Surface engineering of polyester-degrading enzymes to improve efficiency and tune specificity.

Certain members of the carboxylesterase superfamily can act at the interface between water and water-insoluble substrates. However, nonnatural bulky polyesters usually are not efficiently hydrolyzed. In the recent years, the potential of enzyme engineering to improve hydrolysis of synthetic polyesters has been demonstrated. Regions on the enzyme surface have been modified by using site-directed mutagenesis in order to tune sorption processes through increased hydrophobicity of the enzyme surface. Such modifications can involve specific amino acid substitutions, addition of binding modules, or truncation of entire domains improving sorption properties and/or dynamics of the enzyme. In this review, we provide a comprehensive overview on different strategies developed in the recent years for enzyme surface engineering to improve the activity of polyester-hydrolyzing enzymes.

Proinflammatory mediators related to orthodontically induced periapical root resorption in rat mandibular molars.

OBJECTIVES: The early phase of orthodontic tooth movement involves acute inflammatory response that may induce bone resorption. The aim of this study was to localize and quantify cells in the periodontium expressing proinflammatory mediators during orthodontically induced periapical root resorption of the rat mandibular molars. MATERIALS AND METHODS: The levels of proinflammatory cytokines interleukin-1 (IL-1) α and ß, tumor necrosis factor-α (TNF-α), inflammatory enzymes cyclooxygenase (COX) 1 and 2, and their product prostaglandin E2 (PGE2) in the root resorption site were compared to those in the corresponding area of the untreated periodontal ligament (PDL) of physiologically drifting teeth. Continuous heavy orthodontic force was applied to the mandibular first molar for 8 and 15 days while in occlusion to induce root resorption. Frozen sections including root resorption lacunae were analyzed for the activity of non-specific esterase (NSE) and tartrate-resistant acid phosphatase (TRAP) by enzyme histochemistry and for the expression of IL-1α, IL-1ß, TNF-α, COX-1, COX-2, and PGE2 by immunohistochemistry. RESULTS: The active root resorption lacunae had significantly more TRAP-positive multinucleated odontoclasts, whereas the number of NSE-positive cells of the monocyte-macrophage lineage did not differ from that in the control PDL. Several types of periodontal cells exhibited a significant increase in the expression of IL-1α, IL-1ß, TNF-α, COX-2, and PGE2 in the root resorption zone, while COX-1 was rarely detected. CONCLUSIONS: These data suggest that proinflammatory mediators expressed in periodontal cells may synergistically promote apical root resorption in response to continuous heavy mechanical force applied to teeth.

Fabrication and characterization of polyvinyl alcohol-chitosan composite nanofibers for carboxylesterase immobilization to enhance the stability of the enzyme.

Electrospinning stands out as a flexible and viable method, presenting designed nanoscale materials with customized properties. This research demonstrates the immobilization of carboxylesterase protein Ha006a, reported for its adequacy in pesticide bioremediation by utilizing the electrospinning strategy. This strategy was utilized to create nanofibers by incorporating variable mixtures of biodegradable and cost-effective polyvinyl alcohol (PVA)-chitosan (CS) nanofiber solution (PVA100, PVA96, PVA94, PVA92 and PVA90). All the mixtures were electrospun at a reliable voltage of 21 kV, maintaining a gap of 12 cm from the nozzle. The Ha006a, sourced from Helicoverpa armigera, was consolidated into the optimized PVA90 polymer mixture. The electrospun nanofibers experienced comprehensive characterization utilizing distinctive microscopy and spectroscopy procedures counting FESEM, TGA, XRD and FTIR. The comparative investigation of the esterase property, ideal parameters and stability of the unbound and bound/immobilized Ha006a was scrutinized. The results uncovered an essential elevation in the ideal conditions of enzyme activity post-immobilization. The PVA-CS control nanofiber and Ha006a-PVA-CS showed a smooth structure, including an average breadth of around 170.5 ± 44.2 and 222.5 ± 66.5 nm, respectively. The enzyme-immobilized nanofibers displayed upgraded stability and comprehensive characterization of the nanofiber, which guaranteed genuineness and reproducibility, contributing to its potential as a potent device for bioremediation applications. This investigation opens the way for the manufacture of pesticide-resistant insect enzyme-based nanofibers, unlocking their potential for assorted applications, counting pesticide remediation and ensuring environmental sustainability.

Optimization of polyethylene terephthalate biodegradation using a self-assembled multi-enzyme cascade strategy.

Although many efforts have been devoted to the modification of polyethylene terephthalate (PET) hydrolases for improving the efficiency of PET degradation, the catalytic performance of these enzymes at near-ambient temperatures remains a challenge. Herein, a multi-enzyme cascade system (PT-EC) was developed and validated by assembling three well-developed PETases, PETaseEHA, Fast-PETase, and Z1-PETase, respectively, together with carboxylesterase TfCa, and hydrophobic binding module CBM3a using scaffold proteins. The resulting PT-ECEHA, PT-ECFPE, PT-ECZPE all demonstrated outstanding PET degradation efficacy. Notably, PT-ECEHA exhibited a 16.5-fold increase in product release compared to PETaseEHA, and PT-ECZPE yielded the highest amount of product. Subsequently, PT-ECs were displayed on the surface of Escherichia coli, respectively, and their degradation efficiency toward three PET types was investigated. The displayed PT-ECEHA exhibited a 20-fold increase in degradation efficiency with PET film compared to the surface-displayed PETaseEHA. Remarkably, an almost linear increase in product release was observed for the displayed PT-ECZPE over a one-week degradation period, reaching 11.56 ± 0.64 mM after 7 days. TfCaI69W/L281Y evolved using a docking-based virtual screening strategy showed a further 2.5-fold increase in the product release of PET degradation. Collectively, these advantages of PT-EC demonstrated the potential of a multi-enzyme cascade system for PET bio-cycling.

Carboxylesterase-triggered hydrolysis of nanoparticle PEGylating agents.

Despite the importance of PEGylation in achieving long nanoparticle circulation times, many nanoparticles are coated with PEGylating agents susceptible to enzymatic degradation. In this study, solid lipid nanoparticles (SLNs) prepared with ester-containing compounds were evaluated for their stability in the presence of carboxylesterase. SLN suspensions became turbid within 30 min of enzymatic exposure, indicating possible disassociation of a portion of the nanoparticles. The particle size of SLNs incubated with the enzyme was smaller than the size of controls, although their morphologies appeared similar in transmission electron microscopy images. Although SLNs offered some protection over micelles, PEG6000 monostearate was rapidly degraded within 15 min. Hydrolysis of polysorbate 60 was much slower, reaching only 36% in 2 h. These studies reveal the importance of confirming the stability of PEG surface coatings prior to undertaking in vivo experiments in small animal models, which can have considerably higher plasma esterase activity than humans.

Organophosphate pesticide environmental exposure: analysis of salivary cholinesterase and carboxilesterase activities in preschool children and their mothers.

A pilot study was conducted to evaluate the usefulness of salivary cholinesterase and carboxylesterase as biomarkers of exposure to environmental organophosphate pesticides. Ninety samples were obtained from women and 62 samples from their preschool-aged children who live near an agricultural area of the Upper Valley of the Negro River (Patagonia, Argentina) where pesticides are applied 6 months a year. Each participant donated two samples under similar conditions: one in the pre-exposure period and another during the pulverization period. Demographic information, potential confounders, and risk behaviors were registered. Active or passive smoking had no effect on these enzyme activities in either group. During the pulverization period, cholinesterase activity was not detectable in 76% of the children's samples and 23% of the mothers' samples. Comparing samples collected during the pulverization period with respect to the pre-pulverization period, the average mother and child cholinesterase activity decreased by 65.7% (p < 0.001) and 85.8% (p < 0.001), respectively. Also, mother and child carboxylesterase activity decreased by 27.5% (p < 0.001) and 41.9% (p < 0.01), respectively. Child carboxylesterase activity in the pulverization period was associated to the habit of eating dust outdoors (p < 0.01). The most frequent inhibition levels observed for cholinesterase and carboxylesterase activity were between 70-100% and 0-29%, respectively, in both groups studied. This shows that at the same level of exposure, cholinesterase was more sensitive to inhibition than carboxylesterase. Therefore, carboxylesterase might more properly reflect the degree of environmental organophosphate exposure and may have potential as a novel tool for biomonitoring.

Polymer micelles with hydrazone-ester dual linkers for tunable release of dexamethasone.

PURPOSE: To develop polymer micelles for the tunable release of Dexamethasone (DEX) in tumors. METHODS: DEX was conjugated to poly(ethylene glycol)-poly(aspartate) block copolymers using hydrazone, ester, or hydrazone-ester dual linkers. Ketonic acids containing 3, 4, and 5 methylene groups were used as spacers to separate the dual linkers. Polymer micelles from the DEX-conjugated polymers were tested for drug release at different pH values and carboxylesterase activity levels. RESULTS: DLS measurements and (1)H-NMR analysis confirmed all DEX-loaded micelles were <100 nm with core-shell structure. Single linker micelles appeared unsuitable to release DEX preferentially in acidic tumor tissues. Hydrazone linkages between DEX and polymers were non-degradable at both pH 7.4 and 5.0. Ester linkages stable at pH 5.0 were unstable at pH 7.4. Hydrazone-ester dual linkers suppressed DEX release at pH 7.4 while accelerating drug release at pH 5.0. DEX release decreased at pH 5.0 as the length of ketonic acid increased but was independent of spacer length at pH 7.4. Dual linker micelles were stable in the presence of carboxylesterases, suggesting DEX release was primarily due to pH-dependent hydrolysis. CONCLUSION: Tunable release of DEX was achieved using pH-sensitive polymer micelles with hydrazone-ester dual linkers.

Fabrication of microwell arrays based on two-dimensional ordered polystyrene microspheres for high-throughput single-cell analysis.

This paper describes a method of fabricating rounded bottom microwell arrays (MA) in poly(dimethylsiloxane) (PDMS) by molding a monolayer of ordered polystyrene (PS) microspheres. PS microspheres were self-assembled on a glass slide and partially melted mainly from the bottom at 240 °C to increase adhesive force with the substrate. The partially melted PS arrays were used as master to generate MA. Microwell sizes are tunable in the 10-20 µm range with rounded bottoms; such a 3D structure is not readily obtainable through conventional soft lithography. Both adherent and nonadherent cell types can be retained in the microwells with high efficiency. As a demonstration of the advantage of real-time cell screening with this MA, single cell enzyme kinetic analysis was also carried out on trapped single cells. The PDMS MA may find applications in high-throughput drug screening, guided formation of cell clusters, and multicellular communication.

Hydrolysis of cyclic poly(ethylene terephthalate) trimers by a carboxylesterase from Thermobifida fusca KW3.

We have identified a carboxylesterase produced in liquid cultures of the thermophilic actinomycete Thermobifida fusca KW3 that were supplemented with poly(ethylene terephthalate) fibers. The enzyme hydrolyzed highly hydrophobic, synthetic cyclic poly(ethylene terephthalate) trimers with an optimal activity at 60 degrees C and a pH of 6. V (max) and K (m) values for the hydrolysis were 9.3 micromol(-1) min(-1) mg(-1) and 0.5 mM, respectively. The esterase showed high specificity towards short and middle chain-length fatty acyl esters of p-nitrophenol. The enzyme retained 37% of its activity after 96 h of incubation at 50 degrees C and a pH of 8. Enzyme inhibition studies and analysis of substitution mutants of the carboxylesterase revealed the typical catalytic mechanism of a serine hydrolase with a catalytic triad composed of serine, glutamic acid, and histidine.

Cytotoxicity and genotoxicity of DMABEE, a co-photoinitiator of resin polymerization, on CHO-K1 cells: Role of redox and carboxylesterase.

The 4-dimethylaminobenzoic acid ethyl ester (DMABEE) is an important co-initiator for resin polymerization in dental resinous materials. As a radical forming chemical with high lipophilicity, the genotoxicity and cytotoxicity of DMABEE deserve prudent investigation. In this study, we found that DMABEE reduced the viability and proliferation of Chinese hamster ovary (CHO-K1) cells in a dose-dependent manner, and altered cell morphology at higher concentrations. G0/G1 cell cycle arrest was induced by DMABEE at 0.25-0.75 mM, and cell proportion of sub-G0/G1 phase was significantly elevated at 1 mM while cell apoptosis was observed. Genotoxic effect was noted when cells were treated by 0.1 mM DMABEE, as revealed by increase of micronucleus formation. Reactive oxygen species overproduction was observed as cells treated with 0.75 and 1 mM, while elevation of intracellular glutathione was noticeable since 0.1 mM. Contrary to our expectation, pretreatment by N-acetyl-l-cysteine enhanced the toxicity of DMABEE on CHO-K1 cells. Catalase mildly reduced the toxic effect and carboxylesterase showed obvious ability to reverse the toxicity of DMABEE. These findings highlight the mechanism of DMABEE toxicity and provide clues for safety improvement of its application in clinical dental treatment.

Biomimetic Gemcitabine-Lipid Prodrug Nanoparticles for Pancreatic Cancer.

Gemcitabine (Gem) is a key drug for pancreatic cancer, yet limited by high systemic toxicity, low bioavailability and poor pharmacokinetic profiles. To overcome these limitations, Gem prodrug amphiphiles were synthesised with oleyl, linoleyl and phytanyl chains. Self-assembly and lyotropic mesophase behaviour of these amphiphiles were examined using polarised optical microscopy and Synchrotron SAXS (SSAXS). Gem-phytanyl was found to form liquid crystalline inverse cubic mesophase. This prodrug was combined with phospholipids and cholesterol to create biomimetic Gem-lipid prodrug nanoparticles (Gem-LPNP), verified by SSAXS and cryo-TEM to form liposomes. In vitro testing of the Gem-LPNP in several pancreatic cancer cell lines showed lower toxicity than Gem. However, in a cell line-derived pancreatic cancer mouse model Gem-LPNP displayed greater tumour growth inhibition than Gem using a fraction (<6 %) of the clinical dose and without any systemic toxicity. The easy production, improved efficacy and low toxicity of Gem-LPNP represents a promising new nanomedicine for pancreatic cancer.

Effect of food contamination and collection material in the measurement of biomarkers in saliva of horses.

This study aims to evaluate the effect of the presence of food and the material used in a panel of biomarkers in saliva of horses. For the food effect study, clean saliva was incubated with a known amount of food consisting of oats, hay or grass. Significant changes were observed when saliva was incubated with oats for total protein (P = .050) and phosphorus (P = .008), with grass for total protein (P = .037), salivary alpha-amylase (sAA, P = .018), total esterase (TEA, P = .018), butyrilcholinesterase (BChE, P = .037), adenosine deaminase (ADA, P = .037), and total bilirubin (P = .018), and with hay for sAA (P = .018), phosphorus (P = .037), γ-glutamyl transferase (gGT, P = .004), and creatine kinase (CK, P = .016). For the material-based collection study, saliva using a sponge and a cotton role at the same time were collected and compared. Lower values were obtained in clean saliva collected with cotton role compared to sponge for sAA (P = .030), TEA (P = .034), BChE (P = .003), gGT (P = .002) and cortisol (P < .001) In conclusion, the presence of food and the material used for its collection, can influence the results obtained when analytes are measured in saliva of horses.

Arbaclofen placarbil, a novel R-baclofen prodrug: improved absorption, distribution, metabolism, and elimination properties compared with R-baclofen.

Baclofen is a racemic GABA(B) receptor agonist that has a number of significant pharmacokinetic limitations, including a narrow window of absorption in the upper small intestine and rapid clearance from the blood. Arbaclofen placarbil is a novel transported prodrug of the pharmacologically active R-isomer of baclofen designed to be absorbed throughout the intestine by both passive and active mechanisms via the monocarboxylate type 1 transporter. Arbaclofen placarbil is rapidly converted to R-baclofen in human and animal tissues in vitro. This conversion seems to be primarily catalyzed in human tissues by human carboxylesterase-2, a major carboxylesterase expressed at high levels in various tissues including human intestinal cells. Arbaclofen placarbil was efficiently absorbed and rapidly converted to R-baclofen after oral dosing in rats, dogs, and monkeys. Exposure to R-baclofen was proportional to arbaclofen placarbil dose, whereas exposure to intact prodrug was low. Arbaclofen placarbil demonstrated enhanced colonic absorption, i.e., 5-fold higher R-baclofen exposure in rats and 12-fold higher in monkeys compared with intracolonic administration of R-baclofen. Sustained release formulations of arbaclofen placarbil demonstrated sustained R-baclofen exposure in dogs with bioavailability up to 68%. In clinical use, arbaclofen placarbil may improve the treatment of patients with gastroesophageal reflux disease, spasticity, and numerous other conditions by prolonging exposure and decreasing the fluctuations in plasma levels of R-baclofen.

Comparative study on digestive lipase activities on the self emulsifying excipient Labrasol, medium chain glycerides and PEG esters.

Labrasol is a lipid-based self-emulsifying excipient used in the preparation of lipophilic drugs intended for oral delivery. It is mainly composed of PEG esters and glycerides with medium acyl chains, which are potential substrates for digestive lipases. The hydrolysis of Labrasol by porcine pancreatic extracts, human pancreatic juice and several purified digestive lipases was investigated in the present study. Classical human pancreatic lipase (HPL) and porcine pancreatic lipase, which are the main lipases involved in the digestion of dietary triglycerides, showed very low levels of activity on the entire Labrasol excipient as well as on separated fractions of glycerides and PEG esters. On the other hand, gastric lipase, pancreatic lipase-related protein 2 (PLRP2) and carboxyl ester hydrolase (CEH) showed high specific activities on Labrasol. These lipases were found to hydrolyze the main components of Labrasol (PEG esters and monoglycerides) used as individual substrates, whereas these esters were found to be poor substrates for HPL. The lipolytic activity of pancreatic extracts and human pancreatic juice on Labrasol(R) is therefore mainly due to the combined action of CEH and PLRP2. These two pancreatic enzymes, together with gastric lipase, are probably the main enzymes involved in the in vivo lipolysis of Labrasol taken orally.

Synthesis of fluorogenic polymers for visualizing cellular internalization.

The binding of a polymeric ligand to a cell surface receptor can promote its internalization. Methods to track and visualize multivalent ligands within a cell can give rise to new therapeutic strategies and illuminate signaling processes. We have used the features of the ring-opening metathesis polymerization (ROMP) to develop a general strategy for synthesizing multivalent ligands equipped with a latent fluorophore. The utility of ligands of this type is highlighted by visualizing multivalent antigen internalization in live B cells.

A dual enzyme system composed of a polyester hydrolase and a carboxylesterase enhances the biocatalytic degradation of polyethylene terephthalate films.

TfCut2 from Thermobifida fusca KW3 and the metagenome-derived LC-cutinase are bacterial polyester hydrolases capable of efficiently degrading polyethylene terephthalate (PET) films. Since the enzymatic PET hydrolysis is inhibited by the degradation intermediate mono-(2-hydroxyethyl) terephthalate (MHET), a dual enzyme system consisting of a polyester hydrolase and the immobilized carboxylesterase TfCa from Thermobifida fusca KW3 was employed for the hydrolysis of PET films at 60°C. HPLC analysis of the reaction products obtained after 24 h of hydrolysis showed an increased amount of soluble products with a lower proportion of MHET in the presence of the immobilized TfCa. The results indicated a continuous hydrolysis of the inhibitory MHET by the immobilized TfCa and demonstrated its advantage as a second biocatalyst in combination with a polyester hydrolase for an efficient degradation oft PET films. The dual enzyme system with LC-cutinase produced a 2.4-fold higher amount of degradation products compared to TfCut2 after a reaction time of 24 h confirming the superior activity of his polyester hydrolase against PET films.

Effect of Cellular Location of Human Carboxylesterase 2 on CPT-11 Hydrolysis and Anticancer Activity.

CPT-11 is an anticancer prodrug that is clinically used for the treatment of metastatic colorectal cancer. Hydrolysis of CPT-11 by human carboxylesterase 2 (CE2) generates SN-38, a topoisomerase I inhibitor that is the active anti-tumor agent. Expression of CE2 in cancer cells is under investigation for the tumor-localized activation of CPT-11. CE2 is normally expressed in the endoplasmic reticulum of cells but can be engineered to direct expression of active enzyme on the plasma membrane or as a secreted form. Although previous studies have investigated different locations of CE2 expression in cancer cells, it remains unclear if CE2 cellular location affects CPT-11 anticancer activity. In the present study, we directly compared the influence of CE2 cellular location on substrate hydrolysis and CPT-11 cytotoxicity. We linked expression of CE2 and enhanced green fluorescence protein (eGFP) via a foot-and-mouth disease virus 2A (F2A) peptide to facilitate fluorescence-activated cell sorting to achieve similar expression levels of ER-located, secreted or membrane-anchored CE2. Soluble CE2 was detected in the medium of cells that expressed secreted and membrane-anchored CE2, but not in cells that expressed ER-retained CE2. Cancer cells that expressed all three forms of CE2 were more sensitive to CPT-11 as compared to unmodified cancer cells, but the membrane-anchored and ER-retained forms of CE2 were consistently more effective than secreted CE2. We conclude that expression of CE2 in the ER or on the membrane of cancer cells is suitable for enhancing CPT-11 anticancer activity.

In vitro evaluation of the inhibitory potential of pharmaceutical excipients on human carboxylesterase 1A and 2.

Two major forms of human carboxylesterase (CES), CES1A and CES2, dominate the pharmacokinetics of most prodrugs such as imidapril and irinotecan (CPT-11). Excipients, largely used as insert vehicles in formulation, have been recently reported to affect drug enzyme activity. The influence of excipients on the activity of CES remains undefined. In this study, the inhibitory effects of 25 excipients on the activities of CES1A1 and CES2 were evaluated. Imidapril and CPT-11 were used as substrates and cultured with liver microsomes in vitro. Imidapril hydrolase activities of recombinant CES1A1 and human liver microsomes (HLM) were strongly inhibited by sodium lauryl sulphate (SLS) and polyoxyl 40 hydrogenated castor oil (RH40) [Inhibition constant (Ki) = 0.04 ± 0.01 µg/ml and 0.20 ± 0.09 µg/ml for CES1A1, and 0.12 ± 0.03 µg/ml and 0.76 ± 0.33 µg/ml, respectively, for HLM]. The enzyme hydrolase activity of recombinant CES2 was substantially inhibited by Tween 20 and polyoxyl 35 castor oil (EL35) (K(i) = 0.93 ± 0.36 µg/ml and 4.4 ± 1.24 µg/ml, respectively). Thus, these results demonstrate that surfactants such as SLS, RH40, Tween 20 and EL35 may attenuate the CES activity; such inhibition should be taken into consideration during drug administration.

Urethane dimethacrylate induces cytotoxicity and regulates cyclooxygenase-2, hemeoxygenase and carboxylesterase expression in human dental pulp cells.

The toxic effect of urethane dimethacrylate (UDMA), a major dental resin monomer, on human dental pulp is not fully clear. In this study, we investigated the influence of UDMA on the cytotoxicity, cell cycle distribution, apoptosis and related gene expression of dental pulp cells. The role of reactive oxygen species, hemeoxygenase-1 (HO-1) and carboxylesterase (CES) in UDMA cytotoxicity, was evaluated. UDMA induced morphological changes of pulp cells and decreased cell viability by 29-49% at concentrations of 0.1-0.35 mM. UDMA induced G0/G1, G2/M cell cycle arrest and apoptosis. The expression of cdc2, cyclinB1 and cdc25C was inhibited by UDMA. Moreover, UDMA stimulated COX-2, HO-1 and CES2 mRNA expression of pulp cells. The cytotoxicity of UDMA was attenuated by N-acetyl-l-cysteine, catalase and esterase, but was enhanced by Zn-protoporphyrin (HO-1 inhibitor), BNPP (CES inhibitor) and loperamide (CES2 inhibitor). Exposure of UDMA may potentially induce the inflammation and toxicity of dental pulp. These findings are important for understanding the clinical response of human pulp to resin monomers after operative restoration and pulp capping, and also provide clues for improvement of dental materials.

High level expression of a hydrophobic poly(ethylene terephthalate)-hydrolyzing carboxylesterase from Thermobifida fusca KW3 in Escherichia coli BL21(DE3).

The gram-positive thermophilic actinomycete Thermobifida fusca KW3 secretes a highly hydrophobic carboxylesterase (TfCa) that is able to hydrolyze poly(ethylene terephthalate). TfCa was produced in the Escherichia coli strain BL21(DE3) as a fusion protein consisting of a pelB leader sequence to ensure periplasmic localization of the protein and a His(6) tag for use in its purification. To enhance the recombinant enzyme yield, the tfca gene from T. fusca KW3 was successfully optimized for codon usage in E. coli. In addition, the gene expression induction conditions were optimized and the temperature for cell cultivation was lowered to reduce inclusion body formation. The optimized codons and expression conditions yielded 4500-fold higher TfCa activity than the wild-type strain. Using a pH-controlled bioreactor for cultivation, a TfCa protein concentration of 41.6mg/L was achieved.