Use of ultrasound imaging for assessment of the periodontium: A systematic review.

The objective of this study was to systematically review the literature regarding diagnostic applications of ultrasound imaging for evaluation of the periodontium in humans. The search was conducted on Medline, EMBASE, Web of Science, Scopus, Cochrane, and PubMed up to April 3, 2023. The studies included were exclusively human studies that assessed the periodontium with ultrasound (US) imaging (b-mode). Outcomes measured included alveolar bone level, alveolar bone thickness, gingival thickness, and blood flow quantification. References were imported to Covidence. Two reviewers conducted phases 1 and 2. The JBI risk assessment tool for cross-sectional studies was used. Extracted data included the transducer and measurements used and the study's outcomes. The search yielded 4892 studies after removing duplicates. From these, 25 studies were included and selected for extraction. Included studies retrieved outcomes from US examinations of the periodontal tissues. From the selected studies, 15 used US on natural teeth, 4 used US on implants, 2 used US on edentulous ridges, and 4 used color flow/power in US to evaluate the blood flow. The results of the present systematic review suggest that US might be a feasible and valuable diagnostic tool for the periodontium, with the potential to complement shortfalls of current radiographic technologies.

Clinical accuracy of partially guided implant placement in edentulous patients: A computed tomography-based retrospective study.

OBJECTIVES: This retrospective study was intended to evaluate the clinical accuracy of partially guided template in guiding implant placement in edentulous patients. METHODS: A total of 120 implants were placed in 24 patients with at least one completely edentulous arch with a partially guided system. Based on CBCT data, a repeatable method was used to measure linear and angular deviations of implants at 3D level in Mimics medical software. The influence of supporting tissue and implant region on the accuracy was assessed, followed by the evaluation of direction of linear deviations in biologically vital areas. RESULTS: Linear deviations of all implants were 1.91 ± 0.68 mm, 1.47 ± 0.68 mm, and 1.02 ± 0.69 mm at apical, apical lateral, and apical vertical levels. When at the cervical, cervical lateral, and cervical vertical levels, the linear deviations were 1.53 ± 0.65 mm, 0.98 ± 0.53 mm, and 1.01 ± 0.69 mm, respectively. Angular deviation of all implants was 7.14 ± 3.41°. Implants guided by mucosa + tooth-supported templates showed higher linear deviations at apical vertical level (1.21 ± 0.72 mm vs. 0.86 ± 0.63 mm, p < .05) and cervical vertical level (1.18 ± 0.72 mm vs. 0.87 ± 0.63 mm, p < .05) than mucosa-supported templates, and implants in maxilla were found higher angular deviation than mandible (7.89 ± 3.61° vs. 6.29 ± 2.97°, p < .05). CONCLUSIONS: The partially guided template served as clinically viable surgical assistance in implant placement in edentulous patients. When using mucosa + tooth-supported template or placing implants in maxilla, more caution was required, especially in biologically vital areas.

Accuracy of edentulous full-arch implant impression: An in vitro comparison between conventional impression, intraoral scan with and without splinting, and photogrammetry.

OBJECTIVES: The purpose of this in vitro study was to compare the trueness and precision of complete arch implant impressions using conventional impression, intraoral scanning with and without splinting, and stereophotogrammetry. MATERIALS AND METHODS: An edentulous model with six implants was used in this study. Four implant impression techniques were compared: the conventional impression (CI), intraoral scanning (IOS) without splinting, intraoral scanning with splinting (MIOS), and stereophotogrammetry (SPG). An industrial blue light scanner was used to generate the baseline scan from the model. The CI was captured with a laboratory scanner. The reference best-fit method was then applied in the computer-aided design (CAD) software to compute the three-dimensional, angular, and linear discrepancies among the four impression techniques. The root mean square (RMS) 3D discrepancies in trueness and precision between the four impression groups were analyzed with a Kruskal-Wallis test. Trueness and precision between single analogs were assessed using generalized estimating equations. RESULTS: Significant differences in the overall trueness (p = .017) and precision (p < .001) were observed across four impression groups. The SPG group exhibited significantly smaller RMS 3D deviations than the CI, IOS, and MIOS groups (p < .05), with no significant difference detected among the latter three groups (p > .05). CONCLUSIONS: Stereophotogrammetry showed superior trueness and precision, meeting misfit thresholds for implant-supported complete arch prostheses. Intraoral scanning, while accurate like conventional impressions, exhibited cross-arch angular and linear deviations. Adding a splint to the scan body did not improve intraoral scanning accuracy.

The influence of guide stabilizers and their application sequences on trueness and precision of surgical guides in free end situations: An in vitro analysis.

OBJECTIVES: To evaluate the impact of guide stabilizers and their application sequences on implant placement accuracy of guided implant surgery in multiple teeth loss at free end. MATERIALS AND METHODS: In this study, 96 implants were placed in the regions of #34, #36, and #37 of 32 identical mandibular models. The influence of using guide stabilizers or not (group A and group B) and various guide stabilizers application sequences (group B: #34 → #36 → #37; group C: #36 → #34 → #37; group D: #37 → #34 → #36) on implant placement trueness and precision was investigated. Data were analyzed using T-tests and one-way ANOVA. RESULTS: Group B showed significant benefits in enhancing implant placement precision. Compared to group A, it resulted in reducing 3D-deviation at crest and 2D deviation in vestibular-oral direction at both crest and apex. Furthermore, group D demonstrated greater improvement in global implant placement precision by reducing 2D deviation in mesial-distal direction at both crest and apex. Among the three different stabilizer application sequences, group D exhibited the highest level of implant placement precision. CONCLUSIONS: In cases of missing teeth at distal free end, the use of guide stabilizers and their application sequences does not have a significant impact on implant placement trueness. However, they do improve implant placement precision compared to methods that do not utilize guide stabilizers. Specifically, applying a guide stabilizer first at the furthest implant site to change teeth loss classification from free end to edentulous space with posterior support is the most reliable sequence.

Histological and radiological outcome after horizontal guided bone regeneration with bovine bone mineral alone or in combination with bone in edentulous atrophic maxilla: A randomized controlled trial.

OBJECTIVE: To assess the radiological and histological outcome after horizontal guided bone regeneration (GBR) with deproteinized bovine bone mineral (DBBM) alone or in combination with particulate autogenous bone (PAB). MATERIALS AND METHODS: Eighteen edentulous patients with an alveolar ridge of ≤4 mm were included in this split-mouth randomized controlled trial. Horizontal GBR with a graft composition of 100% DBBM (100:0) on one side and 90% DBBM and 10% PAB (90:10) on the other side were conducted in all patients. Cone beam computed tomography (CBCT) was obtained preoperatively, immediately postoperative, and after 10 months of healing. Width and volumetric changes in the alveolar process were measured on CBCT. Implants were placed after 10 months of graft healing where biopsies were obtained for histomorphometrical evaluation. RESULTS: The gained widths were 4.9 (±2.4) mm (100:0) and 4.5 (±2.0) mm (90:10) at 3 mm from the top of the crest, and 5.6 (±1.3) mm (100:0) and 4.6 (±2.1) mm (90:10) at 6 mm from the top of the crest. The mean volumetric reductions were 32.8% (±23.8) (100:0) and 38.2% (±23.2) (90:10). Histomorphometry revealed that mean percentages of bone were 50.8% (±10.7) (100:0) and 46.4% (±11.3) (90:10), DBBM were 31.6% (±12.6) (100:0) and 35.4% (±14.8) (90:10), and non-mineralized tissue were 17.6% (±11.7; 100:0) and 18.2% (±18.2) (90:10). No significant differences were evident between in any evaluated parameters. CONCLUSIONS: There were no additional effects of adding PAB to DBBM regarding bone formation, width changes, or volumetric changes after 10 months of graft healing.

Impact of Patient Education Formats on Treatment Adherence and Denture Hygiene in Edentulous Patients: A Comparative Study.

BACKGROUND Effective communication and patient education are important in geriatric dental care. Memory decline complicates patient adherence. This study aimed to compare verbal, audio, and video patient education material (PEM) and adherence to dental prosthetic management in edentulous patients. MATERIAL AND METHODS 90 completely/partially edentulous patients (aged 40 to 70 years), were divided (simple random) into three groups (Gp) of 30 each . A total of 68 instructions were organized into 9 learning categories. For GpVi, a 20 minute video was shot using a Sony camera (PD170), with two actors depicting related PEM information. Patients were recalled after 1 day and 7days, to recall the PEM instructions. A Denture plaque Index (DPI) determined the efficiency of the instructions at both time intervals. Frequencies, means and standard deviations were derived for each group and then compared using Chi square, paired and unpaired t test and a Neuman-Keul post hoc pairwise test. All significant differences were kept at probability t value of ≤0.05. RESULTS PEM instructions related to patient individuality, proper tongue position and miscellaneous showed poor patient recall. At 1 day interval, audio was found to have better recall than video and verbal in 5 PEM instruction categories. At 7 day interval, video showed better recall than other two groups (P≤0.05). Despite improvements in patients recall, DPI revealed better denture hygiene maintenance in patients receiving instructions through video format (P≤0.05). CONCLUSIONS For all categories, no single media was considered to be sufficient, audio produced early better recall while video influenced long term recall and better denture hygiene maintenance.

Oral frailty among dentate and edentate older adults in long-term care.

BACKGROUND: The objectives of this study were to compare oral frailty (OFr) among edentate and dentate older adults living in long-term care facilities (LTCF) and to clarify how edentulism and oral disease burden (ODB) of dentate older adults are associated with OFr. METHODS: The population of this study comprised 94 edentate and 209 dentate residents in LTCF in Helsinki, Finland, who had previously participated in a nutritional study. The participants underwent a clinical oral examination. The dentate residents were further divided into three ODB groups based on asymptotic dental score. The edentate and different ODB groups were compared with each other regarding demographics and oral and medical findings. OFr was defined as ≥ 2 of following: having a diet of soft/pureed food, residue of food in the oral cavity, inability to keep the mouth open during examination, unclearness of speech, dry mouth. The association between OFr and edentulousness and various levels of ODB was analyzed by a multivariate logistic model. RESULTS: Participants with low ODB had significantly less OFr than their edentate peers (p = 0.009). Furthermore, the edentate and dentate with high ODB had similar odds for OFr. CONCLUSIONS: Edentulousness and high ODB are equally harmful conditions and may predispose to OFr. This study suggests that maintaining healthy natural teeth and good oral health (low ODB) may protect against OFr. TRIAL REGISTRATION: The Ethics Committee of the Hospital District of Helsinki and Uusimaa approved the protocols for the nutritional status and oral healthcare studies and the merging of the data, including patient medical records (Register number HUS/968/2017).

Effect of zirconia surface conditioning before glazing on the wear of opposing enamel: an in vitro study.

OBJECTIVES: This in vitro study aimed to evaluate the wear of natural teeth opposing 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) with different surface conditions. MATERIALS AND METHODS: Sixty 3Y-TZP specimens were randomly assigned to six groups (n = 10), differing in surface condition. In three groups, the samples underwent glazing-with the glaze applied to roughened (i.e., 106-µm-grit diamond-finished), as-sintered, and polished zirconia. The three remaining groups consisted of unglazed specimens: solely polished samples and diamond-finished samples (106-µm-grit and 46-µm-grit) without further conditioning. Two-body wear was evaluated at extracted, non-carious molars (n = 60), which served as antagonists in chewing simulation (10,000 masticatory cycles, 49N load). As a control, natural teeth with intact enamel surfaces were tested against natural molars (n = 10). All samples were 3D-scanned before and after the chewing simulation (7 Series, Straumann). Volume loss was calculated (Inspect Software, GOM), and statistically analyzed (SPSS Statistics 24, IBM). RESULTS: Volume loss of the natural antagonists decreased in the following order: 106-µm-grit diamond-finished zirconia (4.6 ± 2.5 mm3), glazed 106-µm-grit diamond-finished zirconia (3.8 ± 1.1 mm3), glazed as-sintered zirconia (3.5 ± 0.9 mm3), 46-µm-grit diamond-finished zirconia (1.7 ± 0.6 mm3), control (1.6 ± 0.7 mm3), glazed polished zirconia (1.4 ± 0.5 mm3), and solely polishing (0.4 ± 0.2 mm3). Even when polishing the surfaces before glazing, volume loss was not mitigated to the same extent as after polishing alone. CONCLUSIONS: The zirconia surface condition beneath the glazing influences antagonist wear. Although polishing before glazing resulted in acceptable levels of antagonist wear, this approach did not yield as favorable results as polishing alone. CLINICAL RELEVANCE: For operators favoring glazing, pre-polishing the zirconia surface could be advantageous to reduce wear.

Ultrasound analysis of the masseter and anterior temporalis muscles in edentulous patients rehabilitated with full-arch fixed implant-supported prostheses.

OBJECTIVES: Total tooth loss is common in the aging population resulting in insufficient chewing function with subsequent weakening of the masticatory muscles. The study aims to evaluate the changes in thicknesses of the masseter and anterior temporal muscle in edentulous patients following the reconstruction of implant-supported fixed prostheses and compare them with the dentate individuals. MATERIALS AND METHODS: The study was designed as a prospective, single-center, controlled clinical trial. A total of 60 participants were included in the present study. The patients were divided into two groups; Group I (Test Group): 30 edentulous patients who received implant-supported fixed prostheses, Group II (Control Group): 30 dentate individuals of an age and sex-matched group. Ultrasonography was used to measure the cross-sectional thickness of the left and right musculus masseter and anterior temporalis immediately after the cementation of the prosthetic rehabilitation (T1), on the 1st (T2) and 6th (T3) months after rehabilitation and at a single time point in the control group. RESULTS: The results showed that there were significant comparison differences in muscle thickness at the baseline measurements between groups while at the end of the 6th month, these differences were not significant. The muscle thicknesses of both the masseter and anterior temporalis muscles increased significantly at T2 and T3 compared to T1 in the test group. The asymmetry index between the left and right muscles in the test group and the asymmetry differences between groups also decreased significantly at the end of the 6th month. CONCLUSION: The implant-supported fixed prostheses significantly increase the thicknesses of the masseter and anterior temporal muscle together with a decrease in the asymmetry between the left and right muscles. At six months, implant-treated patients showed similar muscle thicknesses compared to dentate individuals. CLINICAL RELEVANCE: The findings suggest that implant-supported fixed prostheses can improve the masticatory function and facial symmetry of edentulous patients.

Occlusal equilibration and muscle activity in fixed versus removable mandibular implant supported overdenture.

OBJECTIVES: Single denture rehabilitated patients have negative appraisals regarding oral function, mostly associated by stability and retention issues regarding mandibular prosthetics. Therefore, this study assessed patients' occlusal equilibration, muscle activity, and oral health-related quality of life (OHRQoL) receiving milled removable or fixed mandibular implant retained prostheses. MATERIALS AND METHODS: Twenty-two edentulous mandibular ridges patients were randomly distributed into two groups based on the definitive prosthesis received. Group I: Removable mandibular implant-supported overdenture, Group II: Implant retained fixed prosthesis. Occlusal equilibration was evaluated utilizing Occlusense, muscle activity via Electromyograph (EMG) at delivery, after one, and three months. The OHRQoL was evaluated by Oral Health Impact Profile questionnaire (OHIP-19) before delivery and after follow-ups. Data were collected, tabulated, and analyzed, utilizing independent t-test and One-way ANOVA followed Tukey`s post-hoc test. Significance level set at P ≤ 0.05. RESULTS: Groups I &II showed significant improvement in occlusal equilibration, muscle activity and OHRQoL. Group II demonstrated significantly higher improvement than group I in occlusal equilibration associated with muscle activity after 1 month, and in functional limitations domain in OHRQoL questionnaire after 3 months. CONCLUSION: Implant retained mandibular prosthesis showed improvement in occlusal equilibration, muscle activity, and OHRQoL regardless of prosthesis type employed. Fixed implant-supported prosthesis revealed better outcomes than removable mandibular implant-supported overdenture concerning occlusal equilibration, muscle activity, and OHRQoL regarding functional limitations. CLINICAL RELEVANCE: Implant retained mandibular prosthesis is one of best treatment options for single mandibular completely edentulous patients, as dental implants improved occlusal equilibration, muscle activity, and OHRQoL.

Relationship between maximal isometric tongue pressure and limit of fracture force of gels in tongue squeezing.

BACKGROUND: There is no clear objective indicator for selecting soft foods that are required for food bolus formation in older people with impaired oral function. OBJECTIVE: This study aimed to investigate the relationship between maximal isometric tongue pressure (MITP) and the mechanical properties of gels that can be crushed by the tongue. METHODS: This study included 65 healthy participants aged 22-96 (young group; 15 males, 15 females; older dentate group; 7 males, 8 females; older edentulous group; 10 males, 10 females). MITP was measured by the balloon-probe device. Agar gel with 10 different kinds of fracture force from 10N to 100N was used. The limit of fracture force of gels (LFFG) that were crushed by the tongue was measured by the up-and-down method. In the older edentulous group, two items were measured with and without dentures. Spearman's rank correlation coefficient was used to evaluate the relationship between MITP and LFFG in each group (p < .05). RESULTS: There were positive correlations between MITP and LFFG in all groups (overall groups: rs = .66, young group: rs = .46, older dentate group: rs = .61, older edentulous group with dentures: rs = .60, older edentulous group without dentures: rs = .47). CONCLUSION: MITP and LFFG were positively correlated in young, older dentate and older edentulous groups, suggesting that MITP has the potential to be an objective indicator of the range of mechanical properties of soft food that can be crushed by the tongue.

Masticatory performance, self-perception of oral health, oral health-related quality of life and nutritional status of completely edentulous elderly patients submitted to different rehabilitation treatments: A cross-sectional study.

BACKGROUND: The impact of treatments on completely edentulous individuals on masticatory performance (MP), oral health-related quality of life (OHRQoL), nutritional status (NS) and socio-economic profile (SP) is unclear in the literature. OBJECTIVE: To compare the MP, OHRQoL, NS and SP of totally edentulous elderly users of bimaxillary complete dentures (CD) and users of lower implant-supported fixed complete dentures (IFCD). METHODS: Forty participants were allocated into groups according to rehabilitation treatment (n = 20): bimaxillary CD (G1) and lower IFCD, and upper CD (G2). The evaluation of MP used almonds by the method of sieves. Four questionnaires (Geriatric Oral Health Assessment Index-GOHAI and Oral Health Impact Profile Edent-OHIP-Edent, Brazilian Economic Classification Criteria-ABEP and Mini Nutritional Assessment-MNA) were applied to assess the OHRQoL, SP and NS of the elderly, respectively. After evaluating the statistical assumptions, the Mann-Whitney (α = .05) test was applied to compare the groups regarding MP, OHRQoL, NS and SP. Spearman's correlation (α = .05) was performed to verify the correlation between the MP, the OHRQoL and the NS of the participants. RESULTS: G2 showed better MP (p < .05) in all masticatory cycles, OHRQoL (p < .05) and NS than the G1. However, the participants' self-perception of oral health did not differ between groups (p < .05). A moderate negative correlation was found between MP and OHRQoL for 40 masticatory cycles (r2 = -0.513; p = .001). CONCLUSION: Individuals rehabilitated with IFCD had a higher average monthly family income and achieved superior behaviour in MP and OHRQoL, in addition to lower risks of malnutrition when compared to individuals using bimaxillary CD.

Masticatory function in edentulous patients wearing implant overdentures after graftless maxillary sinus membrane elevation.

BACKGROUND: Graftless sinus floor augmentation shows good results in bone gain, radiology and implant survival. Clinically, this technique can be recommended as an alternative to conventional procedures using augmentation materials. OBJECTIVES: This study aims to assess masticatory performance, masticatory ability and patient satisfaction after graftless sinus floor augmentation. METHODS: The study group consisted of patients who had received a graftless sinus lift procedure in a split-mouth design and was compared to patients with maxillary implant-supported overdentures without augmentation and a natural dentition group. To assess objective masticatory performance, the mixing ability test was performed. Three questionnaires were used to assess patient reported outcomes related to mastication and patient satisfaction. RESULTS: Each group included ten patients. Both the graftless sinus lift group and the edentulous control group had a worse masticatory performance compared to the natural dentition group. Masticatory ability, measured by patient reported outcomes, was not different between the graftless sinus floor augmentation group and implant-retained overdentures group without augmentation, but the natural dentition group showed better results. Thereby, the better the masticatory performance in patients with a graftless sinus membrane elevation the better the patient satisfaction for 'prosthesis', 'appearance of prostheses', 'speech' and 'mastication and eating'. CONCLUSIONS: Patients with implant-supported overdentures show inferior masticatory function compared to those with natural dentition. There were no significant differences in masticatory performance between patients with implant-retained overdentures, with or without graftless augmentation. The decision on the preferred procedure should consider additional factors such as anatomical, surgical-technical aspects and patient's preferences.

A guide for selecting the intraoral scan extension when fabricating tooth- and implant-supported fixed dental prostheses.

OBJECTIVES: To describe a new classification for intraoral scans based on the scan extension and to introduce a decision guideline to choose the scan extension for fabricating tooth- and implant-supported fixed dental prostheses (FDPs). OVERVIEW: Multiple operator- and patient-related factors have been identified that can decrease the scanning accuracy of intraoral scanners (IOSs), including scan extension. However, the decision criteria for selecting scan extension for fabricating tooth- and implant-supported restorations is unclear. Based on the extension of the intraoral digital scans, three types of scans can be defined: half-arch (anterior or posterior), extended half-arch, and complete-arch scan. Variables to consider when choosing the scan extension include the number and location of units being restored, as well as the extension and location of edentulous areas. Additionally, the accuracy of the virtual definitive cast and the accuracy of the maxillomandibular relationship captured by using IOSs should be differentiated. CONCLUSIONS: A decision tree for selecting the scan extension is presented. The decision is based on the number and location of units being restored, and the extension and location of edentulous areas. Intraoral scans with reduced scan extension are indicated when fabricating tooth- and implant-supported crowns or short-span fixed prostheses, when the patient does not have more than one missing tooth in the area of the dental arch included in the scan. For the remaining clinical conditions, complete-arch intraoral scans are recommended. CLINICAL SIGNIFICANCE: Scan extension is a clinician's decision that should be based on the number and location of units being restored and the extension and location of edentulous areas. Intraoral scans with a reduced scan extension is recommended, when possible.

In vitro comparative study between complete arch conventional implant impressions and digital implant scans with scannable pick-up impression copings.

STATEMENT OF PROBLEM: Intraoral digital scan techniques have been widely used and sufficient evidence supports this technique in partially edentulous patients. However, the evidence supporting the use of intraoral scanners (IOSs) for edentulous patients is limited. PURPOSE: The purpose of this in vitro study was to measure and compare the accuracy of complete arch conventional pick-up implant impressions with open and closed trays, complete arch digital implant scans with IOSs, and 3-dimensional (3D) printed casts from complete arch digital implant scans. MATERIAL AND METHODS: Six implants were placed in a mandibular model. Scannable pick-up impression copings were inserted in the implants, scanned with a reference scanner, and exported in standard tessellation language (STL) format (Group Control). Splinted open-tray pick-up impressions (Group OT, n=5) and closed-tray pick-up impressions (Group CT, n=5) were made, and stone casts were fabricated. Digital scans (Group DS, n=5) were made with an IOS, and the STL files were exported to fabricate 3D printed casts (Group STL, n=5). Scannable pick-up impression copings were inserted in the dental implant analogs in Groups OT, CT, and STL and scanned with the reference scanner. Using a 3D inspection software program, the recording techniques were compared with the control. Root mean square (RMS) values were calculated from the control, and superimposed digitized casts from different recording techniques. Analysis of variance was used to determine differences in RMS values, and theTukey post hoc test was used to determine difference between different groups. RESULTS: Group CT had the lowest mean dimensional difference when superimposed with Group Control, followed by Groups DS, OT, and STL. Significant differences were found in RMS values between Control and digitized casts fabricated with different techniques (P<.05). The post hoc Tukey test revealed that Group DS (P<.05) was significantly different from the other groups, while no significant difference was found among Groups CT, OT, and STL (P>.05). CONCLUSIONS: Based on the findings of the present study, 3D printed casts from digital scans have the same accuracy as stone casts from conventional impressions in complete arch implant cases. Intraoral scans had the highest accuracy. Complete arch pick-up impression techniques using dual-functioning scannable pick-up impression copings are as accurate as splinted complete arch pick-up impressions.

Marginal fit and fracture resistance of polyetheretherketone, zirconia, and titanium implant-supported prosthesis frameworks for a partially edentulous arch after thermomechanical aging.

STATEMENT OF PROBLEM: Although polyetheretherketone (PEEK) and zirconia (Zir) have been used as implant-supported prosthesis (ISP) frameworks, the long-term effects of thermomechanical aging on the marginal fit and fracture resistance of PEEK and Zir ISP frameworks with titanium (Ti) bases for patients with a partially edentulous arch are not clear. PURPOSE: The purpose of this in vitro study was to determine the marginal fit and fracture resistance of PEEK and Zir ISP frameworks with Ti bases and Ti ISP frameworks for partially edentulous arches after aging. MATERIAL AND METHODS: A total of 30 ISP epoxy resin casts were obtained from a typodont with 1 straight implant (Nobel Biocare) in the mandibular right canine region and 1 implant with a 30-degree distal tilt in the mandibular right first molar region. All frameworks (n=10) were fabricated on their own epoxy resin cast with multiunit abutment replicas by using a computer-aided design and computer-aided manufacturing system (exocad-Yenadent). The PEEK and Zir frameworks were fabricated with Ti-bases. Primer (MKZ) and resin cement (DTK adhesive) were used to cement the frameworks to the Ti-bases under a static load of 10 N. After thermomechanical aging (1.2×106 cycles, 120 N, 5 °C-55 °C), marginal gaps between the Ti-bases and cemented frameworks and vertical and passive fits between the Ti-bases and framework and multi-unit abutments were measured by using a stereomicroscope (Euromex) at ×100 magnification. Fracture resistances and types were then determined by using a universal test machine and a stereomicroscope at ×40 magnification. Data were analyzed by using 1-way analysis of variance (ANOVA) and the Tukey HSD and Fisher-Freeman-Halton tests (α=.05). RESULTS: The marginal gaps of the PEEK and Zir frameworks were respectively 83.5 ±27.1 and 81.8 ±17.8 µm. PEEK (23.7 ±4.6) and Zir (32.9 ±8.7) had a better vertical fit (µm) than Ti (52.5 ±10.6) (P<.001). Zir (49.3 ±16.2) (P<.001) and PEEK (70.9 ±19.6) (P>.05) frameworks had better passive fit (µm) than Ti (91.3 ±24.2). Ti had the highest mean fracture resistance (N) (14800.2 ±3442.3) followed by Zir (7318.7 ±1385.1) and PEEK (3448.9 ±486.6) (P<.001). Fracture types were different in different groups (P<.001). CONCLUSIONS: The PEEK and Zir frameworks with Ti bases had better vertical and passive fit than the Ti frameworks. All ISP frameworks represented mean marginal fit below 92 µm and withstood physiologic occlusal forces after thermomechanical aging.

Exploring the impact of the extent of the partially edentulous area on the accuracy of two intraoral scanners.

STATEMENT OF PROBLEM: The accuracy of intraoral scans, particularly in edentulous areas, remains a concern despite the increasing use of digital technology, especially intraoral scanners. PURPOSE: The purpose of this in vitro study was to assess the impact of the extent of an edentulous area on the accuracy (trueness and precision) of intraoral scans from 2 intraoral scanners. MATERIAL AND METHODS: A KaVo dentoform with epoxy resin teeth was used to generate 9 groups with different numbers of teeth removed. A laboratory scanner served as the reference dataset, and 2 intraoral scanners (TRIOS 3 and Primescan AC) were evaluated. A single operator performed all scans following standardized protocols and calibration. Trueness and precision were assessed by using root mean square (RMS) values. Analysis of variance was used to compare trueness and precision values obtained from the 2 scanners and different partially edentulous conditions (α=.05). RESULTS: A significant difference was found in the trueness of intraoral scans of the 2 scanners and under different partially edentulous extensions. Primescan AC exhibited significantly lower trueness than TRIOS 3 (P<.001). For the individual edentulous conditions, Primescan had a significantly higher RMS mean than TRIOS 3 for G0, G3, G4, G6, G7, and G8 (P<.001) and a significantly lower RMS mean than TRIOS 3 for G1 and G4 (P<.001), while no significant difference in RMS mean was found between the 2 scanners for G2 (P=.999). For precision, no significant difference was found between the 2 scanners or different edentulous conditions [(F 8, 90)=1.82, P=.085]. CONCLUSIONS: The accuracy of intraoral scans was influenced by the length of edentulous areas and the scanner used. Primescan AC demonstrated lower trueness than TRIOS 3 for most partially edentulous conditions, while the scanners were similar in precision. These findings highlight the need for careful scanner selection in specific clinical situations, as scanning accuracy may vary depending on the scanner and edentulous condition.

Fabrication of complete dentures for an older patient with mobility impairment in three appointments: A dental technique.

OBJECTIVE: To describe the clinical procedures of complete denture set fabrication in three appointments. BACKGROUND: Simplified approaches have proven not to be inferior to conventional ones in terms of quality, patient satisfaction and masticatory ability. MATERIALS AND METHODS: The patient was a 77-year-old edentulous adult with mobility impairment seeking dental rehabilitation in a small number of appointments due to commuting difficulties. RESULTS: A set of complete dentures was delivered within three appointments. The second appointment was dedicated to set-up trial due to the patient's aesthetic demands. CONCLUSION: Under certain circumstances and after a thorough study of each case, dental clinicians may propose the fabrication of complete dentures in a three-appointment protocol incorporating a set-up trial session.

Exploring lived experiences on the usage of removable complete dentures among edentulous patients attending Makerere University Dental Hospital, Kampala, Uganda.

BACKGROUND: Edentulism remains a major disability worldwide, especially among the elderly population, although the prevalence of complete edentulism has declined over the last decades. In Uganda, the prevalence of edentulism in people aged 20 years and above is 1.8%. The therapy for edentulous patients can be realized through the use of conventional removable complete dentures, implant-supported prostheses, and computer-aided design and computer-aided manufacturing (CADCAM), however, the provision of removable complete dentures continues to be the predominant rehabilitation for edentulous patients. However, no published study has explored the lived experiences with removable complete dentures among the Ugandan population. The aim of the present study was to explore patients' lived experiences on the usage of removable complete dentures among Ugandan edentulous patients attending Makerere University Dental Hospital. METHODS: This was a qualitative study approach using purposive sampling. Fifteen (15) respondents were selected across social demographics. Interviews were recorded and transcribed and themes were generated to draw a deeper meaning to the usage of removable complete dentures. A qualitative statistical package, Atlas Ti software was used to generate themes from the interviews followed by an interpretation of the generated data and the results were presented as text and in a table. RESULTS: The reported key positive experiences due to removable complete denture rehabilitation were the improvement in speech, eating ability, regaining good facial appearance, better oral hygiene management, self-esteem and confidence to smile in public, and a feeling of completeness. However, respondents complained of pain and discomfort due to the looseness of dentures, inability to eat certain foods, and regular cleaning of dentures. The respondents did not go through proper informed consent processes before getting removable complete dentures. CONCLUSION: The study found that patients were satisfied with their removable complete dentures rehabilitation due to the positive experiences registered, such as the ability to eat and talk well, and restoration of self-esteem, all of which improved their quality of life. However, they experience pain and discomfort due to the looseness of dentures.

Evaluation of open-face maxillary complete denture for patients with prominent premaxilla: a crossover study.

BACKGROUND: The establishment of good facial esthetics is one of the main objectives of complete denture construction. Unfortunately, it may be the caused issue for patients having a prominent premaxilla due to excessive lip support by the labial flange of the maxillary denture. Open-face dentures (OFD) may suggest suitable prosthetic management for these patients. However, clinical evidence regarding the efficiency of OFD is scarce. METHODS: A total of 38 completely edentulous participants having prominent premaxilla and skeletal class I Angle's classification were enrolled in this study. Each participant received a mandibular complete denture and 2 opposing maxillary dentures; conventional (CD) and open-face (OFD). On the day of denture insertion, the participants were divided into 2 groups; CD-OFD and OFD-CD where CD-OFD group was instructed to use the mandibular denture and the maxillary CD for 3 months and then to use the maxillary OFD for another 3 months after a wash-out period of 2 weeks. While group OFD-CD was instructed to use the mandibular denture and the maxillary OFD for 3 months then to use the maxillary CD for another 3 months after a wash-out period of 2 weeks. The dislodging force of the maxillary dentures was evaluated using the universal testing machine and the patient perception of retention, esthetics, and comfort was evaluated using the Visual Analogue Scale (VAS). Evaluation was carried out 1 day, 1 month, and 3 months after denture insertion. The Student t-test was used to compare the 2 maxillary dentures and the intervals for each denture were compared by using the ANOVA test with repeated measures followed by a Post Hoc test (adjusted Bonferroni) for pairwise comparison. RESULTS: The significance of the obtained results was judged at the 5% level (P value). The dislodging force and patient perception of retention did not show significant differences between the 2 dentures, while the perception of esthetics showed significant differences throughout the follow-up period. Perception of comfort showed an insignificant difference only at the 3-month interval. CONCLUSIONS: Open-face maxillary dentures can be a suitable alternative for patients with prominent premaxilla to achieve satisfactory retention, aesthetics, and comfort.