Locally delivered ethyl-2,5-dihydroxybenzoate using 3D printed bone implant for promotion of bone regeneration in a osteoporotic animal model.

Osteoporosis is a disease characterized by low bone mass, most commonly caused by an increase in bone resorption that is not matched by sufficient bone formation. The most common complications of postmenopausal osteoporosis are bone-related defects and fractures. Fracture healing is a multifactorial bone regeneration process, influenced by both biological and mechanical factors related to age, osteoporosis and stability of the osteosynthesis. During the treatment of bone defects in osteoporotic conditions, imbalanced bone remodeling is the leading cause for implant failure. To overcome these problems, ethyl-2,5-dihydroxybenzoate (E-2,5-DHB), a drug that promotes bone formation and inhibits bone resorption, was used. E-2,5-DHB-incorporating titanium (Ti) implants using poly(lactic-co-glycolic acid) (PLGA) coating for local delivery of E-2,5-DHB were developed and the effects on bone healing of femoral defects were evaluated in an osteoporotic model. The release of E-2,5-DHB resulted in decreased bone resorption and increased bone formation around the implant. Thus, it was confirmed that, in the osteoporotic model, bone healing was increased and implant fixation was enhanced. These results suggested that E-2,5-DHB-coated Ti implants have great potential as an ultimate local drug delivery system for bone tissue scaffolds.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometric imaging of synthetic polymer sample spots prepared using ionic liquid matrices.

RATIONALE: Polymer sample spots for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) prepared by the dried-droplet method often reveal ring formation accompanied by possible segregation of matrix and sample molecules as well as of the polymer homologs itself. Since the majority of sample spots are prepared by this simple and fast method, a matrix or sample preparation method that excludes such segregation has to be found. METHODS: Three different ionic liquid matrices based on conventionally used aromatic compounds for MALDI-TOF MS were prepared. The formation of ionic liquids was proven by (1) H NMR spectroscopy. MALDI-Imaging mass spectrometry was applied to monitor the homogeneity. RESULTS: Our results show a superior sample spot homogeneity using ionic liquid matrices. Spots could be sampled several times without visible differences in the mass spectra. A frequently observed loss of matrix in the mass spectrometer vacuum was not observed. The necessary laser irradiance was reduced, which resulted in less polymer fragmentation. CONCLUSIONS: Ionic liquid matrices can be used to overcome segregation, a typical drawback of conventional MALDI dried-droplet preparations. Homogeneous sample spots are easy to prepare, stable in the MS vacuum and, thereby, improve the reproducibility of MALDI.

Modified chitosan with different phenolic acids: Characterization, physicochemical properties, and biological activity.

This study synthesized five phenolic acid-chitosan copolymers utilizing the carbodiimide-mediated chemical crosslinking reaction. Comprehensive evaluations were conducted on their structural attributes, physicochemical properties, and biological activities. Fourier transform infrared confirmed successful grafting of phenolic acids onto chitosan via amide linkages. Additionally, ultraviolet-visible absorption spectroscopy and proton nuclear magnetic resonance analyses revealed novel absorption peaks between 200 and 400 nm and 6.0-8.0 ppm, respectively, attributable to the incorporated phenolic acids. Notably, the chitosan-gentisate acid copolymer exhibited significantly enhanced biological activity (p < 0.05) compared to pure chitosan and the other four conjugates, attributed to its highest grafting degree of approximately 295.93 mg/g. These modified chitosan derivatives effectively preserved the quality of sea bass (Lateolabrax japonicus) during refrigerated storage, extending its shelf-life by up to 9 days, 7 days, and 4 days relative to control, chitosan, and gentisate acid groups.

Solvent-based and solvent-free characterization of low solubility and low molecular weight polyamides by mass spectrometry: a complementary approach.

RATIONALE: Polyamides (PA) belong to the most used classes of polymers because of their attractive chemical and mechanical properties. In order to monitor original PA design, it is essential to develop analytical methods for the characterization of these compounds that are mostly insoluble in usual solvents. METHODS: A low molecular weight polyamide (PA11), synthesized with a chain limiter, has been used as a model compound and characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). In the solvent-based approach, specific solvents for PA, i.e. trifluoroacetic acid (TFA) and hexafluoroisopropanol (HFIP), were tested. Solvent-based sample preparation methods, dried-droplet and thin layer, were optimized through the choice of matrix and salt. Solvent-based (thin layer) and solvent-free methods were then compared for this low solubility polymer. Ultra-high-performance liquid chromatography/electrospray ionization (UHPLC/ESI)-TOF-MS analyses were then used to confirm elemental compositions through accurate mass measurement. RESULTS: Sodium iodide (NaI) and 2,5-dihydroxybenzoic acid (2,5-DHB) are, respectively, the best cationizing agent and matrix. The dried-droplet sample preparation method led to inhomogeneous deposits, but the thin-layer method could overcome this problem. Moreover, the solvent-free approach was the easiest and safest sample preparation method giving equivalent results to solvent-based methods. Linear as well as cyclic oligomers were observed. Although the PA molecular weights obtained by MALDI-TOF-MS were lower than those obtained by (1)H NMR and acido-basic titration, this technique allowed us to determine the presence of cyclic and linear species, not differentiated by the other techniques. TFA was shown to induce modification of linear oligomers that permitted cyclic and linear oligomers to be clearly highlighted in spectra. CONCLUSIONS: Optimal sample preparation conditions were determined for the MALDI-TOF-MS analysis of PA11, a model of polyamide analogues. The advantages of the solvent-free and solvent-based approaches were shown. Molecular weight determination using MALDI was discussed.

Spectral and time domain fluorescence spectroscopy of gentisic acid molecule in protic and aprotic polymer matrix.

In the present work, the effect of polymer microenvironment on the photophysics of gentisic acid molecule [2,5-dihydroxybenzoic acid] (GA), steady-state and time-domain fluorescence measurements at different pH conditions were carried out in protic [polyvinyl alcohol PVA] and aprotic [polymethyl methacrylate (PMMA)] polymer matrices. Change in the proticity of the microenvironment of the polymer traps different ionic species along with the neutral form of rotamer P and R conformers of GA molecule, are found to be responsible for the change in the spectral, multi-exponential decay behaviour. In protic polymer, the appearance of a single emission band indicates, dissociation of the GA molecule is very high, and it present as a monoanion along with hydrogen-bonded P and R rotamers. However, in the basic polymer film, most of the conformers of R converted to the anion. In contrast, protonation slows down the dissociation of both P and R forms in the acidic film. Unlike PVA matrix, in PMMA, dual emission band appears due to slow dissociation of GA molecule and hydrogen-bonded rotamer P, and R form exists with monoanion species. The magnitude of large stokes shifted red emission due to excited-state intramolecular proton transfers (ESIPT) found grater in rotamer P compared to its anionic species (green emission) and a blue emission corresponds to rotamer R.

Effect of gentisic acid on the structural-functional properties of liposomes incorporating ß-sitosterol.

Multifunctional liposomes incorporating ß-sitosterol were developed for delivery of gentisic acid (GA). The interactions of both compounds with phospholipid bilayer were interpreted viaeffects of different ß-sitosterol content (0, 20 and 50 mol %) and different gentisic acid to lipid ratio (nGA/nlip from 10-5 to 1) on membrane fluidity and thermotropic properties. Multilamellar vesicles of phosphatidylcholines (with size range between 1350 and 1900 nm) effectively encapsulated GA (54%) when nGA/nlip was higher than 0.01. Suppression of lipid peroxidation was directly related to concentration of GA. The resistance to diffusion of gentisic acid from liposomes increased for ˜50% in samples incorporating 50 mol % ß-sitosterol compared to sterol-free liposomes. Finally, simulated in vitro gastrointestinal conditions showed that the release was mainly affected by low pH of simulated gastric fluid and the presence of cholates in simulated intestinal fluid, rather than by enzymes activity.

Strategies for the analysis of poly(methacrylic acid) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

We evaluated several aqueous-based sample preparation protocols for the analysis of poly(methacrylic acid) (PMAA) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The sample contained a pentaerythritol tetra(3-mercaptopropionate) end-group, and was characterized in positive and negative ion modes using 2,5-dihydroxybenzoic acid (DHB) and 2,4,6-trihydroxyacetophenone (THAP) matrices. The major series observed were the [M + Na](+) species, in positive ion mode, and the [M - H](-) species, in negative ion mode. The performance of DHB and THAP matrices was comparable in positive ion mode, but THAP outperformed DHB in negative ion mode. The use of ion-exchange beads (IXB) benefited the analysis, while the addition of sodium acetate (NaOAc) or trifluoroacetic acid (TFA) proved disadvantageous in positive ion mode.

Dissipation of charge on MALDI-TOF polymeric chips using an electron-acceptor: analysis of proteins.

Disposable polymeric devices used for direct sample pretreatment/signal enhancement and MALDI-MS analyses of biomolecules suffer from the accumulation of electric charge and related positive mass shifts due to photoelectric effects on non-conductive surfaces after irradiation with lasers. The effects of surface charging on the mass shift of protein spectra during MALDI-TOF/MS measurements on copolymeric sample array chips were studied. Methyl viologen is used to monitor the development of charge and is demonstrated to be an effective electron scavenger. The use of such reducible species leads to increased accuracy, signal homogeneity, and resolution for mass spectral measurements of proteins in mixtures with sinapinic and 2,5-dihydroxybenzoic (DHB) acids. This approach can be used on a wide range of nonconductive support materials.

A highly sensitive carbapenemase assay using laser desorption/ionization mass spectrometry based on a parylene-matrix chip.

A quantitative carbapenemase assay was developed using laser desorption/ionization mass spectrometry (LDI-MS) based on a parylene-matrix chip. As a first step, the reproducibility (spot-to-spot, shot-to-shot, and day-to-day) of LDI-MS based on a parylene-matrix chip and the quantification ranges for four carbapenem antibiotics (doripenem, ertapenem, imipenem, and meropenem) were determined. A carbapenem-susceptibility test was performed using the four carbapenems and 51 bacterial strains that displayed (1) carbapenem resistance with carbapenemase, (2) carbapenem resistance without carbapenemase, or (3) carbapenem susceptibility. The susceptibility test results showed that LDI-MS based on a parylene-matrix chip was more sensitive and selective for detecting the carbapenemase reaction than conventional MALDI-TOF MS based on a 2,5-dihydroxybenzoic acid matrix.

Enhanced MALDI ionization efficiency at the metal-matrix interface: practical and mechanistic consequences of sample thickness and preparation method.

Electrosprayed spots of varying thickness were evaluated for use as reproducible, homogenous, high efficiency MALDI samples. Thin samples on stainless steel plates were found to give exceptionally strong signals, as did the last layers of thick samples, when ablated down to the steel substrate. A small enhancement was also observed for thin samples on a gold substrate, and with a few-nanometer gold coating on top of a thick sample. Ion yields and intensity ratios can be understood in the context of the previously described quantitative MALDI model including the matrix-metal interfacial ionization potential reduction effect (Knochenmuss, R.; Anal. Chem. 2004, 76, 3179-3184). The absolute and relative stabilities of ion signals were found to be at least a factor of two better for the thin electrosprayed spots, compared to spots prepared by dried droplet methods.

Protective effect of Tremella fuciformis Berk extract on LPS-induced acute inflammation via inhibition of the NF-κB and MAPK pathways.

Tremella fuciformis Berk (TFB) has long been used as a traditional medicine in Asia. Although TFB exhibits antioxidant and anti-inflammatory effects, the mechanisms of action responsible have remained unknown. We confirmed the anti-inflammatory effects of Tremella fuciformis Berk extract (TFE) in RAW 264.7 cells and observed significantly suppressed LPS-induced iNOS/NO and COX-2/PGE2 production. TFE also suppressed LPS-induced IKK, IkB, and p65 phosphorylation, as well as LPS-induced translocation of p65 from the cytosol. Additionally, TFE inhibited LPS-induced phosphorylation of MAPKs. In an acute inflammation study, oral administration of TFE significantly inhibited LPS-induced IL-1ß, IL-6 and TNF-α production and iNOS and COX-2 expression. The major bioactive compounds from TFB extract were identified as gentisic acid, protocatechuic acid, 4-hydroxybenzoic acid, and coumaric acid. Among these compounds, protocatechuic acid showed the strongest inhibitory effects on LPS-induced NO production in RAW 264.7 cells. Overall, these results suggest that TFE is a promising anti-inflammatory agent that suppresses iNOS/NO and COX-2/PGE2 expression, as well as the NF-κB and MAPK signaling pathways.

Antioxidant activity of rat parotid saliva.

BACKGROUND: The healing-promotion property of saliva has been observed in the past, but its underlying mechanism has never been elucidated. We hypothesized a mechanism based on salivary proteins binding to redox active metal ions, rendering them nonactive in their capacity for free radical production. METHODS: Examination of this mechanism was conducted by comparing the redox activity of protein-rich saliva with protein-poor saliva. We also examined the redox activity mediated by these 2 kinds of saliva following the in vitro addition of iron, copper, and manganese. Saliva samples were analyzed for their redox activity by measuring the ascorbate-driven and saliva (diluted 1:2)-mediated conversion of salicylate to its 2,3- and 2.5-dihydroxybenzoates and catechol metabolites. RESULTS: The concentrations of salicylate metabolites formed by protein-rich saliva were significantly lower by 45% (P < .05), 66% (P < .01), and 54% (P < .05), respectively, when compared with those formed by protein-poor saliva. The capacity of saliva in suppressing redox activity was found to be inversely related to the concentrations of iron and copper added (but not manganese), but correlated well with the protein content. When the highest concentrations of iron (15 mumol/L) and copper (10 mumol/L) were added to protein-rich saliva, the concentrations of salicylate metabolites produced were only 0.3% to 1% of those of non-saliva-containing controls (P < .01). However, when these concentrations of iron and copper were added to protein-poor saliva, significantly higher values of redox activity were detected, and the concentrations of the salicylate derivatives produced were 2.1% to 8.1% of those of non-saliva-containing controls (P < .01). In contrast, when the lowest concentrations of iron (2 mumol/L) and copper (0.1 mumol/L) were added, 2.8 to 4 times lower concentrations of salicylate derivatives were produced (P < .01). CONCLUSION: These results substantiate our hypothesis that saliva has a profound capacity for reducing redox activity rendered by transition metal ions, correlating well with its protein content.

Assay of acetylsalicylic acid and three of its metabolites in human plasma and urine using non-aqueous capillary electrophoresis with reversed electroosmotic flow.

The separation of acetylsalicylic acid and three of its metabolites--salicylic acid, salicyluric acid and gentisic acid--is demonstrated in a non-aqueous capillary electrophoresis system with reversed electroosmotic flow. Solvent mixtures of methanol and acetonitrile are used for the electrophoresis media and different electrolytes have been investigated. The flow is reversed by the addition of the polycation hexadimethrine bromide and thus a negative voltage is used. This system provides a fast and effective separation of the four analytes. The separation method was applied to the assay of acetylsalicylic acid and its major metabolites in plasma and urine and the limits of quantification for all of these compounds are about 5 microg ml(-1) in plasma and 25 microg ml(-1) in urine.

2,5-Dihydroxybenzoic acid solution in MALDI-MS: ageing and use for mass calibration.

2,5-Dihydroxybenzoic acid (DHB) is one of the most widely used and studied matrix compounds in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. However, the influence of ageing of the DHB solution on the MALDI mass spectra has not been yet systematically studied. In this work, the possible changes occurring in the acidified acetonitrile/water solution of the MALDI matrix compound DHB during 1-year usage period have been monitored with MALDI-Fourier transform ion cyclotron resonance mass spectrometer (MALDI-FT-ICR-MS) and attenuated total reflectance Fourier transform infrared (ATR-FT-IR) spectroscopy. No significant ageing products have been detected. The ability of the aged DHB solution to act as a MALDI matrix was tested with two materials widely used in art and conservation - bone glue (a proteinaceous material) and shellac resin (a resinous material) - and good results were obtained. A number of peaks in the mass spectra measured from the DHB solution were identified, which can be used for internal calibration of the mass axis.

Spectral reproducibility and quantification of peptides in MALDI of samples prepared by micro-spotting.

Previously, we reported that MALDI spectra of peptides became reproducible when temperature was kept constant. Linear calibration curves derived from such spectral data could be used for quantification. Homogeneity of samples was one of the requirements. Among the three popular matrices used in peptide MALDI [i.e., α-cyano-4-hydroxycinnamic acid (CHCA), 2,5-dihydroxybenzoic acid (DHB), and sinapinic acid (SA)], homogeneous samples could be prepared by conventional means only for CHCA. In this work, we showed that sample preparation by micro-spotting improved the homogeneity for all three cases.

Matrix segregation as the major cause for sample inhomogeneity in MALDI dried droplet spots.

The segregation in dried droplet MALDI sample spots was analyzed with regard to the matrix-to-sample ratio using optical microscopy, MALDI imaging mass spectrometry (MALDI MSI) and IR imaging spectroscopy. In this context, different polymer/matrix/solvent systems usually applied in the analysis of synthetic polymers were investigated. The use of typical matrix concentrations (10 mg mL⁻¹) in almost every case resulted in ring patterns, whereas higher concentrated matrix solutions always led to homogeneous sample spot layers. The data revealed that segregation is predominantly caused by matrix transport in the drying droplet, whereas polymer segregation seems to be only secondary.

Comparison of sample pre-treatments for laser desorption ionization and secondary ion mass spectrometry imaging of Miscanthus x giganteus.

Efforts to further the potential of the large perennial grass Miscanthusxgiganteus as a biofuel feedstock would be aided by the ability to image the chemical species present during the fuel production process. Toward this end, two mass spectrometry imaging (MSI) approaches have been investigated here-laser desorption/ionization mass spectrometry (LDI-MS) and secondary ion mass spectrometry (SIMS). As a first step, cross sections of Miscanthus were subjected to a variety of sample preparation methods to optimize conditions for MSI. For LDI-MS, a thin metal coating (2 nm thick Au) provided high quality signals of saccharide-related ions. The traditional matrix-assisted laser desorption/ionization matrix, 2,5-dihydroxybenzoic acid, also showed high efficiency for the desorption of saccharide-related ions. In contrast, with alpha-cyano-4-hydroxycinnamic acid matrix, these ions were nearly absent in the mass spectra. Direct laser ablation of untreated Miscanthus sections was also performed. High resolution images, where the fine structure of the vascular bundle could be clearly visualized, were obtained using SIMS. Although coating the sections with a nanometer thick Au layer can greatly enhance the quality of SIMS images, the coating had limited effect on secondary ion signal enhancement. Using the optimized mass spectrometry approaches described here, information on the spatial distribution of several saccharides was obtained.

Incoherent production reactions of positive and negative ions in matrix-assisted laser desorption/ionization.

Utilizing synchronized dual-polarity matrix-assisted laser desorption/ionization (MALDI) mass spectrometry, we found good evidence of the incoherent production of positive and negative matrix ions. Using thin, homogeneous 2,5-dehydroxybenzoic acid (DHB) matrix films, positive and negative matrix ions were found to appear at different threshold laser fluences. The presence of molecular matrix ions of single charge polarity suggests that the existence of DHB ion-pairs may not be a prerequisite in MALDI. Photoelectrons induced by the laser excitation may assist the production of negative DHB ions, as shown in experiments conducted with stainless steel and glass substrates. At high laser fluences, the relative yield of positive and negative matrix ions remained constant when homogeneous matrix films were used, but it fluctuated significantly with inhomogeneous crystal morphology. This result is also inconsistent with the hypothesis that matrix ion-pairs are essential primary ions. Evidence from both low and high laser fluences suggests that the productions of positive and negative matrix ions in MALDI may occur via independent pathways.

Flavonoid-matrix cluster ions in MALDI mass spectrometry.

The behaviour of 2,5-dihydroxybenzoic acid (2,5-DHB) matrix under matrix-assisted laser desorption/ionisation (MALDI) conditions was investigated, and the formation of 2,5-DHB cluster ions, mainly dehydrated 2,5-DHB ions, is reported. Interestingly, in the mass spectra of this compound, besides dimers and trimers, protonated tetramers, pentamers, hexamers and heptamers were also found with significant abundance.The MALDI behaviour of four flavonoids, quercetin, myricetin, luteolin and kaempferol, using 2,5-DHB as matrix, was also investigated. The mass spectra of the flavonoids studied revealed a number of flavonoid-2,5-DHB cluster ions (mainly with the dehydrated 2,5-DHB). The number of clusters formed is dependent on the structure of the analyte. For luteolin and kaempferol, in particular, evidence was found for the formation of cluster ions involving retro Diels Alder fragments and intact flavonoids molecules, as well as the corresponding protonated retro Diels Alder fragments with dehydrated DHB molecules. All ion compositions were attributed taking into account high accuracy mass measurements and tandem mass spectrometry experiments.

Metal ion attachment to the matrix meso-tetrakis(pentafluorophenyl)porphyrin, related matrices and analytes: an experimental and theoretical study.

In a previous study [van Kampen et al. Analytical Chemistry 2006; 78: 5403], we found that meso-tetrakis (pentafluorophenyl)porphyrin (F20TPP), in combination with lithium salts, provides an efficient matrix to cationize small molecules by Li+ attachment and that this combination can be successfully applied to the quantitative analysis of drugs, such as antiretroviral compounds using matrix-assisted laser desorption ionization in conjunction with a time-of-flight analyzer (MALDI-TOF). In the present study, we further explore the mechanism of metal ion attachment to F20TPP and analytes by MALDI-FTMS(/MS). To this end, we have studied the interaction of F20TPP and analytes with various mono-, di- and trivalent metal ions (Li+, Na+, K+, Rb+, Cs+, Co2+, Cu2+, Zn2+, Fe2+, Fe3+ and Ga3+). For the alkali cations, we find that F20TPP forms complexes only with Li+ and Na+; in addition, model analyte molecules such as poly(ethyleneglycol)s, mixed with F20TPP and the alkali cations, also only form Li+ and Na+ adducts. This contrasts sharply with the commonly used matrix 2,5-dihydroxybenzoic acid, where analytes are most efficiently cationized by Na+ or K+. Reasons for this difference are delineated. Ab initio calculations on porphyrin itself reveal that even the smallest alkali cation, Li+, does not fit in the porphyrin cavity, but lies on top of it, pushing the 21H and 23 H hydrogen atoms out of and below the plane with concomitant bending of the porphyrin skeleton in the opposite direction, i.e. toward the cation. Thus, the Li+ ion is not effectively sequestered and is in fact exposed and thus accessible for donation to analyte molecules. Interaction of F20TPP with di- and trivalent metal ions leads to protoporphyrin-metal ions, where the metal ion is captured within the protoporphyrin dianion cavity. The most intense signal is obtained when F20TPP is reacted with CuCl2 and then subjected to laser ablation. This method presents an easy general route to study the metal containing protoporphyrin molecules, which could all act as potential MALDI matrices.