability of b-Dox-NLCs to force apoptosis in MCF-7 cell line vis-à-vis marketed Dox, evidenced by reactive oxygen species level and mitochondrial membrane potential mediated apoptosis. Enhanced antitumor targeting, therapeutic safety and efficacy was exhibited by b-Dox-NLCs, as investigated through tumour volume, animal survival, weight variation, cardiotoxicity and biodistribution studies in 7,12-Dimethylbenz[a]anthracene induced mammary gland tumour. Immunoblotting assay demonstrated b-Dox-NLCs downregulated anti-apoptotic proteins, i.e. bcl-2, MMP-9 while upregulated pro-apoptotic proteins, i.e. caspase-9, p16 and BAX. The experimental results suggest that biotinylated ω3-fatty acid augmented NLCs loaded with Dox are capable of inducing programmed cell death in mammary tumour and can be utilized as safe and effective delivery system with enhanced potential for mammary gland carcinoma therapy.

Influence of Polymer Charge on the Localization and Dark- and Photo-Induced Toxicity of a Potential Type I Photosensitizer in Cancer Cell Models.

A current trend within photo-dynamic therapy (PDT) is the development of molecular systems targeting hypoxic tumors. Thus, type I PDT sensitizers could here overcome traditional type II molecular systems that rely on the photo-initiated production of toxic singlet oxygen. Here, we investigate the cell localization properties and toxicity of two polymeric anthracene-based fluorescent probes (neutral Ant-PHEA and cationic Ant-PIm). The cell death and DNA damage of Chinese hamster ovary cancer cells (CHO-K1) were characterized as combining PDT, cell survival studies (MTT-assay), and comet assay. Confocal microscopy was utilized on samples incubated together with either DRAQ5, Lyso Tracker Red, or Mito Tracker Deep Red in order to map the localization of the sensitizer into the nucleus and other cell compartments. While Ant-PHEA did not cause significant damage to the cell, Ant-PIm showed increased cell death upon illumination, at the cost of a significant dark toxicity. Both anthracene chromophores localized in cell compartments of the cytosol. Ant-PIm showed a markedly improved selectivity toward lysosomes and mitochondria, two important biological compartments for the cell's survival. None of the two anthracene chromophores showed singlet oxygen formation upon excitation in solvents such as deuterium oxide or methanol. Conclusively, the significant photo-induced cell death that could be observed with Ant-PIm suggests a possible type I PDT mechanism rather than the usual type II mechanism.

Diels-Alder Additions as Mechanistic Probes-Interception of Silyl-Isoindenes: Organometallic Derivatives of Polyphenylated Cycloheptatrienes and Related Seven-Membered Rings.

The intermediacy of short-lived isoindenes, generated in the course of metallotropic or silatropic shifts over the indene skeleton, can be shown by Diels-Alder trapping with tetracyanoethylene, leading to the complete elucidation of the dynamic behaviour of a series of polyindenylsilanes. Cyclopentadienones, bearing ferrocenyl and multiple phenyl or naphthyl substituents undergo [4 + 2] cycloadditions with diaryl acetylenes or triphenylcyclopropene to form the corresponding polyarylbenzenes or cycloheptatrienes. The heptaphenyltropylium cation, [C7Ph7+], was shown to adopt a nonplanar shallow boat conformation. In contrast, the attempted Diels-Alder reaction of tetracyclone and phenethynylfluorene yielded electroluminescent tetracenes. Finally, benzyne addition to 9-(2-indenyl)anthracene, and subsequent incorporation of a range of organometallic fragments, led to development of an organometallic molecular brake.

Dendron-Polymer Conjugate Based Cross-Linked Micelles: A Robust and Versatile Nanosystem for Targeted Delivery.

Among various nanomedicine platforms, biodegradable polymeric micelles offer a viable approach to targeted cancer therapy. Herein, we report fabrication of core-cross-linked micelles using dendron-polymer conjugates as building blocks. Hydrophobic polyester dendrons containing peripheral alkene groups are conjugated to a hydrophilic poly(ethylene glycol) based copolymer bearing activated ester groups for appending an amine-containing peptide based targeting group, namely, cRGDfK. Micellar constructs assembled in aqueous media were cross-linked using a tetra-thiol molecule via the photochemical thiol-ene reaction. Cross-linked and non-cross-linked micelles were compared in terms of their critical micellar concentration, stability, drug loading, and drug release characteristics. It was observed that the cross-linked micelles were stable upon excessive dilution compared to their non-cross-linked counterparts. Importantly, the amount of passive drug release in neutral pH was considerably lower for the cross-linked micellar systems. Furthermore, treatment of MDA-MB-231 breast cancer cells with nontargeted and targeted cross-linked micelles demonstrated higher internalization of the targeted construct. In corroboration, in vitro assay revealed that drug loaded targeted micelles possessed higher cytotoxicity than the nontargeted ones. Facile fabrication of this modular platform which can carry a desired therapeutic agent and be conjugated with appropriate targeting units, along with the attributes necessary to serve as a viable drug delivery system, offers a platform with potential for addressing various challenges in the field of micellar drug delivery.

Fluorescence analysis of polyaromatic hydrocarbon photodegradation in the presence of polypropylene microfibers.

In this study, degradation of naphthalene and anthracene in water using ultraviolet (UV) light in the presence of polypropylene microfibers (PPM) modified with TiO2 was investigated using fluorescence analysis. KrCl (λrad  = 222 nm) and XeCl (λrad  = 308 nm) excilamps were used in a photoreactor. Phototransformation was studied for compounds in the presence of PPMs modified with TiO2 particles. The results indicated that the toxicants concentration was reduced by two orders of magnitude in the presence of PPMs. This reduction was due to effective adsorption of naphthalene and anthracene from water onto the surface of the PPMs. Exposure to the toxicant-water-PPM system to UV light led to the formation of fluorescent photoproducts.

Mucoadhesive Polymeric Films to Enhance Barbaloin Penetration Into Buccal Mucosa: a Novel Approach to Chemoprevention.

Nowadays, chemoprevention by administering natural supplements is considered an attractive strategy to reverse, suppress, or prevent the evolution of premalignant oral lesions. In particular, Barbaloin exhibits anti-proliferative, anti-inflammatory, and anti-cancer properties, and it results useful in multi-therapy with classic chemotherapeutics. Therefore, in this work, mucoadhesive buccal films, as locoregional drug delivery system able to provide a targeted and efficient therapeutic delivery of Barbaloin, are proposed. Thus, Aloin extract-loaded Eudragit® RL100 or Eudragit® RS100-based buccal films were designed in order to obtain an easily self-administrable formulation capable of promoting Barbaloin penetration into buccal mucosa and assuring high patient compliance. Large amounts of extract (44%) were loaded into the polymer matrix and six formulations were prepared varying polymers and plasticizers ratios. For all formulations, physical form (thermogravimetric analysis-differential scanning calorimetry, TGA-DSC), swelling degree, mucoadhesiveness, drug release, and ability to promote drug penetration in mucosa have been investigated. After a sequential selection process, Eudragit RS 100-based film, with low PVP and high plasticizers amounts, emerged as the most promising. It results appropriately flexible, uniform in terms of weight, thickness and drug content, as well as characterized by suitable surface pH, good mucoadhesiveness, and low swelling degree. It displays a Higuchian drug release behavior up to 89% of Barbaloin released, thus demonstrating that diffusion through the matrix is the main release mechanism. Remarkable penetration enhancer properties of film were demonstrated by evidence of Barbaloin accumulation into buccal mucosa up to 10-fold higher than those obtained following administration of Aloin solution.

A pH-Sensing Optode for Mapping Spatiotemporal Gradients in 3D Paper-Based Cell Cultures.

Paper-based cultures are an emerging platform for preparing 3D tissue-like structures. Chemical gradients can be imposed upon these cultures, generating microenvironments similar to those found in poorly vascularized tumors. There is increasing evidence that the tumor microenvironment is responsible for promoting drug resistance and increased invasiveness. Acidosis, or the acidification of the extracellular space, is particularly important in promoting these aggressive cancer phenotypes. To better understand how cells respond to acidosis there is a need for 3D culture platforms that not only model relevant disease states but also contain sensors capable of quantifying small molecules in the extracellular environment. In this work, we describe pH-sensing optodes that are capable of generating high spatial and temporal resolution maps of pH gradients in paper-based cultures. This sensor was fabricated by suspending microparticles containing pH-sensitive (fluorescein) and pH-insensitive (diphenylanthracene) dyes in a polyurethane hydrogel, which was then coated onto a transparent film. The pH-sensing films have a fast response time, are reversible, stable in long-term culture environments, have minimal photobleaching, and are not cytotoxic. These films have a pKa of 7.61 ± 0.04 and are sensitive in the pH range corresponding to normal and tumorigenic tissues. With these optodes, we measured the spatiotemporal evolution of pH gradients in paper-based tumor models.

Barbaloin loaded polydopamine-polylactide-TPGS (PLA-TPGS) nanoparticles against gastric cancer as a targeted drug delivery system: Studies in vitro and in vivo.

Gastric cancer is the third leading cause of cancer-associated death worldwide. Although a decrease in its incidence is observed, gastric cancer still poses a major clinical challenge due to poor prognosis and limited treatments. Barbaloin (BBL) is a main medicinal composition of the Chinese traditional medicine aloe vera. BBL has various bioactivities, including anti-oxidant, anti-inflammatory and anti-tumor properties. Polydopamine (pD)-based surface modification is easy to functionalize polymeric nanoparticles (NPs) surfaces with ligands and/or additional polymeric layers. In the present study, BBL-loaded formulations was developed with pD-modified NPs, which was synthesized by polylactide-TPGS (PLA-TPGS) (pD-PLA-TPGS/NPs). And galactosamine (Gal) was conjugated on the prepared NPs (Gal-pD-PLA-TPGS/NPs) for targeting the gastric cancer cells. Here, we found that BBL-loaded Gal-pD-PLA-TPGS/NPs showed the highest cellular uptake efficacy in gastric cancer cells. Gal-pD-PLA-TPGS/NPs more significantly reduced the gastric cancer cell viability. Further, greater apoptosis, autophagy and ROS generation was induced by Gal-pD-PLA-TPGS/NPs in gastric cancer cells. Additionally, compared to the other two NPs, Gal-pD-PLA-TPGS/NPs most markedly decreased ATP levels in gastric cancer cells. In vivo, Gal-pD-PLA-TPGS/NPs were specifically targeted to tumor site. Moreover, Gal-pD-PLA-TPGS/NPs exhibited the most anti-tumor effects, as evidenced by the lowest tumor volume and tumor weight. Of note, there was no significant difference was observed in body and liver weight, as well as the histological changes in major organs isolated from each group of mice. Together, the findings indicated that BBL-loaded Gal-pD-PLA-TPGS/NPs could be targeted to gastric cancer cells to suppress tumor progression without toxicity.

Catenane Crosslinked Mechanically Adaptive Polymer Gel.

A new strategy is introduced to prepare an adaptive polymer gel that has a unique adaptability in response to environmental stimuli. This gel is prepared by the thiol-ene "click" reaction between a bisvinyl [2]catenane and a poly(ethylene glycol) derivative containing multiple thiol groups. The catenane crosslinker is responsive to external stimuli due to the existence of intercomponent hydrogen bonding (IHB). The strong IHB restricts the rotation and movement of the crosslinker, giving it a rigid feature; however, the crosslinker becomes flexible when the IHB is destroyed. In consequence, the resulting gel can be reversibly switched between tough and soft states under stimulations.

Recent Advances in Cyclodextrin-Based Light-Responsive Supramolecular Systems.

Cyclodextrins (CDs), one of the host molecules in supramolecular chemistry, can host guest molecules to form inclusion complexes via non-covalent and reversible host-guest interactions. CD-based light-responsive supramolecular systems are typically constructed using CDs and guest molecules with light-responsive moieties, including azobenzene, arylazopyrazole, o-nitrobenzyl ester, pyrenylmethyl ester, coumarin, and anthracene. To date, numerous efforts have been reported on the topic of CD-based light-responsive supramolecular systems, but these have not yet been highlighted in a separated review. This review summarizes the efforts reported over the past ten years. The main text of this review is divided into five sections (vesicles, micelles, gels, capturers, and nanovalves) according to the formation of self-assemblies. This feature article aims to afford a comprehensive understanding of the light-responsive moieties used in the construction of CD-based light-responsive supramolecular systems and to provide a helpful guide for the further design of CD-based light-responsive supramolecular systems.

Micellar Stability in Biological Media Dictates Internalization in Living Cells.

The dynamic nature of polymeric assemblies makes their stability in biological media a crucial parameter for their potential use as drug delivery systems in vivo. Therefore, it is essential to study and understand the behavior of self-assembled nanocarriers under conditions that will be encountered in vivo such as extreme dilutions and interactions with blood proteins and cells. Herein, using a combination of fluorescence spectroscopy and microscopy, we studied four amphiphilic PEG-dendron hybrids and their self-assembled micelles in order to determine their structure-stability relations. The high molecular precision of the dendritic block enabled us to systematically tune the hydrophobicity and stability of the assembled micelles. Using micelles that change their fluorescent properties upon disassembly, we observed that serum proteins bind to and interact with the polymeric amphiphiles in both their assembled and monomeric states. These interactions strongly affected the stability and enzymatic degradation of the micelles. Finally, using spectrally resolved confocal imaging, we determined the relations between the stability of the polymeric assemblies in biological media and their cell entry. Our results highlight the important interplay between molecular structure, micellar stability, and cell internalization pathways, pinpointing the high sensitivity of stability-activity relations to minor structural changes and the crucial role that these relations play in designing effective polymeric nanostructures for biomedical applications.

Dendrons and Multiarm Polymers with Thiol-Exchangeable Cores: A Reversible Conjugation Platform for Delivery.

Disulfide exchange reaction has emerged as a powerful tool for reversible conjugation of proteins, peptides and thiol containing molecules to polymeric supports. In particular, the pyridyl disulfide group provides an efficient handle for the site-specific conjugation of therapeutic peptides and proteins bearing cysteine moieties. In this study, novel biodegradable dendritic platforms containing a pyridyl disulfide unit at their focal point were designed. Presence of hydroxyl groups at the periphery of these dendrons allows their elaboration to multivalent initiators that yield poly(ethylene glycol) based multiarm star polymers via controlled radical polymerization. The pyridyl disulfide unit at the core of these star polymers undergoes efficient reaction with thiol functional group containing molecules such as a hydrophobic dye, namely, Bodipy-SH, glutathione, and KLAK sequence containing peptide. While conjugation of the hydrophobic fluorescent dye to the PEG-based multiarm polymer renders it water-soluble, it can be cleaved off the construct through thiol-disulfide exchange in the presence of an external thiol such as dithiothreitol. The multiarm polymer was conjugated with a thiol group containing apoptotic peptide to increase its solubility and cellular transport. In vitro cytotoxicity and apoptosis assays demonstrated that the resultant peptide-polymer conjugate had almost five times more apoptotic potential primarily through triggering apoptosis by disrupting mitochondrial membranes of human breast cancer cell line (MDA-MB-231) compared to naked peptide. The novel dendritic platform disclosed here offers an attractive template that can be modified to multiarm polymeric constructs bearing a "tag and release" characteristic.

Synthesis and Characterization of a Novel Microporous Dihydroxyl-Functionalized Triptycene-Diamine-Based Polyimide for Natural Gas Membrane Separation.

An intrinsically microporous polyimide is synthesized in m-cresol by a one-pot high-temperature condensation reaction of 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and newly designed 2,6 (7)-dihydroxy-3,7(6)-diaminotriptycene (DAT1-OH). The 6FDA-DAT1-OH polyimide is thermally stable up to 440 °C, shows excellent solubility in polar solvents, and has moderately high Brunauer-Teller-Emmett (BET) surface area of 160 m2 g-1 , as determined by nitrogen adsorption at -196 °C. Hydroxyl functionalization applied to the rigid 3D triptycene-based diamine building block results in a polyimide that exhibits moderate pure-gas CO2 permeability of 70 Barrer combined with high CO2 /CH4 selectivity of 50. Mixed-gas permeation studies demonstrate excellent plasticization resistance of 6FDA-DAT1-OH with impressive performance as potential membrane material for natural gas sweetening with a CO2 permeability of 50 Barrer and CO2 /CH4 selectivity of 40 at a typical natural gas well partial pressure of 10 atm.

Synthesis of Responsive Two-Dimensional Polymers via Self-Assembled DNA Networks.

Despite a growing interest in two-dimensional polymers, their rational synthesis remains a challenge. The solution-phase synthesis of a two-dimensional polymer is reported. A DNA-based monomer self-assembles into a supramolecular network, which is further converted into the covalently linked two-dimensional polymer by anthracene dimerization. The polymers appear as uniform monolayers, as shown by AFM and TEM imaging. Furthermore, they exhibit a pronounced solvent responsivity. The results demonstrate the value of DNA-controlled self-assembly for the formation of two-dimensional polymers in solution.

Combretastatin A-4 Conjugated Antiangiogenic Micellar Drug Delivery Systems Using Dendron-Polymer Conjugates.

Employment of polymeric nanomaterials in cancer therapeutics is actively pursued since they often enable drug administration with increased efficacy along with reduced toxic side effects. In this study, drug conjugated micellar constructs are fabricated using triblock dendron-linear polymer conjugates where a hydrophilic linear polyethylene glycol (PEG) chain is flanked by well-defined hydrophobic biodegradable polyester dendrons bearing an antiangiogenic drug, combretastatin-A4 (CA4). Variation in dendron generation is utilized to obtain a library of micellar constructs with varying sizes and drug loadings. In particular, a family of drug appended dendron-polymer conjugates based on polyester dendrons of generations ranging from G1 to G3 and 10 kDa linear PEG were obtained using [3 + 2] Huisgen type "click" chemistry. The final constructs benefit from PEG's hydrophilicity and antibiofouling character, as well as biodegradable nature of the hydrophobic polyester dendrons. The hydrophobic-hydrophilic-hydrophobic character of these constructs leads to the formation of flower-like micelles in aqueous media. In addition to generation-dependent subnanomolar range critical micelle concentrations, the resulting micelles possess hydrodynamic diameters suitable for passive tumor targeting through enhanced permeability and retention (EPR) effect; thereby they are suitable candidates as controlled drug delivery agents. For all constructs, in vitro cytotoxicities were investigated and inhibitory effect of Comb-G3-PEG on tube formation was shown on human umbilical vein endothelial cells (HUVECs).

Phase Transfer and Surface Functionalization of Hydrophobic Nanoparticle using Amphiphilic Poly(amino acid).

Functionalization of nanoparticles with chemical and biochemical is essential for their biomedical and other application. However, most of the high quality nanoparticles are hydrophobic in nature due to surfactant capping and their conversion into water-soluble functional nanoparticle via appropriate coating and conjugation chemistry is extremely critical issue. Here we report amphiphilic poly(amino acid)-based one-pot coating and conjugation approach that can transform hydrophobic nanoparticle into water-soluble nanoparticle functionalized with primary amine, thiol, and biomolecule. We have designed amphiphilic polyaspartimide that can anchor hydrophobic nanoparticle through octadecyl groups, leaving the polar polyethylene glycol and aspartimide groups exposed outwards. The aspartimide group is then reacted with primary amine containing chemical/biomolecule with the formation of water-soluble functional nanoparticle. This approach has been extended to different hydrophobic nanoparticles and biomolecules. The present approach has advantages over existing approaches as coating and functionalization can be performed in one pot and functional nanoparticles have <12 nm hydrodynamic size, high colloidal stability, and biocompartibility. This developed approach can be used to derive biocompatible nanobioconjugates for various biomedical applications.

Modification Pathways for Copoly(2-oxazoline)s Enabling Their Application as Antireflective Coatings in Photolithography.

Chromophore-functionalized copoly(2-oxazoline)s are successfully evaluated as bottom antireflective coatings (BARCs) in high-resolution photolithography. With respect to UV light sources used in photolithographic production routines, anthracene is chosen as a chromophore. For application as polymer in BARCs, the copolymer poly(2-ethyl-2-oxazolin)45 -stat-poly(2-dec-9'-enyl-2-oxazolin)20 -stat-poly(2-(3'-(1"-(anthracen-9-ylmethyl)-1",2",3"-triazol-4-yl)propyl)-2-oxazolin)35 can be synthesized by the Huisgen cycloaddition click reaction of the copolymer poly(2-ethyl-2-oxazolin)45 -stat-poly(2-dec-9'-enyl-2-oxazolin)20 -stat-poly(2-pent-4'-inyl-2-oxazolin)35 and the corresponding azide-functionalized anthracenes. These copolymers can be crosslinked by the thermally induced thiol-ene reaction involving the unsaturated C=C bonds of the poly(2-dec-9'-enyl-2-oxazoline) repetition units and a multifunctional thiol as crosslinker. Tests of this BARC in a clean room under production conditions reveal a significant decrease of the swing-curve of a chemically amplified positive photoresist by more than 50%, hence significantly increasing the resolution of the photoresist.