Clinical Outcomes After Polyurethane Meniscal Scaffolds Implantation Remain Stable Despite a Joint Space Narrowing at 10-Year Follow-Up.

PURPOSE: To report the clinical outcomes, radiologic evolution, and survivorship of a series of patients affected by the postmeniscectomy syndrome and treated with a polyurethane scaffold at a minimum 10-year follow-up. In addition, the radiologic evolution of these patients was also assessed. METHODS: All the patients operated on with a polyurethane meniscal scaffold implantation to treat postmeniscectomy syndrome from 2008 to 2011 were prospectively followed. Clinical evaluations and radiologic studies were assessed at the preoperative period, at 5-year follow-up, and at minimum 10-year follow-up. Clinical outcomes were based on patient-reported outcomes (e.g., the Knee injury and Osteoarthritis Outcome Score, International Knee Documentation Committee, Lysholm, and Tegner). Radiographical evaluation of the joint-space narrowing was done in the Rosenberg view. Failure was defined as patients who required surgery to remove the scaffold or those patients who needed surgery for a total or partial knee replacement. RESULTS: Twenty-one of 27 patients, with a mean age of 56 ± 9.8 years, were available for the final follow-up. The mean follow-up was 11.8 (range, 10-12.7) years. Six patients were lost to follow-up. All functional scores showed a significant improvement (P < .001) at the 5- and 10-year follow-up. The exception was the Tegner score, which remained stable. The joint-space width was maintained from the preoperative period (1.9 ± 1.2 mm) up to the 5-year follow-up (1.3 ± 1.5 mm, P = .3) and decreased by the last evaluation (0.6 ± 1.2 mm, P = .001) at the last follow-up. Two (9.5%) of 21 patients were converted to a total knee replacement during the study period. None of the other patients needed revision surgery during the study period. CONCLUSIONS: The polyurethane meniscal scaffold provides significant and stable pain relief over time and improved functional outcomes at a minimum of 10 years after surgery. However, degenerative changes progressed in the treated compartment, with a joint-space narrowing over the 10-year period. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Zirconium as a Promising Synovial Biomarker for Loose Cemented Knee Prosthesis.

BACKGROUND: Aseptic loosening is the most common mode of failure after total knee arthroplasty. Despite this, the diagnosis often remains challenging and mainly relies on imaging modalities. Until today, no biomarker exists to aid in diagnosing loosening of the implants. As zirconium (Zr) is often found in bone cement, where it serves as radiopacifier, this study aimed to establish Zr as a synovial biomarker for loosened cemented knee prostheses. METHODS: A total of 31 patients scheduled for revision of a cemented knee prostheses were included. In all patients, the initial used cement contained Zr. After arthrotomy, specimens of synovial fluid were taken and levels of Zr were measured by inductively coupled plasma mass spectrometry. Depending on the necessary amount of force for explantation, the implants were graded "loose" or "well-fixed". Preoperative radiographs were evaluated by 2 independent physicians. RESULTS: The concentration of Zr in the synovial fluid differed significantly (P < .001) between the "loose" (mean 170.9 µg/L, range 0 to 1941 µg/L) and the "well-fixed" (mean 0.6 µg/L, range 0 to 6 µg/L) implants. The receiver operating characteristic analysis revealed 0.25 µg/l as an optimal cutoff value leading to a sensitivity of 0.84, a specificity of 0.92, a positive predictive value of 0.94, and a negative predictive value of 0.79. There was no significant difference in the diagnostic performance compared to radiographs (P = .66). CONCLUSIONS: Zirconium proved to be a reliable novel synovial biomarker for diagnosing aseptic loosening of knee prothesis fixed with cement containing Zr. This biomarker should not be interpreted in isolation, but in combination with existing diagnostic tools.

No changes in bone mineral density following total knee arthroplasty using an all-polyethylene tibial component.

PURPOSE: Polyethylene particles produced from metal-backed tibial (MBT) implants are understood to contribute to bone loss and component loosening. This, along with advanced surgical techniques, improved materials and increasing costs, has renewed interest in all-polyethylene tibias (APTs). We investigated peri-APT bone mineral density (BMD) in patients, expecting to find no differences between two post-operative values. METHODS: Patients over 65 years, with BMI ≤ 37.5 kg/m2 and no previous joint replacements were recruited to have computer-navigated total knee arthroplasty using an APT. The study cohort (n = 27) had mean age of 71.9 (SD 4.35) and BMI of 31.2 (SD 3.8). The BMD examinations were performed 6 weeks and 18 months post-operatively. Six regions of interest (ROI) were identified on anterior/posterior and lateral dual-energy X-ray absorptiometry scans. For each ROI, BMD relative differences (RDs) were determined between limbs and RDs at the two time points were compared. RESULTS: No differences were found between the RDs for any ROI. No revisions or complications were reported. At 18 months post-operatively, 79.2% of the cohort were very satisfied or satisfied with the outcome of their surgery and Oxford Knee Scores improved significantly compared to pre-operatively (p < 0.001). Mean knee range of motion was 102° (SD 10.7°), and mean leg alignment was 2.0° valgus (1-6°valgus). CONCLUSION: Results from BMD analysis suggest that implants were well fixated without compromising function. We believe that using APTs with computer navigation is a viable cheaper option to MBTs for patients who are less active, have lower BMI and good bone quality.

Magnetic resonance imaging of the knee for chronological age estimation-a systematic review.

INTRODUCTION: Radiographs of the hand and teeth are frequently used for medical age assessment, as skeletal and dental maturation correlates with chronological age. These methods have been criticized for their lack of precision, and magnetic resonance imaging (MRI) of the knee has been proposed as a more accurate method. The aim of this systematic review is to explore the scientific and statistical evidence for medical age estimation based on skeletal maturation as assessed by MRI of the knee. MATERIALS AND METHODS: A systematic review was conducted that included studies published before April 2021 on living individuals between 8 and 30 years old, with presumptively healthy knees for whom the ossification stages had been evaluated using MRI. The correlation between "mature knee" and chronological age and the risk of misclassifying a child as an adult and vice versa was calculated. RESULTS: We found a considerable heterogeneity in the published studies -in terms of study population, MRI protocols, and grading systems used. There is a wide variation in the correlation between maturation stage and chronological age. CONCLUSION: Data from published literature is deemed too heterogenous to support the use of MRI of the knee for chronological age determination. Further, it is not possible to assess the sensitivity, specificity, negative predictive value, or positive predictive value for the ability of MRI to determine whether a person is over or under 18 years old. KEY POINTS: • There is an insufficient scientific basis for the use of magnetic resonance imaging of the knee in age determination by skeleton. • It is not possible to assess the predictive value of MRI of the knee to determine whether a person is over or under 18 years of age.

Magnetic resonance imaging of the knee anteromedial quadrant.

OBJECTIVE: This study aims to evaluate the possibility of characterizing an extra-articular thickening in the knee anteromedial quadrant in routine MRI scans. MATERIALS AND METHODS: Firstly, in a pilot study, for a better understanding of this extra-articular thickening trajectory in MRI, polytetrafluoroethylene (PTFE) tubes were attached to the ligament structure topography in two dissected pieces. Afterward, 100 knee MRI studies were randomly selected from our database, and 97 met the inclusion criteria. Two musculoskeletal radiologists interpreted the exams separately. Both had previously studied the ligament in the cadaveric knee MRI with the PTFE tube. RESULTS: The intraobserver and interobserver agreement for the ligament identification was calculated using Cohen's Kappa coefficient. The first radiologist identified the structure in 41 of the 97 scans (42.2%), and the second radiologist in 38 scans (39.2%). The interobserver agreement was substantial, with a Kappa of 0.68 and an agreement of 84.5%. The results suggest that this extra-articular thickening, recently called Anterior Oblique Ligament (AOL) in the literature, is a structure that can be frequently visualized on MRI scans with a high level of interobserver agreement in a relatively large number of exams. CONCLUSION: Therefore, this study indicates that MRI is a promising method for evaluating this anteromedial thickening, and it may be used for future studies of the Anterior Oblique Ligament.

Medially congruent total knee arthroplasty in valgus knee deformities yields satisfactory outcomes: a multicenter, international study.

PURPOSE: Postoperative instability represents one of the most common complications following primary total knee arthroplasty (TKA). To prevent this outcome, valgus deformities have been historically treated using more constrained implants. The purpose of this study was to evaluate the outcome of treating a moderate valgus deformity by combining a surgical technique used to release the postero-lateral soft tissue envelope with the use of a medially congruent (MC) TKA design without using classical, semi-constrained inserts. METHODS: Seventy-nine MC TKAs were performed by three surgeons at three institutions between 2016 and 2018 as part of a multicenter, international study. Inclusion criteria were: radiographic late-stage osteoarthritic knees with Ranawat's type 1 or 2 classification of valgus deformity and integrity of the medial capsular-ligament complex (less than 10 mm of medial opening during valgus stress test at 10° of knee flexion). Exclusion criteria were: BMI > 40; neuromuscular, metabolic, or immunologic disorders; or the inability to complete outcome measures or radiographic assessment. RESULTS: Seventy-seven patients (79 knees), 59 males and 18 females, were evaluated at 2-year minimum follow-up according to the Knee Society Score (KSS) and Forgotten Joint Score (FJS). Mean age at surgery was 70 years (range 48-91). The mean range of motion (ROM) improved from 110° (range 85°-130°) preoperatively to 121° (range 105°-135°) (p < 0.001) at the time of the last follow-up. Preoperative knee extension significantly improved from 3° (range - 15° to 20°) to 1° (range - 5° to 5°) of flexion at the last follow-up in all the patients. KSS and KSS Functional scores were 89 (range 65-100) and 82 points (range 55-100), respectively. The FJS obtained at the last follow-up was 72 (range 49-88). Two patients (2.5%) had major postoperative complications (one periprosthetic joint infection; one postoperative patellar fracture) requiring surgical interventions. CONCLUSIONS: In different surgeon's hands, the use of a modern medially congruent TKA design yielded good clinical outcomes at 2 years in a consecutive series of TKA in valgus arthritic knees. Postoperative instability was not recorded in this series and this finding was related to the high conformity design of the MC polyethylene insert, which significantly differs from classical posterior-stabilized (PS) designs. LEVEL OF EVIDENCE: IV.

Are There More Radiolucent Lines in Patients Who Underwent Total Knee Arthroplasty With or Without a Tourniquet During Cementation at 5 to 8 Years After Surgery?

BACKGROUND: This study investigated the presence and progression of radiolucent lines (RLLs) after cemented total knee arthroplasty (TKA) with or without tourniquet use. METHODS: There were 369 consecutive primary cemented TKAs with 5 to 8 years of follow-up. A tourniquet was used during component cementation in patients who underwent surgery from January 3, 2006, to March 31, 2010. No tourniquet was used from August 14, 2009, to October 14, 2014. There were 192 patients in the tourniquet group (TQ) and 177 patients in the no tourniquet group (NQ). Patient demographics, reoperations, and complications were recorded. RLLs were identified on anteroposterior, lateral, and skyline x-rays at 1, 2, and 5 to 8 years postoperatively using the modern knee society radiographic evaluation system. Demographics, reoperations, complications, and RLLs were compared. Age, sex, and body mass index were similar between groups. Mean tourniquet time in TQ was 11 minutes (range, 8 to 25). RESULTS: The presence of RLLs differed between groups, with 65% of TQ knees having RLLs under any part of the prostheses versus 46% of NQ knees (P < .001). The progression of RLL >2 mm occurred in 26.0% of knees in TQ and 16.7% of knees in NQ (P = .028). There were 13 TKAs that underwent subsequent revision surgery. There was no statistically or clinically significant difference in revision rate between groups (7 revisions in TQ, 6 in NQ, P = .66). CONCLUSION: Less RLLs were identified in NQ versus TQ. There were no statistically or clinically significant differences in revision rates between the NQ and TQ groups at 5 to 8 years.

Is Highly Cross-Linked Polyethylene Safe for Use in High-Flexion Posterior Stabilized Total Knee Arthroplasty?

BACKGROUND: Application of highly cross-linked polyethylene (HXLPE) to a posterior cruciate-substituting total knee arthroplasty (TKA) might add the risk of fracture and failure of the tibial polyethylene insert. The purpose of this study is to evaluate the long-term (up to 19 years) clinical and radiographic results of posterior cruciate-substituting TKAs with HXLPE or conventional polyethylene. METHODS: This study analyzed the results of 1,217 patients (444 men and 773 women; mean age of 65 ± 7 years, range, 31-85) (2,434 knees) who had received a NexGen LPS-Flex prosthesis with a conventional tibial insert in one knee and the same prosthesis with an HXLPE tibial insert in the contralateral knee. The mean duration of follow-up was 17 years (range, 15-19). RESULTS: The 2 groups did not differ significantly (P > .05) with regard to the clinical and radiographic results. No knee in either group had a fracture of the tibial polyethylene post or failure of the locking mechanism of the tibial polyethylene insert or osteolysis. Twenty-eight knees (2.3%) in the HXLPE group and 26 knees (2.1%) in the conventional polyethylene group were revised. The estimated survival rate at 17 years was 97.7% in the HXLPE group and 97.9% in the conventional polyethylene group. CONCLUSION: The data suggest that clinical and radiographic findings at a mean of 17 years after posterior cruciate-substituting TKA are the same for patients treated with HXLPE and those treated with conventional polyethylene.

Could Novel Radiographic Findings Help Identify Aseptic Tibial Loosening?

BACKGROUND: Aseptic loosening following total knee arthroplasty remains one of the leading causes of long-term failure. Radiographic identification of loose implants can be challenging with standard views. The purpose of this study was to compare the incidence of novel radiographic findings of anterior heterotopic bone formation and medial or lateral cyst formation in patients who have aseptic loosening to patients who have well-fixed implants. METHODS: A retrospective radiographic review was performed on 48 patients' revised secondary to aseptic tibial loosening. This cohort was compared to two additional cohorts; 48 patients returning for routine postoperative follow-up (control 1), and 48 patients revised secondary to infection or instability who had well-fixed implants (control 2). RESULTS: There were 41 of 48 (85%) patients who had implant loosening and were noted to have anterior heterotopic bone formation compared to 1 of 48 (2%) patients in control 1 and 3 of 48 (6%) patients in control 2 (P ≤ .0001). There were 43 of 48 (90%) patients who had implant loosening and had medial cyst formation compared to 3 of 48 (6%) patients in control 1 and 5 of 48 (10%) in control 2 (P ≤ .0001). There were 42 of 48 (88%) patients who had implant loosening and had lateral cyst formation compared to 2 of 48 (4%) patients in control 1 and 4 of 48 (8%) in control 2 (P ≤ .0001). CONCLUSION: In this study, we describe novel radiographic findings of anterior heterotopic bone formation and cysts that develop in patients who have aseptic loosening following primary total knee arthroplasty. We believe that these radiographic features may lead to easier identification of aseptic loosening.

Significantly Worse Fixation of Cemented Patellar Components on Multiacquisition Variable-Resonance Image Combination Magnetic Resonance Imaging Compared to Femoral and Tibial Components: A Cause for Concern?

BACKGROUND: The etiology of anterior knee pain after total knee arthroplasty (TKA) remains unclear. Few studies have examined patellar fixation quality. The purpose of the present study was to evaluate the patellar cement-bone interface after TKA on magnetic resonance imaging (MRI) and to correlate the patella fixation grade with the incidence of anterior knee pain. METHODS: We retrospectively reviewed 279 knees undergoing metal artifact reduction MRI for either anterior or generalized knee pain at least 6 months after cemented, posterior-stabilized TKA with patellar resurfacing with one implant manufacturer. MRI cement-bone interfaces and percent-integration of the patella, femur, and tibia were assessed by a fellowship-trained senior musculoskeletal radiologist. The grade and character of the patella interface were compared to the femur and tibia. Regression analyses were used to determine the association between patella integration with anterior knee pain. RESULTS: There were more patellar components with ≥75% zones of fibrous tissue (50%) compared to the femur (18%) or tibia (5%) (P < .001). There were a greater number of patellar implants with poor cement integration (18%) compared to the femur (1%) or tibia (1%) (P < .001). MRI findings showed more evidence of patellar component loosening (8%) compared to the femur (1%) or tibia (1%) (P < .001). Anterior knee pain was correlated with worse patella cement integration (P = .01), with women predicted to have better integration (P < .001). CONCLUSION: The quality of the patellar cement-bone interface after TKA is worse compared to the femoral or tibial component interface. Poor patellar cement-bone interface may be a source of anterior knee pain after TKA, but further investigation is required.

All-polyethylene versus metal-backed tibial components in total knee arthroplasty: a meta-analysis of randomized controlled trials.

OBJECTIVES: The design of tibial trays for total knee arthroplasty (TKA) has been a topic of research for several decades. Although all-polyethylene trays were developed to address issues such as osteolysis and to enhance the longevity of the prosthesis, as well as knee range of motion, metal-backed designs have remained the most commonly used type of prosthesis. This meta-analysis aimed to compare the clinical, radiological, and survival outcomes of both designs. METHODS: Five databases were searched from inception until October 1, 2020, for randomized controlled trials (RCTs) that compared the outcomes of all-polyethylene and metal-backed tibial components in TKA. The outcomes of interest included range of motion, knee society score, stairs climbing scores, radiostereographic analysis, survivorship and complication. This review was conducted in line with PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Risk of bias was assessed using the Newcastle-Ottawa tool. RESULTS: A total of 14 RCTs with 1367 TKA were included with a mean age of - years and - years for all-polyethylene and metal-backed tibial components groups, respectively. All-polyethylene group demonstrated statistically significant differences in five-year survivorship (OR 0.27; 95% CI 0.10-0.75; p value 0.01) and stairs climbing score (OR - 2.07; 95% CI - 3.27-0.87; p value 0.0007) when compared to the metal-backed group. The metal-backed design was significantly more radiographically stable in anterior-posterior, varus-valgus, and internal-external rotations at the 2-year follow-up compared to all-polyethylene tibias (OR - 0.09; 95% CI - 0.16 to - 0.02; p value 0.02) as per the pooled radiostereographic analysis. However, ten-year survivorship (OR 0.92; 95% CI 0.53-1.60; p value 0.78), range of motion (OR - 0.57; 95% CI - 2.00-0.85, p value 0.43), knee society scores (OR 1.38; 95% CI - 0.47-3.23, p value 0.14), and complications (OR 0.83; 95% CI 0.5-1.39, p value 0.48) were comparable between both groups. CONCLUSIONS: While this meta-analysis suggests that all-polyethylene tibial components in total knee arthroplasty may offer advantages over metal-backed components in terms of five-year survivorship, and stairs climbing score, this finding should be considered in the context of potential confounding factors. Nonetheless, based on the results, the all-polyethylene implant should be considered a viable choice for primary knee replacement. LEVEL OF EVIDENCE: I.

Differential 18F-NaF uptake in various compartments in knee osteoarthritis: an observational study using PET/MRI.

AIM: To investigate if the pattern of fluorine-18-labelled sodium fluoride (18F-NaF) uptake on integrated positron-emission tomography (PET)/magnetic resonance imaging (MRI) of bone marrow lesions (BML) and osteophytes differs between different knee compartments. MATERIALS AND METHODS: Sixteen patients with no prior history of knee injury with or without pain were recruited for the study. The images of both knees were acquired on simultaneous PET/MRI. The acquisition was done after 45 minutes of intravenous injection of 18F-NaF 185-370 MBq (5-10 mCi) for 40 minutes. Each knee was divided into eight compartments patella, trochlea, medial central femur, lateral central femur, medial posterior femur, lateral posterior femur, medial tibia, lateral tibia, and cruciate ligament insertion specifically for BML. BML and osteophytes were scored using MRI Osteoarthritis Knee Score (MOAKS) criteria and their corresponding maximum standardised uptake values (SUVmax) recorded. RESULTS: BML and osteophytes both showed statistically significant differences among knee compartments, i.e., p-value <0.000 and < 0.043 respectively. SUVmax for BML and osteophytes was greatest in the medial tibia. CONCLUSION: 18F-NaF PET/MRI showed that BML and osteophytes had differential uptake values due to bone remodelling amongst the various knee compartments and this may help to design disease-modifying osteoarthritis drugs in the future.

Difference between medial and lateral tibia plateau in the coronal plane: importance of preoperative evaluation for medial unicompartmental knee arthroplasty.

BACKGROUND: Setting bone cutting levels for different joint line orientations of the medial and lateral tibia plateaus in individual patients is not clear. We aimed to evaluate the difference between joint line orientation of the medial and lateral tibia plateaus relative to the horizontal line of mechanical axis of tibia as tibial plateau difference (TPD) for an optimal tibial bone cut in medial unicompartmental knee arthroplasty (UKA) and determine which factors could influence TPD. We aimed to investigate the effect of preoperative TPD on polyethylene liner size in medial UKA. METHODS: TPD in the coronal plane were measured in 181 female patients (181 knees). To determine the morphology of proximal tibia according to the severity of osteoarthritis, the patients were classified into three groups based on diagnosis and treatment: 80 who underwent robot-assisted medial UKA, 45 who underwent total knee arthroplasty (TKA), and 56 with early-stage osteoarthritis (OA) who had conservative management. Also, we divided the medial UKA group into two groups according to TPD (greater than or less than 5 mm) and compared polyethylene liner sizes. RESULTS: No significant difference was observed in TPD (p = 0.662), difference between the medial and lateral femoral condyle levels (p = 0.54), medial proximal tibial angle (p = 0.169), or posterior tibial slope (p = 0.466) among the three groups. Increased TPD was significantly associated with increased mechanical femorotibial angle(mFTA) (p < 0.01). The medial UKA group was divided into two groups according to TPD greater or less than 5 mm. Thicker polyethylene liners were used for groups with TPD greater than 5 mm (8.5 ± 0.7 mm versus 8.2 ± 0.3 mm, p = 0.01). Additionally, the proportion of patients using the thinnest polyethylene (8 mm) in each TPD group (greater or less than 5 mm) was higher in patients with TPD less than 5 mm (82.4% versus 58.7%, p = 0.038). CONCLUSIONS: Preoperative measurement of TPD is important to help surgeons predict the most appropriate bone cutting level in the coronal plane in primary medial UKA. Tibial bone resection would be likely to be thicker than needed in patients with increased TPD in medial UKA.

Asymmetrical tibial polyethylene geometry-cruciate retaining total knee arthroplasty does not fully restore in-vivo articular contact kinematics during strenuous activities.

PURPOSE: A new CR TKA design with concave medial and convex lateral tibial polyethylene bearing components was introduced recently to improve functional outcomes. This study aimed to investigate in-vivo articular contact kinematics in unilateral asymmetrical tibial polyethylene geometry CR TKA patients during strenuous knee flexion activities. METHODS: Fifteen unilateral CR TKA patients (68.4 ± 5.8 years; 6 male/9 female) were evaluated for both knees during sit-to-stand, single-leg deep lunges and step-ups using validated combined computer tomography and dual fluoroscopic imaging system. Medial and lateral condylar contact positions were quantified during weight-bearing flexion activities. The Wilcoxon signed-rank test was performed to determine if there is a significant difference in articular contact kinematics during strenuous flexion activities between CR TKA and the non-operated knees. RESULTS: Contact excursions of the lateral condyle in CR TKAs were significantly more anteriorly located than the contralateral non-operated knee during sit-to-stand (3.7 ± 4.8 mm vs - 7.8 ± 4.3 mm) and step-ups (- 1.5 ± 3.2 mm vs - 6.3 ± 5.8 mm). Contact excursions of the lateral condyle in CR TKAs were significantly less laterally located than the contralateral non-operated knee during sit-to-stand (21.4 ± 2.8 mm vs 24.5 ± 4.7 mm) and single-leg deep lunges (22.6 ± 4.4 mm vs 26.2 ± 5.7 mm, p < 0.05). Lateral condyle posterior rollback was not fully restored in CR TKA patients during sit-to-stand (9.8 ± 6.7 mm vs 12.9 ± 8.3 mm) and step-ups (8.1 ± 4.8 mm vs 12.2 ± 6.4 mm). Lateral pivoting patterns were observed in 80%, 73% and 69% of patients during sit-to-stand, step-ups and single-leg deep lunges respectively. CONCLUSION: Although lateral femoral rollback and lateral pivoting patterns were observed during strenuous functional daily activities, asymmetric contact kinematics still persisted in unilateral CR TKA patients. This suggests the specific investigated contemporary asymmetrical tibial polyethylene geometry CR TKA design evaluated in this study does not fully replicate healthy knee contact kinematics during strenuous functional daily activities. LEVEL OF EVIDENCE: III.

Implantation of the Femoral Component Relative to the Tibial Component in Medial Unicompartmental Knee Arthroplasty: A Clinical, Radiological, and Biomechanical Study.

BACKGROUND: Unicompartmental knee arthroplasty (UKA) is a procedure with low morbidity and fast recovery. Anatomic implants or robotic-assisted UKA has been proposed to improve outcomes with precise positioning. Femoral component position (FCP) relative to the tibial insert could be a factor influencing the contact stresses. We aimed to evaluate the effect of the FCP relative to the tibial insert on clinical outcomes and stress distribution after medial UKA. METHODS: Sixty-two medial fixed-bearing UKAs were evaluated at a minimum two-year follow-up using the Knee Society Score. Postoperative radiological evaluation performed on frontal X-rays classified the FCP relative to the tibial insert into the following: group M (medial), group C (central), and group L (lateral). A finite element model was developed to evaluate the biomechanical effects of the FCP relative to the tibial component. RESULTS: The postoperative radiological evaluation showed 9 cases in group M, 46 cases in group C, and 7 cases in group L. The maximum knee flexion angle and the 2-year postoperative "symptom" and "patient satisfaction" scores of the Knee Society Score were significantly higher in group C. Compared with central positioning, a shift along the mediolateral axis leads to a displacement of the contact pressure center. CONCLUSION: The FCP relative to the tibial insert may increase patient outcomes at a minimum follow-up of two years after fixed-bearing medial UKA. Accordance between FCP and contact stresses on the polyethylene insert could be a contributing factor of long-term survival of UKA.

Magnetic Resonance Imaging Synovial Classification Is Associated With Revision Indication and Polyethylene Insert Damage.

BACKGROUND: Patients with total knee arthroplasty (TKA) stiffness are commonly presumed to have arthrofibrosis though no specific test exists. In patients undergoing revision TKA, we asked the following question: (1) Do patients who are revised for stiffness display a synovial reaction on MRI that is different than patients revised for other reasons? (2) Do these patients have a different magnitude of polyethylene insert damage than patients revised for other reasons? and (3) Is the MRI synovial classification associated with polyethylene insert damage? METHODS: Patients undergoing revision TKA for stiffness had a preoperative MRI performed, and the synovium was classified on MRI in a blinded fashion as arthrofibrosis, focal scarring, polymeric reaction, infection, or abnormal. At surgery, the polyethylene inserts were removed, and graded by 2 reviewers for total surface damage. RESULTS: Revision indication and MRI synovial classification were associated (P < .0001), with a greater proportion of patients assigned an MRI classification of arthrofibrosis revised for arthrofibrosis and a greater proportion of patients assigned a polymeric classification revised for aseptic loosening. Patients assigned an MRI synovial classification of polymeric had the greatest damage to the tibial insert (P < .0001), and patients revised for the clinical indication of aseptic loosening had the greatest damage to the tibial insert (P < .0001). CONCLUSION: Synovial grading on MRI is strongly associated with revision indication and polyethylene insert damage. In patients with stiffness in the absence of another complication, MRI can be a helpful diagnostic adjuvant in confirming the diagnosis of stiffness.

Varus Collapse in Total Knee Arthroplasty: Does Fixation or Bone Fail First?

INTRODUCTION: Aseptic tibial loosening is now considered the most common reason that total knee arthroplasties (TKA) fail long term. There are unique subsets of patients that fail into varus alignment of the tibial tray with collapse of the medial proximal tibia. It is currently unknown if the implant fixation fails first or if the proximal medial tibia collapses first. MATERIALS: We performed a retrospective analysis of 88 patients that were revised at our institution secondary to aseptic varus collapse of the proximal tibia. Two fellowship-trained arthroplasty surgeons performed a retrospective analysis on sequential precollapse radiographs in each patient to determine which failed first: the implant fixation (implant-cement or cement-bone interface) or the medial proximal tibia. DISCUSSION: 36/88 (40.9%) patients had a series of precollapse radiographs that could be reviewed. Failure at the implant-cement interface before varus collapse in 23 vs 22 patients, failure at the implant-cement and cement-bone interface before varus collapse in two patients, and contemporaneous failure at the implant-cement interface and varus collapse in 11 vs 12 patients were identified by reviewers one and two, respectively. CONCLUSION: The most frequent mechanism of failure identified was failure of the implant-cement interface followed by subsequent medial tibial varus collapse. Improving implant fixation may decrease the incidence of this unique failure mechanism. We advocate the use of supplemental stem fixation in high-risk patients and optimal cement techniques for all patients as methods of potentially avoiding tibial varus collapse, one of the most frequent modes of long-term failure.

Molded, Gamma-radiated, Argon-processed Polyethylene Components of Rotating Hinge Knee Megaprostheses Have a Lower Failure Hazard and Revision Rates Than Air-sterilized, Machined, Ram-extruded Bar Stock Components.

BACKGROUND: Megaprostheses are commonly used for reconstruction after distal femoral resection in orthopaedic oncology. The polyethylene bearings in these reconstructions experience wear and wear-related complications that may result in revision surgery. Improved manufacturing and processing of polyethylene has increased the durability of components commonly used for routine arthroplasty. Alterations in the manufacture of polyethylene is expected to reduce the revision risk of oncologic megaprostheses, resulting in fewer revision procedures, but this has not been proven. QUESTIONS/PURPOSES: Is there a difference in the hazard of polyethylene wear or breakage leading to prosthetic revision between differences in polyethylene manufacture and processing based on a competing risk analysis? METHODS: This was a single-center, observational, retrospective comparative study of 224 patients who had distal femur megaprostheses with identical rotating hinge articulations and knee kinematics after oncologic surgery from 1993 to 2015. No differences in surgical indications, joint articular components and kinematics, age, sex, diagnosis, BMI, use of chemotherapy, or tumor stage were seen with the patient numbers available. Prosthetic survivorship free from prosthetic revision surgery because of polyethylene wear-related revisions, defined as breakage, increased excursion on varus-valgus stress, or new locking or giving way was compared between two groups of patients: group 1 polyethylene (P1) (66 patients) who had air-sterilized machined ram-extruded bar stock or group 2 polyethylene (P2) (158 patients) molded gamma-radiated argon-processed polyethylene components. The mean follow-up duration for the P1 group (89 ± 55 months) was not different from that of patients with P2 polyethylene (79 ± 63 months; p = 0.24) including 27% (18 of 66) of patients in the P1 group and 25% (40 of 158) of patients in the P2 group followed for more than 10 years. More patients in the P2 group were lost to follow-up (9.2%, 16 of 174) than in the P1 group (5.7%, 4 of 70) but this was not statistically different (chi square; p = 0.37). The hazard of revision because of polyethylene wear or breakage was calculated with a competing risk analysis using the Fine-Gray subdistribution hazard model. RESULTS: The P1 implants had a higher hazard ratio for revision caused by polyethylene damage at 120 months than did the P2 polyethylene implants (P1 HR 0.24 [95% CI 0.13 to 0.36] versus HR 0.07 [95% CI 0.03 to 0.12]), which represents an estimated absolute risk reduction of 17% (95% CI 6.15 to 27.9). CONCLUSION: Polyethylene damage can result in megaprosthetic revisions in patients undergoing oncologic procedures. The hazard of polyethylene failure resulting in revision surgery was lower in patients who received recent polyethylene than in patients with polyethylene produced by previous methods, enhancing the durability of distal femoral megaprosthetic reconstructions. Despite improvements in polyethylene manufacture and clinical results, revision solely because of polyethylene damage still occurs in 7% of patients by the 10-year timepoint; thus, more improvement is needed. Patients who receive these implants should be monitored for signs and symptoms of polyethylene damage. LEVEL OF EVIDENCE: Level III, therapeutic study.

The 22 to 25-Year Survival of Cemented and Cementless Total Knee Arthroplasty in Young Patients.

BACKGROUND: Despite cementless total knee arthroplasties (TKAs) have potential advantages over cemented TKAs, there are conflicting results. The purpose of the present study is to determine the long-term clinical and radiographic results, the survival rate, and the prevalence of osteolysis of cemented vs cementless TKAs. METHODS: A total of 261 patients (522 knees) who underwent bilateral simultaneous TKAs were included in the present study (mean age, 62.5 ± 5.5 years). Patients were evaluated clinically, radiographically, and also using computed tomography scans. A mean follow-up period was 23.8 years (range, 22-25 years). RESULTS: There were no significant differences between the Knee Society total score, change in total score, knee function score, and Western Ontario and McMaster Universities Osteoarthritis Index score in the 2 groups. In total, 8 knees (3%) were revised in the cementless group and 5 knees (2%) in the cemented group. Radiographs and computed tomography scans showed no femoral, tibial, or patellar osteolysis in either group. The rate of survival at 25 years was 97% (95% confidence interval [CI], 92%-100%) in the cementless group and 98% (95% CI, 94%-100%) in the cemented group, with reoperation for any reason as the end point. The rate of survival at 25 years was 98% (95% CI, 94%-100%), with reoperation for aseptic loosening as the end point in both groups. CONCLUSIONS: At this length of follow-up, cementless TKA has comparable outcomes and survivorship to cemented TKA.

Impact of Polyethylene Thickness on Clinical Outcomes and Survivorship in Medial Mobile-Bearing Unicondylar Knee Arthroplasty.

BACKGROUND: The thickness of the polyethylene bearing in medial unicondylar knee arthroplasty (UKA) is determined by the depth of the tibial resection, degree of correctable deformity, and balance of the knee. The purpose of this study is to evaluate whether polyethylene thickness in medial mobile-bearing UKA impacts clinical outcomes and survivorship. METHODS: A retrospective review from 2004 to 2017 identified patients who underwent a primary mobile-bearing medial UKA with 2-year minimum follow-up or revision. A total of 2305 patients (3030 knees) met inclusion criteria. Patients were divided in 2 groups: thin bearing (group 1): 3-mm or 4-mm bearing and thick bearing (group 2): ≥ 5 mm. The thin group consisted of 2640 knees (87%), whereas the thick group had 390 knees (13%). Preoperative and postoperative demographics, range of motion, Knee Society scores, complications, and reoperations were evaluated. RESULTS: Mean follow-up was 5.2 years (range, 0.5 to 12.6). There was no significant difference between groups in postoperative range of motion or Knee Society scores (P > .05). Manipulations were performed in 1.3% of patients and not significantly different between groups. The all-cause revision rate for group 1 was 4.02% and group 2 was 4.58% (P = .6). Revision rates for tibial aseptic loosening were significantly higher in group 2 (1.8%) than those in group 1 (0.7%) (P = .04). There was no significant difference in failure rates between groups for tibial collapse or fracture, femoral aseptic loosening, arthritic progression, bearing dislocation, or other cause of revision. CONCLUSION: This study demonstrated that thicker bearings in medial UKA increased the risk of tibial aseptic loosening, but not all-cause failures or clinical outcomes.