CsPbBr3 Perovskite Quantum Dots Encapsulated by a Polymer Matrix for Ultrasensitive Dynamic Imaging of Intracellular MicroRNA.

Herein, CsPbBr3 perovskite quantum dots (CPB PQDs)@poly(methyl methacrylate) (PMMA) (CPB@PMMA) nanospheres were used as energy donors with high Förster resonance energy transfer (FRET) efficiency and exceptional biocompatibility for ultrasensitive dynamic imaging of tiny amounts of microRNAs in living cells. Impressively, compared with traditional homogeneous single QDs as energy donors, CPB@PMMA obtained by encapsulating numerous CPB PQDs into PMMA as energy donors could not only significantly increase the efficiency of FRET via improving the local concentration of CPB PQDs but also distinctly avoid the problem of cytotoxicity caused by divulged heavy metal ions entering living cells. Most importantly, in the presence of target miRNA-21, DNA dendrimer-like nanostructures labeled with 6-carboxy-tetramethylrhodamine (TAMRA) were generated by the exposed tether interhybridization of the Y-shape structure, which could wrap around the surface of CPB@PMMA nanospheres to remarkably bridge the distance of FRET and increase the opportunity for effective energy transfer, resulting in excellent precision and accuracy for ultrasensitive and dynamic imaging of miRNAs. As proof of concept, the proposed strategy exhibited ultrahigh sensitivity with a detection limit of 45.3 aM and distinctly distinguished drug-irritative miRNA concentration abnormalities with living cells. Hence, the proposed enzyme-free CPB@PMMA biosensor provides convincing evidence for supplying accurate information, which could be expected to be a powerful tool for bioanalysis, diagnosis, and prognosis of human diseases.

Platelet-rich fibrin as an apical barrier for MTA placement in the treatment of teeth with open apices: a pilot study.

OBJECTIVE: The aim of the present pilot study was to assess the effectiveness of the platelet-rich fibrin (PRF) apical barrier for the placement of MTA for the treatment of teeth with periapical lesions and open apices. METHODS: A total of thirty teeth on twenty-eight patients with open apices and periapical periodontitis were enrolled and divided into two groups in the present pilot study. In the PRF group (fourteen teeth in thirteen patients), nonsurgical endodontic treatment was performed using PRF as an apical matrix, after which the apical plug of the MTA was created. For the non-PRF group (fourteen teeth in fourteen patients), nonsurgical endodontic therapy was performed using only the MTA for an apical plug with no further periapical intervention. Clinical findings and periapical digital radiographs were used for evaluating the healing progress after periodic follow-ups of 1, 3, 6, and 9 months. The horizontal dimension of the periapical lesion was gauged, and the changes in the dimensions were recorded each time. The Friedman test, Dunn-Bonferroni post hoc correction, and Mann-Whitney U test were used for statistical analysis, with P < 0.05 serving as the threshold for determining statistical significance. RESULTS: All patients in both groups in the present pilot study had no clinical symptoms after 1 month, with a significant reduction in the periapical lesion after periodic appointments. The lesion width of the PRF group was significantly smaller than that of the non-PRF group in the sixth and ninth month after treatment. CONCLUSIONS: PRF is a promising apical barrier matrix when combined with MTA for the treatment of teeth with open apices and periapical periodontitis. Small number of study subjects and the short time of follow-up period limit the generalizability of these results. TRIAL REGISTRATION: TCTR, TCTR20221109006. Registered 09 November 2022 - Retrospectively registered, https://www.thaiclinicaltrials.org/show/TCTR20221109006 .

Encapsulation of Pure Water-Stable Perovskite Nanocrystals (PNCs) into Biological Environment-Stable PNCs for Cell Imaging.

Recently emerging perovskite nanocrystals (PNCs) are very attractive fluorescence nanomaterials due to their very narrow emission peak, tunable wavelength, and extremely high quantum yield, but their chemosensing, biosensing and bioimaging applications suffer from the poor stability of ordinary PNCs in aqueous media, especially in biological matrices. Recently developed water-stable 2D CsPb2Br5-encapsulated 3D CsPbBr3 PNCs (i.e., CsPbBr3/CsPb2Br5 PNCs) show extremely stable light emission in pure water, but their fluorescence is seriously quenched in aqueous media containing biological molecules due to their chemical reactions. In this work, we used a facile method to encapsulate pure water-stable CsPbBr3/CsPb2Br5 PNCs in water with SiO2 and polyethylene glycol hexadecyl ether (Brij58) into a new kind of biological environment-stable PNCs (CsPbBr3/CsPb2Br5@SiO2-Brij58). The synthesis of the target PNCs can be accomplished in a fast, easy, and green way. The obtained CsPbBr3/CsPb2Br5@SiO2-Brij58 PNCs maintain strong fluorescence emission for a long time, all in pH 7.4 PBS, BSA, and minimum essential medium, exhibiting excellent biological environment stability. Moreover, the developed biological environment-stable PNCs show good biocompatibility and have been successfully used in cell imaging. Overall, the work provides an easy, low-cost, and efficient application of PNCs in bioimaging.

Hole Mobility Enhancement in Benzo[1,2-b:4,5-b']Dithiophene-Based Conjugated Polymer Transistors through Directional Alignment, Perovskite Functionalization and Solid-State Electrolyte Gating.

Tunability in electronic and optical properties has been intensively explored for developing conjugated polymers and their applications in organic and perovskite-based electronics. Particularly, the charge carrier mobility of conjugated polymer semiconductors has been deemed to be a vital figure-of-merit for achieving high-performance organic field-effect transistors (OFETs). In this study, the systematic hole carrier mobility improvement of benzo[1,2-b:4,5-b']dithiophene-based conjugated polymer in perovskite-functionalized organic transistors is demonstrated. In conventional OFETs with a poly(methyl methacrylate) (PMMA) gate dielectric, improvements in hole mobility of 0.019 cm2 V-1 s-1 are measured using an off-center spin-coating technique, which exceeds those of on-center counterparts (0.22 ± 0.07 × 10-2 cm2 V-1 s-1). Furthermore, the mobility drastically increases by adopting solid-state electrolyte gating, corresponding to 2.99 ± 1.03 cm2 V-1 s-1 for the control, and the best hole mobility is 8.03 cm2 V-1 s-1 (average ≈ 6.94 ± 0.59 cm2 V-1 s-1) for perovskite-functionalized OFETs with a high current on/off ratio of >106. The achieved device performance would be attributed to the enhanced film crystallinity and charge carrier density in the hybrid perovskite-functionalized organic transistor channel, resulting from the high-capacitance electrolyte dielectric.

Sulfonate-Containing Polyelectrolytes for Perovskite Modification: Chemical Configuration, Property, and Performance.

Three sulfonate-containing polyelectrolytes are elaborately designed and used to passivate perovskite film with the anti-solvent method. Under the influence of the secondary monomer, three copolymers present various chemical configurations and deliver different modification effects. Fluorene-thiophene copolymer STF has linear and highly-conjugated chain. STF-perovskite film presents large crystal grains. Fluorene-carbazole copolymer SCF has flexible chain and easily enters into grain boundary areas. SCF-perovskite film is homogenous and continuous. Fluorene-fluorene copolymer SPF agglomerates on the surface and is not applicable to the anti-solvent method. The full investigation demonstrates that STF and SCF not only conduct surface defect passivation, but also improve the film quality by being involved in the perovskite's crystallization process. Compared with the control device, the devices with STF and SCF deliver high efficiency and excellent stability. The unencapsulated devices with STF and SCT maintain ≈80% of the initial power conversion efficiency (PCE) after 40 days of storage under 30-40% relative humidity. SCF performs better and the device maintains 60% of the initial PCE after 20 days of storage under 60-80% relative humidity.

Enhancing clayey soil performance with lime and waste rubber tyre powder: Mechanical, microstructural, and statistical analysis.

Nowadays, for soil stabilisation and cleaner production of geo-composites, the possibility of utilizing waste rubber is in vogue. The present paper deals with experimentally investigating the mechanical and micro-structural characteristics of weak Indian clayey soil partially substituted with lime (0-3.5%) and waste rubber tyre powder (0-15%). It was observed that, with increasing lime and rubber powder content, the plasticity index of the soil decreases. The shear strength and compaction testing results reveal that adding lime and rubber tyre powder (RTP) enhances the geotechnical performance of clayey soil up to an optimum dosage value. Also, the tri-axial shear testing was performed to obtain stress-strain curves for all considered soil mixes. For modified clayey soil containing 3% lime and 12.5% rubber powder, the cohesion values and bearing capacities improved phenomenally by 36.1% and 88.6% respectively, when compared to clayey soil. Further for this mix, SEM analysis reveals a compacted microstructure which improves dry-density and California's bearing ratio among all modified mixes. The novel co-relations upon regression analysis are found able to predict plasticity index, dry density, bearing capacity and shear strength with higher confidence levels. Overall, the cost-benefit analysis worked out to obtain the optimum cost of construction of footings and flexible pavement shows cost deductions up to 19% and 39% respectively while utilizing modified clay soil mixes containing 3% lime and 12.5% rubber powder in subgrade, ultimately making production stronger, cheaper and environment friendly.

A xonotlite nanofiber bioactive 3D-printed hydrogel scaffold based on osteo-/angiogenesis and osteoimmune microenvironment remodeling accelerates vascularized bone regeneration.

BACKGROUND: Coordination between osteo-/angiogenesis and the osteoimmune microenvironment is essential for effective bone repair with biomaterials. As a highly personalized and precise biomaterial suitable for repairing complex bone defects in clinical practice, it is essential to endow 3D-printed scaffold the above key capabilities. RESULTS: Herein, by introducing xonotlite nanofiber (Ca6(Si6O17) (OH)2, CS) into the 3D-printed silk fibroin/gelatin basal scaffold, a novel bone repair system named SGC was fabricated. It was noted that the incorporation of CS could greatly enhance the chemical and mechanical properties of the scaffold to match the needs of bone regeneration. Besides, benefiting from the addition of CS, SGC scaffolds could accelerate osteo-/angiogenic differentiation of bone mesenchymal stem cells (BMSCs) and meanwhile reprogram macrophages to establish a favorable osteoimmune microenvironment. In vivo experiments further demonstrated that SGC scaffolds could efficiently stimulate bone repair and create a regeneration-friendly osteoimmune microenvironment. Mechanistically, we discovered that SGC scaffolds may achieve immune reprogramming in macrophages through a decrease in the expression of Smad6 and Smad7, both of which participate in the transforming growth factor-ß (TGF-ß) signaling pathway. CONCLUSION: Overall, this study demonstrated the clinical potential of the SGC scaffold due to its favorable pro-osteo-/angiogenic and osteoimmunomodulatory properties. In addition, it is a promising strategy to develop novel bone repair biomaterials by taking osteoinduction and osteoimmune microenvironment remodeling functions into account.

Towards a replacement therapy for stimulant betel quid dependence: A proof of concept study.

Stimulant betel quid (SBQ) containing Piper betle leaf (L), green unripe Areca catechu nut (AN) and the alkalizing agent, slaked lime, is an addictive, carcinogenic stimulant, with no pharmacotherapy, chewed by millions of people in the Asia/Pacific region. We compared the in vivo physiological profile of chewing (1) non-stimulant P. betle leaf+AN (LAN), (2) SBQ utilizing slaked lime and (3) a novel SBQ utilizing Mg(OH)2 , as an alkalizing agent, by measuring physiological parameters of intoxication and these were correlated with in vitro levels of alkaloids measured by UHPLC-MS/MS. Chewing LAN, which contains high levels of arecoline, had no stimulatory physiological effect. Chewing SBQ containing slaked lime or novel SBQ containing Mg(OH)2 , induced equivalent stimulatory physiological responses. In vitro, slaked lime hydrolyzed muscarinic esters in LAN while Mg(OH)2 did not. The physiological stimulation induced by chewing both SBQ and the lack of physiology to chewing LAN can be explained by changes in lipid solubility of phytochemicals induced by mouth pH during chewing of basic SBQ or acidic LAN. Since antiquity people have added slaked lime to SBQ to enhance absorption of phyto-chemicals across oral membranes to stimulate physiology. The same physiological changes can be induced by substituting slaked lime for less physically and chemically destructive bases. If attitudes regarding SBQ dependence can advance towards the more progressive attitudes already used to help smokers quit tobacco, modern chemistry has the potential to make chewing SBQ safer and quitting programs may become more accessible and efficacious.

Biocompatibility and bioactive potential of NeoPUTTY calcium silicate-based cement: An in vivo study in rats.

AIM: To evaluate the inflammatory reaction and the ability to induce mineralization activity of a new repair material, NeoPUTTY (NPutty; NuSmile, USA), in comparison with Bio-C Repair (BC; Angelus, Brazil) and MTA Repair HP (MTA HP; Angelus, Brazil). METHODOLOGY: Polyethylene tubes were filled with materials or kept empty (control group, CG) and implanted in subcutaneous tissue of rats for 7, 15, 30, and 60 days (n = 6/group). Capsule thickness, number of inflammatory cells (ICs), fibroblasts, collagen content, and von Kossa analysis were performed. Unstained sections were evaluated under polarized light and by immunohistochemistry for osteocalcin (OCN). Data were submitted to two-way anova followed by Tukey's test (p ≤ .05), except for OCN. OCN data were submitted to Kruskal-Wallis and Dunn and Friedman post hoc tests followed by the Nemenyi test at a significance level of 5%. RESULTS: At 7, 15, and 30 days, thick capsules containing numerous ICs were seen around the materials. At 60 days, a moderate inflammatory reaction was observed for NPutty, BC while MTA HP presented thin capsules with moderate inflammatory cells. In all periods, NPutty specimens contained the highest values of ICs (p < .05). From 7 to 60 days, the number of ICs reduced significantly while an increase in the number of fibroblasts and birefringent collagen content was observed. At 7 and 15 days, no significant difference was observed in the immunoexpression of OCN (p > .05). At 30 and 60 days, NPutty showed the lowest values of OCN (p < .05). At 60 days, a similar immunoexpression was observed for BC and MTA HP (p > .05). In all time intervals, capsules around NPutty, BC, and MTA HP showed von Kossa-positive and birefringent structures. CONCLUSIONS: Despite the greater inflammatory reaction promoted by NeoPutty than BC and MTA HP, the reduction in the thickness of capsules, the increase in the number of fibroblasts, and the reduction in the number of ICs indicate that this bioceramic material is biocompatible Furthermore, NeoPutty presents the ability to induce mineralization activity.

Highly luminescent and stable CsPbBr3 perovskite nanocrystals coated with polyethersulfone for white light-emitting diode applications.

Simultaneously improving the stability and photoluminescence quantum yield (PLQY) of all inorganic perovskite nanocrystals (NCs) is crucial for their practical utilization in various optoelectronic devices. Here, CsPbBr3 NCs coated with polyethersulfone (PES) were prepared via an in-situ co-precipitation method. The sulfone groups in PES bind to undercoordinated lead ion (Pb2+) on the CsPbBr3 NCs, resulting in significant reduction of surface defects, thus enhancing the PLQY from 74.2% to 88.3%. Meanwhile, the PES-coated NCs exhibit high water resistance and excellent heat and light stability, maintaining over 85% of the initial PL intensity under thermal aging (70°C, 4 h) and continuous 365 nm ultraviolet (UV) light irradiation (24 W, 8 h) conditions. By contrast, the PL intensity of the control NCs dramatically dropped to less than 40%. Finally, a diode emitting bright white light was fabricated utilizing the PES-coated CsPbBr3 NCs, which exhibits a color gamut of ~110% NTSC standard.

Effect of polymethyl methacrylate on in situ patterning of perovskite quantum dots by inkjet printing.

The preparation of perovskite quantum dots (PQDs) using an in situ inkjet printing method is beneficial for improving the problems of aggregation and photoluminescence (PL) quenching during long-term storage. However, the stability of PQDs prepared using this method is still not ideal, and the morphology of in situ-printed patterns needs to be optimized. To address these problems, this study introduced polymethyl methacrylate (PMMA) into the process of in situ inkjet printing of PQDs and explored the effect of PMMA on the in situ patterning effect of PQDs. The results showed that using a mixed precursor solution containing a small amount of PMMA as the printing ink can slow down the shrinkage process of ink droplets and improve the uniformity of film formation. As the printing substrate, PMMA provided a suitable high-viscosity environment for the in situ growth of PQDs. This could effectively suppress the coffee ring effect. In addition, the interaction between the C=O=C group in PMMA and metal ion Pb2+ in the CsPbBr3 precursor molecules was favourable to enhancing the density of PQDs. The prepared PMMA-coated CsPbBr3 quantum dots (QDs) pattern had high stability and could maintain at 90.08% PL intensity after 1 week of exposure to air.

The outcome of combined use of iRoot BP Plus and iRoot SP for root-end filling in endodontic microsurgery: a randomized controlled trial.

OBJECTIVES: Root-end filling is important for the clinical outcome of endodontic microsurgery. Our previous study showed that combined application of iRoot BP Plus Root Repair Material (BP-RRM) and iRoot SP Injectable Root Canal Sealer (SP-RCS) in root-end filling exhibited better apical sealing as compared to the application of BP-RRM alone. The aim of this randomized controlled clinical trial was to evaluate the effect of the combined use of BP-RRM and SP-RCS on the prognosis of teeth with refractory periapical diseases after endodontic microsurgery. MATERIALS AND METHODS: 240 teeth with refractory periapical diseases scheduled for endodontic microsurgery were randomly divided into BP-RRM/SP-RCS group (n = 120) and BP-RRM group (n = 120). The patients were followed up at 3 months, 6 months, and 12 months after endodontic microsurgery. Pre- and post-operative clinical and radiographic examinations were performed to evaluate the treatment outcome. The 1-year success rate of endodontic microsurgery in BP-RRM/SP-RCS and BP-RRM groups was compared by Chi-square test. Factors that might impact the prognosis were further analyzed using Chi-square test or Fisher's exact test. RESULTS: A total of 221 teeth completed the 12-month follow-up. The 1-year success rates of the BP-RRM/SP-RCS and BP-RRM groups were 94.5% (104/110) and 92.8% (103/111), respectively. The combined use of BP-RRM and SP-RCS achieved a clinical outcome comparable to BP-RRM alone (P = 0.784). Tooth type (P = 0.002), through-and-through/apico-marginal lesion (P = 0.049), periodontal status (P < 0.0001), and Kim's lesion classification (P < 0.0001) were critical factors associated with the 1-year success of endodontic microsurgery. CONCLUSIONS: The combined use of BP-RRM and SP-RCS is a practicable method for root-end filling in endodontic microsurgery with a satisfactory 1-year clinical outcome. CLINICAL RELEVANCE: The combined application of BP-RRM and SP-RCS in EMS is an effective root-end filling method with a satisfactory 1-year clinical outcome. TRIAL REGISTRATION: This study was registered in the Chinese Clinical Trial Registry (ChiCTR2100052174).

Comparative bioactivity and immunomodulatory potential of the new Bioroot Flow and AH Plus Bioceramic sealer: An in vitro study on hPDLSCs.

OBJECTIVES: To evaluate the cytocompatibility, bioactivity, and anti-inflammatory potential of the new pre-mixed calcium silicate cement-based sealers Bioroot Flow (BrF) and AH Plus Bioceramic Sealer (AHPbcs) on human periodontal ligament stem cells (hPDLSCs) compared to the epoxy resin-based sealer AH Plus (AHP). MATERIALS AND METHODS: Standardized discs and 1:1, 1:2, and 1:4 eluates of BrF, AHPbcs and AHP after setting were prepared. The following assays were performed: cell attachment and morphology via SEM, cell viability via a MTT assay, cell migration/proliferation via a wound-healing assay, cytoskeleton organization via immunofluorescence staining; cytokine release via ELISA; osteo/cemento/odontogenic marker expression via RT-qPCR, and cell mineralized nodule formation via Alizarin Red S staining. HPDLSCs were isolated from extracted third molars from healthy patients. Comparisons were made with hPDLSCs cultured in unconditioned (negative control) or osteogenic (positive control) culture media. Statistical significance was established at p < 0.05. RESULTS: Both BrF and AHPbcs showed significantly positive results in the cytocompatibility assays (cell metabolic activity, migration, attachment, morphology, and cytoskeleton organization) compared with a negative control group, while AHP showed significant negative results. BrF exhibited an upregulation of at least one osteo/cementogenic marker compared to the negative and positive control groups. BrF showed a significantly higher calcified nodule formation than AHPbcs, the negative and positive control groups, while AHPbcs was higher than the negative control group. Both were also significantly higher than AHP group. CONCLUSION: BrF and AHPbcs exhibit adequate and comparable cytocompatibility on hPDLSCs. BrF also promoted the osteo/cementogenic differentiation of hPDLSCs. Both calcium silicate-based sealers favored the downregulation of the inflammatory cytokine IL-6 and the calcified nodule formation from hPDLSCs. BrF exerted a significantly higher influence on cell mineralization than AHPbcs. CLINICAL RELEVANCE: This is the first study to elucidate the biological properties and immunomodulatory potential of Bioroot Flow and AH Plus Bioceramic Sealer. The results act as supporting evidence for their use in root canal treatment.

In silico toxicity and immunological interactions of components of calcium silicate-based and epoxy resin-based endodontic sealers.

OBJECTIVES: The present study aimed to determine in silico toxicity predictions of test compounds from hydraulic calcium silicate-based sealers (HCSBS) and AH Plus and computationally simulate the interaction between these substances and mediators of periapical inflammation via molecular docking. MATERIALS AND METHODS: All chemical information of the test compounds was obtained from the PubChem site. Predictions for bioavailability and toxicity analyses were determined by the Molinspiration Cheminformatics, pkCSM, ProTox-II and OSIRIS Property Explorer platforms. Molecular docking was performed using the Autodock4 AMDock v.1.5.2 program to analyse interactions between proteins (IL-1ß, IL-6, IL-8, IL-10 and TNF-α) and ligands (calcium silicate hydrate, zirconium oxide, bisphenol-A epoxy resin, dibenzylamine, iron oxide and calcium tungstate) to establish the affinity and bonding mode between systems. RESULTS: Bisphenol-A epoxy resin had the lowest maximum dose tolerated in humans and was the test compound with the largest number of toxicological properties (hepatotoxicity, carcinogenicity and irritant). All systems had favourable molecular docking. However, the ligands bisphenol-A epoxy resin and dibenzylamine had the greatest affinity with the cytokines tested. CONCLUSION: In silico predictions and molecular docking pointed the higher toxicity and greater interaction with mediators of periapical inflammation of the main test compounds from AH Plus compared to those from HCSBS. CLINICAL RELEVANCE: This is the first in silico study involving endodontic materials and may serve as the basis for further research that can generate more data, producing knowledge on the interference of each chemical compound in the composition of different root canal sealers.

Treatment outcomes and prognostic factors of the apical barrier technique with premixed calcium silicate-based putty in necrotic permanent teeth with open apices: a retrospective cohort study with up to six years follow-up.

OBJECTIVES: To evaluate treatment outcomes of the apical barrier technique with premixed calcium silicate-based putty for treating necrotic permanent teeth with open apices and to identify prognostic factors. MATERIALS AND METHODS: Permanent teeth with necrotic pulps and open apices treated by the apical barrier technique with premixed calcium silicate-based putty, with a minimum follow-up of 12 months, were included. Treatment outcomes were based on clinical signs, symptoms, and radiographic evaluation. The treatment outcome was dichotomized into success or failure according to strict and loose criteria. The chi-square test (or Fisher's exact test) and multiple logistic regression analysis were used to evaluate possible prognostic factors associated with treatment outcomes. RESULTS: Seventy-four teeth with a follow-up time of 12-72 months (mean, 25.74 ± 14.36 months) were included in the final evaluation. The success rate was 97.30% using the loose criteria and 66.22% using the strict criteria. Multiple logistic regression analysis indicated that the size of pre-operative periapical lesion (≥ 5 mm) (odds ratio [OR]: 18.96; P = 0.0153) and root canal underfilling (OR: 8.341; P = 0.0448) were significant predictors for treatment failure under the strict criteria. CONCLUSION: The apical barrier technique with premixed calcium silicate-based putty is a highly successful procedure for treating necrotic permanent teeth with open apices after an observation period of up to 6 years. Treatment success under the strict criteria is primarily affected by the size of the pre-operative periapical lesion and the apical extent of root-filling. CLINICAL RELEVANCE: Careful case selection and ensuring adequate root filling quality are essential to the successful outcome of the apical barrier technique with premixed calcium silicate-based putty.

Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study.

OBJECTIVES: Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment. MATERIALS AND METHODS: Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%. RESULTS: DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05). CONCLUSION: Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength. CLINICAL RELEVANCE: Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

Elective full pulpotomy in mature permanent teeth diagnosed with symptomatic irreversible pulpitis: a two years retrospective study.

AIM: To investigate the outcome of elective full pulpotomy, using calcium silicate-based cements (CSBC), after 2 years, in symptomatic mature permanent teeth with carious lesions, diagnosed as irreversible pulpitis, and analyse the capacity of Wolters et al. (2017) classification to predict the likelihood of treatment failure. METHODS: The treatment records of 56 patients with symptomatic mature teeth with carious lesions, diagnosed as irreversible pulpitis and treated by elective full pulpotomy, using CSBCs as pulp capping materials, were reviewed. Thirteen teeth were excluded. The remaining 43 teeth were evaluated retrospectively at 24 months. Fisher`s exact test with the Lancaster's mid-P adjustment was used to assess different outcomes amongst the diagnostic categories. RESULTS: Four of the cases failed before 24 months and required root canal treatment (RCT). Overall success rate at 2 years was 90.7% (39 of 43). An inverse, but non-significant, correlation was observed between the severity of pulpitis according to the Wolters classification and the treatment success rate (p > 0.05). The type of CSBC used was associated to the success rate (OR = 10.5; 95% C.I. = 0.5 - 207.4; p = 0.027), being 82% with Endosequence and 100% with Biodentine. Postoperative pain associated significantly to lower success rate (66.7%) (Odds ratio = 8.0; 95% C.I. = 0.7 - 95.9; p = 0.047). CONCLUSIONS: Elective full pulpotomy using a CSBC was a successful choice for the treatment of mature permanent teeth with symptoms indicative of irreversible pulpitis. There were no significant differences between the success rate of mild, moderate and severe pulpitis. Postoperative pain could be considered a risk marker for failure of full pulpotomy. The term "irreversible pulpitis" should be re-signified to indicate the need for access to the pulp chamber, rather than an indication for extraction or RCT.

In vitro and in vivo evaluation of iRoot BP Plus as a coronal sealing material for regenerative endodontic procedures.

OBJECTIVES: To investigate in vitro effects of a nanoparticle bioceramic material, iRoot BP Plus, on stem cells from apical papilla (SCAP) and in vivo capacity to induce pulp-dentin complex formation. MATERIALS AND METHODS: The sealing ability of iRoot BP Plus was measured via scanning electron microscopy (SEM). SCAP were isolated and treated in vitro by iRoot BP Plus conditioned medium, with mineral trioxide aggregate (MTA) conditioned medium and regular medium used as controls, respectively. Cell proliferation was assessed by BrdU labeling and MTT assay and cell migration was evaluated with wound healing and transwell assays. Osteo/odontogenic potential was evaluated by Alizarin red S staining and qPCR. Pulp-dentin complex formation in vivo was assessed by a tooth slice subcutaneous implantation model. RESULTS: iRoot BP Plus was more tightly bonded with the dentin. There was no difference in SCAP proliferation between iRoot BP Plus and control groups (P > 0.05). iRoot BP Plus had a greater capacity to elevated cell migration (P < 0.05) and osteo/odontogenic marker expression and mineralization nodule formation of SCAP compared with MTA groups (P < 0.05). Furthermore, the new continuous dentine layer and pulp-like tissue was observed in the iRoot BP Plus group in vivo. CONCLUSIONS: iRoot BP Plus showed excellent sealing ability, promoted the migration and osteo/odontogenesis of SCAP and induced pulp-dentin complex formation without affecting the cell proliferation, which indicated iRoot BP Plus was a promising coronal sealing material in REPs. CLINICAL RELEVANCE: The coronal sealing materials play crucial roles for the outcomes of REPs. This study showed that iRoot BP Plus has good coronal sealing and promote pulp-dentin complex formation compared with MTA, providing experimental evidences for the clinical application of iRoot BP Plus as a promising coronal seal material in REPs.

A three-dimensional cell culture approach to investigate cytotoxic effects and production of inflammatory mediators by epoxy resin-based and calcium silicate-based endodontic sealer.

OBJECTIVES: The aim of the present study was to assess the cytocompatibility of epoxy resin-based AH Plus Jet (Dentsply De Trey, Konstanz, Germany), Sealer Plus (MK Life, Porto Alegre, Brazil), calcium silicate-based Bio-C Sealer (Angelus, Londrina, PR, Brazil), Sealer Plus BC (MK Life) and AH Plus BC (Dentsply) through a tridimensional (3D) culture model of human osteoblast-like cells. METHODS: Spheroids of MG-63 cells were produced and exposed to fresh root canal sealers extracts by 24 h, and the cytotoxicity was assessed by the Lactate Dehydrogenase assay (LDH). The distribution of dead cells within the microtissue was assessed by fluorescence microscopy, and morphological effects were investigated by histological analysis. The secreted inflammatory mediators were detected in cell supernatants through flow luminometry (XMap Luminex). RESULTS: Cells incubated with AH Plus Jet, AH Plus BC, Sealer Plus BC and Bio-C Sealer extracts showed high rates of cell viability, while the Sealer Plus induced a significant reduction of cell viability, causing reduction on the spheroid structure. Sealer Plus and Seaker Plus BC caused alterations on 3D microtissue morphology. The AH Plus BC extract was associated with the downregulation of secretion of pro-inflammatory cytokines IL-5, IL-7, IP-10 and RANTES. CONCLUSIONS: The new AH Plus BC calcium silicate-based endodontic sealer did not reduce cell viability in vitro, while led to the downregulation of pro-inflammatory cytokines. CLINICAL SIGNIFICANCE: Choosing the appropriate endodontic sealer is a crucial step. AH Plus BC demonstrated high cell viability and downregulation of pro-inflammatory cytokines, appearing reliable for clinical use, while Sealer Plus presented lower cytocompatibility.

Novel cryotherapy technique for pulpotomy in mature permanent teeth with symptomatic irreversible pulpitis- a randomized controlled trial.

OBJECTIVES: To assess the effect of cryotherapy on haemostasis, post-operative pain, and the outcome of full pulpotomy performed in mature permanent teeth with symptomatic irreversible pulpitis. MATERIALS AND METHODS: The study included sixty mature permanent mandibular molar teeth with symptomatic irreversible pulpitis and no periapical rarefaction. After coronal pulp tissue amputation, teeth were randomly allocated to one of two groups (n = 30 each). In group I (conventional pulpotomy), a sterile cotton pellet moistened with 2.5% NaOCl was used for haemostasis. In group II (cryotherapy), the pulp chamber was continuously lavaged with 2.50C normal saline solution for haemostasis using an indigenous portable cryotherapy irrigation unit. Following haemostasis, the pulp was capped with mineral trioxide aggregate and the tooth was restored with resin composite. The time taken to achieve haemostasis was recorded. Preoperative and 24, 48 and 72 h postoperative pain was measured using the Numerical Rating Scale. The pulpotomy outcome was assessed at the 12-month follow-up. Data were analyzed using Fischer's exact test, two-sample t-test, two-sample Wilcoxon rank-sum test, Friedman Test, and Wilcoxon Signed Rank Test. RESULTS: The cryotherapy group achieved haemostasis in less time (p < 0.05). There was a significant pain reduction at 24 and 48 h in the cryotherapy group when compared with the conventional pulpotomy group (P < 0.005). The overall success rate of pulpotomy after 12 months was 88% (n = 22) in both study groups(p < 0.05). CONCLUSIONS: Cryotherapy application reduces postoperative pain and has no adverse effect on the outcome of pulpotomy in permanent teeth with symptomatic irreversible pulpitis. CLINICAL RELEVANCE: The cryotherapy can be incorporated in pulpotomy protocol as an adjunct to minimize post-operative pain.