Comparative Evaluation of Condylar Volume Between Patients With Unilateral Condylar Hyperplasia and Class III Dentofacial Deformity.

PURPOSE: To compare the condylar volume of patients with unilateral condylar hyperplasia (UCH) with that of patients with a Class III skeletal relation. MATERIALS AND METHODS: Twenty cone-beam computed tomograms of patients were analyzed. Images were divided into 2 groups: 10 from patients with transverse asymmetry of the face and 10 from patients with a Class III facial deformity. Patients' ages ranged from 15 to 30 years. Volumetric data were reconstructed using Dolphin 3D software (Dolphin Imaging & Management Solutions, Chatsworth, CA). This software measured the condylar volume above the deepest point of the sigmoid notch, the lower arch midline deviation, and the overjet. RESULTS: The condyle with hyperplasia exhibited the largest volume (1.97 ± 0.52 cm3) and a statistically significant difference compared with the contralateral condyle (χ2 = 14.30; P < .01). The Class III condyle exhibited relative symmetry of volume between the left and right sides. These condyles exhibited a larger volume compared with the non-hyperplastic condyles in the UCH group, with a statistically significant difference (χ2 = 6.22; P = .013; χ2 = 5.50; P = .019). CONCLUSIONS: Hyperplastic condyles were similar in volume to the condyles of patients with mandibular prognathism, suggesting that patients with a Class III skeletal relation could exhibit bilateral condylar hyperplasia.

DEPENDENCE OF MORPHOMETRIC PARAMETERS OF THE DENTAL OCCLUSION ON THE TYPE OF THE LOWER JAW GROWTH IN CHILDREN WITH CLASS II1 DENTOFACIAL ANOMALIES WHO LINE IN THE NORTHERN UKRAINE.

The aim of the work was to study the structure of dentofacial anomalies in children and adolescents in Sumy city and Sumy oblast, to identify dentoalveolar morphological peculiarities of the occlusion in 10-13 years old patients with class ІІ1 anomalies according to Angle's classification with different types of lower jaw bone growth. A retrospective analysis of 2236 outpatient dental cards of urban and rural patients with orthodontic pathology was conducted. Patients were divided into three age groups: 6-9 years old (early mixed occlusion) - 592 children; 10-13 years old (late mixed occlusion) - 1180 children; over 13 years old (permanent occlusion) - 464 persons; besides 76 patients with class ІІ1 anomalies according to Angle's classification aged 10-13 years were examined. To determine the type of lower jaw growth, the children underwent orthopantomographic examination, diagnostic models were made and biometric indicators were calculated to determine the severity of the morphological changes. It was established that anomalies of individual teeth and dental curve dominated in all age groups (71.24%). Among the occlusion anomalies, a large part falls to class ІІ anomalies according to Angle's classification (19.18%). A third of these patients have a neutral type of lower jaw growth (36.84±5.53%), horizontal and vertical types of growth reach 18.42±4.47% and 19.74±4.56%, respectively. The combination of neutral and vertical type of growth of the lower jaw occurs in 1.7 times more than the combination of neutral and horizontal. The most pronounced morphological changes were observed in the group of patients with a horizontal type of lower jaw growth. When planning treatment and prophylactic measures among patients of the orthodontic profile, it is necessary to take into account the peculiarities of both the prevalence of pathology in the region and the morphological changes of different severity in the dental curves of the jaws.

Radiology of Cleft Lip and Palate: Imaging for the Prenatal Period and throughout Life.

Recent advances in prenatal imaging have made possible the in utero diagnosis of cleft lip and palate and associated deformities. Postnatal diagnosis of cleft lip is made clinically, but imaging still plays a role in detection of associated abnormalities, surgical treatment planning, and screening for or surveillance of secondary deformities. This article describes the clinical entities of cleft lip with or without cleft palate (CLP) and isolated cleft palate and documents their prenatal and postnatal appearances at radiography, ultrasonography (US), magnetic resonance (MR) imaging, and computed tomography (CT). Imaging protocols and findings for prenatal screening, detection of associated anomalies, and evaluation of secondary deformities throughout life are described and illustrated. CLP and isolated cleft palate are distinct entities with shared radiologic appearances. Prenatal US and MR imaging can depict clefting of the lip or palate and associated anomalies. While two- and three-dimensional US often can depict cleft lip, visualization of cleft palate is more difficult, and repeat US or fetal MR imaging should be performed if cleft palate is suspected. Postnatal imaging can assist in identifying associated abnormalities and dentofacial deformities. Dentofacial sequelae of cleft lip and palate include missing and supernumerary teeth, oronasal fistulas, velopharyngeal insufficiency, hearing loss, maxillary growth restriction, and airway abnormalities. Secondary deformities can often be found incidentally at imaging performed for other purposes, but detection is necessary because they may have considerable implications for the patient.

[DYNAMICS OF DENTAL CARIES' INDEXES IN CHILDREN WITH DENTOALVEOLAR ANOMALIES UNDER THE INFLUENCE OF PREVENTIVE MEASURES].

Frequency dentition anomalies in children and adolescents according to different authors, ranging from rising 50.8 to 81%. Anomalies of dental systems lead to aesthetic and functional disturbances affecting the child's psyche, and often lead to the development of dental caries and periodontal diseases. So, the purpose of our study was to investigate the dynamics of dental caries' indexes in children with dentoalveolar anomalies under the influence of preventive measures. We observed 50 children aged 12, who were divided into four groups. The most effective prophylactic complex in terms of reduction of growth of caries (59.4%) was the one that involved the use of "Tooth Mousse" (applying to the surface of the teeth 5 minutes after eating one time a day, in the morning after brushing teeth), "Osteovit" (one tablet three times a day), "Pektodent--dentifrice? (dental cleaning powder twice a day--in the morning and evening). This complex creates conditions for increasing the resistance of hard dental tissues, resulting in low levels of intensity of caries in children.

Assessment of skeletal stability after counterclockwise rotation of the maxillomandibular complex in patients with long-face pattern subjected to orthognathic surgery.

BACKGROUND: The aim of this study was to evaluate the long-term skeletal stability of counterclockwise maxillomandibular complex rotation in patients undergoing orthognathic surgery for long-face pattern. METHODS: This retrospective study consisted of 10 patients who underwent the procedure between September 2002 and April 2008. To assess the skeletal stability, 30 preoperative (T1), recent postoperative (T2), and late postoperative (T3) cephalometric radiographs of the 10 patients were digitized and traced. To measure the stability in the occlusal plane and mandibular plane, the cephalometric points and planes were determined 3 times. RESULTS: In the long term, on average, the A-point moved 0.21 mm backward (AYT3-AYT2), the B-point moved 0.57 mm backward (BYT3-BYT2), and the posterior nasal spine moved 0.31 mm backward (PNSYT3-PNSYT2). On average, the anterior maxillary area (A-point) moved 0.14 mm downward (AXT3-AXT2), the mandible (B-point) moved 0.07 mm downward (BXT3-BXT2), and the posterior nasal spine moved approximately 0.18 mm upward (PNSXT3-PNSXT2). The occlusal plane increased by 0.75 degrees (OPT3-OPT2), and the mandibular plane increased by 0.45 degrees (MPT3-MPT2). CONCLUSIONS: It was observed that the counterclockwise rotation of the maxillomandibular complex produces stable results in patients with long-face pattern undergoing orthognathic surgery.

Treatment of dentofacial deformities secondary to condylar hyperplasia.

Dentofacial deformities secondary to condylar hyperplasiais a kind of disease presenting facial asymmetry, malocclusion, temporomandibular joint dysfunction, and other symptoms caused by non-neoplastic hyperplasia of the condyle. The etiology is still unknown, and currently, pre- and post-operative orthodontics accompanied by orthognathic surgery, temporomandibular joint surgery and jawbone contouring surgery are the main treatment methods. A personalized treatment plan was developed, considering the active degree of condyle hyperplasia, the severity of the jaw deformity, and the patient's will, to correct deformity, obtain ideal occlusal relationship, and regain good temporomandibular joint function. Combined with the author's clinical experience, the etiology, clinical and imageological features, treatment aims, and surgical methods of condylar hyperplasia and secondary dentofacial deformities were discussed in this paper.

Observer agreement of imaging measurements used for evaluation of dentofacial deformity in juvenile idiopathic arthritis.

OBJECTIVES: To examine the precision of imaging measures commonly used to assess mandibular morphology in children and adolescents with juvenile idiopathic arthritis (JIA). Secondly, to compare cone-beam computed tomography (CBCT) and magnetic resonance imaging (MRI) in the measurement of condylar height. METHODS: Those included were children diagnosed with JIA during 2015-18 who had had an MRI, a CBCT of the temporomandibular joints (TMJs) and a lateral cephalogram (ceph) of the head within one month of each other. Agreement within and between observers and methods was examined using Bland-Altman mean-difference plots and 95% limits of agreement (LOA). A 95% LOA within 15% of the sample mean was considered acceptable. Minimal detectable change (MDC) within and between observers was estimated. RESULTS: 90 patients (33 males) were included, with a mean age of 12.8 years. For MRI, intra- and interobserver 95% LOA were relatively narrow for total mandibular length: 9.6% of the sample mean. For CBCT, condylar height, both intra- and interobserver 95% LOA were wide: 16.0 and 28.4% of the sample mean, respectively. For ceph, both intra- and interobserver 95% LOA were narrow for the SNA-angle and gonion angle: 5.9 and 8% of the sample mean, and 6.2 and 6.8%, respectively. CONCLUSIONS: We have identified a set of precise measurements for facial morphology assessments in JIA, including one MRI-based (total mandibular length), one CBCT-based (condylar height), and three ceph-based. Condylar height was higher for MRI than for CBCT; however, the measurement was too imprecise for clinical use. MDC was also determined for a series of measurements.

Deep learning based discrimination of soft tissue profiles requiring orthognathic surgery by facial photographs.

Facial photographs of the subjects are often used in the diagnosis process of orthognathic surgery. The aim of this study was to determine whether convolutional neural networks (CNNs) can judge soft tissue profiles requiring orthognathic surgery using facial photographs alone. 822 subjects with dentofacial dysmorphosis and / or malocclusion were included. Facial photographs of front and right side were taken from all patients. Subjects who did not need orthognathic surgery were classified as Group I (411 subjects). Group II (411 subjects) was set up for cases requiring surgery. CNNs of VGG19 was used for machine learning. 366 of the total 410 data were correctly classified, yielding 89.3% accuracy. The values of accuracy, precision, recall, and F1 scores were 0.893, 0.912, 0.867, and 0.889, respectively. As a result of this study, it was found that CNNs can judge soft tissue profiles requiring orthognathic surgery relatively accurately with the photographs alone.

Condyle modeling stability, craniofacial asymmetry and ACTN3 genotypes: Contribution to TMD prevalence in a cohort of dentofacial deformities.

Craniofacial asymmetry, mandibular condylar modeling and temporomandibular joint disorders are common comorbidities of skeletally disproportionate malocclusions, but etiology of occurrence together is poorly understood. We compared asymmetry, condyle modeling stability and temporomandibular health in a cohort of 128 patients having orthodontics and orthognathic surgery to correct dentofacial deformity malocclusions. We also compared ACTN3 and ENPP1 genotypes for association to clinical conditions. Pre-surgical posterior-anterior cephalometric and panometric radiographic analyses; jaw pain and function questionnaire and clinical examination of TMD; and SNP-genotype analysis from saliva samples were compared to assess interrelationships. Almost half had asymmetries in need of surgical correction, which could be subdivided into four distinct morphological patterns. Asymmetric condyle modeling between sides was significantly greater in craniofacial asymmetry, but most commonly had an unanticipated pattern. Often, longer or larger condyles occurred on the shorter mandibular ramus side. Subjects with longer ramus but dimensionally smaller condyles were more likely to have self-reported TMD symptoms (p = 0.023) and significantly greater clinical diagnosis of TMD (p = 0 .000001), with masticatory myalgia most prominent. Genotyping found two significant genotype associations for ACTN3 rs1671064 (Q523R missense) p = 0.02; rs678397 (intronic SNP) p = 0.04 and one significant allele association rs1815739 (R577X nonsense) p = 0.00. Skeletal asymmetry, unusual condyle modeling and TMD are common and interrelated components of many dentofacial deformities. Imbalanced musculoskeletal functional adaptations and genetic or epigenetic influences contribute to the etiology, and require further investigation.

Assessment of dentofacial growth deviation in juvenile idiopathic arthritis: Reliability and validity of three-dimensional morphometric measures.

INTRODUCTION: Patients with juvenile idiopathic arthritis (JIA) and involvement of the temporomandibular joint (TMJ) often experience abnormal facial growth. Three-dimensional (3D) assessment of dentofacial growth deviation has become more common with advancement and commercialization of imaging technologies. However, no standardized guidelines exist for interpretation of 3D imaging in patients with JIA. The aim of this study was to propose and validate morphometric measures for the 3D radiographic assessment of dentofacial growth deviation in patients with JIA to enhance: 1) Description of dentofacial growth deviation; 2) Treatment planning; 3) Longitudinal follow-up. METHODS: The study was conducted in a standardized sequential-phased approach involving: 1) Preliminary decision-making; 2) Item generation; 3) Test of content-validity; 4) Test of reliability; 5) Test of construct validity; 6) Establishment of final recommendations. RESULTS: Twenty-one morphometric measures were evaluated. Based on results of reliability and validity-testing including subjects with JIA (n = 70) and non-JIA controls (n = 19), seven measures received a "high recommendation" score. Those measures were associated with posterior mandibular height, occlusal cant, mandibular asymmetry, mandibular inclination, and anterior/posterior lower face height. Nine other measures were "moderately recommended" and five received a "somewhat recommendation" score. CONCLUSION: Seven morphometric measures were considered very useful in the 3D assessment of growth deviation in patients with TMJ disease associated with JIA. These variables can be used to standardize the description of dentofacial deformities and to plan corrective interventions.

Surgical treatment of class II dento-facial deformity during adolescence: Long-term follow-up.

PURPOSE: The purpose of this study is to evaluate the long-term stability of patients operated during adolescence on the base of clinical measurements and cephalometric analysis. Although, the potential benefits of early orthognathic surgery are known to be a reduction in treatment times and a greater healing potential leading to a better adaptation and stability of the occlusion, muscles, bones and joints, no consensus can be found in literature on the minimum age for surgical correction. MATERIALS AND METHODS: In this study, thirty patients (age ≤ 15) with a class II dento-skeletal malocclusion were selected, of which 11 having a hyperdivergent (II,1) and 19 a hypodivergent (II,2) growth pattern, representing 2 distinct groups with a different treatment plan and long-term behavior. RESULTS AND CONCLUSION: Observing the performance of all parameters over-time, it is seen that subjects belonging to division II,2 have a modification of the growth vectors maintaining the harmonious development between the jaws and the facial aesthetics. Less predictable is the trend in hyperdivergent patients, which are more prone to relapse in the long-term. Early surgery in these patients should be considered in the light of the degree of deformity and its influence felt by the patient on his development of self-image and interpersonal relationship.