Engineering of spectator glycocalyx structures to evaluate molecular interactions at crowded cellular boundaries.

In the mucosal epithelium, the cellular glycocalyx can project tens to hundreds of nanometers into the extracellular space, erecting a physical barrier that provides protective functions, mediates the exchange of nutrients and regulates cellular interactions. Little is understood about how the physical properties of the mucosal glycocalyx influence molecular recognition at the cellular boundary. Here, we report the synthesis of PEG-based glycopolymers with tunable glycan composition, which approximate the extended architecture of mucin glycoproteins, and tether them to the plasma membranes of red blood cells (RBC) to construct an artificial mucin brush-like glycocalyx. We evaluated the association of two lectins, ConA and SNA, with their endogenous glycan ligands on the surface of the remodelled cells. The extended glycocalyx provided protection against agglutination of RBCs by both lectins; however, the rate and magnitude of ConA binding were attenuated to a greater degree in the presence of the glycopolymer spectators compared to those measured for SNA. The different sensitivity of ConA and SNA to glycocalyx crowding likely arises from the distinct presentation of their mannoside and sialoside receptors, respectively, within the native RBC glycocalyx.

"Sweet" Architecture-Dependent Uptake of Glycocalyx-Mimicking Nanoparticles Based on Biodegradable Aliphatic Polyesters by Macrophages.

Glyconanoparticles made by self-assembled glycopolymers currently are practical and efficient mimics of the glycocalyx on cell surfaces. Considering the complexity of the glycocalyx, glyconanoparticles with different sugars on their coronas, i.e., mixed-shell glycomicelles, could be more valuable compared to homoshell micelles. In this paper, we explore the architectural effect of the glyconanoparticle corona on glyconanoparticle macrophage endocytosis and lectin-binding ability. A series of glyconanoparticles composed of a biodegradable polyester backbone functionalized with galactoside or mannoside pendants were designed and prepared. The different architectures explored were single-component (galactoside or mannoside) coronas, homogeneously mixed coronas (MG) made by galactoside-mannoside copolymer chains, and blend-mixed coronas (M/G) constructed from two homoglycopolymers. Nanoparticles with a mixed shell showed a higher efficiency in cellular uptake and lectin-binding than those with a single sugar component. Meanwhile, unexpectedly, MG presented a significantly higher efficiency than M/G, although they had the same particle size and ratio of mannoside to galactoside. We attributed this apparent architectural effect to the difference in the phase behavior between MG and M/G; i.e., the former having a homogeneous corona allowed more sugar-receptor interactions in the contact region, while the latter having phase separation limited the simultaneous interaction of the two kinds of sugar units with the cell receptors.

Topological Defects in Hyperbranched Glycopolymers Enhance Binding to Lectins.

Central scaffold topology and carbohydrate density are important features in determining the binding mechanism and potency of synthetic multivalent of poly- versus monodisperse carbohydrate systems against a model plant toxin (Ricinus communis agglutinin (RCA120 )). Lower densities of protein receptors favour the use of heterogeneous, polydisperse glycoconjugate presentations, as determined by surface plasmon resonance and dynamic light scattering.

Enhancement of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) accumulation in Arxula adeninivorans by stabilization of production.

BACKGROUND: In recent years the production of biobased biodegradable plastics has been of interest of researchers partly due to the accumulation of non-biodegradable plastics in the environment and to the opportunity for new applications. Commonly investigated are the polyhydroxyalkanoates (PHAs) poly(hydroxybutyrate) and poly(hydroxybutyrate-co-hydroxyvalerate) (PHB-V). The latter has the advantage of being tougher and less brittle. The production of these polymers in bacteria is well established but production in yeast may have some advantages, e.g. the ability to use a broad spectrum of industrial by-products as a carbon sources. RESULTS: In this study we increased the synthesis of PHB-V in the non-conventional yeast Arxula adeninivorans by stabilization of polymer accumulation via genetic modification and optimization of culture conditions. An A. adeninivorans strain with overexpressed PHA pathway genes for ß-ketothiolase, acetoacetyl-CoA reductase, PHAs synthase and the phasin gene was able to accumulate an unexpectedly high level of polymer. It was found that an optimized strain cultivated in a shaking incubator is able to produce up to 52.1% of the DCW of PHB-V (10.8 g L-1) with 12.3%mol of PHV fraction. Although further optimization of cultivation conditions in a fed-batch bioreactor led to lower polymer content (15.3% of the DCW of PHB-V), the PHV fraction and total polymer level increased to 23.1%mol and 11.6 g L-1 respectively. Additionally, analysis of the product revealed that the polymer has a very low average molecular mass and unexpected melting and glass transition temperatures. CONCLUSIONS: This study indicates a potential of use for the non-conventional yeast, A. adeninivorans, as an efficient producer of polyhydroxyalkanoates.

A single cell culture system using lectin-conjugated magnetite nanoparticles and magnetic force to screen mutant cyanobacteria.

Cyanobacteria can be utilized as a potential biocatalyst for the production of biofuels and biochemicals directly from CO2. Useful mutants of cyanobacteria, which can grow rapidly or are resistant to specific metabolic products, are essential to improve the productivity of biofuels. In this study, we developed a single cell culture system to effectively screen mutant cyanobacteria using magnetite nanoparticles and magnetic force. Lens culinaris Agglutinin (LCA) was selected as a lectin, which binds to the surface of Synechococcus elongatus PCC7942 cells and the LCA-conjugated magnetite cationic liposomes (MCLs) were developed for magnetic labeling of PCC7942 cells. The MCL-labeled PCC7942 cells were magnetically patterned at a single cell level by using 6,400 iron pillars of the pin-holder device. The device enabled 1,600 single cells to be arrayed in one square centimeter. We cultured the patterned cells in liquid medium and achieved higher colony-forming ratio (78.4%) than that obtained using conventional solid culture method (4.8%). Single cells with different properties could be distinguished in the single cell culture system depending on their growth. Furthermore, we could selectively pick up the target cells and subsequently perform efficient isolation culture. The ratio of successful isolation culture using the developed method was 13 times higher than that of the conventional methods. Thus, the developed system would serve as a powerful tool for screening mutant cyanobacteria.

Prediction of Hepatocellular Carcinoma Development after Hepatitis C Virus Eradication Using Serum Wisteria floribunda Agglutinin-Positive Mac-2-Binding Protein.

We aimed to clarify the association between a novel serum fibrosis marker, Wisteria floribunda agglutinin-positive Mac-2-binding protein (WFA⁺-M2BP), and hepatocellular carcinoma (HCC) development in 355 patients with chronic hepatitis C who achieved sustained virologic response (SVR) through interferon-based antiviral therapy. Pretreatment serum WFA⁺-M2BP levels were quantified and the hazard ratios (HRs) for HCC development were retrospectively analyzed by Cox proportional hazard analysis. During the median follow-up time of 2.9 years, 12 patients developed HCC. Multivariate analysis demonstrated that high serum WFA⁺-M2BP (≥2.80 cut off index (COI), HR = 15.20, p = 0.013) and high fibrosis-4 (FIB-4) index (≥3.7, HR = 5.62, p = 0.034) were independent risk factors for HCC development. The three- and five-year cumulative incidence of HCC in patients with low WFA⁺-M2BP were 0.4% and 0.4%, respectively, whereas those of patients with high WFA⁺-M2BP were 7.7% and 17.6%, respectively (p < 0.001). In addition, combination of serum WFA⁺-M2BP and FIB-4 indices successfully stratified the risk of HCC: the five-year cumulative incidences of HCC were 26.9%, 6.8%, and 0.0% in patients with both, either, and none of these risk factors, respectively (p < 0.001). In conclusion, pretreatment serum WFA⁺-M2BP level is a useful predictor for HCC development after achieving SVR.

Lectin-tagged fluorescent polymeric nanoparticles for targeting of sialic acid on living cells.

In this study, we fabricated lectin-tagged fluorescent polymeric nanoparticles approximately 35 nm in diameter using biocompatible polymers conjugated with lectins for the purpose of detecting sialic acid on a living cell surface, which is one of the most important biomarkers for cancer diagnosis. Through cellular experiments, we successfully detected sialic acid overexpression on cancerous cells with high specificity. These fluorescent polymeric nanoparticles can be useful as a potential bioimaging probe for detecting diseased cells.

Development of a transferable bimolecular fluorescence complementation system for the investigation of interactions between poly(3-hydroxybutyrate) granule-associated proteins in Gram-negative bacteria.

Poly(3-hydroxybutyrate) (PHB) granules are organelle-like multienzyme-polymer complexes (carbonosomes) and are widespread storage compounds in prokaryotes. The interaction of three PHB granule-bound proteins (PHB synthase PhaC1, phasin PhaP5, and PHB/DNA binding protein PhaM) was studied in vivo by bimolecular fluorescence complementation (BiFC) microscopy in Ralstonia eutropha. To this end, a mobilizable 2-plasmid system for arabinose-controlled expression of protein fusions with the N-terminal (YN) and C-terminal (YC) parts of the enhanced yellow fluorescent protein (eYfp) in Gram-negative bacteria was developed. Both plasmids were stably expressed in Escherichia coli and in transconjugants of R. eutropha. Homo-oligomerization of PhaC1, PhaP5, and PhaM and interactions between PhaC1 and PhaM and between PhaM and PhaP5 were detected in R. eutropha and colocalized with PHB granules under PHB-permissive conditions. PhaM-PhaC1 complexes were detected near the midcell/nucleoid region in the absence of PHB. Expression of BiFC complexes in R. eutropha with PhaM (PhaM homo-oligomers or PhaM-PhaC1 or PhaM-PhaP5 complexes) resulted in substantial cell elongation compared to wild-type cells and in BiFC signals that were generally located near the midcell/nucleoid region. Western blot analysis of wild-type cell extracts and proteome analysis of PHB granule-bound proteins revealed that PhaM and PhaP5 are expressed in R. eutropha and that PhaM is constitutively expressed independently of the presence or absence of PHB. Size exclusion chromatography analysis in combination with cross-linking experiments of purified PhaP5-His6 and PhaM-His6 showed that PhaP5 forms dimers and that PhaM is present in oligomeric (dodecamer) form. Implications of this finding for subcellular PHB localization and initiation of PHB granule formation in R. eutropha will be discussed.

Lectin-functionalized poly(glycidyl methacrylate)-block-poly(vinyldimethyl azlactone) surface scaffolds for high avidity microbial capture.

Microbial exopolysaccharides (EPS) play a critical and dynamic role in shaping the interactions between microbial community members and their local environment. The capture of targeted microbes using surface immobilized lectins that recognize specific extracellular oligosaccharide moieties offers a nondestructive method for functional characterization of EPS content. In this report, we evaluate the use of the block copolymer, poly(glycidyl methacrylate)-block-4,4-dimethyl-2-vinylazlactone (PGMA-b-PVDMA), as a surface scaffold for lectin-specific microbial capture. Three-dimensional polymer films were patterned on silicon substrates to provide discrete, covalent coupling sites for Triticum vulgare and Lens culinaris lectins. This material increased the number of Pseudomonas fluorescens microbes captured by up to 43% compared to control scaffolds that did not contain the copolymer. These results demonstrate that PGMA-b-PVDMA scaffolds provide a platform for improved microbe capture and screening of EPS content by combining high avidity lectin surfaces with three-dimensional surface topography.

Enhancement of polyhydroxybutyrate production by introduction of heterologous phasin combination in Escherichia coli.

Phasin is a surface-binding protein of polyhydroxyalkanoate (PHA) granules that is encoded by the phaP gene. As its expression increases, PHA granules become smaller, to increase their surface area, and are densely packed inside the cell, thereby increasing the PHA content. A wide range of PHA-producing bacteria have phaP genes; however, their PHA productivity differs, although they are derived from the cognate bacterial host cell. Modulating phasin expression could be a new strategy to enhance PHA production. This study aimed to characterize the effect of heterologous phasins on the reconstitution of E. coli BL21(DE3) and determine the best synergistic phaP gene combination to produce polyhydroxybutyrate (PHB). We identified novel phasins from a PHB high-producer strain, Halomonas sp. YLGW01, and introduced a combination of phaP genes into Escherichia coli. The resulting E. coli phaP1,3 strain had enhanced PHB production by 2.9-fold, leading to increased cell mass and increased PHB content from 48 % to 65 %. This strain also showed increased tolerance to inhibitors, such as furfural and vanillin, enabling the utilization of lignocellulose biosugar as a carbon source. These results suggested that the combination of phaP1 and phaP3 genes from H. sp. YLGW01 could increase PHB production and robustness.

Accelerated enzymatic galactosylation of N-acetylglucosaminolipids in lipid microdomains.

A fluoro-tagged N-acetylglucosamine-capped glycolipid that can form lipid microdomains in fluid phospholipid bilayers has been shown to be enzymatically galactosylated by bovine ß(1,4)-galactosyltransferase. MALDI MS, HPLC, and LC-MS revealed that the rate of enzymatic transformation was significantly enhanced by lipid clustering; at a 1% mol/mol loading, clustered glycolipids were galactosylated 9-fold faster than glycolipids dispersed across the bilayer surface. The transformation of the GlcNAc "glycocalyx" into a Gal(ß1-4)GlcNAc "glycocalyx" relabeled these vesicles, making them susceptible to agglutination by Erythrina cristagalli lectin (ECL). The kinetic parameters for this transformation revealed a lower apparent Km when the substrate lipids were clustered, which is attributed to multivalent binding to an extended substrate cleft around the active site. These observations may have important implications where soluble enzymes act on substrates embedded within cellular lipid rafts.

Sialic acid and sialyl-lactose glyco-conjugates: design, synthesis and binding assays to lectins and swine influenza H1N1 virus.

The terminal parts of the influenza hemagglutinin (HA) receptors α2,6- and α2,3-sialyllactoses were conjugated to an artificial carrier, named sequential oligopeptide carrier (SOC(4) ), to formulate human and avian receptor mimics, respectively. SOC(4) , formed by the tripeptide unit Lys-Aib-Gly, adopts a rigid helicoids-type conformation, which enables the conjugation of biomolecules to the Lys-N(ε) H(2) groups. By doing so, it preserves their initial conformations and functionalities of the epitopes. We report that SOC(4) -glyco-conjugate bearing two copies of the α2,6-sialyllactose is specifically recognized by the biotinylated Sambucus nigra (elderberry) bark lectin, which binds preferentially to sialic acid in an α2,6-linkage. SOC(4) -glyco-conjugate bearing two copies of the α2,3-sialyllactose was not recognized by the biotinylated Maackia amurensis lectin, despite its well-known α2,3-sialyl bond specificity. However, preliminary immune blot assays showed that H1N1 virus binds to both the SOC(4) -glyco-conjugates immobilized onto nitrocellulose membrane. It is concluded that Ac-SOC(4) [(Ac)(2) ,(3'SL-Aoa)(2) ]-NH(2) 5 and Ac-SOC(4) [(Ac)(2) ,(6'SL-Aoa)(2) ]-NH(2) 6 mimic the HA receptors. These findings could be useful for easy screening of binding and inhibition assays of virus-receptor interactions.

Liposomal glyco-microarray for studying glycolipid-protein interactions.

A microarray enables high-throughput interaction screening of numerous biomolecules; however, fabrication of a microarray composed of cellular membrane components has proven difficult. We report fabrication of a liposomal glyco-microarray by using an azide-reactive liposome that carries synthetic and natural glycolipids via chemically selective and biocompatible liposome immobilization chemistry. Briefly, liposomes carrying anchor lipid dipalmitoylphosphatidylethanolamine (DPPE)-PEG(2000)-triphenylphosphine and ganglioside (GM1 or GM3) were prepared first and were then printed onto an azide-modified glass slide so as to afford a liposomal glyco-microarray via Staudinger ligation. Fluorescent dye release kinetics and fluorescence imaging confirmed successful liposome immobilization and specific protein binding to the intact arrayed glycoliposomes. The liposomal glyco-microarray with different gangliosides showed their specific lectin and toxin binding with different binding affinity. The azide-reactive liposome provides a facile strategy for fabrication of either a natural or a synthetic glycolipid-based membrane-mimetic glycoarray. This liposomal glyco-microarray is simple and broadly applicable and thus will find important biomedical applications, such as studying glycolipid-protein interactions and toxin screening applications.

The specificity of frutalin lectin using biomembrane models.

Frutalin is a homotetrameric alpha-d-galactose (d-Gal)-binding lectin that activates natural killer cells in vitro and promotes leukocyte migration in vivo. Because lectins are potent lymphocyte stimulators, understanding the interactions that occur between them and cell surfaces can help to the action mechanisms involved in this process. In this paper, we present a detailed investigation of the interactions of frutalin with phospho- and glycolipids using Langmuir monolayers as biomembrane models. The results confirm the specificity of frutalin for d-Gal attached to a biomembrane. Adsorption of frutalin was more efficient for the galactose polar head lipids, in contrast to the one for sulfated galactose, in which a lag time is observed, indicating a rearrangement of the monolayer to incorporate the protein. Regarding ganglioside GM1 monolayers, lower quantities of the protein were adsorbed, probably due to the farther apart position of d-galactose from the interface. Binary mixtures containing galactocerebroside revealed small domains formed at high lipid packing in the presence of frutalin, suggesting that lectin induces the clusterization and the forming of domains in vitro, which may be a form of receptor internalization. This is the first experimental evidence of such lectin effect, and it may be useful to understand the mechanism of action of lectins at the molecular level.

Rh-I-UEA-1 polymerized liposomes target and image adenomatous polyps in the APC(Min/+) mouse using optical colonography.

Mutated adenomatous polyposis coli (APC) genes predispose transformations to neoplasia, progressing to colorectal carcinoma. Early detection facilitates clinical management and therapy. Novel lectin-mediated polymerized targeted liposomes (Rh-I-UEA-1), with polyp specificity and incorporated imaging agents were fabricated to locate and image adenomatous polyps in APC(Min/+) mice. The biomarker α-L-fucose covalently joins the liposomal conjugated lectin Ulexeuropaeus agglutinin (UEA-1), via glycosidic linkage to the polyp mucin layer. Multispectral optical imaging (MSI) corroborated a global perspective of specific binding (rhodamine B 532 nm emission, 590-620 nm excitation) of targeted Rh-I-UEA-1 polymerized liposomes to polyps with 1.4-fold labeling efficiency. High-resolution coregistered optical coherence tomography (OCT) and fluorescence molecular imaging (FMI) reveal the spatial correlation of contrast distribution and tissue morphology. Freshly excised APC(Min) bowels were incubated with targeted liposomes (UEA-1 lectin), control liposomes (no lectin), or iohexol (Omnipaque) and imaged by the three techniques. Computed tomographic quantitative analyses did not confirm that targeted liposomes more strongly bound polyps than nontargeted liposomes or iohexol (Omnipaque) alone. OCT, with anatomic depth capabilities, along with the coregistered FMI, substantiated Rh-I-UEA-1 liposome binding along the mucinous polyp surface. UEA-1 lectin denotes α-l-fucose biomarker carbohydrate expression at the mucin glycoprotein layer; Rh-I-UEA-1 polymerized liposomes target and image adenomatous polyps in APC(Min) mice.

Interaction between poly(3-hydroxybutyrate) granule-associated proteins as revealed by two-hybrid analysis and identification of a new phasin in Ralstonia eutropha H16.

A large number of polypeptides are attached to poly(3-hydroxybutyrate) (PHB) granules of Ralstonia eutropha, such as PHB synthase (PhaC1), several PHB depolymerases (PhaZs) and phasins (PhaPs), the regulator protein PhaR(Reu), and possibly others. In this study we used the bacterial adenylate cyclase-based two-hybrid assay to investigate interactions between known PHB granule-associated proteins (PGAPs) and to screen for new PGAPs. The utility of the system was tested by the in vivo verification of previously postulated interactions of the PHB synthase subunits of R. eutropha (PhaC1 homo-oligomerization) and of Bacillus megaterium (PhaC(Bmeg)-PhaR(Bmeg) hetero-oligomerization). Nine proteins (PhaA, PhaB1, PhaC1, PhaP1-PhaP4, PhaZ1 and PhaR), with established functions in PHB metabolism of R. eutropha, were tested for interaction in all combinations. While no significant interaction was detected between the PHB synthase PhaC1 and any of the other eight tested Pha proteins, strong interactions were found between all phasin proteins, in particular between PhaP2 and PhaP4. When PhaP2 was used as bait in a two-hybrid screening experiment with a genomic library of R. eutropha, the B1934 gene product was identified in 24 out of 53 isolated clones. B1934 encodes a hypothetical protein (15.7 kDa) with similarity to phasins of PHB-accumulating bacteria. A fusion protein of eYfp and the B1934 gene product colocalized with PHB granules, confirming that B1934 represents a new phasin (PhaP5). PhaP5 was not essential for PHB granule formation, but overexpression of PhaP5 increased the number of cells with PHB granules at the cell poles.

Fabrication of stents with endothelial function in vitro.

OBJECTIVE: The aim of the study is to fabricate stents with rabbit outgrowth endothelial progenitor cells (OECs) to facilitate their endothelial function in vitro. METHODS: Rabbit OECs were isolated from peripheral blood and identified by immunofluorescence and flow cytometry. Cells proliferation and migration were measured by growth curve and modified Boyden chamber assay. Adhesion assay was performed by replating cells on fibronectin-coated dishes. VEGF, G-CSF and NO in supernatant were tested. OECs were poured on fibronectin-coated or uncoated stents. After six days, scanning electron microscopy (SEM) and inverted fluorescent microscopy observation were performed. RESULTS: About three to four weeks after culture, OECs were characterized as adherent cells which were double positive for Dil-acLDL uptake and FITC-UEA-I binding, with high expression of CD34. They also showed high ability of proliferation, adhesion and migration properties. Compared with uncoated stents, more OECs migrated and adhered onto fibronectin-coated stents. OECs seeding onto the fibronectin coated stents could secret more cytokine and NO. Endothelialization of coated stents was visible both under the SEM and inverted fluorescent microscope. CONCLUSIONS: OECs can differentiate to endothelial lineage and possess high ability of proliferation, migration and adhesion. It is feasible to fabricate OECs-seeded stents in vitro, while the stents coated with fibronectin facilitate this endothelialization process.

"Tuning aggregative versus non-aggregative lectin binding with glycosylated nanoparticles by the nature of the polymer ligand".

Glycan-lectin interactions drive a diverse range of biological signaling and recognition processes. The display of glycans in multivalent format enables their intrinsically weak binding affinity to lectins to be overcome by the cluster glycoside effect, which results in a non-linear increase in binding affinity. As many lectins have multiple binding sites, upon interaction with glycosylated nanomaterials either aggregation or surface binding without aggregation can occur. Depending on the application area, either one of these responses are desirable (or undesirable) but methods to tune the aggregation state, independently from the overall extent/affinity of binding are currently missing. Herein, we use gold nanoparticles decorated with galactose-terminated polymer ligands, obtained by photo-initiated RAFT polymerization to ensure high end-group fidelity, to show the dramatic impact on agglutination behaviour due to the chemistry of the polymer linker. Poly(N-hydroxyethyl acrylamide) (PHEA)-coated gold nanoparticles, a polymer widely used as a non-ionic stabilizer, showed preference for aggregation with lectins compared to poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA)-coated nanoparticles which retained colloidal stability, across a wide range of polymer lengths and particle core sizes. Using biolayer interferometry, it was observed that both coatings gave rise to similar binding affinity and hence provided conclusive evidence that aggregation rate alone cannot be used to measure affinity between nanoparticle systems with different stabilizing linkers. This is significant, as turbidimetry is widely used to demonstrate glycomaterial activity, although this work shows the most aggregating may not be the most avid, when comparing different polymer backbones/coating. Overall, our findings underline the potential of PHPMA as the coating of choice for applications where aggregation upon lectin binding would be problematic, such as in vivo imaging or drug delivery.

Biosynthesis and characterization of 3-hydroxyalkanoate terpolyesters with adjustable properties by Aeromonas hydrophila.

Polyhydroxyalkanoates (PHA) terployesters P(3HB-co-3HV-co-3HHx) consisting of 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyhexanoate (3HHx) were produced by wild-type Aeromonas hydrophila 4AK4, its recombinant harboring PHA synthesis genes phaPCJ encoding PHA binding protein phasin, PHA synthase, and enoyl-CoA hydratase, and another its recombinant harboring phaAB encoding beta-ketothiolase and acetoacetyl-CoA reductase, respectively, when grown in lauric acid and/or valerate. The terpolyesters produced by A. hydrophila 4AK4 (phaAB) grown in velarate were found to produce copolymers P(3HB-co-3HV) containing high 3HV fractions with a maximum of 99 mol% 3HV. In terpolyesters, 3HV ranged from 9 to 32 mol% depending on the valerate concentration and strain used. A maximal terpolyester P(3HB-co-3HV-co-3HHx) content in dry cells was 71 wt%. Transmission electron microscopy study of A. hydrophila 4AK4 harboring phaPCJ revealed the full occupation of terpolyester P(3HB-co-3HV-co-HHx) in the cellular spaces. Terpolyesters with various monomer compositions showed changing thermal and mechanical properties. Those with higher 3HV fractions demonstrated an improved property over the lower HV containing ones.

Selective protein adsorption on polymer patterns formed by self-organization and soft lithography.

Thin films, with both isotropic and ordered patterns of polymer domains, are used as substrates to study selective adsorption of two proteins (concanavalin A and lentil lectin) and to test reconstruction of polymer patterns by these proteins. Integral geometry approach is used to compare quantitatively fluorescence micrographs of protein patches with AFM images of original isotropic patterns, formed during blend casting of polystyrene/poly(methyl methacrylate) and PS/poly(ethylene oxide). Preferential adsorption of both lectins to PMMA phase domains, enhanced for PS/PMMA interfaces is concluded. In turn, protein binding to PS phase regions of PS/PEO blends is highly selective. Ordered protein grouping is obtained as a result of selective adsorption to alternating stripes of polystyrene (partly brominated to enable identification) and cross-linked PEO, prepared with solvent-assisted micromolding applied to PBrS/PEO bilayers. Biological activity test, performed with concanavalin A, confirms preserved functionality of a complementary protein, carboxypeptidase Y, adsorbed to polymer patterns.