Molybdesum selenide-based platelet-rich plasma containing carboxymethyl chitosan/polyvinyl pyrrolidone composite antioxidant hydrogels dressing promotes the wound healing.

Excess free radicals at the wound site can cause an inflammatory response, which is not conducive to wound healing. Hydrogels with antioxidant properties can prevent inflammatory storms by scavenging free radicals from the wound site and inhibiting the release of inflammatory factors. In this study, we prepared the carboxymethyl chitosan (CMCS)/polyvinyl pyrrolidone (PVP)/Molybdenum (IV) Selenide (MoSe2), and platelet-rich plasma (PRP) (CMCS/PVP/MoSe2/PRP) hydrogels for accelerating the repair of wounds. In the hydrogels, the MoSe2 can scavenge various free radicals to reduce oxidative stress at the site of inflammation, endowed the hydrogels with antioxidant properties. Interestingly, growth factors released by PRP assisted the tissue repair by promoting the formation of new capillaries. CMCS as a backbone not only showed good biocompatibility and biodegradability but also played a significant role in maintaining the sustained release of growth factors. In addition, incorporating PVP enhanced the tissue adhesion and mechanical properties. The multifunctional composite antioxidant hydrogels have good swelling properties and biodegradability, which is completely degraded within 28 days. Thus, the antioxidant CMCS/PVP/MoSe2/PRP hydrogels provide a new idea for designing ideal multifunctional wound dressings.

Mesenchymal stem cells in PRP and PRF containing poly(3-caprolactone)/gelatin Scaffold: a comparative in-vitro study.

Scaffold design is one of the three most essential parts of tissue engineering. Platelet-rich plasma (PRP) and platelet-rich fibrin (PRF) have been used in clinics and regenerative medicine for years. However, the temporal release of their growth factors limits their efficacy in tissue engineering. In the present study, we planned to synthesize nanofibrous scaffolds with the incorporation of PRP and PRF by electrospinning method to evaluate the effect of the release of PRP and PRF growth factors on osteogenic gene expression, calcification, proliferation, and cell adhesion of human bone marrow mesenchymal stem cell (h-BMSC) as they are part of scaffold structures. Therefore, we combined PRP/PRF, derived from the centrifugation of whole blood, with gelatin and Polycaprolactone (PCL) and produced nanofibrous electrospun PCL/Gel/PRP and PCL/Gel/PRF scaffolds. Three groups of scaffolds were fabricated, and h-BMSCs were seeded on them: (1) PCL/Gel; (2) PCL/Gel/PRP; (3) PCL/Gel/PRF. MTS assay was performed to assess cell proliferation and adhesion, and alizarin red staining confirmed the formation of bone minerals during the experiment. The result indicated that PCL/Gel did not have any better outcomes than the PRP and PRF group in any study variants after the first day of the experiment. PCL/gelatin/PRF was more successful regarding cell proliferation and adhesion. Although PCL/gelatin/PRP showed more promising results on the last day of the experiment in mineralization and osteogenic gene expression, except RUNX2, in which the difference with PCL/gelatin/PRF group was not significant.

Tension Stimulation of Tenocytes in Aligned Hyaluronic Acid/Platelet-Rich Plasma-Polycaprolactone Core-Sheath Nanofiber Membrane Scaffold for Tendon Tissue Engineering.

To recreate the in vivo niche for tendon tissue engineering in vitro, the characteristics of tendon tissue underlines the use of biochemical and biophysical cues during tenocyte culture. Herein, we prepare core-sheath nanofibers with polycaprolactone (PCL) sheath for mechanical support and hyaluronic acid (HA)/platelet-rich plasma (PRP) core for growth factor delivery. Three types of core-sheath nanofiber membrane scaffolds (CSNMS), consisting of random HA-PCL nanofibers (Random), random HA/PRP-PCL nanofibers (Random+) or aligned HA/PRP-PCL (Align+) nanofibers, were used to study response of rabbit tenocytes to biochemical (PRP) and biophysical (fiber alignment) stimulation. The core-sheath structures as well as other pertinent properties of CSNMS have been characterized, with Align+ showing the best mechanical properties. The unidirectional growth of tenocytes, as induced by aligned fiber topography, was confirmed from cell morphology and cytoskeleton expression. The combined effects of PRP and fiber alignment in Align+ CSNMS lead to enhanced cell proliferation rates, as well as upregulated gene expression and marker protein synthesis. Another biophysical cue on tenocytes was introduced by dynamic culture of tenocyte-seeded Align+ in a bioreactor with cyclic tension stimulation. Augmented by this biophysical beacon from mechanical loading, dynamic cell culture could shorten the time for tendon maturation in vitro, with improved cell proliferation rates and tenogenic phenotype maintenance, compared to static culture. Therefore, we successfully demonstrate how combined use of biochemical/topographical cues as well as mechanical stimulation could ameliorate cellular response of tenocytes in CSNMS, which can provide a functional in vitro environmental niche for tendon tissue engineering.

Potential of Lyophilized Platelet Concentrates for Craniofacial Tissue Regenerative Therapies.

OBJECTIVE: The use of platelet concentrates (PCs) in oral and maxillofacial surgery, periodontology, and craniofacial surgery has been reported. While PCs provide a rich reservoir of autologous bioactive growth factors for tissue regeneration, their drawbacks include lack of utility for long-term application, low elastic modulus and strength, and limited storage capability. These issues restrict their broader application. This review focuses on the lyophilization of PCs (LPCs) and how this processing approach affects their biological and mechanical properties for application as a bioactive scaffold for craniofacial tissue regeneration. MATERIALS AND METHODS: A comprehensive search of five electronic databases, including Medline, PubMed, EMBASE, Web of Science, and Scopus, was conducted from 1946 until 2019 using a combination of search terms relating to this topic. RESULTS: Ten manuscripts were identified as being relevant. The use of LPCs was mostly studied in in vitro and in vivo craniofacial bone regeneration models. Notably, one clinical study reported the utility of LPCs for guided bone regeneration prior to dental implant placement. CONCLUSIONS: Lyophilization can enhance the inherent characteristics of PCs and extends shelf-life, enable their use in emergency surgery, and improve storage and transportation capabilities. In light of this, further preclinical studies and clinical trials are required, as LPCs offer a potential approach for clinical application in craniofacial tissue regeneration.

Improved osteogenic differentiation of human induced pluripotent stem cells cultured on polyvinylidene fluoride/collagen/platelet-rich plasma composite nanofibers.

Blood transfusion or blood products, such as plasma, have a long history in improving health, but today, platelet-rich plasma (PRP) is used in various medical areas such as surgery, orthopedics, and rheumatology in many ways. Considering the high efficiency of tissue engineering in repairing bone defects, in this study, we investigated the combined effect of nanofibrous scaffolds in combination with PRP on the osteogenic differentiation potential of human induced pluripotent stem cells (iPSCs). Electrospinning was used for fabricating nanofibrous scaffolds by polyvinylidene fluoride/collagen (PVDF/col) with and without PRP. After scaffold characterization, the osteoinductivity of the fabricated scaffolds was studied by culturing human iPSCs under osteogenic medium. The results showed that PRP has a considerable positive effect on the biocompatibility of the PVDF/col nanofibrous scaffold when examined by protein adsorption, cell attachment, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. In addition, the results obtained from alkaline phosphatase activity and calcium content assays demonstrated that nanofibers have higher osteoinductivity while grown on PRP-incorporated PVDF/col nanofibers. These results were also confirmed while the osteogenic differentiation of the iPSCs was more investigated by evaluating the most important bone-related genes expression level. According to the results, it can be concluded that PVDF/col/PRP has much more osteoinductivity while compared with the PVDF/col, and it can be introduced as a promising bone bio-implant for use in bone tissue engineering applications.

Freeze-Drying of Platelet-Rich Plasma: The Quest for Standardization.

The complex biology of platelets and their involvement in tissue repair and inflammation have inspired the development of platelet-rich plasma (PRP) therapies for a broad array of medical needs. However, clinical advances are hampered by the fact that PRP products, doses and treatment protocols are far from being standardized. Freeze-drying PRP (FD-PRP) preserves platelet function, cytokine concentration and functionality, and has been proposed as a consistent method for product standardization and fabrication of an off-the-shelf product with improved stability and readiness for future uses. Here, we present the current state of experimental and clinical FD-PRP research in the different medical areas in which PRP has potential to meet prevailing medical needs. A systematic search, according to PRISMA (Preferred Reported Items for Systematic Reviews and Meta-Analyses) guidelines, showed that research is mostly focused on wound healing, i.e., developing combination products for ulcer management. Injectable hydrogels are investigated for lumbar fusion and knee conditions. In dentistry, combination products permit slow kinetics of growth factor release and functionalized membranes for guided bone regeneration.

Adhesion, integration and osteogenesis of human dental pulp stem cells on biomimetic implant surfaces combined with plasma derived products.

Dental implants are the usual therapy of choice in the dental clinic to replace a loss of natural teeth. Over recent decades there has been an important progress in the design and manufacturing of titanium implant surfaces with the goal of improving their osteointegration. In the present work, the aim was to evaluate the usefulness of hDPSCs (human dental pulp stem cells), in combination with autologous plasma components, for in vitro bone generation on biomimetic titanium dental implant materials. In this context, the combination of hDPSCs stimulated by PRGF or PRF and cultured on standard Ti6A14V and biomimetic BAS™ (Avinent Implant System) titanium surfaces were studied in order to evaluate possible enhancements in the osteoblastic differentiation process out of human mesenchymal cells, as well as bone matrix secretion on the implant surface. The results obtained in this in vitro model of osteogenesis suggested a combination of biomimetic rough titanium surfaces, such as BAS™, with autologous plasma-derived fibrin-clot membranes such as PRF and/or insoluble PRGF formulations, but not with an addition of water-soluble supplements of plasma-derived growth factors, to maximise osteoblastic cell differentiation, bone generation, anchorage and osteointegration of titanium-made dental implants.

Comparative study of electrical and rheological properties of different solutions used in endoscopic mucosal resection.

BACKGROUND AND AIM: The study of electrical and rheological properties of solutions to carry out endoscopic resection procedures could determinate the best candidate. An ex vivo study with porcine stomachs was conducted to analyze electrical resistivity (R) and rheological properties (temperature, viscosity, height and lasting of the cushion) of different substances used in these techniques. METHODS: Tested solutions were: 0.9% saline (S), platelet-rich plasma (PRP), Gliceol (GC), hyaluronic acid 2% (HA), Pluronic-F127 20% (PL), saline with 10% glucose (GS), Gelaspan (GP), Covergel-BiBio (TB) and PRP with TB (PRP+TB). Measurements of electrical and rheological properties were done at 0, 15, 30, 45 and 60 min after submucosal injection. RESULTS: Solutions showed a wide variability of transepithelial R after submucosal injection. Substances able to maintain the highest R 60 min postinjection were TB (7 × 104 Ω), HA (7 × 104 Ω) and PL (7 × 104 Ω). Protective solutions against deep thermal injury (Tª lower than 60°C) were PL (47.6°C), TB (55°C) and HA (56.63°C). Shortest time to carry out resections were observed with GC (17.66″), PRP (20.3″) and GS (23.45″). Solutions with less cushion decrease (<25%) after 60 min were TB (11.74%), PL (18.63%) and PRP (22.12%). CONCLUSIONS: Covergel-BiBio, PL and HA were the best solutions with long-term protective effects (transepithelial R, lower thermal injury and less cushion decrease). Solutions with quicker resection time were GC, PRP and GS.

Evaluating the adhesion of human gingival fibroblasts and MG-63 osteoblast-like cells to activated PRP-coated membranes.

Regeneration of periodontal tissues is affected by the biological and morphological characteristics of the membrane surface. The current study evaluated the adhesion of human gingival fibroblasts (HGF) and MG-63 osteoblast-like cells to Membranes, with and without activated PRP. The line of human gingival fibroblast cells and MG-63 osteoblast-like cells were first prepared and cultured on three types of membranes, including Jason, CenoMembrane and TXT-200 in three groups (FBS 10%, FBS 0.5% and activated PRP). Cell viability was investigated by MTT assay and electron microscopy (SEM) was used to evaluate the cell morphology and adhesion on these membranes after 24 and 72 h. Two-way ANOVA was carried out at the significance level of 0.05. The highest adhesion in the 10% FBS group for HGF and The MG-63 osteoblast-like cells was observed to the Jason membrane during 24 h and 72 h (p < 0.05). However, there were no significant differences among the three membranes in PRP and FBS groups for HGF during 24 h and for MG-63 cells during 72 h (p > 0.05). Activated PRP had a positive effect on the viability and adhesion of both human gingival fibroblasts and osteoblast-like cells as compared to the FBS 0.5% group, but these effects were not as 10% FBS group. The results also showed that Jason membrane had the highest amount of cell viability and adhesion.

Enhanced Rotator-Cuff Repair Using Platelet-Rich Plasma Adsorbed on Branched Poly(ester urea)s.

Platelet-rich plasma (PRP) is a clinically relevant source of growth factors used commonly by surgeons. The clinical efficacy of PRP use as reported in the literature is widely variable which is likely attributed to poorly defined retention time of PRP at the repair site. To overcome this limitation, branched poly(ester urea) (PEU) nanofibers were used to adsorb and retain PRP at the implant site in an acute rotator-cuff tear model in rats. The adsorption of PRP to the branched-PEU 8% material was characterized using quartz crystal microbalance (QCM) and immuno-protein assay. After adsorption of PRP to the nanofiber sheet, the platelets actively released proteins. The adhesion of platelets to the nanofiber material was confirmed by immunofluorescence using a p-selectin antibody. In vivo testing using a rat rotator-cuff repair model compared five groups; no repair (control), suture repair only, repair with disc implant (Disc), repair with PRP-soaked disc (Disc PRP), and a PRP injection (PRP). Mechanical testing at 84 d for the four surgical repair groups resulted in a higher stiffness (11.8 ± 3.8 N/mm, 13.5 ± 3.8 N/mm, 16.8 ± 5.8 N/mm, 12.2 ± 2.6 N/mm, respectively) for the Disc PRP group. Histological staining using trichrome, hematoxylin, and eosin Y (H&E), and safranin O confirmed more collagen organization in the Disc PRP group at 21 and 84 d. Limited inflammation and recovery toward preoperative mechanical properties indicate PEU nanofiber discs as translationally relevant.

Injectable Systems for Intra-Articular Delivery of Mesenchymal Stromal Cells for Cartilage Treatment: A Systematic Review of Preclinical and Clinical Evidence.

Stem cell-based therapy is a promising approach to treat cartilage lesions and clinical benefits have been reported in a number of studies. However, the efficacy of cell injection procedures may be impaired by cell manipulation and damage as well as by cell dissemination to non-target tissues. To overcome such issues, mesenchymal stromal cell (MSC) delivery may be performed using injectable vehicles as containment systems that further provide a favorable cell microenvironment. The aim of this systematic review was to analyze the preclinical and clinical literature on platelet-rich plasma (PRP), hyaluronic acid (HA), and hydrogels for the delivery of MSCs. The systematic literature search was performed using the PubMed and Web of science databases with the following string: "(stem cells injection) AND (platelet rich plasma OR PRP OR platelet concentrate OR biomaterials OR hyaluronic acid OR hydrogels)": 40 studies (19 preclinical and 21 clinical) met the inclusion criteria. This review revealed an increasing interest on the use of injectable agents for MSC delivery. However, while negligible adverse events and promising clinical outcomes were generally reported, the prevalence of low quality studies hinders the possibility to demonstrate the real benefits of using such injectable systems. Specific studies must be designed to clearly demonstrate the added benefits of these systems to deliver MSCs for the treatment of cartilage lesions and osteoarthritis.

Adhesion of Blood Plasma Proteins and Platelet-rich Plasma on l-Valine-Based Poly(ester urea).

The competitive absorption of blood plasma components including fibrinogen (FG), bovine serum albumin (BSA), and platelet-rich plasma (PRP) on l-valine-based poly(ester urea) (PEU) surfaces were investigated. Using four different PEU polymers, possessing compositionally dependent trends in thermal, mechanical, and critical surface tension measurements, water uptake studies were carried out to determine in vitro behavior of the materials. Quartz crystal microbalance (QCM) measurements were used to quantify the adsorption characteristics of PRP onto PEU thin films by coating the surfaces initially with FG or BSA. Pretreatment of the PEU surfaces with FG inhibited the adsorption of PRP and BSA decreased the absorption 4-fold. In vitro studies demonstrated that cells cultured on l-valine-based PEU thin films allowed attachment and spreading of rat aortic cells. These measurements will be critical toward efforts to use this new class of materials in blood-contacting biomaterials applications.

Platelet-Rich Plasma in Grafted Maxillae: Growth Factor Quantification and Dynamic Histomorphometric Evaluation.

PURPOSE: Validation of platelet-rich plasma (PRP) system and assessing its enhancing effect on the healing of iliac crest grafts before implant placement. MATERIALS AND METHODS: Patients randomly allocated to test (n = 13) and control (n = 9) groups. Iliac crest grafts were mixed with PRP in the test group. Tetracycline labeling preceded implant placement. Bone samples were harvested for histomorphometrical analysis. Platelet and growth factor quantifications were performed. ANALYSIS: Data were analyzed using SPSS software package. Independent t test was used and statistical significance was set at 5%. RESULTS: The PRP group showed significantly higher platelet counts, PDGF-BB, and TGF-ß1 concentrations. Tendency to higher volume of woven bone was observed in the PRP group (13 ± 11 vs 4 ± 6, P = 0.1). Histomorphometry showed increased seam separation in the PRP group (8.8 ± 9 µm vs 1.5 ± 3 µm, P = 0.039). Remodeling activity was higher in PRP-woven bone sections and comparable in trabecular sections. CONCLUSION: PRP significantly increased platelet and growth factor concentrations and was of possible enhancing effect on the rate of bone formation at 3 to 4 months of grafting. The clinical significance of this enhancement is yet to be established.

Platelet-Rich Plasma-Loaded Poly(d,l-lactide)-Poly(ethylene glycol)-Poly(d,l-lactide) Hydrogel Dressing Promotes Full-Thickness Skin Wound Healing in a Rodent Model.

Traditional therapeutic methods for skin wounds have many disadvantages, and new wound dressings that can facilitate the healing process are thus urgently needed. Platelet-rich plasma (PRP) contains multiple growth factors (GFs) and shows a significant capacity to heal soft tissue wounds. However, these GFs have a short half-life and deactivate rapidly; we therefore need a sustained delivery system to overcome this shortcoming. In this study, poly(d,l-lactide)-poly(ethylene glycol)-poly(d,l-lactide) (PDLLA-PEG-PDLLA: PLEL) hydrogel was successfully created as delivery vehicle for PRP GFs and was evaluated systematically. PLEL hydrogel was injectable at room temperature and exhibited a smart thermosensitive in situ gel-formation behavior at body temperature. In vitro cell culture showed PRP-loaded PLEL hydrogel (PRP/PLEL) had little cytotoxicity, and promoted EaHy926 proliferation, migration and tube formation; the factor release assay additionally indicated that PLEL realized the controlled release of PRP GFs for as long as 14 days. When employed to treat rodents' full-thickness skin defects, PRP/PLEL showed a significantly better ability to raise the number of both newly formed and mature blood vessels compared to the control, PLEL and PRP groups. Furthermore, the PRP/PLEL-treated group displayed faster wound closure, better reepithelialization and collagen formation. Taken together, PRP/PLEL provides a promising strategy for promoting angiogenesis and skin wound healing, which extends the potential of this dressing for clinical application.

Histological response to platelet-rich plasma added to polypropylene mesh implemented in rabbits.

INTRODUCTION: The platelet-rich plasma (PRP) is part of a set of biotechnologies, providing some growth factors that promote repair of different tissues. The polypropylene meshes (PPM) are applied in the correction of abdominal defects, pelvic floor and urinary incontinence, however, they induce many significant complications, as a result of an inappropriate inflammatory response. PURPOSE: To investigate the changes caused by PRP associated with the implantation of PPM in the abdomen of female rabbits, in the production of collagen I and III and the inflammatory infiltrate (ININ). MATERIALS AND METHODS: We performed implant meshes with and without PRP in adult rabbits (n=30) and euthanasia at 7, 30 and 90 days. Two plates were prepared from each animal and analyzed in five different fields. The ININ was evaluated by quantification of inflammatory cells using hematoxylin-eosin and the collagen by Sirius red method. The results were analyzed applying the Wilcoxon, Kruskal-Wallis, Junckheere and Friedmann tests. RESULTS: There was a significant difference in the number of inflammatory cells between the groups with and without PRP (p=0.01) at 90 days. There was increased production of collagen I, III and total with the use of PRP, at seven days. CONCLUSION: The PPM coating with PRP was associated with increased ININ at the implant area, and an increasing trend during the process of tissue repair. The PPM coated with PRP was related to increased concentration of collagen I, collagen III and the concentration of total collagen increased after seven days of implantation.

Biomedical application of low molecular weight heparin/protamine nano/micro particles as cell- and growth factor-carriers and coating matrix.

Low molecular weight heparin (LMWH)/protamine (P) nano/micro particles (N/MPs) (LMWH/P N/MPs) were applied as carriers for heparin-binding growth factors (GFs) and for adhesive cells including adipose-derived stromal cells (ADSCs) and bone marrow-derived mesenchymal stem cells (BMSCs). A mixture of LMWH and P yields a dispersion of N/MPs (100 nm-3 µm in diameter). LMWH/P N/MPs can be immobilized onto cell surfaces or extracellular matrix, control the release, activate GFs and protect various GFs. Furthermore, LMWH/P N/MPs can also bind to adhesive cell surfaces, inducing cells and LMWH/P N/MPs-aggregate formation. Those aggregates substantially promoted cellular viability, and induced vascularization and fibrous tissue formation in vivo. The LMWH/P N/MPs, in combination with ADSCs or BMSCs, are effective cell-carriers and are potential promising novel therapeutic agents for inducing vascularization and fibrous tissue formation in ischemic disease by transplantation of the ADSCs and LMWH/P N/MPs-aggregates. LMWH/P N/MPs can also bind to tissue culture plates and adsorb exogenous GFs or GFs from those cells. The LMWH/P N/MPs-coated matrix in the presence of GFs may provide novel biomaterials that can control cellular activity such as growth and differentiation. Furthermore, three-dimensional (3D) cultures of cells including ADSCs and BMSCs using plasma-medium gel with LMWH/P N/MPs exhibited efficient cell proliferation. Thus, LMWH/P N/MPs are an adequate carrier both for GFs and for stromal cells such as ADSCs and BMSCs, and are a functional coating matrix for their cultures.

Platelet-rich plasma in orthopedics: Bridging innovation and clinical applications for bone repair.

In the burgeoning domain of orthopedic therapeutic research, Platelet-Rich Plasma (PRP) has firmly established its position, transforming paradigms ranging from tissue regeneration to the management of chondral lesions. This review delves into PRP's recent integrations with cutting-edge interventions such as 3D-printed scaffolds, its role in bone and cartilage defect management, and its enhanced efficacy when combined with molecules like Kartogenin (KGN) for fibrocartilage zone repair. Significant attention is paid to tissue engineering for meniscal interventions, where a combination of KGN, PRP, and bone marrow-derived mesenchymal stem cells are under exploration. Within the sphere of osteochondral regenerative therapy, the synergy of PRP with Bone Marrow Aspirate Concentrate (BMAC) represents a noteworthy leap towards cartilage regeneration. The innovative incorporation of PRP with biomaterials like hydroxyapatite and graphene oxide further underscores its versatility in supporting structural integrity and ensuring sustained growth factor release. However, while PRP's autologous and nontoxic nature makes it an inherently safe option, concerns arising from its preparation methods, particularly with bovine thrombin, necessitate caution. As of 2023, despite the burgeoning promise of PRP in bone healing, the quest for its standardization, optimization, and substantiation through rigorous clinical trials continues. This comprehensive review elucidates the contemporary applications, challenges, and future trajectories of PRP in orthopedics, aiming to spotlight areas primed for further research and exploration.

Platelet-Rich Plasma-Embedded Porous Polycaprolactone Film with a Large Surface Area for Effective Hemostasis.

BACKGROUND: Uncontrollable and widespread bleeding caused by surgery or sudden accidents can lead to death if not treated with appropriate hemostasis. To prevent excessive life-threatening bleeding, various hemostatic agents based on polymeric biomaterials with various additives for accelerated blood coagulation have been adopted in clinical fields. In particular, platelet-rich plasma (PRP), which contains many blood coagulation factors that can accelerate blood clot formation, is considered as one of the most effective hemostatic additives. METHODS: We investigated a PRP-embedded porous film using discarded (expired) PRP and a film with a leaf-stacked structure (FLSS), as a hemostatic agent to induce rapid hemostasis. The film, which contained an LSS on one side (PCL-FLSS), was fabricated by a simple heating-cooling technique using tetraglycol and polycaprolactone (PCL) film. Activated PRP was obtained by the thawing of frozen PRP at the end of its expiration date (the platelet cell membrane is disrupted during the freezing and thawing of PRP, thus releasing various coagulation factors) and embedded in the PCL-FLSS (PRP-FLSS). RESULTS: From in vitro and in vivo experiments using a rat hepatic bleeding model, it was recognized that PRP-FLSS is not only biocompatible but also significantly accelerates blood clotting and thus prevents rapid bleeding, probably due to a synergistic effect of the sufficient supply of various blood coagulants from activated PRP embedded in the LSS layer and the large surface area of the LSS itself. CONCLUSION: The study suggests that PRP-FLSS, a combination of a porous polymer matrix with a unique morphology and discarded biofunctional resources, can be an advanced hemostatic agent as well as an upcycling platform to avoid the waste of biofunctional resources.

Engineered Regenerative and Adhesive Hydrogel for Concurrent Sealing and Healing of Enterocutaneous Fistulas.

In addressing the intricate challenges of enterocutaneous fistula (ECF) treatment, such as internal bleeding, effluent leakage, inflammation, and infection, our research is dedicated to introducing a regenerative adhesive hydrogel that can seal and expedite the healing process. A double syringe setup was utilized, with dopagelatin and platelet-rich plasma (PRP) in one syringe and Laponite and sodium periodate in another. The hydrogel begins to cross-link immediately after passing through a mixing tip and exhibits tissue adhesive properties. Results demonstrated that PRP deposits within the pores of the cross-linked hydrogel and releases sustainably, enhancing its regenerative capabilities. The addition of PRP further improved the mechanical properties and slowed down the degradation of the hydrogel. Furthermore, the hydrogel demonstrated cytocompatibility, hemostatic properties, and time-dependent macrophage M1 to M2 phase transition, suggesting the anti-inflammatory response of the material. In an in vitro bench test simulating high-pressure fistula conditions, the hydrogel effectively occluded pressures up to 300 mmHg. In conclusion, this innovative hydrogel holds promise for ECF treatment and diverse fistula cases, marking a significant advancement in its therapeutic approaches.

Injectable, stable, and biodegradable hydrogel with platelet-rich plasma induced by l-serine and sodium alginate for effective treatment of intrauterine adhesions.

The combination of pharmacological and physical barrier therapy is a highly promising strategy for treating intrauterine adhesions (IUAs), but there lacks a suitable scaffold that integrates good injectability, proper mechanical stability and degradability, excellent biocompatibility, and non-toxic, non-rejection therapeutic agents. To address this, a novel injectable, degradable hydrogel composed of poly(ethylene glycol) diacrylate (PEGDA), sodium alginate (SA), and l-serine, and loaded with platelet-rich plasma (PRP) (referred to as PSL-PRP) is developed for treating IUAs. l-Serine induces rapid gelation within 1 min and enhances the mechanical properties of the hydrogel, while degradable SA provides the hydrogel with strength, toughness, and appropriate degradation capabilities. As a result, the hydrogel exhibits an excellent scaffold for sustained release of growth factors in PRP and serves as an effective physical barrier. In vivo testing using a rat model of IUAs demonstrates that in situ injection of the PSL-PRP hydrogel significantly reduces fibrosis and promotes endometrial regeneration, ultimately leading to fertility restoration. The combined advantages make the PSL-PRP hydrogel very promising in IUAs therapy and in preventing adhesions in other internal tissue wounds.