In vivo prediction of temporomandibular joint disc thickness and position changes for different jaw positions.

Temporomandibular joint disorders (TMD) are common dysfunctions of the masticatory region and are often linked to dislocation or changes of the temporomandibular joint (TMJ) disc. Magnetic resonance imaging (MRI) is the gold standard for TMJ imaging but standard clinical sequences do not deliver a sufficient resolution and contrast for the creation of detailed meshes of the TMJ disc. Additionally, bony structures cannot be captured appropriately using standard MRI sequences due to their low signal intensity. The objective of this study was to enable researchers to create high resolution representations of all structures of the TMJ and consequently investigate morphological as well as positional changes of the masticatory system. To create meshes of the bony structures, a single computed tomography (CT) scan was acquired. In addition, a high-resolution MRI sequence was produced, which is used to collect the thickness and position change of the disc for various static postures using bite blocks. Changes in thickness of the TMJ disc as well as disc translation were measured. The newly developed workflow successfully allows researchers to create high resolution models of all structures of the TMJ for various static positions, enabling the investigation of TMJ disc translation and deformation. Discs were thinnest in the lateral part and moved mainly anteriorly and slightly medially. The procedure offers the most comprehensive picture of disc positioning and thickness changes reported to date. The presented data can be used for the development of a biomechanical computer model of TMJ anatomy and to investigate dynamic and static loads on the components of the system, which could be useful for the prediction of TMD onset.

Temporomandibular Joint Condyle-Disc Morphometric Sexual Dimorphisms Independent of Skull Scaling.

PURPOSE: Approximately 2 to 4% of the US population have been estimated to seek treatment for temporomandibular symptoms, predominately women. The study purpose was to determine whether sex-specific differences in temporomandibular morphometry result from scaling with sex differences in skull size and shape or intrinsic sex-specific differences. MATERIALS AND METHODS: A total of 22 (11 male [aged 74.5 ± 9.1 years]; 11 female [aged 73.6 ± 12.8 years]) human cadaveric heads with no history of temporomandibular disc derangement underwent cone beam computed tomography and high-resolution magnetic resonance imaging scanning to determine 3-dimensional cephalometric parameters and temporomandibular morphometric outcomes. Regression models between morphometric outcomes and cephalometric parameters were developed, and intrinsic sex-specific differences in temporomandibular morphometry normalized by cephalometric parameters were determined. Subject-specific finite element (FE) models of the extreme male and extreme female conditions were developed to predict variations in articular disc stress-strain under the same joint loading. RESULTS: In some cases, sex differences in temporomandibular morphometric parameters could be explained by linear scaling with skull size and shape; however, scaling alone could not fully account for some differences between sexes, indicating intrinsic sex-specific differences. The intrinsic sex-specific differences in temporomandibular morphometry included an increased condylar medial length and mediolateral disc lengths in men and a longer anteroposterior disc length in women. Considering the extreme male and female temporomandibular morphometry observed in the present study, subject-specific FE models resulted in sex differences, with the extreme male joint having a broadly distributed stress field and peak stress of 5.28 MPa. The extreme female joint had a concentrated stress field and peak stress of 7.37 MPa. CONCLUSIONS: Intrinsic sex-specific differences independent of scaling with donor skull size were identified in temporomandibular morphometry. Understanding intrinsic sex-specific morphometric differences is critical to determining the temporomandibular biomechanics given the effect of anatomy on joint contact mechanics and stress-strain distributions and requires further study as one potential factor for the increased predisposition of women to temporomandibular disc derangement.

Choosing sheep (Ovis aries) as animal model for temporomandibular joint research: Morphological, histological and biomechanical characterization of the joint disc.

Preclinical trials are essential to the development of scientific technologies. Remarkable molecular and cellular research has been done using small animal models. However, significant differences exist regarding the articular behavior between these models and humans. Thus, large animal models may be more appropriate to perform trials involving the temporomandibular joint (TMJ). The aim of this work was to make a morphological (anatomic dissection and white light 3D scanning system), histological (TMJ in bloc was removed for histologic analysis) and biomechanical characterization (tension and compression tests) of sheep TMJ comparing the obtained results with human data. Results showed that sheep processus condylaris and fossa mandibularis are anatomically similar to the same human structures. TMJ disc has an elliptical perimeter, thinner in the center than in periphery. Peripheral area acts as a ring structure supporting the central zone. The disc cells display both fibroblast and chondrocyte-like morphology. Marginal area is formed by loose connective tissue, with some chondrocyte-like cells and collagen fibers in diverse orientations. Discs obtained a tensile modulus of 3.97±0.73MPa and 9.39±1.67MPa, for anteroposterior and mediolateral assessment. The TMJ discs presented a compressive modulus (E) of 446.41±5.16MPa and their maximum stress value (σmax) was 18.87±1.33MPa. Obtained results suggest that these animals should be considered as a prime model for TMJ research and procedural training. Further investigations in the field of oromaxillofacial surgery involving TMJ should consider sheep as a good animal model due to its resemblance of the same joint in humans.

Changes in temporomandibular joint morphology in class II patients treated with fixed mandibular repositioning and evaluated through 3D imaging: a systematic review.

To estimate the effects of skeletal class II malocclusion treatment using fixed mandibular repositioning appliances on the position and morphology of the temporomandibular joint (TMJ). Two independent reviewers performed comprehensive electronic searches of MEDLINE, EMBASE, EBM reviews and Scopus (until May 5, 2015). The references of the identified articles were also manually searched. All studies investigating morphological changes of the TMJ articular disc, condyle and glenoid fossa with 3D imaging following non-surgical fixed mandibular repositioning appliances in growing individuals with class II malocclusions were included in the analysis. Of the 269 articles initially reviewed, only 12 articles used magnetic resonance imaging and two articles used computed tomography (CT) or cone-beam CT images. Treatment effect on condyle and glenoid fossa was discussed in eight articles. Treatment effect on TMJ articular disc position and morphology was discussed in seven articles. All articles showed a high risk of bias due to deficient methodology: inadequate consideration of confounding variables, blinding of image assessment, selection or absence of control group and outcome measurement. Reported changes in osseous remodelling, condylar and disc position were contradictory. The selected articles failed to establish conclusive evidence of the exact nature of TMJ tissue response to fixed mandibular repositioning appliances.

Magnetic resonance imaging of temporomandibular joint: morphometric study of asymptomatic volunteers.

BACKGROUND: The aims of this study were to determine the best suited magnetic resonance imaging scanning plane, scanning sequence, and imaging modality for the evaluation of the temporomandibular joint (TMJ) and quantitatively assess the relationship of articular disk position to condyle position. METHODS: One hundred four TMJs in 52 symptom-free heads were examined by magnetic resonance imaging. The best scanning plane, scanning sequence, and scanning parameter were determined according to the imaging time and image quality. Bilateral symmetry of the articular disk and mandibular condyle was measured by using the automatic measurement of 3.0-T GE Excite Signa MR scanner. RESULTS: Fast spin-echo sequence, oblique sagittal imaging plane, and proton density imaging were the best suited scanning sequence, scanning planes, and imaging modality, respectively. The thicknesses of the anterior and posterior bands and for the intermediate zone were not statistically different for both sides. The posterior band of the disk was found to originate in an area adjacent to the 12-o'clock position of the condyle (± 5 degrees), whereas the anterior band of the disk originated adjacent to 1-o'clock position (28 ± 6 degrees). The anteroposterior diameter and mediolateral diameter of the condylar processes were not statistically different for both sides. The axial condylar angle between the plane of the greatest mediolateral diameter of the condylar processes and the midsagittal plane were also not statistically different for both sides. CONCLUSIONS: The magnetic resonance images can depict clearly major regional anatomic structures and position in the TMJ, which can be used in the early diagnosis for the TMJ disorder.

Evolution of occlusion and temporomandibular disorder in orthodontics: Past, present, and future.

Occlusion has been an important consideration in orthodontics since the beginning of the discipline. Early emphasis was placed on the alignment of the teeth, the stability of the intercuspal position, and the esthetic value of proper tooth positioning. These factors remain important to orthodontists, but orthopedic principles associated with masticatory functions must also be considered. Orthopedic stability in the masticatory structures should be a routine treatment goal to help reduce risk factors associated with developing temporomandibular disorders.

Effect of chin-cup treatment on the temporomandibular joint: a systematic review.

AIM: To systematically search the literature and assess the available evidence for the influence of chin-cup therapy on the temporomandibular joint regarding morphological adaptations and appearance of temporomandibular disorders (TMD). MATERIALS AND METHODS: Electronic database searches of published and unpublished literature were performed. The following electronic databases with no language and publication date restrictions were searched: MEDLINE (via Ovid and PubMed), EMBASE (via Ovid), the Cochrane Oral Health Group's Trials Register, and CENTRAL. Unpublished literature was searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database. The reference lists of all eligible studies were checked for additional studies. Two review authors performed data extraction independently and in duplicate using data collection forms. Disagreements were resolved by discussion or the involvement of an arbiter. RESULTS: From the 209 articles identified, 55 papers were considered eligible for inclusion in the review. Following the full text reading stage, 12 studies qualified for the final review analysis. No randomized clinical trial was identified. Eight of the included studies were of prospective and four of retrospective design. All studies were assessed for their quality and graded eventually from low to medium level of evidence. Based on the reported evidence, chin-cup therapy affects the condylar growth pattern, even though two studies reported no significance changes in disc position and arthrosis configuration. Concerning the incidence of TMD, it can be concluded from the available evidence that chin-cup therapy constitutes no risk factor for TMD. CONCLUSION: Based on the available evidence, chin-cup therapy for Class III orthodontic anomaly seems to induce craniofacial adaptations. Nevertheless, there are insufficient or low-quality data in the orthodontic literature to allow the formulation of clear statements regarding the influence of chin-cup treatment on the temporomandibular joint.

Stress analysis of temporomandibular joint disc during maintained clenching using a viscohyperelastic finite element model.

PURPOSE: People with bruxism exert parafunctional grinding and clenching activities. Those habits are suspected to be associated with temporomandibular disorder development. The aim of this study was to analyze the behavior of the temporomandibular joint disc under maintained clenching. MATERIALS AND METHODS: For this analysis, a viscohyperelastic finite element model was used. The model included half the mandible, the left disc, and the left temporal bone and used muscular efforts as loading conditions. The viscohyperelastic properties of the disc were based on literature data from asymptomatic human cadaveric disc specimens. RESULTS: Stresses in the disc decreased slightly (<15%) after 10 seconds of maintained clenching. In contrast, strains increased in nearly all disc regions, with the maximum (33%) in the lateral part of the disc. The greatest creep strain (-0.1) also was found in the lateral part. CONCLUSION: Results suggest that maintained clenching leads to an increase in strains in the entire disc and to greater creep strain in the lateral part. This may be related to disc damage.

Biochemical analysis of the articular disc of the temporomandibular joint with magnetic resonance T2 mapping: a feasibility study.

OBJECTIVES: Symptoms of temporomandibular joint (TMJ) dysfunction can seriously compromise patients' quality of life. The aim of our study was to use magnetic resonance imaging (MRI) T2 mapping of the articular disc to determine whether T2 mapping of the TMJ disc is feasible in routine clinical imaging and to assess the normal T2 relaxation time distribution within the TMJ. METHODS: Included were ten asymptomatic volunteers without pain, any mouth-opening limitations, or any clicking phenomena. MR imaging was performed on a 3-T MR scanner using a flexible, dedicated, eight-channel multielement coil. T2 mapping was performed in the oblique sagittal plane. The regions of interest (ROIs) for the T2 relaxation time maps of the disc were selected manually. RESULTS: The mean values for ROIs ranged between 22.4 and 28.8 ms, and the mean for all ROIs was 26.0 ± 5.0 ms. Intraclass correlation (ICC) for interobserver variability was 0.698, and ICC for intraobserver variability was 0.861. There was no statistically significant difference between raters (p = 0.091) or sides (p = 0.810). CONCLUSION: The T2 mapping technique enables ultrastructural analysis of the composition of TMJ disc. This biochemical technique is feasible in vivo, as shown in our study, when a high-field (3 T) MR and a dedicated TMJ coil are used. CLINICAL RELEVANCE: T2 mapping as a biochemical technique, together with morphological MRI, may help to gain more insights into the physiology and into the pathophysiology of the articular disc in the TMJ noninvasively and in vivo.

A reference line on temporomandibular joint MRI.

PURPOSE: The aim of this study was to establish a reference line and the 12 o'clock position on sagittal MRI images of the temporomandibular joint (TMJ) for close observation of early changes in disk position. MATERIALS AND METHODS: The study included 106 joints of 53 consecutive male and female patients (mean age 13.3 years) with available MRI and limited cone-beam computed tomography (LCBCT) images, from a pool of postorthodontic patients who had finished phase I or phase II orthodontic treatment between March 2006 and March 2008 in a private orthodontic office. High-resolution (0.1 pixel) LCBCT images taken in natural head position in the same time period and adjusted to the same magnification were superimposed on corresponding MRI images. The true horizontal line (THL) determined by natural head position on the LCBCT image was transferred to the MRI image. A clinically easy-to-use reference line (RL) approximating THL was drawn by connecting two readily locatable anatomical landmarks, the most inferior point of the articular eminence and the center of the auditory canal, and correspondence between THL and RL was assessed. RESULTS: The mean angle formed by THL and RL on the MRI images of the TMJs studied was 2.2° (SD 2.8°) clockwise around the center of the auditory canal, and the angulations of THL and RL on MRI images of the TMJs studied demonstrated a high positive correlation (r = 0.84). CONCLUSIONS: THL can be established directly on MRI images using the THL-RL angle obtained by this study in patients without advanced disk displacement resulting in bony changes of the joint. The deepest point on the glenoid fossa that meets the THL can be used as the 12 o'clock position for evaluation of incipient disk position change.

Lateral pterygoid muscle: a three-dimensional analysis of neuromuscular partitioning.

The lateral pterygoid (LP) has been implicated in temporomandibular joint (TMJ) pathology. Few studies have examined muscle architecture of the superior (SLP) and inferior (ILP) heads of LP; moreover, the pattern of intramuscular innervation is poorly defined. The purpose of this study was to determine patterns of intramuscular innervation of LP using 3D modeling. The superior and lateral aspects of LP were exposed in 10 embalmed cadaveric specimens. Nerves entering the muscle, all branches of the mandibular nerve (V(3) ), were followed intramuscularly in short segments and sequentially digitized. Muscle volume, surrounding bone, and the TMJ disc were also digitized. The data were reconstructed into 3D models (Maya®) that were used to determine patterns of intramuscular innervation. It was found that the SLP had independent sources of innervation to each of the quadrants in its superior part (masseteric/posterior deep temporal/middle deep temporal/buccal) and one primary source of innervation (buccal) to the quadrants of the inferior part. This difference in innervation is significant as the superior part attaches to the TMJ disc-capsule complex, whereas the inferior part attaches to the mandibular condylar neck. Differing sites of attachment and sources of innervation for each part suggests that movement of the TMJ disc-capsule complex, independent of the condyle, may be possible. The buccal nerve supplied both the medial and lateral quadrants of the ILP, with the medial quadrants receiving additional innervation from V(3) muscular branches. Results of this study could be used to direct EMG/ultrasound studies of LP function as related to TMJ disorders.

Ossification of the petrotympanic fissure: morphological analysis and clinical implications.

The petrotympanic fissure, a narrow slit in the temporal bone, allows the temporomandibular joint (TMJ) and the middle ear to communicate. Both the chorda tympani and the ligament cross the fissure between the posterior region of the joint disk and the malleolar ossicle. The parasympathetic fibers of the chorda tympani spread into the major salivary glands and are responsible for the taste sensibility on the anterior two-thirds of the tongue. After chronological identification of 30 human skulls, petrotympanic fissures were macroscopically and stereomicroscopically analyzed for the presence and disposition of ossification areas. Digitalized images were analyzed using computer program UTHSCSA ImageTool 3.0 (developed by the Department of Dental Diagnostic Science at The University of Texas Health Science Center, San Antonio, Texas). The total extension of the fissures and ossification areas was measured. The macroscopic analysis did not constitute an appropriated method for this evaluation and the ossification of the fissures increased with aging, suggesting its influence on the causes of otalgia in cases of TMJ dysfunction.

Human temporomandibular joint disc: anatomy and measurements in prenatal development.

The objective of this study was to determine morphological characteristics and measurements of the temporomandibular joint (TMJ) disc in human fetuses between 16 and 20 weeks of intrauterine life, and correlate it with oral-facial neuro-muscular maturing. Scanner images were used to record the length of the disc (D) and the thickness of its anterior middle and posterior bands in TMJ anteroposterior vertical sections from human fetuses of 16, 18 and 20 weeks of intrauterine life (WIL). Mean disc length was 1.98 mm, 2.69 mm and 2.90 mm at 16, 18 and 20 WIL respectively, and measurements differed significantly between those ages. The thicknesses of the anterior, middle and posterior bands also differed significantly. The results give normal morphological data for D between 16 and 20 WIL. TMJ anatomy and measurements appear to be related and agree with the neuro-muscular maturation time at which sucking and swallowing reflexes begin before birth. It is known that these functions, as well as the neuro-muscular capacity to perform prenatal mandibular movements (opening and closing), begin at 14 to 15 weeks of prenatal development and are fully attained at about 20 weeks of development. Knowledge of this reference pattern may be of major importance to future research, for assessing jaw biomechanics and detecting alterations of TMJ and prenatal development of a vital human function - suckling in preterm infants.

Expression of chondromodulin-1 in the temporomandibular joint condylar cartilage and disc.

BACKGROUND: The temporomandibular joint (TMJ) cartilage consists of condylar cartilage and disc and undergoes continuous remodeling throughout post-natal life. To maintain the integrity of the TMJ cartilage, anti-angiogenic factors play an important role during the remodeling process. In this study, we investigated the expression of the anti-angiogenic factor, chondromodulin-1 (ChM-1), in TMJ cartilage and evaluate its potential role in TMJ remodeling. METHODS: Eight TMJ specimens were collected from six 4-month-old Japanese white rabbits. Safranin-O staining was performed to determine proteoglycan content. ChM-1 expression in TMJ condylar cartilage and disc was determined by immunohistochemistry. Three human perforated disc tissue samples were collected for investigation of ChM-1 and vascular endothelial growth factor (VEGF) distribution in perforated TMJ disc. RESULTS: Safranin-O stained weakly in TMJ compared with tibial articular and epiphyseal cartilage. In TMJ, ChM-1 was expressed in the proliferative and hypertrophic zone of condylar cartilage and chondrocyte-like cells in the disc. No expression of ChM-1 was observed in osteoblasts and subchondral bone. ChM-1 and VEGF were both similarly expressed in perforated disc tissues. CONCLUSIONS: ChM-1 may play a role in the regulation of TMJ remodeling by preventing blood vessel invasion of the cartilage, thereby maintaining condylar cartilage and disc integrity.

Examination of the heads of the lateral pterygoid muscle on the temporomandibular joint.

The lateral pterygoid muscles (LPMs) function as a unit during precise mandibular positioning movements that occur during such activities as speech, singing, or playing musical instruments. The LPM has been the focus of an attempt to explain problems associated with the temporomandibular joint and anterior displacement of the meniscus of the joint. The aim of the study was to define the general morphology, describing the position and shape of the heads of the LPMs. In the course of dissection, the heads of the LPMs were noted, as well as the pattern, position of the origin and insertion, and course under 2.5x loupe magnification in 25 adult male human cadavers. The LPM has the general form of an irregular pyramid that narrows progressively toward the front. As a result of the macroscopic examination, the LPM was found to originate, with 3 heads as the superior LPM (SLPM), the inferior LPM (ILPM), and inner LPM. It was realized that the ILPM width was 3 times more than that of the SLPM. The SLPM ending fibers of LPM had a more tendinous structure compared with the ILPM ending fibers. The SLPM and ILPM were observed as being adhered mostly to the pterygoid fovea. The study has shown that the muscle has atypical penniform structure made up of 8 tendinous layers that were particularly well developed. It is an indisputable fact that the success in surgical strategy and planning mainly relies on the surgeon's knowledge of the variable origins and insertions of the LPM.

An anatomical study of the muscles that attach to the articular disc of the temporomandibular joint.

The masticatory muscles are generally described as the muscles that originate from the cranium and insert on the mandible. Some of the masticatory muscles also insert into the articular disc of the temporomandibular joint. Although there are numerous reports of studies on the attachment of the fibers to the disc, most reports discuss only one muscle. We have shown that the masticatory muscles are not simply a group of clearly independent muscles, but that these muscles contain various transitional muscle bundles among the major muscles. From this point of view, we carried out minute dissection of the collective muscles and muscle bundles surrounding the temporomandibular joint. We dissected 40 head halves of 20 Japanese cadavers (10 males, 10 females: average 79.6 yr). After complete removal of the bony elements, the structures surrounding the temporomandibular joint were investigated en-block. In all specimens, the superior surface of the upper head of lateral pterygoid and the midmedial muscle bundle were attached to the disc. In some specimens, the discotemporal bundle, zygomaticomandibularis, and masseter were attached to the anterior surface of the disc. The total vector of these muscles pulls the disc anteriorly. In contrast, the vector of the muscles to the condylar processes of the mandible pulls the mandible medially. From these observations, it seems that the fibers, which attach to the disc act to steady the disc against the masticatory movement.

Tissue Engineering for the Temporomandibular Joint.

Tissue engineering potentially offers new treatments for disorders of the temporomandibular joint which frequently afflict patients. Damage or disease in this area adversely affects masticatory function and speaking, reducing patients' quality of life. Effective treatment options for patients suffering from severe temporomandibular joint disorders are in high demand because surgical options are restricted to removal of damaged tissue or complete replacement of the joint with prosthetics. Tissue engineering approaches for the temporomandibular joint are a promising alternative to the limited clinical treatment options. However, tissue engineering is still a developing field and only in its formative years for the temporomandibular joint. This review outlines the anatomical and physiological characteristics of the temporomandibular joint, clinical management of temporomandibular joint disorder, and current perspectives in the tissue engineering approach for the temporomandibular joint disorder. The tissue engineering perspectives have been categorized according to the primary structures of the temporomandibular joint: the disc, the mandibular condyle, and the glenoid fossa. In each section, contemporary approaches in cellularization, growth factor selection, and scaffold fabrication strategies are reviewed in detail along with their achievements and challenges.

Anatomical and functional aspects of ligaments between the malleus and the temporomandibular joint.

The aim of this paper is to investigate the anatomical topography and the relationship between the ligaments, malleus and temporomandibular joint (TMJ) and to determine the role of these ligaments on the movement of the malleus. The malleus, incus, petrotympanic fissure (PTF), chorda tympani, anterior malleolar ligament (AML), discomallear ligament (DML), malleomandibular ligament, sphenomandibular ligament and articular disc were explored in 15 skulls. Traction and tension tests were carried out to clarify their role in malleolar movement. In 12 of the cases, two separate ligaments were connected to the anterior of the malleus, whereas a single ligament from the anterior of the malleus to the PTF was observed in 3 cases. In 12 cases, the DML united the retrodiscal tissues. In the other 3 cases, the medial and the lateral parts of the ligament were connected to the retrodiscal tissue after passing through the PTF. The thickness of the ligaments differed among specimens. When tension was applied to the DML no malleolar movement occurred, but when the AML was overstretched, significant movement was observed in 5 cadavers; little movement in 6 cadavers, and no movement in 4 cadavers. This study suggests that extreme stretching of the condyle in conjunction with the ligaments between the ossicles of the inner ear and the TMJ could be the reason for unexplained otological problems.

Three-dimensional temporomandibular joint modeling and animation.

The three-dimensional (3D) temporomandibular joint (TMJ) model derives from a study of the cranium by 3D virtual reality and mandibular function animation. The starting point of the project is high-fidelity digital acquisition of a human dry skull. The cooperation between the maxillofacial surgeon and the cartoonist enables the reconstruction of the fibroconnective components of the TMJ that are the keystone for comprehension of the anatomic and functional features of the mandible. The skeletal model is customized with the apposition of the temporomandibular ligament, the articular disk, the retrodiskal tissue, and the medial and the lateral ligament of the disk. The simulation of TMJ movement is the result of the integration of up-to-date data on the biomechanical restrictions. The 3D TMJ model is an easy-to-use application that may be run on a personal computer for the study of the TMJ and its biomechanics.