Uptake of microplastics and impacts on plant traits of savoy cabbage.

Anthropogenic influences such as plastic pollution are causing serious environmental problems. While effects of microplastics on marine organisms are well studied, less is known about effects of plastic particles on terrestrial organisms such as plants. We investigated the effects of microplastic particles on different growth and metabolic traits of savoy cabbage (Brassica oleracea var. sabauda). Sections of seedlings exposed to polystyrene particles were analysed by coherent Raman scattering microscopy. These analyses revealed an uptake of particles in a size range of 0.5 µm to 2.0 µm into cells of the hypocotyl. Furthermore, plants were grown in substrate amended with polyethylene and polystyrene particles of different sizes (s1: 200-500 µm; s2: 100-200 µm; s3: 20-100 µm; s4: < 100 µm, with most particles < 20 µm; s5: < 20 µm) and in different concentrations (c1 = 0.1%, c2 = 0.01%, c3 = 0.001%). After several weeks, shoot and root biomass were harvested. Leaves were analysed for their carbon to nitrogen ratio, while amino acid and glucosinolate composition were measured using high performance liquid chromatography. Plastic type, particle size and concentration showed distinct effects on certain plant traits. Shoot biomass was interactively influenced by size and concentration of polyethylene, while root biomass was not modified by any of the plastic exposure treatments. Likewise, the composition and total concentrations of leaf amino acids were not affected, but the leucine concentration was significantly increased in several of the plastic-exposed plants. Glucosinolates were also slightly altered, depending on the particle size. Some of the observed effects may be independent of plastic uptake, as larger particles were not taken up but still could affect plant traits. For example, in the rhizosphere plastic particles may increase the water holding capacity of the soil, impacting some of the plant traits. In summary, this study shows how important the plastic type, particle size and concentration are for the uptake of microplastics and their effects on plant traits, which may have important implications for crops, but also for ecosystems.

Brassica oleracea L. var. italica Aquaporin Reconstituted Proteoliposomes as Nanosystems for Resveratrol Encapsulation.

Aquaporins (AQPs), membrane proteins responsible for facilitating water transport, found in plant membrane vesicles (MV), have been related to the functionality and stability of MV. We focused on AQPs obtained from broccoli, as they show potential for biotechnological applications. To gain further insight into the role of AQPs in MV, we describe the heterologous overexpression of two broccoli AQPs (BoPIP1;2 and BoPIP2;2) in Pichia pastoris, resulting in their purification with high yield (0.14 and 0.99 mg per gram cells for BoPIP1;2 and BoPIP2;2). We reconstituted AQPs in liposomes to study their functionality, and the size of proteoliposomes did not change concerning liposomes. BoPIP2;2 facilitated water transport, which was preserved for seven days at 4 °C and at room temperature but not at 37 °C. BoPIP2;2 was incorporated into liposomes to encapsulate a resveratrol extract, resulting in increased entrapment efficiency (EE) compared to conventional liposomes. Molecular docking was utilized to identify binding sites in PIP2s for resveratrol, highlighting the role of aquaporins in the improved EE. Moreover, interactions between plant AQP and human integrin were shown, which may increase internalization by the human target cells. Our results suggest AQP-based alternative encapsulation systems can be used in specifically targeted biotechnological applications.

Red cabbage extract immobilized in bacterial cellulose film as an eco-friendly sensor to monitor microbial contamination and gamma irradiation of stored cucumbers.

The aim of the present study is to develop a pH-sensing biopolymer film based on the immobilization of red cabbage extract (RCE) within bacterial cellulose (BC) to detect contamination and gamma radiation exposure in cucumbers. The results obtained show a sensitivity to pH changes for RCE in its aqueous form and that incorporated within BC films (RCE-BC), both showed color change correlated to bacterial growth (R2 = 0.91), this was supported with increase in pH values from 2 to 12 (R2 = 0.98). RCE and RCE-BC exposure to gamma radiation (0, 2.5, 5, 10, 15, 20, 25 kGy) resulted in gradual decrease in color that was more evident in RCE aqueous samples. To sense bacterial contamination of cucumbers, the total count was followed at 0, 5, 10 and 15 days in cold storage conditions and was found to reach 9.13 and 5.47 log cfu/mL for non-irradiated and 2 kGy irradiated samples, respectively. The main isolates detected throughout this storage period were identified as Pseudomonas fluorescens, Erwinia sp. Pantoea agglomerans using matrix assisted laser desorption ionization-time of flight-ms (MALDI-TOF-MS). Bacterial growth in stored irradiated cucumbers was detected by color change within 5 and 10 days of storage, after which there was no evident change. This is very useful since contamination within the early days of storage cannot be sensed with the naked eye. This study is the first to highlight utilizing RCE and RCE-BC as eco-friendly pH-sensing indicator films for intelligent food packaging to detect both food contamination and gamma preservation for refrigerator stored cucumbers.

Effects of Exogenous Ergothioneine on Brassica rapa Clubroot Development Revealed by Transcriptomic Analysis.

Clubroot disease is a soil-borne disease caused by Plasmodiophora brassicae that leads to a serious yield reduction in cruciferous plants. In this study, ergothioneine (EGT) was used to culture P. brassicae resting spores, the germination of which was significantly inhibited. Further exogenous application of EGT and P. brassicae inoculation in Chinese cabbage showed that EGT promoted root growth and significantly reduced the incidence rate and disease index. To further explore the mechanism by which EGT improves the resistance of Chinese cabbage to clubroot, a Chinese cabbage inbred line BJN3-2 susceptible to clubroot treated with EGT was inoculated, and a transcriptome analysis was conducted. The transcriptome sequencing analysis showed that the differentially expressed genes induced by EGT were significantly enriched in the phenylpropanoid biosynthetic pathway, and the genes encoding related enzymes involved in lignin synthesis were upregulated. qRT-PCR, peroxidase activity, lignin and flavonoid content determination showed that EGT promoted the lignin and flavonoid synthesis of Chinese cabbage and improved its resistance to clubroot. This study provides a new insight for the comprehensive prevention and control of cruciferous clubroot and for further study of the effects of EGT on clubroot disease.

Detection of superoxide radical in all biological systems by Thin Layer Chromatography.

The study presents a new method that detects O2•-, via quantification of 2-hydroxyethidium (2-ΟΗ-Ε+) as low as ∼30 fmoles by High-Performance Thin Layer Chromatography (HPTLC). The method isolates 2-ΟΗ-Ε+ after its extraction by the anionic detergent SDS (at 18-fold higher than its CMC) together with certain organic/inorganic reagents, and its HPTLC-separation from di-ethidium (di-Ε+) and ethidium (Ε+). Quantification of 2-OH-E+ is based on its ex/em maxima at 290/540 nm, and of di-E+ and E+ at 295/545 nm. The major innovations of the present method are the development of protocols for (i) efficient extraction (by SDS) and (ii) sensitive quantification (by HPTLC) for 2-OH-E+ (as well as di-E+ and E+) from most biological systems (animals, plants, cells, subcellular compartments, fluids). The method extracts 2-ΟΗ-Ε+ (by neutralizing the strong binding between its quaternary N+ and negatively charged sites on phospholipids, DNA etc) together with free HE, while protects both from biological oxidases, and also extracts/quantifies total proteins (hydrophilic and hydrophobic) for expressing O2•- levels per protein quantity. The method also uses SDS (at 80-fold lower than its CMC) to extract/remove/wash 2-ΟΗ-Ε+ from cell/organelle exterior membrane sites, for more accurate internal content quantification. The new method is applied on indicative biological systems: (1) artificially stressed (mouse organs and liver mitochondria and nuclei, ±exposed to paraquat, a known O2•- generator), and (2) physiologically stressed (cauliflower plant, exposed to light/dark).

Waste Cabbage-Integrated Nutritional Superabsorbent Polymers for Water Retention and Absorption Applications.

To alleviate soil impoverishment and water shortage in desert areas, as well as to reduce the impact of waste cabbage on the environment and human health, we used waste cabbage as a substrate, 2-acrylamide-2-methyl-1-propane sulfonic acid (AMPS) and acrylic acid (AA) as polymerization units, and NH4Cl and KNO3 as nutriment to obtain two waste cabbage-superabsorbent polymers (CB-SAPNH4Cl and CB-SAPKNO3) by the one-pot method. The chemical structure, thermal stability, and morphology of the polymers were investigated by Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and scanning electron microscope (SEM). Meanwhile, the water retention, water absorption, and salt resistance were compared with the purchased polymers. The results showed that the nutriment was successfully encapsulated inside the polymer, and CB-SAPNH4Cl and CB-SAPKNO3 at 1% nutrient concentration showed excellent water retention properties, salt resistance, and water absorption performance of 1546 and 1131 g/g (distilled water), 306 and 277 g/g (tap water), and 116 and 91 g/g (0.9% NaCl solution). Therefore, they are highly promising materials for the application.

Effect of foliar and root exposure to polymethyl methacrylate microplastics on biochemistry, ultrastructure, and arsenic accumulation in Brassica campestris L.

Despite the serious risk of microplastic pollution in the roots and leaves of crops, the phytotoxicity of microplastics (introduced via different exposure routes) in leafy vegetables remain insufficiently understood. Here, the effects of the root and foliar exposure of polymethyl methacrylate microplastic (PMMAMPs) on phytotoxicity, As accumulation, and subcellular distribution were investigated in rapeseed (Brassica campestris L). The relative chlorophyll content under PMMAMPs treatment decreased with time, and the 0.05 g L-1 root exposure decreased it significantly (by 9.97-20.48%, P < 0.05). In addition, superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR), and ascorbate peroxidase (APX) activities in rapeseed were more sensitive to PMMAMPs introduced through root exposure than through foliar exposure. There was dose-dependent ultrastructural damage, and root exposure had a greater impact than foliar exposure on root tip cells and chloroplasts. PMMAMPs entered the shoots and roots of rapeseed through root exposure. Under foliar exposure, PMMAMPs promoted As accumulation in rapeseed by up to 75.6% in shoots and 68.2% in roots compared to that under control (CK). As content in cell wall under PMMAMP treatments was 3.6-5.3 times higher than that of CK, as indicated by subcellular component results. In general, root exposure to PMMAMPs resulted in a stronger physiological impact and foliar exposure led to increased As accumulation in rapeseed.

Preparation, Characterization, and In Vitro Anticancer Activity Evaluation of Broccoli-Derived Extracellular Vesicle-Coated Astaxanthin Nanoparticles.

Astaxanthin (AST) is a type of ketone carotenoid having significant antioxidation and anticancer abilities. However, its application is limited due to its low stability and bioavailability. In our study, poly (lactic-co-glycolic acid) (PLGA)-encapsulated AST (AST@PLGA) nanoparticles were prepared by emulsion solvent evaporation method and then further processed by ultrasound with broccoli-derived extracellular vesicles (BEVs), thereby evolving as BEV-coated AST@PLGA nanoparticles (AST@PLGA@BEVs). The preparation process and methods were optimized by three factors and three levels of response surface method to increase drug loading (DL). After optimization, the DL was increased to 6.824%, and the size, polydispersity index, and zeta potential of AST@PLGA@BEVs reached 191.60 ± 2.23 nm, 0.166, and -15.85 ± 0.92 mV, respectively. Moreover, AST@PLGA@BEVs exhibited more notable anticancer activity than AST in vitro. Collectively, these results indicate that the method of loading AST in broccoli-derived EVs is feasible and has important significance for the further development and utilization of AST as a functional food.

Cabbage-derived three-dimensional cellulose scaffold-induced osteogenic differentiation of stem cells.

Herbal-derived three-dimensional scaffolds have a unique structure that represents the natural cellular microenvironment and can be potentially used for tissue engineering applications. In the present study, cabbage (Cb) leaves were decellularized and then their characteristics, such as surface roughness, wettability, porosity, mechanical properties, and specific surface area, were investigated. After that, scaffold osteoinductivity was studied by bone-marrow-derived mesenchymal stem cells (BM-MSCs) osteogenic differentiation while growing on the decellularized Cb leaves. Cells mineralization, calcium secretion, alkaline phosphatase (ALP) activity, and expression levels of bone-related genes were determined during the differentiation process. Our results from the structural characterization of the scaffolds demonstrated that decellularized Cb leaves are good candidates for bone differentiation in terms of surface roughness, mechanical properties, and interconnected pores. Osteogenic differentiation evaluation of the BM-MSCs determined that the cell's ALP activity and mineralization were increased significantly while cultured on the decellularized Cb leaves compared to the cells cultured on the culture plate as a control. Besides, Runx2, ALP, collagen-1 (Col-I), and osteocalcin genes were expressed in cells cultured on decellularized Cb leaves significantly higher than cells cultured on the culture plate. Based on these results, it can be concluded that the decellularized Cb scaffold has great potential for promoting BM-MSCs proliferation and osteogenic differentiation.

Influences of different source microplastics with different particle sizes and application rates on soil properties and growth of Chinese cabbage (Brassica chinensis L.).

The potentially negative effects of microplastics (MP) on agroecosystems have raised worldwide concerns. However, little is known about the negative effects of MP exposure on the soil-plant system. To fill up this knowledge gap, a pot experiment was set up, and two different MP types [high density polyethylene (HDPE) and general purpose polystyrene (GPPS)] were used, which had four particle sizes (<25, 25-48, 48-150, and 150-850 µm) at four application rates (2.5, 5, 10, and 20 g MP kg-1 soil). Some soil properties and the growth of Chinese cabbage (Brassica chinensis L.) were monitored. The results showed that (1) MP application with high application rates and relatively small particle sizes significantly enhanced the soil urease activity, which accompanied with enhanced soil pH and decreased soil available concentrations of phosphorus and potassium in some cases. (2) The exposure of MP did not significantly affect the activity of soil catalase regardless of their application rates and sizes. MP with different application rates and small sizes significantly reduced the soil sucrase activity, but the largest size of MP enhanced the activity of soil sucrase. (3) GPPS at 10-20 g kg-1 or with the sizes of <25 and 48-150 µm significantly reduced the fresh weight of Chinese cabbage, but the addition of HDPE had no remarkable effects on the fresh weight regarding of its application rates or sizes. (4) MP with high application rates and large sizes enhanced but small sizes of MP reduced the leaf soluble sugar concentration. The increasing application rates of MP and small size HDPE significantly reduced the starch concentration in the leaves of Chinese cabbage, however, the different sizes of GPPS showed limited effects on the leaf starch. The addition of MP with increasing application rates and different sizes always reduced the concentration of leaf chlorophyll. These parameters regarding to plant and soil could be used to assess the risks of MP pollution in the soil-plant systems. We found that the risks resulting from MP pollution were MP type-dependent and particle size-dependent. These findings indicate that overaccumulation of MP in the agriculture may possess an ecology risk and will negatively affect the agricultural sustainability and the food safety.

A multifunctional near-infrared fluorescent sensing material based on core-shell upconversion nanoparticles@magnetic nanoparticles and molecularly imprinted polymers for detection of deltamethrin.

The construction of multifunctional sensors has attracted considerable attention due to their multifunctional properties, such as high sensitivity and rapid detection. Herein, near-infrared multifunctional fluorescent sensing materials based on core-shell upconversion nanoparticle@magnetic nanoparticle and molecularly imprinted polymers were synthesized for rapid detection of deltamethrin. The difunctional core-shell upconversion nanoparticle@magnetic nanoparticle was introduced as the optical signal and rapid separator. Firstly, the difunctional core-shell materials were prepared through solvothermal method. Then, molecularly imprinted polymers (MIPs) as recognition elements for deltamethrin were coated on the surface of upconversion nanoparticle@magnetic nanoparticle through polymerization. The structure and recognition characterizations of multifunctional fluorescent sensing materials were evaluated. Under optimal condition, the imprinting factor of sensing materials was 3.63, and the fluorescence intensity of sensing materials decreased linearly with increasing concentration of deltamethrin from 0.001 to 1 mg L-1 with a detection limit of 0.749 µg L-1, and a relative standard deviation of 3.10% was obtained with 5 mg L-1 deltamethrin. The sensing materials showed a high selectivity and were successfully utilized for the detection of deltamethrin in grapes and cabbages; the results showed that the recoveries for two samples obtained were 95.6-102% and 91.8-105%.

Screening of the proteins related to the cultivar-dependent cadmium accumulation of Brassica parachinensis L.

Cultivar-dependent cadmium (Cd) accumulation was principal in developing Cd-pollution safe cultivars (PSCs). Proteins related to different Cd accumulations of the low-Cd-accumulating (SJ19) and high-Cd-accumulating (CX4) cultivars were investigated by iTRAQ analysis. Higher Cd bioaccumulation factors and translocation factor in CX4 than in SJ19 were consistent with the cultivar-dependent Cd accumulations. The Cd uptake was promoted in CX4 due to its higher expression of Cd-binding proteins and the lower expression of Cd-efflux proteins in roots. What's more, significantly elevated thiol groups (PC2 and PC3) in CX4 under Cd stress might contribute to the high Cd accumulation in roots and the root-to-shoot translocation of Cd-PC complex. Up-regulated proteins involved in cellulose biosynthesis and pectin de-esterification in SJ19 enhanced the Cd sequestration of root cell walls, which was considered as the predominant strategy for reducing Cd accumulation in shoots. The present study provided novel insights in the cultivar-dependent Cd accumulation in shoots of B. parachinensis.

Magnetic solid phase extraction sorbents using methyl-parathion and quinalphos dual-template imprinted polymers coupled with GC-MS for class-selective extraction of twelve organophosphorus pesticides.

A novel magnetic dual-template molecularly imprinted polymer (DMIP) was prepared with methyl-parathion and quinalphos as templates. For comparison, a series of single-template polymers with only methyl-parathion (MPMIP) or quinalphos (QPMIP) as template as well as a non-imprinted polymer (NIP) in the absence of the template, were synthesized using the same procedure of DMIP. The obtained MIPs were characterized by scanning electron microscopy(SEM), Fourier transform infrared (FT-IR) spectroscopy, vibrating sample magnetometer (VSM), and X-ray diffraction (XRD). The properties including kinetic effect, thermodynamic effect, selectivity, and reusability of MIPs were investigated . Only DMIP possessed high affinity and good recognition for all twelve OPPs including quinalphos, isazophos, chlorpyrifos-methyl, chlorpyrifos, methidathion, triazophos, profenofos, fenthion, fenitrothion, methyl-parathion, parathion, and paraoxon in comparison to MPMIP, QPMIP, or NIP. Moreover, DMIP was used as magnetic solid phase extraction (MSPE) sorbent for the pre-concentration of twelve OPPs in cabbage samples. The developed DMIP-MSPE-GC-MS method showed high sensitivity, low LODs (1.62-13.9 ng/g), fast adsorption equilibrium (10 min), and acceptable spiked recoveries (81.5-113.4%) with relative standard deviations (RSD) in the range 0.05-7.0% (n = 3). The calibration plots were linear in the range 10-800 ng/mL with coefficients of determination (R2) better 0.99 for all twelve compounds. These results suggest that the DMIP is applicable for rapid determination and high throughput analysis of multi-pesticide residues. Graphical abstract.

Influence of photoluminophore-modified agro textile spunbond on growth and photosynthesis of cabbage and lettuce plants.

Light-converting polypropylene spunbond was first used in the study of the key physiological parameters of plants. A comparative study of the functioning of the photosynthetic apparatus and the dynamics of growth in late cabbage plants (Olga variety) and leaf lettuce (Emerald variety) was conducted using the ordinary nonwoven polypropylene fabric (spunbond) (density 30 g·m-2) and the spunbond containing a photoluminophore (PL) (1.6% yttrium oxysulfide doped with europium). The plants were grown in a glass greenhouse without spunbond and under the spunbond containing and not containing the PL that transforms a part of UV-radiation into red light radiation. The use of the spunbond led to a decrease in the rate of photosynthesis, activity of the photosystem 2, and the accumulation of plant biomass and to an increase in the stomatal conductance. By contrast to unmodified spunbond, the application of the spunbond containing the PL led to an increase in the rate of photosynthesis, the water-use efficiency (WUE), and the accumulation of the total biomass of plants by 30-50% but to a decrease in the transpiration rate and the stomatal conductance. It is assumed that the positive effect of the PL is associated with an increase in the fraction of fluorescent red light, which enhances photosynthetic activity and accelerates plant growth.

DNA-templated copper nanoclusters as a fluorescent probe for fluoride by using aluminum ions as a bridge.

A selective fluorescent on-off-on probe has have designed for the detection of fluoride (F-) ions based on DNA-templated copper nanocluster (CuNCs) and by using aluminum(III) ions as a bridge. A 40-mer polythymine acts as a template for the reduction of Cu(II) to Cu(0) by ascorbic acid. This result is the formation of red fluorescent CuNCs, with excitation/emission peaks at 340/640 nm. After addition of Al3+ ions, the fluorescence of CuNCs is quenched because the interaction of Al3+ and DNA disturbs the formation of DNA-templated CuNCs. Fluorescence is restored on addition of fluoride to the system. This is due to the desorption of Al3+ from the DNA and the formation of the Al(OH)3F- complex. This system displays a fast fluorometric response to fluoride, with high selectivity over other anions. Fluorescence increases linearly in the 2 to 150 µM F- concentration range, and the detection limit is 1.0 µM. This probe has been successfully used for the detection of F- ions in four brands of toothpaste. The method is rapid, cost-effective, selective, and does not require toxic solvents and reagents. Graphical abstract Schematic presentation of a method for fluorometric determination of fluoride by using DNA-templated copper nanoclusters (CuNCs) and using aluminum(III) as a bridge. The red fluorescence of the CuNCs is quenched in the presence of Al(III) ions but restored after addition of fluoride.

Effect of pretreatment with organic solvent on enzymatic digestibility of cauliflower wastes.

The present study investigated the operational conditions for different pretreatment approaches and subsequent enzymatic hydrolysis of cauliflower wastes (stalk and leaf) for better release of fermentable sugars. The structural analysis of raw and pretreated lignocellulosic biomasses was investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transforms infrared (FTIR) analysis. Results demonstrated that the highest cellulose conversion rate and removal of most of the hemicellulose and lignin were obtained with organosolvent pretreatment. Using methanol in presence of sodium (Na) acetate was most effective in delignification of cauliflower wastes. In the present study, methanol (100% v/v) in presence of 0.1 M Na-acetate at 121 °C for 45 and 60 min for stalk and leaf, respectively, gave maximum reducing sugar yield. Response surface methodology was used to optimize different process parameters for enzymatic saccharification using microbial cellulase and xylanase. The optimum operation condition of enzymatic hydrolysis of organosolvent pretreated cauliflower wastes were substrate loading (2.5% w/v for both stalk and leaf), enzyme loading (15 and 10 U/g for stalk and leaf, respectively), pH (4.46 and 5.48 for stalk and leaf, respectively), at 60 °C and for 180 min.

Glyceamic and insulinaemic response to mashed potato alone, or with broccoli, broccoli fibre or cellulose in healthy adults.

PURPOSE: To examine the role of realistic serving sizes of broccoli, broccoli fibre and cellulose co-consumed with mash potato, or mashed potato eaten alone, on glycaemic and insulinaemic responses (GR and IR) in healthy adults. METHOD: A non-blind randomized crossover trial was conducted with thirteen healthy subjects consuming four different meals. Capillary blood samples between 0 and 180 min were analysed for glucose and insulin. The incremental area under the fasting blood glucose and insulin curves (iAUC) was calculated for different time increments. Differences in GR and IR between meals were assessed by repeated measures analysis of variance. RESULTS: The immediate GR and IR to one serving of mashed potato eaten with two servings of broccoli were significantly lower than mashed potato eaten alone. The peak, incremental peak and iAUC0-30min for GR and iAUC0-30min for IR were all significantly lower for the broccoli-potato meal. This meal also takes longer to return to fasting baseline with a time-delayed lag in IR and GR compared to the potato only meal. The iAUC60-120min for IR was significantly greater for the broccoli-potato meal compared to the other meals. Yet there was no corresponding significant difference between the broccoli-potato meal and the other meals for peak, incremental peak IR or any other iAUCs for GR and IR. For the potato meals containing added broccoli fibre or cellulose, no significant differences in GR or IR were observed when compared with the potato eaten alone. CONCLUSION: Co-consumption of cooked broccoli with mashed potato has a significant effect on glycaemic and insulinaemic responses compared to potato eaten alone. Our study suggests broccoli eaten with potato improves glucose homeostasis and therefore indicates a general beneficial nutritional role for broccoli when eaten with a carbohydrate staple.

Isolation of sinapic acid from broccoli using molecularly imprinted polymers.

A molecularly imprinted polymer was synthesized for the purpose of sinapic acid isolation from Egyptian nutraceutical Botrytis italica, L. (broccoli) due to its prominent medicinal and wide pharmacological activities. A computational study was first developed to determine the optimal template to functional monomer molar ratio. Based on the computational results, five polymers were synthesized using a bulk polymerization method with sinapic acid as the template molecule. Evaluation of the synthesized polymers binding performance was carried out using batch rebinding assay, which revealed that the molecularly imprinted polymer of molar ratio (1:4:20), template to functional monomer (4-vinyl pyridine) to crosslinker (ethylene glycol dimethacrylate) was of optimum performance, thus, this polymer was applied for sinapic acid isolation from closely related analogues. This represents a more practical approach to isolate sinapic acid from different natural extracts selectively.

Molasses melanoidin-like products enhance phytoextraction of lead through three Brassica species.

Previously, it has been suggested that melanoidin-like products (MLP) from sugarcane molasses may accelerate copper phytoextraction. In this study, we evaluated the facilitatory effect of MLP on phytoextraction in a medium including cadmium or lead, the concentrations of which were adjusted around the regulation values of the Soil Contamination Countermeasures Act in Japan. Three Brassica species were tested based on their fast growth, high biomass productivity, and high heavy metal absorption. Both biomass and lead uptake in the nutrient medium with 1 mM lead nitrate were significantly increased by the addition of MLP, and almost all of the lead was accumulated in the root tissue. Therefore, MLP were able both to detoxify lead ions and to improve their bioavailability in Brassica species. In contrast, only these species with MLP or citric acid survived in the nutrient medium with 1 mM cadmium sulfate. The phytoextraction of cadmium using these species was therefore impractical under the Act.

A sensitive chemiluminescence enzyme immunoassay based on molecularly imprinted polymers solid-phase extraction of parathion.

The chemiluminescence enzyme immunoassay (CLEIA) method responds differently to various sample matrices because of the matrix effect. In this work, the CLEIA method was coupled with molecularly imprinted polymers (MIPs) synthesized by precipitation polymerization to study the matrix effect. The sample recoveries ranged from 72.62% to 121.89%, with a relative standard deviation (RSD) of 3.74-18.14%.The ratio of the sample matrix-matched standard curve slope rate to the solvent standard curve slope was 1.21, 1.12, 1.17, and 0.85 for apple, rice, orange and cabbage in samples pretreated with the mixture of PSA and C18. However, the ratio of sample (apple, rice, orange, and cabbage) matrix-matched standard-MIPs curve slope rate to the solvent standard curve was 1.05, 0.92, 1.09, and 1.05 in samples pretreated with MIPs, respectively. The results demonstrated that the matrices of the samples greatly interfered with the detection of parathion residues by CLEIA. The MIPs bound specifically to the parathion in the samples and eliminated the matrix interference effect. Therefore, the CLEIA method have successfully applied MIPs in sample pretreatment to eliminate matrix interference effects and provided a new sensitive assay for agro-products.