Designing a circular carbon and plastics economy for a sustainable future.

The linear production and consumption of plastics today is unsustainable. It creates large amounts of unnecessary and mismanaged waste, pollution and carbon dioxide emissions, undermining global climate targets and the Sustainable Development Goals. This Perspective provides an integrated technological, economic and legal view on how to deliver a circular carbon and plastics economy that minimizes carbon dioxide emissions. Different pathways that maximize recirculation of carbon (dioxide) between plastics waste and feedstocks are outlined, including mechanical, chemical and biological recycling, and those involving the use of biomass and carbon dioxide. Four future scenarios are described, only one of which achieves sufficient greenhouse gas savings in line with global climate targets. Such a bold system change requires 50% reduction in future plastic demand, complete phase-out of fossil-derived plastics, 95% recycling rates of retrievable plastics and use of renewable energy. It is hard to overstate the challenge of achieving this goal. We therefore present a roadmap outlining the scale and timing of the economic and legal interventions that could possibly support this. Assessing the service lifespan and recoverability of plastic products, along with considerations of sufficiency and smart design, can moreover provide design principles to guide future manufacturing, use and disposal of plastics.

Cascade degradation and upcycling of polystyrene waste to high-value chemicals.

Plastic waste represents one of the most urgent environmental challenges facing humankind. Upcycling has been proposed to solve the low profitability and high market sensitivity of known recycling methods. Existing upcycling methods operate under energy-intense conditions and use precious-metal catalysts, but produce low-value oligomers, monomers, and common aromatics. Herein, we report a tandem degradation-upcycling strategy to exploit high-value chemicals from polystyrene (PS) waste with high selectivity. We first degrade PS waste to aromatics using ultraviolet (UV) light and then valorize the intermediate to diphenylmethane. Low-cost AlCl3 catalyzes both the reactions of degradation and upcycling at ambient temperatures under atmospheric pressure. The degraded intermediates can advantageously serve as solvents for processing the solid plastic wastes, forming a self-sustainable circuitry. The low-value-input and high-value-output approach is thus substantially more sustainable and economically viable than conventional thermal processes, which operate at high-temperature, high-pressure conditions and use precious-metal catalysts, but produce low-value oligomers, monomers, and common aromatics. The cascade strategy is resilient to impurities from plastic waste streams and is generalizable to other high-value chemicals (e.g., benzophenone, 1,2-diphenylethane, and 4-phenyl-4-oxo butyric acid). The upcycling to diphenylmethane was tested at 1-kg laboratory scale and attested by industrial-scale techno-economic analysis, demonstrating sustainability and economic viability without government subsidies or tax credits.

Sustainable polymers from renewable resources.

Renewable resources are used increasingly in the production of polymers. In particular, monomers such as carbon dioxide, terpenes, vegetable oils and carbohydrates can be used as feedstocks for the manufacture of a variety of sustainable materials and products, including elastomers, plastics, hydrogels, flexible electronics, resins, engineering polymers and composites. Efficient catalysis is required to produce monomers, to facilitate selective polymerizations and to enable recycling or upcycling of waste materials. There are opportunities to use such sustainable polymers in both high-value areas and in basic applications such as packaging. Life-cycle assessment can be used to quantify the environmental benefits of sustainable polymers.

Tethered Tungsten-Alkylidenes for the Synthesis of Cyclic Polynorbornene via Ring Expansion Metathesis: Unprecedented Stereoselectivity and Trapping of Key Catalytic Intermediates.

This report describes an approach for preparing tethered tungsten-imido alkylidene complexes featuring a tetra-anionic pincer ligand. Treating the tungsten alkylidyne [tBuOCO]W≡CtBu(THF)2 (1) with isocyanates (RNCO; R = tBu, Cy, and Ph) leads to cycloaddition occurring exclusively at the C═N bond to generate the tethered tungsten-imido alkylidenes (6-NR). Unanticipated intermediates reveal themselves, including the discovery of [(O2CtBuC═)W(η2-(N,C)-RNCO)(THF)] (11-R) and an unprecedented decarbonylation product [(tBuOCO)W(≡NR)(tBuCCO)] (14-R), on the pathway to the formation of 6-NR. Complex 11-R is kinetically stable for sterically bulky isocyanate R = tBu (11-tBu) and is isolated and characterized by single-crystal X-ray diffraction. Finally, adding to the short list of catalysts capable of ring expansion metathesis polymerization (REMP), complexes 6-NR and 11-tBu are active for the stereoselective synthesis of cyclic polynorbornene.

Red Light-Emitting Water-Soluble Luminescent Iridium-Containing Polynorbornenes: Synthesis, Characterization and Oxygen Sensing Properties in Biological Tissues In Vivo.

New water-soluble polynorbornenes P1-P4 containing oligoether, amino acid groups and luminophoric complexes of iridium(III) were synthesized by ring-opening metathesis polymerization. The polymeric products in organic solvents and in water demonstrate intense photoluminescence in the red spectral region. The polymers P1 and P3 with 1-phenylisoquinoline cyclometalating ligands in iridium fragments reveal 4-6 fold higher emission quantum yields in solutions than those of P2 and P4 that contain iridium complexes with 1-(thien-2-yl)isoquinoline cyclometalating ligands. The emission parameters of P1-P4 in degassed solutions essentially differ from those in the aerated solutions showing oxygen-dependent quenching of phosphorescence. Biological testing of P1 and P3 demonstrates that the polymers do not penetrate into live cultured cancer cells and normal skin fibroblasts and do not possess cytotoxicity within the concentrations and time ranges reasonable for biological studies. In vivo, the polymers display longer phosphorescence lifetimes in mouse tumors than in muscle, as measured using phosphorescence lifetime imaging (PLIM), which correlates with tumor hypoxia. Therefore, preliminary evaluation of the synthesized polymers shows their suitability for noninvasive in vivo assessments of oxygen levels in biological tissues.

An Efficient Ring-Closure Method for Preparing Well-Defined Cyclic Polynorbornenes.

An efficient bimolecular ring-closure method is developed to prepare the well-defined cyclic polynorbornenes by combining the living ring-opening metathesis polymerization (ROMP) with the self-accelerating double strain-promoted azide-alkyne cycloaddition (DSPAAC) reaction. In this method, ROMP is used to synthesize the well-defined linear polynorbornenes with both azide terminals by virtue of a N-hydroxysuccinimide-ester-functionalized Grubbs initiator following the modification of polymer end groups. DSPAAC click reaction is then used to ring-close the linear polymer precursors and prepare the corresponding well-defined cyclic polynorbornenes using the sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) as small linkers. The self-accelerating DSPAAC ring-closing reaction facilitates this method to efficiently prepare pure cyclic polynorbornenes in the presence of a molar excess of DIBOD small linkers to the linear polynorbornene precursors. This is the first report to prepare well-defined polynorbornenes with cyclic topology based on the ring-closure strategy for cyclic polymers.

Luminescence-Tunable Polynorbornenes for Simultaneous Multicolor Imaging in Subcellular Organelles.

Through modular ROMP (ring-opening metathesis polymerization), biofunctional polynorbornenes are designed and fabricated from panchromatic fluorophores, bioactive peptides, and polyethylene glycol solubilizer for organelle-specific multicolor imaging. Attributed to the free permutation and combination of highly fluorescent red rhodamine B, green dichlorofluorescein and blue 9,10-diphenylanthracene fluorophores as well as signaling peptide sequences of F xrF xK and TAT, we successfully realize simultaneous multicolor imaging toward lysosomes and mitochondria in living cells first utilizing polymeric scaffolds. If more biofunctions could be incorporated, modularly designed copolymer would provide a promising opportunity to facilitate multitasking application to monitoring intracellular alterations and elucidating complex biological processes.

Plantics-GX: a biodegradable and cost-effective thermoset plastic that is 100% plant-based.

We recount here the story of the discovery and invention of a family of thermoset resins that are fully biodegradable and plant-based. The resin is prepared by polymerising glycerol, the simplest trialcohol, with citric acid, the simplest abundantly available triacid. Mixing these two chemicals at moderate temperatures begins a multi-step esterification that results in a network-like resin foam. The hardness, brittleness, and toughness of this resin can be controlled by changing the alcohol : acid ratio, the temperature, and the presence of additives. Remarkably, this resin is fully biodegradable, breaking down to its molecular components in water. The degradation period can be varied from a few days to a few months, depending on the degree of polymerisation. We have prepared over 800 different formulations of this new material, which is now being produced on the ton scale by Plantics BV in The Netherlands under the trade names Glycix and Plantics-GX. This resin is made from inexpensive and widely available starting materials. It is 100% biobased, non-toxic and biodegradable. Thus, it has the potential to replace petro-based thermoset polymers and foams in a variety of real-life applications.

Electronic Interactions of n-Doped Perylene Diimide Groups Appended to Polynorbornene Chains: Implications for Electron Transport in Organic Electronics.

A polymer consisting of a polynorbornene backbone with perylene diimide (PDI) pendant groups on each monomeric unit is synthesized via ring opening metathesis polymerization. The PDI pendant groups along the polymer backbone, studied by UV-vis absorption, fluorescence emission, and electron paramagnetic resonance spectroscopy in addition to electrochemical methods, show evidence of molecular aggregation and corresponding electronic coupling with neighboring groups, which forms pathways for efficient electron transport from one group to another in a specific reduced form. When n-doped, the title polymer shows redox conductivity of 5.4 × 10-3 S cm-1 , comparable with crystalline PDI materials, and is therefore a promising material for use in organic electronics.

2D Sequence-Coded Oligourethane Barcodes for Plastic Materials Labeling.

Mixtures of uniform sequence-defined oligourethanes are evaluated as 2D molecular barcodes for labeling three different commodity polymers, namely polystyrene, polyvinylchloride and polyethylene terephthalate. Six different oligourethanes are synthesized by solid-phase iterative synthesis and are coded using a binary monomer alphabet. High-resolution mass spectrometry studies indicate that all oligomers are uniform and sequence-defined. However, instead of using them as individual coded chains, oligomers with different chain-length, mass and sequence are mixed into intentionally polydispersed libraries. In particular, a three-component library and a four-component library are created to encode a 2-bytes model binary sequence. These 2D-coded libraries are incorporated in all commodity plastics via a simple solvent casting procedure. Furthermore, in all cases, the oligomer mixtures can be extracted from the host polymer films and deciphered by mass spectrometry, thus opening interesting avenues for anti-counterfeiting and traceability applications.

Degradation and metabolism of synthetic plastics and associated products by Pseudomonas sp.: capabilities and challenges.

Synthetic plastics, which are widely present in materials of everyday use, are ubiquitous and slowly-degrading polymers in environmental wastes. Of special interest are the capabilities of microorganisms to accelerate their degradation. Members of the metabolically diverse genus Pseudomonas are of particular interest due to their capabilities to degrade and metabolize synthetic plastics. Pseudomonas species isolated from environmental matrices have been identified to degrade polyethylene, polypropylene, polyvinyl chloride, polystyrene, polyurethane, polyethylene terephthalate, polyethylene succinate, polyethylene glycol and polyvinyl alcohol at varying degrees of efficiency. Here, we present a review of the current knowledge on the factors that control the ability of Pseudomonas sp. to process these different plastic polymers and their by-products. These factors include cell surface attachment within biofilms, catalytic enzymes involved in oxidation or hydrolysis of the plastic polymer, metabolic pathways responsible for uptake and assimilation of plastic fragments and chemical factors that are advantageous or inhibitory to the biodegradation process. We also highlight future research directions required in order to harness fully the capabilities of Pseudomonas sp. in bioremediation strategies towards eliminating plastic wastes.

Plasticizing Effects of Polyamines in Protein-Based Films.

Zeta potential and nanoparticle size were determined on film forming solutions of native and heat-denatured proteins of bitter vetch as a function of pH and of different concentrations of the polyamines spermidine and spermine, both in the absence and presence of the plasticizer glycerol. Our results showed that both polyamines decreased the negative zeta potential of all samples under pH 8.0 as a consequence of their ionic interaction with proteins. At the same time, they enhanced the dimension of nanoparticles under pH 8.0 as a result of macromolecular aggregations. By using native protein solutions, handleable films were obtained only from samples containing either a minimum of 33 mM glycerol or 4 mM spermidine, or both compounds together at lower glycerol concentrations. However, 2 mM spermidine was sufficient to obtain handleable film by using heat-treated samples without glycerol. Conversely, brittle materials were obtained by spermine alone, thus indicating that only spermidine was able to act as an ionic plasticizer. Lastly, both polyamines, mainly spermine, were found able to act as "glycerol-like" plasticizers at concentrations higher than 5 mM under experimental conditions at which their amino groups are undissociated. Our findings open new perspectives in obtaining protein-based films by using aliphatic polycations as components.

Manufacturing and shear response characterization of carbon nanofiber modified CFRP using the out-of-autoclave-vacuum-bag-only cure process.

The interlaminar shear response is studied for carbon nanofiber (CNF) modified out-of-autoclave-vacuum-bag-only (OOA-VBO) carbon fiber reinforced plastic (CFRP). Commercial OOA-VBO prepregs were coated with a CNF modified epoxy solution and a control epoxy solution without CNF to make CNF modified samples and control samples, respectively. Tensile testing was used to study the in-plane shear performance of [± 45°]4s composite laminates. Significant difference in failure modes between the control and CNF modified CFRPs was identified. The control samples experienced half-plane interlaminar delamination, whereas the CNF modified samples experienced a localized failure in the intralaminar region. Digital image correlation (DIC) surface strain results of the control sample showed no further surface strain increase along the delaminated section when the sample was further elongated prior to sample failure. On the other hand, the DIC results of the CNF modified sample showed that the surface strain increased relatively and uniformly across the CFRP as the sample was further elongated until sample failure. The failure mode evidence along with microscope pictures indicated that the CNF modification acted as a beneficial reinforcement inhibiting interlaminar delamination.

Decoloring hemoglobin as a feedstock for second-generation bioplastics.

The color of red blood cell concentrate (RBCC) limits its application in human food, but there is potential to use it for second-generation bioplastics. Several methods have been developed to remove color from RBCC, but they are expensive or may produce difficult-to-remove toxic residues. Hydrogen peroxide treatment is a cheaper alternative. The effects of RBCC concentration, pH, and reaction temperature were the most important factors influencing the decolorizing process. They were investigated with the aim of developing a method that could be scaled to commercial level for producing a bioplastic feedstock. Initial trials showed pH was an important factor for decolorization and foaming. At pH 15 there was a 96% reduction in solution color and 8.4% solids were lost due to foaming. There was a 76% reduction in solution color at pH 2 and only 2.6% solids were lost due to foaming. The optimal reaction conditions were to centrifuge 9% w/w, pH 2 aqueous RBCC solution to remove aggregates. The solution was reacted at 30°C with 7.5 g of 30% (w/w) hydrogen peroxide. These conditions achieved a 93% reduction in solution color after 3 hr and the molecular weight of the decolored protein was not significantly reduced.

Bioplastics from feather quill.

Poultry feather quills have been extruded in a twin screw extruder with sodium sulfite treatment as a reducing agent. The effect of four different plasticizers (ethylene glycol, propylene glycol, glycerol, and diethyl tartrate) on the thermoplastic properties was then investigated. Conformational changes and plasticizer-protein interactions in the extruded resins were assessed by Fourier transform infrared spectroscopy (FTIR), while viscoelastic behavior of the quill keratin plasticized with different plasticizers was investigated by dynamic mechanical analysis (DMA). Differential scanning calorimetry (DSC) was used to determine the effect of different plasticizers on protein denaturation. Thermal degradation patterns of the extrudates were studied by thermogravimetric analysis (TGA). The effect of plasticizers on the mechanical properties of resins was also assessed by tensile strength measurements. Results indicated that ethylene glycol was able to interact more effectively with quill keratin at the molecular level, exhibiting only one sharp glass transition, better mechanical properties, and higher transparency compared to other plasticized resins. The two phases found in glycerol plasticized material were attributed to glycerol-rich and protein-rich zones. Propylene glycol and diethyl tartrate exhibited lower H-bonding interactions and showed wide transition regions in DMA profiles during heating, suggesting weak and heterogeneous interactions between quill keratin and these plasticizers.

Brominated flame retardants (BFRs) in contaminated food contact articles: identification using DART-HRMS and GC-MS.

Any food contact material (FCM) must be approved by the US FDA as being compliant with Title 21 of the Code of Federal regulations Parts 170-199, and/or obtain a non-objection letter through the Food Contact Notification Process, before being placed into the United States market. In the past years, several scientific articles identified FCM or more specifically, food contact articles (FCAs), which were contaminated with brominated flame retardants (BFRs) in the European Union. Prior research has suggested the source of BFR contamination was likely poorly recycled plastics containing waste electrical and electronic equipment (WEEE). We conducted a retail survey to evaluate the presence of BFR-contaminated reusable FCA in the US market. Using a Direct Analysis in Real Time ionisation High-Resolution Mass Spectrometry (DART-HRMS) screening technique and extraction gas chromatography-mass spectrometry (GC-MS) confirmation we were able to identify BFRs present in retail FCAs. Among non-targeted retail samples, 4 of 49 reusable FCAs contained 1-4 BFRs each. The identified BFRs, found in greatest estimated concentrations, were 2,4,6-tribromophenol (TBP), 3,3',5,5'-tetrabromobisphenol A (TBBPA), hexabromocyclododecane (HBCD), decabromodiphenylethane (DBDPE) and decabromodiphenylether (BDE-209). A second targeted FCA sampling (n = 28) confirmed these BFRs persisted in similar articles. Combined sample sets (n = 77) estimated DART false-positive/negative incidences of 5% & 4%, respectively, for BFR screening of FCAs. Because the presence of BFRs in some contaminated FCAs has been demonstrated and since these compounds are possible migrants into food, further studies are warranted. In order to estimate the potential exposure of the identified BFRs and conduct corresponding risk assessments, the next and logical step will be to study the mass transfer of BFRs from the contaminated FCM into food simulants and food.

Hydrophobization of arabinoxylan with n-butyl glycidyl ether yields stretchable thermoplastic materials.

Hemicelluloses are regarded as one of the first candidates for the development of value-added materials due to their renewability, abundance, and functionality. However, because most hemicelluloses are brittle, they can only be processed as a solution and cannot be processed using industrial melt-based polymer processing techniques. In this study, arabinoxylan (AX) was hydrophobized by incorporating butyl glycidyl ether (BuGE) into the hydroxyl groups through the opening of the BuGE epoxide ring, yielding alkoxy alcohols with terminal ethers. The formed BuGE derivatives were melt processable and can be manufactured into stretchable thermoplastic films through compression molding, which has never been done before with hemicellulose modified in a single step. The structural and thermomechanical properties of the one-step synthesis approach were compared to those of a two-step synthesis with a pre-activation step to demonstrate its robustness. The strain at break for the one-step synthesized AX thermoplastic with 3 mol of BuGE is ≈200%. These findings suggest that thermoplastic polymers can be composited with hemicelluloses or that thermoplastic polymers made entirely of hemicelluloses can be designed as packaging and stretchable electronics supports.

Efficient Design to Monitor the Site-specific Sustained Release of a Non-Emissive Anticancer Drug.

A pH-responsive smart nanocarrier with significant components was synthesized by conjugating the non-emissive anticancer drug methyl orange and polyethylene glycol derived folate moiety to the backbone of polynorbornene. Complete synthesis procedure and characterization methods of three monomers included in the work: norbornene-derived Chlorambucil (Monomer 1), norbornene grafted with polyethylene glycol, and folic acid (Monomer 2) and norbornene attached methyl orange (Monomer 3) connected to the norbornene backbone through ester linkage were clearly discussed. Finally, the random copolymer CHO PEG FOL METH was synthesized by ring-opening metathesis polymerization (ROMP) using Grubbs' second-generation catalyst. Advanced polymer chromatography (APC) was used to find the final polymer's molecular weight and polydispersity index (PDI). Dynamic light scattering, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were utilized to explore the prodrug's size and morphology. Release experiments of the anticancer drug, Chlorambucil and the coloring agent, methyl orange, were performed at different pH and time. Cell viability assay was carried out for determining the rate of survived cells, followed by the treatment of our final polymer named CHO PEG FOL METH.