Reversible pH-Gated MXene Membranes with Ultrahigh Mono-/Divalent-Ion Selectivity.

Artificial ion channel membranes hold high promise in water treatment, nanofluidics, and energy conversion, but it remains a great challenge to construct such smart membranes with both reversible ion-gating capability and desirable ion selectivity. Herein, we constructed a smart MXene-based membrane via p-phenylenediamine functionalization (MLM-PPD) with highly stable and aligned two-dimensional subnanochannels, which exhibits reversible ion-gating capability and ultrahigh metal ion selectivity similar to biological ion channels. The pH-sensitive groups within the MLM-PPD channel confers excellent reversible Mg2+-gating capability with a pH-switching ratio of up to 100. The mono/divalent metal-ion selectivity up to 1243.8 and 400.9 for K+/Mg2+ and Li+/Mg2+, respectively, outperforms other reported membranes. Theoretical calculations combined with experimental results reveal that the steric hindrance and stronger PPD-ion interactions substantially enhance the energy barrier for divalent metal ions passing through the MLM-PPD, and thus leading to ultrahigh mono/divalent metal-ion selectivity. This work provides a new strategy for developing artificial-ion channel membranes with both reversible ion-gating functionality and high-ion selectivity for various applications.

Stimulated Raman Scattering Microscopy Reveals Bioaccumulation of Small Microplastics in Protozoa from Natural Waters.

Microplastics (MPs) are pollutants of global concern, and bioaccumulation determines their biological effects. Although microorganisms form a large fraction of our ecosystem's biomass and are important in biogeochemical cycling, their accumulation of MPs has never been confirmed in natural waters because current tools for field biological samples can detect only MPs > 10 µm. Here, we show that stimulated Raman scattering microscopy (SRS) can image and quantify the bioaccumulation of small MPs (<10 µm) in protozoa. Our label-free method, which differentiates MPs by their SRS spectra, detects individual and mixtures of different MPs (e.g., polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, polystyrene, and poly(methyl methacrylate)) in protozoa. The ability of SRS to quantify cellular MP accumulation is similar to that of flow cytometry, a fluorescence-based method commonly used to determine cellular MP accumulation. Moreover, we discovered that protozoa in water samples from Yangtze River, Xianlin Wastewater Treatment Plant, Lake Taihu and the Pearl River Estuary accumulated MPs < 10 µm, but the proportion of MP-containing cells was low (∼2-5%). Our findings suggest that small MPs could potentially enter the food chain and transfer to organisms at higher trophic levels, posing environmental and health risks that deserve closer scrutiny.

Unexpected Favorable Role of Ca2+ in Phosphate Removal by Using Nanosized Ferric Oxides Confined in Porous Polystyrene Beads.

Polystyrene-based nanoferric oxide composite is a representative nanomaterial successfully applied in scale-up water decontamination for arsenic and phosphorus. However, little is available on the effect of solution chemistry (for instance, the coexisting Ca2+) on the long-term performance of the nanocomposite. In this study, we carried out 20 cyclic runs of phosphate adsorption-desorption on a polymer-supported ferric nanocomposite HFO@201. Unexpectedly, an enhanced phosphate removal was observed in the presence of Ca2+, which is quite different from its adverse effect on phosphate capture by granular ferric oxide. Further mechanistic studies revealed that enhanced phosphate removal was mainly realized via the Ca-P coprecipitation inside the networking pores of HFO@201 as well as the possible formation of the multiple Fe-P-Ca-P complex. The complex formation led to a distinct increase in P adsorption, and the coprecipitation, driven by the accumulated OH- in confined pores during phosphate adsorption and alkaline regeneration, favored P removal via the formation of amorphous calcium phosphate (ACP) and hydroxyapatite inside. TEM-EDS spectra indicated that coprecipitation did not occur on the surface of loaded nano-HFO, greatly mitigating its adverse effect on P adsorption on the surface of nano-HFO. Fixed-bed column study showed that the presence of Ca2+ increased the effective treatable volume of HFO@201 toward P-containing influents by ∼70%. This study is believed to shed new insights into the effect of solution chemistry on similar nanocomposites for advanced water treatment.

Adsorption and Reduction of Cr(VI) Together with Cr(III) Sequestration by Polyaniline Confined in Pores of Polystyrene Beads.

The simultaneous reduction and sequestration of Cr(VI) from wastewater is desirable as a cost-effective and environmentally friendly approach. In this study, we execute a one-step facile synthesis strategy on polyaniline (PANI) composites based on aniline adsorption and polymerization on pores of millimeter-scale polystyrene balls (PANI@PS). The well-defined PANI@PS increased the removal capacity of Cr(VI) by 5.4 times, going from 43.6 (bulky PANI) to 233.7 mg g-1 near neutral pH (6.0) instead of the pH 1-3 documented in other reports, which was higher than that of many reported adsorbents due to its porous structure, numerous interaction sites, and confinement effects in the polymer. Most importantly, PANI@PS could efficiently sequester positive Cr(III) after reducing Cr(VI) to Cr(III) due to its negative surface created by confinement effects confined to the nanopores of PS. Conversely, positively charged bulky PANI repelled electrostatically positive Cr(III); thus, additional precipitation or adsorption treatments were needed in practical applications. Moreover, a coating of PANI can protect PS, as a substrate and a composite, from irreversible damage due to the strong oxidation capacity of Cr(VI), which is another major concern in adsorbing strong oxidants using polymers. A novel strategy to regenerate the exhausted PANI@PS was efficiently executed based on the electrochemical redox reversibility of PANI. Finally, the comprehensive adsorption/reduction/sequestration of Cr on PANI@PS was elucidated in detail.

A human cell panel for evaluating safe application of nano-ZrO2/polymer composite in water remediation.

Nanomaterials, such as ZrO2 nanoparticles (ZrO2 NPs), are very effective in water remediation. However, the safety issues related to nanoparticle release and toxicity to humans remain to be resolved. Here we evaluated the cytotoxicity of ZrO2 NPs and their adducts with pollutants using a human cell panel containing stomach, intestine, liver and kidney cells. We found that different pollutants or ZrO2NP/pollutant adducts targeted cells from different organs, suggesting the necessity of a cell panel to model oral exposures. The cooperation of ZrO2 NPs and pollutants was quite complex, consisting of synergistic, antagonistic, or additive effects. For example, ZrO2 NPs enhanced the cytotoxicity of Pb2+ in GES-1 cells and of Pb2+, Cd2+ in FHC cells, while alleviating the toxicity of Pb2+ and As (III) in HepG2 and Hek293 cells. Our results also indicated that even concentrations of pollutants that meet the national standard, the ZrO2 NPs concentration should be kept below 17 µg/mL to avoid ZrO2 NP/pollutant adduct synergistic toxicity.

Simultaneous Oxidation and Sequestration of As(III) from Water by Using Redox Polymer-Based Fe(III) Oxide Nanocomposite.

Water decontamination from As(III) is an urgent but still challenging task. Herein, we fabricated a bifunctional nanocomposite HFO@PS-Cl for highly efficient removal of As(III), with active chlorine covalently binding spherical polystyrene host for in situ oxidation of As(III) to As(V), and Fe(III) hydroxide (HFO) nanoparticles (NPs) embedded inside for specific As(V) removal. HFO@PS-Cl could work effectively in a wide pH range (5-9), and other substances like sulfate, chloride, bicarbonate, silicate, and humic acid exert insignificant effect on As(III) removal. As(III) sequestration is realized via two pathways, that is, oxidation to As(V) by the active chlorine followed by specific As(V) adsorption onto HFO NPs, and As(III) adsorption onto HFO NPs followed by oxidation to As(V). The exhausted HFO@PS-Cl could be refreshed for cyclic runs with insignificant capacity loss by the combined regeneration strategy, that is, alkaline solution to rinse the adsorbed As(V) and NaClO solution to renew the host oxidation capability. In addition, fixed-bed experiments demonstrated that the HFO@PS-Cl column could generate >1760 bed volume (BV) effluent from a synthetic As(III)-containing groundwater to meet the drinking water standard (<10 µg As/L), whereas other two HFO nanocomposites, HFO@PS-N and HFO@D201 could only generate 450 and 600 BV effluents under otherwise identical conditions.

Highly Efficient Water Decontamination by Using Sub-10 nm FeOOH Confined within Millimeter-Sized Mesoporous Polystyrene Beads.

Millimeter-sized polymer-based FeOOH nanoparticles (NPs) provide a promising option to overcome the bottlenecks of direct use of NPs in scaled-up water purification, and decreasing the NP size below 10 nm is expected to improve the decontamination efficiency of the polymeric nanocomposites due to the size and surface effect. However, it is still challenging to control the dwelled FeOOH NP sizes to sub-10 nm, mainly due to the wide pore size distribution of the currently available polymeric hosts. Herein, we synthesized mesoporous polystyrene beads (MesoPS) via flash freezing to assemble FeOOH NPs. The embedded NPs feature with α-crystal form, tunable size ranging from 7.3 to 2.0 nm and narrow size distribution. Adsorption of As(III/V) by the resultant nanocomposites was greatly enhanced over the α-FeOOH NPs of 18 × 60 nm, with the iron mass normalized capacity of As(V) increasing to 10.3 to 14.8 fold over the bulky NPs. Higher density of the surface hydroxyl groups of the embedded NPs as well as their stronger affinity toward As(V) was proved to contribute to such favorable effect. Additionally, the as-obtained nanocomposites could be efficiently regenerated for cyclic runs. We believe this study will shed new light on how to fabricate highly efficient nanocomposites for water decontamination.

Fabrication of Novel Magnetic Nanoparticles of Multifunctionality for Water Decontamination.

Efficient and powerful water purifiers are in increasing need because we are facing a more and more serious problem of water pollution. Here, we demonstrate the design of versatile magnetic nanoadsorbents (M-QAC) that exhibit excellent disinfection and adsorption performances at the same time. The M-QAC is constructed by a Fe3O4 core surrounded by a polyethylenimine-derived corona. When dispersed in water, the M-QAC particles are able to interact simultaneously with multiple contaminants, including pathogens and heavy metallic cations and anions, in minutes. Subsequently, the M-QACs along with those contaminants can be easily removed and recollected by using a magnet. Meanwhile, the mechanisms of disinfection are investigated by using TEM and SEM, and the adsorption mechanisms are analyzed by XPS. In a practical application, M-QACs are applied to polluted river water 8000-fold greater in mass, producing clean water with the concentrations of all major pollutants below the drinking water standard of China. The adsorption ability of M-QAC could be regenerated for continuous use in a facile manner. With more virtues, such as low-cost fabrication and easy scaling up, the M-QAC have been shown to be a very promising multifunctional water purifier with rational design and to have great potential for real water purification applications.

Enhanced Phosphate Removal by Nanosized Hydrated La(III) Oxide Confined in Cross-linked Polystyrene Networks.

A new nanocomposite adsorbent La-201 of extremely high capacity and specific affinity toward phosphate was fabricated and well characterized, where hydrated La(III) oxide (HLO) nanoclusters were immobilized inside the networking pores of the polystyrene anion exchanger D-201. La-201 exhibited enhanced phosphate adsorption in the presence of competing anions (chloride, sulfate, nitrate, bicarbonate, and silicate) at greater levels (up to molar ratio of 20), with working capacity 2-4 times higher than a commercial Fe(III) oxide-based nanocomposite HFO-201 in batch runs. Column adsorption runs by using La-201 could effectively treat ∼6500 bed volumes (BV) of a synthetic feeding solution before breakthrough occurred (from 2.5 mg P/L in influent to <0.5 mg P/L in effluent), approximately 11 times higher magnitude than that of HFO-201. The exhausted La-201 could be regenerated with NaOH-NaCl binary solution at 60 °C for repeated use without any significant capacity loss. The underlying mechanism for the specific sorption of phosphate by La-201 was revealed with the aid of STEM-EDS, XPS, XRD, and SSNMR analysis, and the formation of LaPO4·xH2O is verified to be the dominant pathway for selective phosphate adsorption by the immobilized nano-HLO. The results indicated that La-201 was very promising in highly efficient removal of phosphate from contaminated waters.

Sorption enhancement of lead ions from water by surface charged polystyrene-supported nano-zirconium oxide composites.

A novel hybrid nanomaterial was fabricated by encapsulating ZrO2 nanoparticles into spherical polystyrene beads (MPS) covalently bound with charged sulfonate groups (-SO3(-)). The resultant adsorbent, Zr-MPS, exhibited more preferential sorption toward Pb(II) than the simple equivalent mixture of MPS and ZrO2. Such observation might be ascribed to the presence of sulfonate groups of the polymeric host, which could enhance nano-ZrO2 dispersion and Pb(II) diffusion kinetics. To further elucidate the role of surface functional groups, we encapsulated nano-ZrO2 onto another two macroporous polystyrene with different surface groups (i.e., -N(CH3)3(+)/-CH2Cl, respectively) and a conventional activated carbon. The three obtained nanocomposites were denoted as Zr-MPN, Zr-MPC, and Zr-GAC. The presence of -SO3(-) and -N(CH3)3(+) was more favorable for nano-ZrO2 dispersion than the neutral -CH2Cl, resulting in the sequence of sorption capacities as Zr-MPS > Zr-MPN > Zr-GAC > Zr-MPC. Column Pb(II) sorption by the four nanocomposites further demonstrated the excellent Pb(II) retention by Zr-MPS. Comparatively, Zr-MPN of well-dispersed nano-ZrO2 and high sorption capacities showed much faster breakthrough for Pb(II) sequestration than Zr-MPS, because the electrostatic repulsion of surface quaternary ammonium group of MPN and Pb(II) ion would result in a poor sorption kinetics. This study suggests that charged groups in the host resins improve the dispersion of embedded nanoparticles and enhance the reactivity and capacity for sorption of metal ions. Suitably charged functional groups in the hosts are crucial in the fabrication of efficient nanocomposites for the decontamination of water from toxic metals and other charged pollutants.

Application potential of carbon nanotubes in water treatment: A review.

Water treatment is the key to coping with the conflict between people's increasing demand for water and the world-wide water shortage. Owing to their unique and tunable structural, physical, and chemical properties, carbon nanotubes (CNTs) have exhibited great potentials in water treatment. This review makes an attempt to provide an overview of potential solutions to various environmental challenges by using CNTs as adsorbents, catalysts or catalyst support, membranes, and electrodes. The merits of incorporating CNT to conventional water-treatment material are emphasized, and the remaining challenges are discussed.

Robust polystyrene resin-supported nano-CoFe2O4 mediated peroxymonosulfate activation for efficient oxidation of 1-hydroxyethane 1,1-diphosphonic acid.

Nanosized spinel cobalt ferrite (CoFe2O4) shows high performance in peroxymonosulfate (PMS) activation for decontamination in water, but is yet challenged by the easily leached Co(II) with high toxicity. Herein, macroporous polystyrene resin is used as the support to improve the stability of CoFe2O4 nanoparticles during PMS activation. CoFe2O4@S201 exerted high catalytic activity toward PMS activation for oxidation of 1-hydroxyethane 1,1-diphosphonic acid (HEDP), with the apparent rate normalized by Co content 38.2 times higher than that of the unsupported CoFe2O4. Meanwhile, one order of magnitude lower Co leaching (< 2.1 µg L-1) was detected during the catalytic oxidation. The Co(II)-PMS complex was the primary oxidant responsible for the oxidation of HEDP. The catalytic durability and stability of CoFe2O4@S201 for degradation of HEDP in actual wastewater were systematically evaluated in both batch and continuous-flow mode. It is found that the organic resin, which is often considered to be intolerant to oxidation, is rather stable during the non-radical process. The total cobalt leaching of the fresh CoFe2O4@S201 cannot be ignored in the 100-h continuous-flow run. In contrast, much lower cobalt leaching and slightly higher oxidation efficiency were observed for the regenerated CoFe2O4@S201, which might be due to the removal of unreactive and unstable Co sites on the surface in the first trial. The findings shed light on the potential of organic supports for improving the stability and activity of nanosized CoFe2O4 and other nano-catalysts toward practical application.

Methane Production by Facultative Anaerobic Wood-Rot Fungi via a New Halomethane-Dependent Pathway.

The greenhouse gas methane (CH4) is of pivotal importance for Earth's climate system and as a human energy source. A significant fraction of this CH4 is produced by anaerobic Archaea. Here, we describe the first CH4 production by facultative anaerobic wood-rot fungi during growth on hydroxylated/carboxylated aromatic compounds, including lignin and lignite. The amount of CH4 produced by fungi is positively correlated with the amount of CH3Cl produced during the rapid growth period of the fungus. Biochemical, genetic, and stable isotopic tracer analyses reveal the existence of a novel halomethane-dependent fungal CH4 production pathway during the degradation of phenol and benzoic acid monomers and polymers and utilization of cyclic sugars. Even though this halomethane-dependent pathway may only play a side role in anaerobic fungal activity, it could represent a globally significant, previously overlooked source of biogenic CH4 in natural ecosystems. IMPORTANCE Here, we demonstrate that wood-rot fungi produce methane anaerobically without the involvement of methanogenic archaea via a new, halomethane-dependent pathway. These findings of an anaerobic fungal methane formation pathway open another avenue in methane research and will further assist with current efforts in the identification of the processes involved and their ecological implications.

Treatment of aqueous diethyl phthalate by adsorption using a functional polymer resin.

To study the adsorptive separation efficiency, adsorption and desorption performances of diethyl phthalate (DEP) were investigated with a functional polymer resin (NDA-702). A macroporous polymer resin (XAD-4) and a coal-based granular activated carbon (AC-750) were chosen for comparison. The kinetic adsorption data obeyed the pseudo-second-order rate model, and the adsorption processes were limited by both film and intraparticle diffusions. Adsorption equilibrium data were well fitted by the Freundlich equation, and the larger uptake and higher selection of NDA-702 than AC-750 and XAD-4 was probably due to the microporous structure, phenyl rings and polar groups on NDA-702. Thermodynamic adsorption studies indicated that the test adsorbents spontaneously adsorbed DEP, driven mainly by enthalpy change. Continuous fixed-bed runs demonstrated that there no significant loss of the resin's adsorption capacity and there was complete regeneration of NDA-702. The results suggest that NDA-702 has excellent potential as an adsorption material for water treatment.

Utilization of gel-type polystyrene host for immobilization of nano-sized hydrated zirconium oxides: A new strategy for enhanced phosphate removal.

The urgent need for eutrophication control motivated the development of many novel adsorbents for enhanced phosphate polishing removal. Among these, zirconium-based nanomaterial was regarded as an effective kind because of its ability to bind phosphate specifically via inner-sphere complexation. In this study, we proposed a new strategy to improve the efficiency of zirconium oxides (HZO) nanoparticles by immobilizing them onto a gel-type anion exchange resin covalently attached with ammonium groups, denoted as HZO@N201. A previously developed macro-porous polymeric nanocomposite HZO@D201 was used for comparison. The immobilized nanoparticles in HZO@N201 were well dispersed in the gel matrix, manifesting smaller particle size and richer surface hydroxyl groups in comparison to HZO@D201. As a result of the structural merits in collective, HZO@N201 not only exhibited superior phosphate adsorptive capacity and affinity towards phosphate to HZO@D201, but also facilitate phosphate diffusion, based on isotherm, pH and kinetic tests. Mechanistic study by XPS and 31P SS-NMR substantiated the selective phosphate adsorption pathway as the formation of inner-sphere complexes by HZO@N201, which exhibited enhanced reactivity than HZO@D201. Lastly, fixed-bed runs of HZO@N201 was conducted, achieving an effective treatable volume of 2000 BV, which was 600 BV more than HZO@D201. Additional adsorption-regeneration cycle confirmed its reusability and potential for practical application. We believe the gel-type polymeric host could facilitate the formation and dispersion of smaller sized nanoparticles, exposing more surface hydroxyl groups highly accessible to phosphate. The results of this paper offer insights to a new strategy for immobilization of functional nanoparticles aiming at enhanced adsorptive removal of phosphate.

Enhanced Arsenite Removal from Silicate-containing Water by Using Redox Polymer-based Fe(III) Oxides Nanocomposite.

The efficient removal of arsenite [As(III)] from groundwater remains a great challenge. Nanoscale oxides of Fe(III), Zr(IV), and Al(III) can selectively remove arsenic from groundwater through inner-sphere complexation. However, owing to polysilicate coatings formation on nanoparticles surface, the ubiquitous silicate exerts remarkably adverse effects on As(III) removal. Herein, we propose a new strategy to enhance silicate resistance of nanoscale oxides by embedding them inside the redox polymer host. As a proof-of-concept, the nanocomposite HFO@PS-Cl was employed to remove As(III) from silicate-containing water. The polymer host (PS-Cl) contains active chlorine to oxidize As(III) into arsenate [As(V)], and the embedded Fe(III) oxides enabling specific adsorption toward arsenic. Silicate exerts negligible effects on As(III) removal by HFO@PS-Cl in pH 3-7, but increasing the residual arsenic concentration from 49 µg/L to 166 µg/L for the solutions treated by HFO@PS-N, i.e., the nanoscale Fe(III) oxides embedded inside the polymer host without active chlorine. During the six cyclic decontamination-regeneration assays, HFO@PS-Cl steadily reduces As(III) below 10 µg/L. As for HFO@PS-N, however, the residual arsenic increases to ~57 µg/L in the sixth run. In column mode, HFO@PS-Cl column generates >3200-bed volume (BV) clean water ([As]<10 µg/L) from the simulated As(III)-contaminated groundwater. In contrast, the values for As(V)-contaminated water and HFO@PS-N column are only ~650 BV and ~608 BV, respectively. The stoichiometric assays, XPS, and in-situ ATR-FTIR analysis demonstrate that silicate polymerization is intensively suppressed by the protons produced during As(III) oxidation, thus rendering HFO@PS-Cl with excellent silicate resistant properties.

Adsorptive selenite removal from water using a nano-hydrated ferric oxides (HFOs)/polymer hybrid adsorbent.

Selenite (SeO(3)(2-)) is an oxyanion of environmental significance due to its toxicity when taken in excess. In the present study, a hybrid adsorbent (HFO-201) was prepared by irreversibly impregnating hydrated ferric oxide (HFO) nanoparticles within a commercial available anion-exchange resin (D-201), and its adsorption towards selenite from water was investigated in batch and column tests. HFO-201 exhibited improved sorption selectivity toward selenite as compared to the polymeric anion exchanger D-201. Two possible adsorption interactions were responsible for selenite removal by HFO-201, the electrostatic interaction from the ammonium groups bound to the D-201 matrix, and the formation of inner-sphere complexes between the loaded HFO nanoparticles and selenite. In a wide pH range (i.e., 3-8), increasing solution pH was found to result in a decrease of selenite removal on HFO-201. Adsorption isotherms fit the Freundlich model well, and selenite adsorption increased with increasing ambient temperature, indicating its endothermic nature. Column adsorption tests suggested that satisfactory removal of selenite from 2 mg/L to less than 0.01 mg/L could be achieved by HFO-201 even in the presence of the commonly encountered anionic competition at greater concentration, with the treatment capacity of approximately 1200 bed volume (BV) per run, while that for D-201 was only less than 30 BV under otherwise identical conditions. Furthermore, the exhausted HFO-201 was amenable to efficient in situ regeneration with a binary NaOH-NaCl solution.

Removal of model dyes on charged UF membranes: Experiment and simulation.

Charged ultrafiltration (UF) membranes can repel electrically charged molecules that are smaller than the size of the membrane pores and display high rejection of solutes, high flux, and low operation pressures compared to uncharged UF, nanofiltration (NF) and reverse osmosis (RO). Here, a charged UF membrane composite (PANI/PVDF) was prepared and regulated via electrochemically reversible control in portions of amine/imine functional groups of PANI. As a result, the permeability and rejection ratios of CR2- on charged PANI/PVDF, with PVDF as a control, increased from 19.6 to a maximum of 183.3 L m-2 h-1 bar-1 and from 3.4% to 74%, which expands the trade-off confine benefited from surface potential change from -12.21 mV to -25.26 mV, furtherly, the rejection ratio of CR2- on PANI/PVDF reached up to 93% via the electrochemical regulation. Finally, a fixed-charge model was built that well describes the steric and electric repulsion effects on membrane performance and the important roles of the electrochemically controllable surface charge. Moreover, the contour map of rejection ratios containing the ratio of molecular size vs the average pore size of the membrane (r/R = 0.2-1.0) and the zeta potential (-10 to -60 mV) were taken into account, which can be used to visually understand the rejection performance of membranes. This model is also appropriate for varying molecular sizes and for molecules with different charges. Our work opens a new horizon for the design of electrochemically controllable charged membranes to remove charged compounds.

Sorption enhancement of 1-naphthol onto a hydrophilic hyper-cross-linked polymer resin.

A hydrophilic hyper-cross-linked polymer resin NDA-150 was developed to remove 1-naphthol from the contaminated waters. The sorption performance of 1-naphthol on NDA-150 was explored and compared with that on the commercial hydrophobic resin XAD-4. The sorption rates of 1-naphthol onto both of the two resins obey the pseudo-second-order kinetics, and are limited by the successive steps of film diffusion and intraparticle diffusion. The greater sorption rate on XAD-4 than NDA-150 is probably due to the larger average pore diameter of XAD-4. All the adsorption isotherms can be represented by Langmuir equation. The larger capacity and stronger affinity of NDA-150 than XAD-4 probably result from the abundant microporous structure and polar groups of NDA-150. In aqueous phase hydrophobic XAD-4 adsorbs 1-naphthol driven principally by enthalpy change, while the adsorption onto hydrophilic NDA-150 driven mainly by entropy change. The breakthrough and the total sorption capacity of NDA-150 to 1-naphthol were obtained to be 1.10 and 1.58 mmol mL(-1) resin at 293 K, respectively. Nearly 100% regeneration efficiency for the resin was achieved by ethanol at 313 K.

Effect of 3-D distribution of ZVI nanoparticles confined in polymeric anion exchanger on EDTA-chelated Cu(II) removal.

Millispherical nanocomposites are promising for water decontamination combining the high reactivity of the confined nanoparticles and the excellent hydrodynamic properties of the supporting host. However, the effect of three-dimensional (3-D) distribution of the nanoparticles inside the host on the performance of the nanocomposite was highly dependent on the specific decontamination process. In this study, four D201-ZVI nanocomposites from peripheral to uniform 3-D distributions of nZVI were prepared to evaluate the effect of 3-D distribution of the confined nanoparticles inside the host beads on the removal of EDTA-chelated Cu(II). The performance of Cu(II) removal increased with the 3-D distribution tailoring towards the peripheral region, which was also validated under various solution chemistry conditions in terms of initial pH, DO, and coexisting sulfate. The mechanism underlying the 3-D distribution effect may be ascribed to three perspectives. First, the dissolution of Fe was also higher from the peripherally distributed nZVI nanocomposites compared with the uniform ones. In addition, SEM-EDS analysis revealed the immobilization of Cu occurred at limited depth from the outermost surface of the composite beads, leading to the low spatial utilization of the inner core region. Furthermore, XRD and XPS analyses demonstrated the higher chemical utilization of nZVI for the outer-distributed nanocomposites owing to the shortened pathway for mass transfer. This study shed new light on the design and development of tunable nanocomposites of improved reactivity for water decontamination processes.