One-step enrichment and stepwise elution of glycoproteins and phosphoproteins by hydrophilic Ti4+-immobilized dendrimer poly(glycidyl methacrylate) microparticles functionalized with polyethylenimine and phytic acid.

Glycosylation and phosphorylation rank as paramount post-translational modifications, and their analysis heavily relies on enrichment techniques. In this work, a facile approach was developed for the one-step simultaneous enrichment and stepwise elution of glycoproteins and phosphoproteins. The core of this approach was the application of the novel titanium (IV) ion immobilized poly(glycidyl methacrylate) microparticles functionalized with dendrimer polyethylenimine and phytic acid. The microparticles possessed dual enrichment capabilities due to their abundant titanium ions and hydroxyl groups on the surface. They demonstrate rapid adsorption equilibrium (within 30 min) and exceptional adsorption capacity for ß-casein (1107.7 mg/g) and horseradish peroxidase (438.6 mg/g), surpassing that of bovine serum albumin (91.7 mg/g). Furthermore, sodium dodecyl sulfate-polyacrylamide gel electrophoresis was conducted to validate the enrichment capability. Experimental results across various biological samples, including standard protein mixtures, non-fat milk, and human serum, demonstrated the remarkable ability of these microparticles to enrich low-abundance glycoproteins and phosphoproteins from biological samples.

A double boronic acid affinity "sandwich" SERS biosensor based on magnetic boronic acid controllable-oriented imprinting for high-affinity biomimetic specific recognition and rapid detection of target glycoproteins.

Transferrin (TRF), recognized as a glycoprotein clinical biomarker and therapeutic target, has its concentration applicable for disease diagnosis and treatment monitoring. Consequently, this study developed boronic acid affinity magnetic surface molecularly imprinted polymers (B-MMIPs) with pH-responsitivity as the "capture probe" for TRF, which have high affinity similar to antibodies, with a dissociation constant of (3.82 ± 0.24) × 10-8 M, showing 7 times of reusability. The self-copolymerized imprinted layer synthesized with dopamine (DA) and 3-Aminophenylboronic acid (APBA) as double monomers avoided nonspecific binding sites and produced excellent adsorption properties. Taking the gold nanostar (AuNS) with a branch tip "hot spot" structure as the core, the silver-coated AuNS functionalized with the biorecognition element 4-mercaptophenylboronic acid (MPBA) was employed as a surface-enhanced Raman scattering (SERS) nanotag (AuNS@Ag-MPBA) to label TRF, thereby constructing a double boronic acid affinity "sandwich" SERS biosensor (B-MMIPs-TRF-SERS nanotag) for the highly sensitive detection of TRF. The SERS biosensor exhibited a detection limit for TRF of 0.004 ng/mL, and its application to spiked serum samples confirmed its reliability and feasibility, demonstrating significant potential for clinical TRF detection. Moreover, the SERS biosensor designed in this study offers advantages in stability, detection speed (40 min), and cost efficiency. The portable Raman instrument for SERS detection fulfills the requirements for point-of-care testing.

Carbohydrate-Based Macromolecular Biomaterials.

Carbohydrates are the most abundant and one of the most important biomacromolecules in Nature. Except for energy-related compounds, carbohydrates can be roughly divided into two categories: Carbohydrates as matter and carbohydrates as information. As matter, carbohydrates are abundantly present in the extracellular matrix of animals and cell walls of various plants, bacteria, fungi, etc., serving as scaffolds. Some commonly found polysaccharides are featured as biocompatible materials with controllable rigidity and functionality, forming polymeric biomaterials which are widely used in drug delivery, tissue engineering, etc. As information, carbohydrates are usually referred to the glycans from glycoproteins, glycolipids, and proteoglycans, which bind to proteins or other carbohydrates, thereby meditating the cell-cell and cell-matrix interactions. These glycans could be simplified as synthetic glycopolymers, glycolipids, and glycoproteins, which could be afforded through polymerization, multistep synthesis, or a semisynthetic strategy. The information role of carbohydrates can be demonstrated not only as targeting reagents but also as immune antigens and adjuvants. The latter are also included in this review as they are always in a macromolecular formulation. In this review, we intend to provide a relatively comprehensive summary of carbohydrate-based macromolecular biomaterials since 2010 while emphasizing the fundamental understanding to guide the rational design of biomaterials. Carbohydrate-based macromolecules on the basis of their resources and chemical structures will be discussed, including naturally occurring polysaccharides, naturally derived synthetic polysaccharides, glycopolymers/glycodendrimers, supramolecular glycopolymers, and synthetic glycolipids/glycoproteins. Multiscale structure-function relationships in several major application areas, including delivery systems, tissue engineering, and immunology, will be detailed. We hope this review will provide valuable information for the development of carbohydrate-based macromolecular biomaterials and build a bridge between the carbohydrates as matter and the carbohydrates as information to promote new biomaterial design in the near future.

Designed proteins induce the formation of nanocage-containing extracellular vesicles.

Complex biological processes are often performed by self-organizing nanostructures comprising multiple classes of macromolecules, such as ribosomes (proteins and RNA) or enveloped viruses (proteins, nucleic acids and lipids). Approaches have been developed for designing self-assembling structures consisting of either nucleic acids or proteins, but strategies for engineering hybrid biological materials are only beginning to emerge. Here we describe the design of self-assembling protein nanocages that direct their own release from human cells inside small vesicles in a manner that resembles some viruses. We refer to these hybrid biomaterials as 'enveloped protein nanocages' (EPNs). Robust EPN biogenesis requires protein sequence elements that encode three distinct functions: membrane binding, self-assembly, and recruitment of the endosomal sorting complexes required for transport (ESCRT) machinery. A variety of synthetic proteins with these functional elements induce EPN biogenesis, highlighting the modularity and generality of the design strategy. Biochemical analyses and cryo-electron microscopy reveal that one design, EPN-01, comprises small (~100 nm) vesicles containing multiple protein nanocages that closely match the structure of the designed 60-subunit self-assembling scaffold. EPNs that incorporate the vesicular stomatitis viral glycoprotein can fuse with target cells and deliver their contents, thereby transferring cargoes from one cell to another. These results show how proteins can be programmed to direct the formation of hybrid biological materials that perform complex tasks, and establish EPNs as a class of designed, modular, genetically-encoded nanomaterials that can transfer molecules between cells.

Niosomal virosome derived by vesicular stomatitis virus glycoprotein as a new gene carrier.

Virosomes as membranous vesicles with viral fusion protein in their membrane are versatile vehicles for cargo delivery. The vesicular stomatitis virus glycoprotein (VSV-G) is a common fusogenic protein used in virosome preparation. This glycoprotein has been used in liposomal systems so far, but in this study, we have tried to use the niosomal form instead of liposome for. Niosomes are vesicular systems composed of non-ionic surfactants. Niosomes were constructed by the thin-film hydration method. VSV-G gene in pMD2.G plasmid was expressed in the HEK293T cell line and then was reconstituted in the niosome bilayer. The formation of niosomal virosomes was confirmed with different methods such as SDS-PAGE gel, western blotting, and transmission electron microscopy (TEM). The efficiency of niosomal virosome was investigated with the pmCherry reporter gene. SDS-PAGE and western blotting proved the expression and successful insertion of protein into the bilayer. The TEM images showed the spike projection of VSV-G on the surface of niosomes. The transfection results showed high efficiency of niosomal virosomes as a novel carrier. This report has verified that niosome could be used as an efficient bilayer instead of liposome to construct virosomes.

Facile Preparation of Hydrophilic Mesoporous Metal-Organic Framework via Synergistic Etching and Surface Functionalization for Glycopeptides Analysis.

In view of the size and hydrophilicity of glycopeptides, materials having suitable channels (size-exclusion) and strong hydrophilic surface (hydrophilic interaction) are preferred to enrich the glycopeptides in biological samples. Metal-organic frameworks (MOFs) are good candidates. However, their smaller microporous channels and low chemical stability have limited the application. Herein, a facile strategy was established to construct hydrophilic mesoporous MOF via synergistic etching and surface functionalization by using phytic acid (PA). Besides, polyvinylpyrrolidone (PVP) was added during MOF synthesis to enhance the water stability of the MOF. Owing to the expanded hydrophilic mesoporous channels, the PA-modified Ce-MOF effectively and selectively captured 422 glycopeptides from 155 glycoproteins in tryptic digests of human serum (2 µL). The present work sheds light on the easy fabrication of hydrophilic mesoporous materials, and this established material holds unique advantages for glycopeptides analysis in biological samples.

Targeted Theranostic of Cryptococcal Encephalitis by a Novel Polypyridyl Ruthenium Complex.

Cryptococcus neoformans (C. neoformans) is one of the most well-known zoonotic fungal pathogens. Cryptococcal encephalitis remains a major cause of morbidity and mortality in immunocompromised hosts. Effective and targeting killing of C. neoformans in the brain is an essential approach to prevent and treat cryptococcal encephalitis. In this study, a fluorescent polypyridyl ruthenium complex RC-7, {[phen2Ru(bpy-dinonyl)](PF6)2 (phen = 1,10-phenanthroline, bpy-dinonyl = 4,4'-dinonyl-2,2'-bipyridine)}, was screened out, which showed a highly fungicidal effect on C. neoformans. The values of minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) in antifungal activities were significantly lower than fluconazole as the control. Moreover, RC-7 was prepared as a brain-targeting nanoliposome (RDP-liposome; RDP is a peptide derived from rabies virus glycoprotein) for in vivo application. The results revealed that the liposomes could accumulate in the encephalitis brain and play an antifungal role. Compared with the cryptococcal encephalitis model mice, the RDP-liposomes remarkably prolonged the survival days of the encephalitis-bearing mice from 10 days to 24 days. Here, we introduce a polypyridyl ruthenium complex that could be used as a novel antifungal agent, and this study may have a broad impact on the development of targeted delivery based on ruthenium complex-loaded liposomes for theranostics of cryptococcal encephalitis.

Nano-crystalline cellulose-coated magnetic nanoparticles for affinity adsorption of glycoproteins.

A new core-shell structured nanomaterial based on Fe3O4 nanoparticles and 2,3-dialdehyde nanocrystalline cellulose (DAC) coating and its high efficiency in the preconcentration of glycoproteins were described in this work. DAC was obtained after the periodate oxidation of nanocrystalline cellulose to form aldehyde groups; then, Fe3O4 nanoparticles were coated with DAC, which were further attached to 4-aminophenylboronic acid (PBA) to form PBA-functionalized magnetic core-shell structured materials (Fe3O4@DAC-PBA). The oxidation of cellulose and the production of sufficient amounts of aldehyde group sites were essential for the preparation of Fe3O4@DAC-PBA used for the affinity adsorption of glycoproteins because the aldehyde groups on DAC allowed DAC to attach to the Fe3O4 nanoparticles and bind with PBA, which was active in forming a complex with the glyco sites in glycoproteins. Moreover, the preconcentration properties of Fe3O4@DAC-PBA through PBA adsorption can be pH-triggered without the disassembly of the structures; thus, the developed Fe3O4@DAC-PBA can be efficiently prepared to provide a promising affinity material for the affinity adsorption and purification of glycoproteins.

Characterization of biopolymers produced by planktonic and biofilm cells of Herbaspirillum lusitanum P6-12.

AIMS: The goal of this study was to characterize biopolymers from two modes of the Herbaspirillum lusitanum P6-12 growth: planktonic, in which cells are free swimming, and biofilm life style, in which the cells are sessile. METHODS AND RESULTS: Differences in biopolymers composition from planktonic and biofilm cells of H. lusitanum strain P6-12 were analysed using Fourier transform infrared spectroscopy (FTIR), sodium dodecyl sulphate-polyacrylamide gel electrophoresis, gas-liquid chromatography and spectrophotometry. A high degree of polymer separation and purification was achieved by ultracentrifugation, and column chromatography allowed us to identify the chemical differences between biopolymers from biofilm and planktonic H. lusitanum. It was shown that planktonic cells of H. lusitanum P6-12 when cultivated in a liquid medium to the end of the exponential phase of growth, produced two high-molecular-weight glycoconjugates (were arbitrarily called CPS-I and CPS-II) of a lipopolysaccharide (LPS) nature and a lipid-polysacharide complex (were arbitrarily called EPS). The EPS, CPS-I, CPS-II had different monosaccharide and lipid compositions. The extracellular polymeric matrix (EPM) produced by the biofilm cells was mostly proteinaceous, with a small amount of carbohydrates (up to 3%). From the biofilm culture medium, a free extracellular polymeric substance (was arbitrarily called fEPS) was obtained that contained proteins and carbohydrates (up to 7%). The cells outside the biofilm had capsules containing high-molecular-weight glycoconjugate (was arbitrarily called CPSFBC ) that consisted of carbohydrates (up to 10%), proteins (up to 16%) and lipids (up to 70%). CONCLUSIONS: During biofilm formation, the bacteria secreted surface biopolymers that differed from those of the planktonic cells. The heterogeneity of the polysaccharide containing biopolymers of the H. lusitanum P6-12 surface is probably conditioned by their different functions in plant colonization and formation of an efficient symbiosis, as well as in cell adaptation to existence in plant tissues. SIGNIFICANCE AND IMPACT OF THE STUDY: The results of the study permit a better understanding of the physiological properties of the biopolymers, for example, in plant-microbe interactions.

Rhamnomannans and Teichuronic Acid from the Cell Wall of Rathayibacter tritici VKM Ac-1603T.

The structures of three cell wall glycopolymers of the phytopathogen Rathayibacter tritici VKM Ac-1603T (family Microbacteriaceae, order Micrococcales, class Actinobacteria) were established by chemical methods and NMR spectroscopy. Polymer 1 is a branched rhamnomannan with the repeating unit →3)-α-[ß-D-Xylp-(1→2)]-D-Manp-(1→2)-α-D-Rhap-(1→3)-α-D-Manp-(1→2)-α-D-Rhap-(1→; polymer 2 is a linear rhamnomannan with the repeating unit →2)-α-D-Manp-(1→2)-α-D-Rhap-(1→3)-α-D-Manp-(1→2)-α-D-Rhap-(1→; polymer 3 is a branched teichuronic acid containing monosaccharide residues GlcA, Gal, Man, and Glc at a 1 : 1 : 1 : 5 ratio (see the text for the structures). It has been demonstrated that representatives of four Rathayibacter species studied to date (R. tritici VKM Ac-1603T, R. iranicus VKM Ac-1602 T, R. toxicus VKM Ac-1600 and "Rathayibacter tanaceti" VKM Ac-2596) contain differing patterns of phosphate-free glycopolymers. At the same time, the above Rathayibacter strains have a common property - the presence of rhamnomannans with D-rhamnose. These rhamnomannans may be linear or branched and differing in the positions of glycosidic bonds and side substituents. The presence in the cell wall of rhamnomannans with D-rhamnose may serve as useful chemotaxonomic marker of the genus Rathayibacter.

Milk fat globule membrane glycoproteins: Valuable ingredients for lactic acid bacteria encapsulation?

The membrane (Milk Fat Globule Membrane - MFGM) surrounding the milk fat globule is becoming increasingly studied for its use in food applications due to proven nutritional and technological properties. This review focuses first on current researches which have been led on the MFGM structure and composition and also on laboratory and industrial purification and isolation methods developed in the last few years. The nutritional, health benefits and techno-functional properties of the MFGM are then discussed. Finally, new techno-functional opportunities of MFGM glycoproteins as a possible ingredient for Lactic Acid Bacteria (LAB) encapsulation are detailed. The ability of MFGM to form liposomes entrapping bioactive compounds has been already demonstrated. One drawback is that liposomes are too small to be used for bacteria encapsulation. For the first time, this review points out the numerous advantages to use MFGM glycoproteins as a protecting, encapsulating matrix for bacteria and especially for LAB.

Electrospun polyacrylonitrile fibers with and without magnetic nanoparticles for selective and efficient separation of glycoproteins.

Polyacrylonitrile fibers with and without magnetic nanoparticles (Fe3O4 NPs) were prepared by electrospinning. The pure polyacrylonitrile (PAN) fibers and the composited polyacrylonitrile (PAN/Fe3O4) fibers were studied with respect to their capability for enrichment of glycoproteins. Specifically, the glycoproteins ovalbumin (OB) and transferrin (Trf) were studied and compared to the non-glycoproteins bovine serum albumin and lysozyme. Following adsorption and subsequent protein elution with 0.1 wt% of CTAB solution, the glycoproteins were analyzed by SDS polyacrylamide gel electrophoresis. The strong interaction between PAN or PAN/Fe3O4 fibers and glycoproteins is attributed to the synergistic effects of hydrophilic and hydrogen bond interactions. The PAN/Fe3O4 fibers have an attractive additional feature of allowing magnetic separation. The PAN and PAN/Fe3O4 fibers have a high adsorption capacity toward OB and Trf. The treated PAN/Fe3O4 fibers display good selectivity, fast adsorption kinetics, and were applied to extractions of mixed protein samples. The detection limits of OB and Trf are 0.32 and 0.22 µg·mL-1, respectively. The PAN/Fe3O4 fibers offered an alternative solution for adsorption of glycoproteins from biological samples. Graphical abstract The pure polyacrylonitrile (PAN) fibers and the composited polyacrylonitrile (PAN/Fe3O4) fibers were studied with respect to their capability for enrichment of glycoproteins: glycoproteins ovalbumin (OB) and transferrin (Trf). The treated PAN/Fe3O4 fibers showed fast adsorption kinetics, were applied in a physiological state, mixed and real samples.

Functional Glyco-Nanogels for Multivalent Interaction with Lectins.

Interactions between glycans and proteins have tremendous impact in biomolecular interactions. They are important for cell-cell interactions, proliferation and much more. Here, we emphasize the glycan-mediated interactions between pathogens and host cells. Pseudomonas aeruginosa, responsible for a huge number of nosocomial infections, is especially the focus when it comes to glycan-derivatives as pathoblockers. We present a microwave assisted protecting group free synthesis of glycomonomers based on lactose, melibiose and fucose. The monomers were polymerized in a precipitation polymerization in the presence of NiPAm to form crosslinked glyco-nanogels. The influence of reaction parameters like crosslinker type or stabilizer amount was investigated. The gels were characterized in lectin binding studies using model lectins and showed size and composition-dependent inhibition of lectin binding. Due to multivalent presentation of glycans in the gel, the inhibition was clearly stronger than with unmodified saccharides, which was compared after determination of the glycan loading. First studies with Pseudomonas aeruginosa revealed a surprising influence on the secretion of virulence factors. Functional glycogels may be in the future potent alternatives or adjuvants for antibiotic treatment of infections based on glycan interactions between host and pathogen.

Tablet formulation of Famotidine-loaded P-gp inhibiting nanoparticles using PLA-g-PEG grafted polymer.

Our work aimed at evaluating the use of permeability glycoprotein (P-gp) inhibiting nanoparticles (NPs) as a part of a suitable oral solid dosage to improve bioavailability. Famotidine (Pepcid®), a stomach acid production inhibitor, was used as a drug model to test our hypothesis. Famotidine-loaded NPs were prepared by solvent emulsion evaporation using PEG grafted on a polylactide acid (PLA) polymer backbone (PLA-g-PEG), with a 5% molar ratio of PEG versus lactic acid monomer and PEG of either 750 or 2000 Da molecular weight. Tablet formulation was composed of 40% Famotidine-loaded NPs, 52.5% microcrystalline cellulose as filler, 7% pre-gelatinized starch as binder/disintegrant, and 0.5% magnesium stearate as lubricant. Tablets containing 1.6 mg of Famotidine were prepared at an average weight of 500 mg, thickness of 6.2-6.5 mm, hardness of 5-8 kp, and disintegration time of <1 min. Our results suggest that Famotidine-loaded NPs using grafted PEG-g-PLA polymers can be formulated as an oral solid dosage form while effectively inhibiting P-gp mediated Famotidine efflux, irrespective of PEG molecular weights. This could therefore represent an attractive formulation alternative to enhance oral permeability and bioavailability of drugs that are P-gp substrates.

3-Carboxybenzoboroxole Functionalized Polyethylenimine Modified Magnetic Graphene Oxide Nanocomposites for Human Plasma Glycoproteins Enrichment under Physiological Conditions.

Boronate affinity materials have been successfully used for the selective recognition of glycoproteins. However, by such materials, the large-scale glycoproteins enrichment from human plasma under physiological conditions is rarely reported. In this work, 3-carboxybenzoboroxole (CBX) functionalized polyethylenimine (PEI) modified magnetic graphene oxide nanocomposites were synthesized. Benefitting from the low pKa value of CBX (∼6.9) and PEI dendrimer-assisted multivalent binding, the Freundlich constant (KF) for the adsorption of horseradish peroxidase (HRP) was 3.0-7.3 times higher than that obtained by previous work, displaying the high enrichment capacity. Moreover, PEI could improve the hydrophilicity of nanocomposites and reduce nonglycoprotein adsorption. Therefore, such nanocomposites were successfully applied to the analysis of human plasma glycoproteome under physiological conditions, and the identified glycoproteins number and recognition selectivity was increased when compared to the results obtained by previous boronic acid-functionalized particles (Sil@Poly(APBA-co-MBAAm)) under common alkaline condition (137 vs 78 and 67.8% vs 57.8%, respectively). In addition, thrombin (F2), an important plasma glycoprotein, labile under alkaline conditions, was specifically identified by our method, demonstrating the great promise of such nanocomposites in the deep-coverage glycoproteome analysis.

Efficient Assembly of Quantum Dots with Homogenous Glycans Derived from Natural N-Linked Glycoproteins.

Coating inorganic nanoparticles with polyethylene glycol (PEG)-appended ligands, as means to preserve their physical characteristics and promote steric interactions with biological systems, including enhanced aqueous solubility and reduced immunogenicity, has been explored by several groups. Conversely, macromolecules present in the human serum and on the surface of cells are densely coated with hydrophilic glycans that act to reduce nonspecific interactions, while facilitating specific binding and interactions. In particular, N-linked glycans are abundant on the surface of most serum proteins and are composed of a branched architecture that is typically characterized by a significant level of molecular heterogeneity. Here we provide two distinct methodologies, covalent bioconjugation and self-assembly, to functionalize two types of Quantum Dots with a homogeneous, complex-type N-linked glycan terminated with a sialic acid moiety. A detailed physical and functional characterization of these glycan-coated nanoparticles has been performed. Our findings support the potential use of such fluorescent platforms to sense glycan-involved biological processes, such as lectin recognition and sialidase-mediated hydrolysis.

Construction of Multivalent Homo- and Heterofunctional ABO Blood Group Glycoconjugates Using a Trifunctional Linker Strategy.

The design and synthesis of multivalent ligands displaying complex oligosaccharides is necessary for the development of therapeutics, diagnostics, and research tools. Here, we report an efficient conjugation strategy to prepare complex glycoconjugates with 4 copies of 1 or 2 separate glycan epitopes, providing 4-8 carbohydrate residues on a tetravalent poly(ethylene glycol) scaffold. This strategy provides complex glycoconjugates that approach the size of glycoproteins (15-18 kDa) while remaining well-defined. The synthetic strategy makes use of three orthogonal functional groups, including a reactive N-hydroxysuccinimide (NHS)-ester moiety on the linker to install the first carbohydrate epitope via reaction with an amine. A masked amine functionality on the linker is revealed after the removal of a fluorenylmethyloxycarbonyl (Fmoc)-protecting group, allowing the attachment to the NHS-activated poly(ethylene glycol) (PEG) scaffold. An azide group in the linker was then used to incorporate the second carbohydrate epitope via catalyzed alkyne-azide cycloaddition. Using a known tetravalent PEG scaffold (PDI, 1.025), we prepared homofunctional glycoconjugates that display four copies of lactose and the A-type II or the B-type II human blood group antigens. Using our trifunctional linker, we expanded this strategy to produce heterofunctional conjugates with four copies of two separate glycan epitopes. These heterofunctional conjugates included Neu5Ac, 3'-sialyllactose, or 6'-sialyllactose as a second antigen. Using an alternative strategy, we generated heterofunctional conjugates with three copies of the glycan epitope and one fluorescent group (on average) using a sequential dual-amine coupling strategy. These conjugation strategies should be easily generalized for conjugation of other complex glycans. We demonstrate that the glycan epitopes of heterofunctional conjugates engage and cluster target B-cell receptors and CD22 receptors on B cells, supporting the application of these reagents for investigating cellular response to carbohydrate antigens of the ABO blood group system.

Core-Corona Magnetic Nanospheres Functionalized with Zwitterionic Polymer Ionic Liquid for Highly Selective Isolation of Glycoprotein.

A novel zwitterionic polymer ionic liquid functionalized magnetic nanospheres, shortly as Fe3O4@PCL-PILs, is synthesized by grafting ionic liquid VimCOOHBr onto polymer ε-caprolactone (PCL) modified magnetic nanospheres via esterification and surface-initiated free radical polymerization. This established synthesis strategy offers the obtained magnetic nanospheres with well-defined core-corona structure, compact grafting layer, favorable zwitterionic and negative-charged surface, and high magnetic susceptibility. The as-prepared Fe3O4@PCL-PILs nanospheres exhibit typical "zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC)" behaviors toward protein binding, and selectively adsorption of glycoprotein is achieved. The adsorption capacity of the magnetic nanospheres toward Immunoglobulin G is high up to 1136.4 mg g-1, and the captured Immunoglobulin G could be efficiently recovered by using 0.5% NH3 H2O (v/v) as stripping reagent, providing a recovery of 80.5%. Fe3O4@PCL-PILs nanospheres are then employed as sorbent for the selective isolation of Immunoglobulin G from human whole blood, obtaining high-purity Immunoglobulin G as demonstrated by polyacrylamide gel electrophoresis assays.

Magnetic boronate modified molecularly imprinted polymers on magnetite microspheres modified with porous TiO2 (Fe3O4@pTiO2@MIP) with enhanced adsorption capacity for glycoproteins and with wide operational pH range.

Boronate-affinity based molecularly imprinted polymers (MIPs) are beset by the unsatisfied adsorption capacity and narrow working pH ranges. A magnetic molecularly imprinted polymer containing phenylboronic acid groups was placed on the surface of Fe3O4 (magnetite) microspheres coated with porous TiO2 (Fe3O4@pTiO2@MIP). In contrast to its silica analog (Fe3O4@SiO2@MIP), the flowerlike Fe3O4@pTiO2 offers more binding sites for templates. Thus, the adsorption capacity of the Fe3O4@pTiO2@MIP is strongly enhanced. The strong electron-withdrawing effects of Ti(IV) enable the boronic acid of the MIP to have better affinity for glycoproteins at a wide pH range from 6.0 to 9.0. Consequently, the Fe3O4@pTiO2@MIP exhibits higher adsorption for glycoproteins than Fe3O4@SiO2@MIP in both basic and acidic medium. The Fe3O4@pTiO2@MIPs were eluted with 5% acetic acid aqueous solution containing 30% acetonitrile, and the eluate was analyzed by MALDI-TOF MS. The method was applied to the selective extraction and quantitation of horseradish peroxidase (HRP) in spiked fetal bovine serum (FBS). The linear range is 0.40-10 µg·mL-1 with the limit of detection of 0.31 µg·mL-1. In our perception, this work has a wide scope in that is paves the way to a more widespread application of boronate affinity based MIPs for analysis of glycoproteins and related glyco compounds even at moderately acidic pH values. Graphical abstract Schematic presentation of the magnetic boronate modified molecularly imprinted polymer on magnetic spheres modified with porous TiO2 (Fe3O4@pTiO2@MIP). It was applied to extract glycoprotein in spiked both basic fetal bovine serum (FBS) and acidic urine samples prior to quantitation by MALDI-TOF mass spectrometry.

Alterations in the Salivary Proteome and N-Glycome of Sjögren's Syndrome Patients.

We used isobaric mass tagging (iTRAQ) and lectin affinity capture mass spectrometry (MS)-based workflows for global analyses of parotid saliva (PS) and whole saliva (WS) samples obtained from patients diagnosed with primary Sjögren's Syndrome (pSS) who were enrolled in the Sjögren's International Collaborative Clinical Alliance (SICCA) as compared with two control groups. The iTRAQ analyses revealed up- and down-regulation of numerous proteins that could be involved in the disease process (e.g., histones) or attempts to mitigate the ensuing damage (e.g., bactericidal/permeability increasing fold containing family (BPIF) members). An immunoblot approach applied to independent sample sets confirmed the pSS associated up-regulation of ß2-microglobulin (in PS) and down-regulation of carbonic anhydrase VI (in WS) and BPIFB2 (in PS). Beyond the proteome, we profiled the N-glycosites of pSS and control samples. They were enriched for glycopeptides using lectins Aleuria aurantia and wheat germ agglutinin, which recognize fucose and sialic acid/N-acetyl glucosamine, respectively. MS analyses showed that pSS is associated with increased N-glycosylation of numerous salivary glycoproteins in PS and WS. The observed alterations of the salivary proteome and N-glycome could be used as pSS biomarkers enabling easier and earlier detection of this syndrome while lending potential new insights into the disease process.