ABSTRACT
Despite the increasing prevalence of atmospheric nanoplastics (NPs), there remains limited research on their phytotoxicity, foliar absorption, and translocation in plants. In this study, we aimed to fill this knowledge gap by investigating the physiological effects of tomato leaves exposed to differently charged NPs and foliar absorption and translocation of NPs. We found that positively charged NPs caused more pronounced physiological effects, including growth inhibition, increased antioxidant enzyme activity, and altered gene expression and metabolite composition and even significantly changed the structure and composition of the phyllosphere microbial community. Also, differently charged NPs exhibited differential foliar absorption and translocation, with the positively charged NPs penetrating more into the leaves and dispersing uniformly within the mesophyll cells. Additionally, NPs absorbed by the leaves were able to translocate to the roots. These findings provide important insights into the interactions between atmospheric NPs and crop plants and demonstrate that NPs' accumulation in crops could negatively impact agricultural production and food safety.
Subject(s)
Antioxidants , MicroplasticsABSTRACT
Micro/nanoplastics (M/NPs) in water have raised global concern due to their potential environmental risks. To reestablish a M/NPs free world, enormous attempts have been made toward employing chemical technologies for their removal in water. This review comprehensively summarizes the advances in chemical degradation approaches for M/NPs elimination. It details and discusses promising techniques, including photo-based technologies, Fenton-based reaction, electrochemical oxidation, and novel micro/nanomotors approaches. Subsequently, critical influence factors, such as properties of M/NPs and operating factors, are analyzed in this review specifically. Finally, it concludes by addressing the current challenges and future perspectives in chemical degradation. This review will provide guidance for scientists to further explore novel strategies and develop feasible chemical methods for the improved control and remediation of M/NPs in the future.
Subject(s)
Environmental Restoration and Remediation , Water Pollutants, Chemical , Plastics , Microplastics , Water , Water Pollutants, Chemical/analysisABSTRACT
Interactions of microplastics (MPs) biofilm with antibiotic resistance genes (ARGs) and antibiotics in aquatic environments have made microplastic biofilm an issue of keen scholarly interest. The process of biofilm formation and the degree of ARGs enrichment in the presence of antibiotic-selective pressure and the impact on the microbial community need to be further investigated. In this paper, the selective pressure of ciprofloxacin (CIP) and illumination conditions were investigated to affect the physicochemical properties, biomass, and extracellular polymer secretion of polyvinyl chloride (PVC) microplastic biofilm. In addition, relative copy numbers of nine ARGs were analyzed by real-time quantitative polymerase chain reaction (qPCR). In the presence of CIP, microorganisms in the water and microplastic biofilm were more inclined to carry associated ARGs (2-3 times higher), which had a contributing effect on ARGs enrichment. The process of pre-microplastic biofilm formation might have an inhibitory effect on ARGs (total relative abundance up to 0.151) transfer and proliferation compared to the surrounding water (total relative abundance up to 0.488). However, in the presence of CIP stress, microplastic biofilm maintained the abundance of ARGs (from 0.151 to 0.149) better compared to the surrounding water (from 0.488 to 0.386). Therefore, microplastic biofilm act as abundance buffer island of ARGs stabilizing the concentration of ARGs. In addition, high-throughput analyses showed the presence of antibiotic-resistant (Pseudomonas) and pathogenic (Vibrio) microorganisms in biofilm under different conditions. The above research deepens our understanding of ARGs enrichment in biofilm and provides important insights into the ecological risks of interactions between ARGs, antibiotics, and microplastic biofilm.
Subject(s)
Microplastics , Plastics , Genes, Bacterial , Rivers , Anti-Bacterial Agents/pharmacology , Drug Resistance, Microbial/genetics , Ciprofloxacin , Water , BiofilmsABSTRACT
Despite the fact that microplastic pollution in terrestrial ecosystems has received increasing attention, there are few studies on the potential effects of different microplastics on terrestrial plants. In this study, the toxicity of polystyrene (PS), polyethylene (PE) and polypropylene (PP) microplastics with different concentrations (0, 10, 100, 500 and 1000 mg/L) to tomato (Lycopersicon esculentum L.) were studied by a hydroponic experiment. The results showed that the three microplastics had inhibitory effects on seed germination when the concentration was less than or equal to 500 mg/L, and the inhibition rate ranged from 10.1% to 23.6%. Interestingly, the inhibition effect was alleviated under 1000 mg/L microplastic treatment. Generally, PE was more toxic to seedling growth than PS and PP. Additionally, it was confirmed that microplastics could cause oxidative stress in plants, and PP was relatively less toxic to antioxidant enzymes than PS and PE. These results can provide a theoretical basis and data support for further investigation on the toxicity of microplastics to tomatoes, and contribute to understanding the type specificity of microplastics' toxic effects on plants.
Subject(s)
Solanum lycopersicum , Water Pollutants, Chemical , Ecosystem , Microplastics/toxicity , Plastics , Polyethylene , Polypropylenes/toxicity , Polystyrenes/toxicity , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/toxicityABSTRACT
Awareness of risks posed by widespread presence of nanoplastics (NPs) and bioavailability and potential to interact with organic pollutants has been increasing. Inhalation is one of the more important pathways of exposure of humans to NPs. In this study, combined toxicity of concentrations of polystyrene NPs and various phthalate esters (PAEs), some of the most common plasticizers, including dibutyl phthalate (DBP) and di-(2-ethyl hexyl) phthalate (DEHP) on human lung epithelial A549 cells were investigated. When co-exposed, 20 µg NPs/mL increased viabilities of cells exposed to either DBP or DEHP and the modulation of toxic potency of DEHP was greater than that of DBP, while the 200 µg NPs/mL resulted in lesser viability of cells. PAEs sorbed to NPs decreased free phase concentrations (Cfree) of PAEs, which resulted in a corresponding lesser bioavailability and joint toxicity at the lesser concentration of NPs. The opposite effect was observed at the greater concentration of NPs, which may result from the dominated role of NPs in the combined toxicity. Furthermore, our data showed that oxidative stress and inflammatory reactions were mechanisms for combined cytotoxicities of PAEs and NPs on A549 cells. Results of this study emphasized the combined toxic effects and mechanisms on human lung cells, which are helpful for assessing the risk of the co-exposure of NPs and organic contaminants in humans.
Subject(s)
Environmental Pollutants/toxicity , Microplastics/toxicity , Phthalic Acids/toxicity , Polystyrenes/toxicity , A549 Cells , China , Dibutyl Phthalate/toxicity , Diethylhexyl Phthalate , Esters , Humans , Lung , Oxidative Stress , PlasticizersABSTRACT
Cyanobacteria blooms (CBs) caused by eutrophication pose a global concern, especially Microcystis aeruginosa (M. aeruginosa), which could release harmful microcystins (MCs). The impact of microplastics (MPs) on allelopathy in freshwater environments is not well understood. This study examined the joint effect of adding polystyrene (PS-MPs) as representative MPs and two concentrations (2 and 8 mg/L) of pyrogallol (PYR) on the allelopathy of M. aeruginosa. The results showed that the addition of PS-MPs intensified the inhibitory effect of 8 mg/L PYR on the growth and photosynthesis of M. aeruginosa. After a 7-day incubation period, the cell density decreased to 69.7 %, and the chl-a content decreased to 48 % compared to the condition without PS-MPs (p < 0.05). Although the growth and photosynthesis of toxic Microcystis decreased with the addition of PS-MPs, the addition of PS-MPs significantly resulted in a 3.49-fold increase in intracellular MCs and a 1.10-fold increase in extracellular MCs (p < 0.05). Additionally, the emission rates of greenhouse gases (GHGs) (carbon dioxide, nitrous oxide and methane) increased by 2.66, 2.23 and 2.17-fold, respectively (p < 0.05). In addition, transcriptomic analysis showed that the addition of PS-MPs led to the dysregulation of gene expression related to DNA synthesis, membrane function, enzyme activity, stimulus detection, MCs release and GHGs emissions in M. aeruginosa. PYR and PS-MPs triggered ROS-induced membrane damage and disrupted photosynthesis in algae, leading to increased MCs and GHG emissions. PS-MPs accumulation exacerbated this issue by impeding light absorption and membrane function, further heightening the release of MCs and GHGs emissions. Therefore, PS-MPs exhibited a synergistic effect with PYR in inhibiting the growth and photosynthesis of M. aeruginosa, resulting in additional risks such as MCs release and GHGs emissions. These results provide valuable insights for the ecological risk assessment and control of algae bloom in freshwater ecosystems.
Subject(s)
Greenhouse Gases , Microcystins , Microcystis , Microplastics , Pyrogallol , Microcystis/physiology , Microcystis/drug effects , Microcystins/toxicity , Microplastics/toxicity , Allelopathy , Water Pollutants, Chemical/toxicity , Photosynthesis/drug effectsABSTRACT
The microplastics and organic additives formed in routine use of plastic takeaway food containers may pose significant health risks. Thus, we collected plastic containers made of polystyrene, polypropylene, polyethylene terephthalate, polylactic acid and simulated two thermal usages, including hot water (I) and microwave treatments (M). Nile Red fluorescence staining was developed to improve accurate counting of microplastics with the aid of TEM and DLS analysis. The quantity of MPs released from thermal treatments was determined ranging from 285.7 thousand items/cm2 to 681.5 thousand items/cm2 in containers loaded with hot water with the following order: IPS>IPP>IPET>IPLA, while microwave treatment showed lower values ranging from 171.9 thousand items/cm2 to 301.6 thousand items/cm2. In vitro toxicity test using human intestinal epithelial Caco-2 cells indicated decrease of cell viability in raw leachate, resuspended MPs and supernatants, which might further lead to cell membrane rupture, ROS production, and decreased mitochondrial membrane potential. Moreover, the leachate inhibited the expression of key genes in the electron transport chain (ETC) process, disrupted energy metabolism. For the first time, we isolate the actually released microplastics and organic substances for in vitro toxicity testing, and demonstrate their potential impacts to human intestine. SYNOPSIS: Plastic take-out containers may release microplastics and organic substances during daily usage, both of which can cause individual and combined cytotoxic effects on human colon adenocarcinoma cells Caco-2.
Subject(s)
Cell Survival , Food Packaging , Microplastics , Plastics , Humans , Microplastics/toxicity , Caco-2 Cells , Plastics/toxicity , Plastics/chemistry , Cell Survival/drug effects , Reactive Oxygen Species/metabolism , Microwaves , Membrane Potential, Mitochondrial/drug effects , Intestines/drug effects , Hot TemperatureABSTRACT
Microplastics (MPs) have emerged as a novel and highly concerning contaminant that is ubiquitous in the aqueous environment. However, the aging of MPs induced by dissolved organic matter (DOM), especially biochar-derived dissolved organic matter (BDOM), and the biological toxicity after aging are not fully understood. In this study, the effects of biochar-derived BDOMs on the photoaging and biotoxicity of MPs were investigated at different pyrolysis temperatures using micro-scale polyethylene (PE) as an example. The results showed that the amount of ·OH generated by the BDOM/PE systems was related to the molecular composition and structure of BDOMs. High temperature BDOM7/9 with less lignin-like (34.33 % / 41.80 %) and more lipid (24.58 % / 19.88 %) content could produce more ·OH by itself, and its binding ability with PE was weaker due to its less hydrophobic components (SUVA260 = 0.10 / 0.11), which resulted in a weaker shading effect and less inhibition of the system, thus resulting in more ·OH production in the high temperature BDOM7/9/PE system. However, the involvement of BDOM, although favoring the long-term stable ·OH production of the system, did not significantly promote the photoaging of MPs. Furthermore, combined in vivo and in vitro biotoxicity studies of MPs showed that photoaging PE with the involvement of BDOM greatly improved systemic inflammation and tissue damage, as well as reactive oxygen species (ROS, such as ·OH and -OH)-induced cell death. For example, the addition of BDOM5/PE-light reduced the cell death of human lung, liver, and kidney cells from 54.70 %, 69.39 %, and 48.35 % to 22.78 %, 33.13 %, and 25.83 %, respectively, compared to the PE-light group. The results of this study contribute to an in-depth understanding of the environmental behavior of BDOM and MPs systems.
Subject(s)
Charcoal , Dissolved Organic Matter , Microplastics , Humans , Microplastics/toxicity , Plastics , Temperature , Pyrolysis , Polyethylene , AgingABSTRACT
Microplastics and nanoplastics (MNPs) have attracted much attention since their wide distribution in the environment and organisms. MNPs in the environment adsorb other organic pollutants, such as Perfluorooctane sulfonate (PFOS), and cause combined effects. However, the impact of MNPs and PFOS in agricultural hydroponic systems is unclear. This study investigated the combined effects of polystyrene (PS) MNPs and PFOS on soybean (Glycine max) sprouts, which are common hydroponic vegetable. Results demonstrated that the adsorption of PFOS on PS particles transformed free PFOS into adsorbed state and reduced its bioavailability and potential migration, thus attenuating acute toxic effects such as oxidative stress. TEM and Laser confocal microscope images showed that PS nanoparticles uptake in sprout tissue was enhanced by the adsorption of PFOS which is because of changes of the particle surface properties. Transcriptome analysis showed that PS and PFOS exposure promoted soybean sprouts to adapt to environmental stress and MARK pathway might play an important role in recognition of microplastics coated by PFOS and response to enhancing plant resistance. This study provided the first evaluation about the effect of adsorption between PS particles and PFOS on their phytotoxicity and bioavailability, in order to provide new ideas for risk assessment.
Subject(s)
Glycine max , Microplastics , Biological Availability , Plastics , PolystyrenesABSTRACT
In this study, simple and environmentally friendly magnetic biochars were successfully prepared by ball-milling biochar with Fe3O4 nanoparticles to remove NPs from water. The magnetic biochars synthesized at various pyrolysis temperatures of 300 °C (MBC300), 500 °C (MBC500), and 700 °C (MBC700) were used to eliminate the unmodified (PS), aged under UV radiation (UVPS), amine-modified (PS-NH2) and carboxylate-modified (PS-COOH) polystyrene NPs of 100 nm in size. Results showed that the removal efficiency of MBC300, MBC500, and MBC700 for PS were 43.67, 82.73 and 57.02%, which were 3.01, 5.76, and 3.10 times greater than that of corresponding pristine biochars at the same temperatures, respectively, and the strongest removal efficiency of MBC500 was 95.2% since it has the largest specific surface area and abundant oxygen-containing functional groups. The surface properties of the NPs affected their removal, and the PS-NH2 had the highest removal rate using magnetic biochars. Compared to pristine biochars, the magnetic biochars displayed faster adsorption kinetics. The Langmuir maximum adsorption capacity of magnetic biochars for NPs were 107.7181-229.5772 mg/g, much greater than those of the pristine biochars (55.4602-80.3096 mg/g). Mechanism analysis revealed that the hydrophobicity, electrostatic attraction, H-bonding formation and π-π conjunction between the NPs and MBCs contributed to the adsorption process. This work highlights the promising potential of ball milling to be used as a simple technique for the preparation of magnetic biochar to remove NPs, especially NPs with various surface groups.
Subject(s)
Pinus , Water Pollutants, Chemical , Polystyrenes , Microplastics , Charcoal , Adsorption , Magnetic Phenomena , Water Pollutants, Chemical/analysisABSTRACT
As two pollutants with similar transport pathways, microplastics (MPs) and antibiotics (ATs) inevitably co-exist in water environments, and their interaction has become a topic of intense research interest for scholars over the past few years. This paper comprehensively and systematically reviews the current interaction between MPs and ATs, in particular, the role played by biofilm developed MPs (microplastic biofilm). A summary of the formation process of microplastic biofilm and its unique microbial community structure is presented in the paper. The formation of microplastic biofilm can enhance the adsorption mechanisms of ATs on primary MPs. Moreover, microplastic biofilm system is a diverse and vast reservoir of genetic material, and this paper reviews the mechanisms by which microplastics with biofilm drive the production of antibiotic resistance genes (ARGs) and the processes that selectively enrich for more ARGs. Meanwhile, the enrichment of ARGs may lead to the development of microbial resistance and the gradual loss of the antimicrobial effect of ATs. The transfer pathways of ARGs affected by microplastic biofilm are outlined, and ARGs dependent transfer of antibiotic resistance bacteria (ARB) is mainly through horizontal gene transfer (HGT). Furthermore, the ecological implications of the interaction between microplastic biofilm and ATs and perspectives for future research are reviewed. This review contributes to a new insight into the aquatic ecological environmental risks and the fate of contaminants (MPs, ATs), and is of great significance for controlling the combined pollution of these two pollutants.
Subject(s)
Environmental Pollutants , Microplastics , Plastics , Genes, Bacterial , Anti-Bacterial Agents/pharmacology , Angiotensin Receptor Antagonists , Angiotensin-Converting Enzyme Inhibitors , Drug Resistance, Microbial/genetics , BiofilmsABSTRACT
Because of the excellent properties, plastics have been widely used in the past decades and caused serious environmental issues. As an excellent substitute for conventional plastics, the biodegradable plastics have attracted increasing attention. However, biodegradable plastics may produce more micro/nanoplastics in the short time compared with conventional plastics, and cause more serious ecological risks. In this study, the short-term toxicity of nanoplastics released from biodegradable and conventional plastics on Streptomyces coelicolor M145 was investigated. After 30 days of degradation, the biodegradable microplastics, polylactic acid (PLA) and polyhydroxyalkanoates (PHA) released more secondary nanoplastics than conventional microplastics, polystyrene (PS). After exposure, PLA and PHA nanoplastics showed significant toxicity to M145. The survival rate of M145 cells was 16.1% after treatment with PLA nanoplastics for 7 days (PLA-7). The toxicity of PHA was lower than that of PLA. This might have been due to the agglomeration of PHA nanoplastics in the solution. Compared with the controls, the PS secondary nanoplastics showed no significant toxicity to M145. After the treatment, the production of antibiotics, actinorhodin (ACT) and undecylprodigiosin (RED), significantly increased. The yields of ACT and RED reached their maximum values after treatment with PLA-7, which were 4.2-fold and 2.1-fold higher than those of the controls, respectively. The addition of biodegradable nanoplastics significantly increased the expression of these key pathway-specific regulatory genes, leading to increased antibiotic production. This study provides toxicological insights into the impacts of conventional and biodegradable microplastics on S. coelicolor.
Subject(s)
Biodegradable Plastics , Streptomyces coelicolor , Microplastics/toxicity , Streptomyces coelicolor/genetics , Polyesters/toxicity , Polystyrenes/toxicity , Anti-Bacterial AgentsABSTRACT
Microplastics (MPs) and nanoplastics (NPs) have been widely studied, mostly focusing on the methods of separation, detection, and adsorption or the ecological effects in aquatic ecosystems. When different sources and types of MPs/NPs enter the soil, they can affect the biogeochemical cycle in terms of the direct impacts on soil physicochemical properties and soil organisms, and the indirect impact on soil biota through changes in soil material cycling. To date, a few studies have focused on the effects of MPs/NPs on soil ecosystems, including soil properties, microbial communities, soil fauna, and plants, as well as the potential or affirmed correlations among them. In this review, we summarized the recent literature on soil MPs/NPs focusing on their types, sources, separation, and ecological impacts on soil properties, microbes, and plants. We attempted to establish an overall relationship between MPs/NPs and soil plant system. Based on existing studies, we also highlight the research gaps and propose several directions for future studies.
Subject(s)
Microbiota , Microplastics , Ecosystem , Plastics/toxicity , SoilABSTRACT
Ball-milled plastic char (BMPC) was manufactured by ball-milling of native plastic char (PC) that was synthesized via slow pyrolysis of polyethylene terephthalate (PET) water bottle waste, and its adsorption characteristics of aqueous phenanthrene (PHE), phenol, and 2,4,6-trichlorophenol (2,4,6-TCP) and its possible mechanisms were investigated. With the increase of PC pyrolysis temperature, the specific surface area of BMPC increased obviously, forming larger functional groups compared to PC. Boehm titration showed that total acidic groups of BMPC decreased significantly with the increase of pyrolysis temperature. The sorption kinetics of three adsorbates was adequately simulated by pseudo-second-order model (R2 > 0.99). Langmuir model fitted well the adsorption isotherms of PHE and phenol, while Freundlich model simulated the adsorption isotherm of 2,4,6-TCP better. The adsorption amount of PHE, phenol, and 2,4,6-TCP increased significantly as the pyrolysis temperature increased. The maximum BMPC adsorption capacity reached 21.9 mg·g-1 (for PHE), 106 mg·g-1 (for phenol), and 303 mg·g-1 (for 2,4,6-TCP) at 25 °C in aqueous solution. FTIR analysis suggested that surface sorption-based π-π interaction was a dominant mechanism of PHE adsorption; meanwhile, H-bonding between O-containing groups on BMPC and hydroxyl groups of adsorbates was responsible for phenol and 2,4,6-TCP removal. This paper shows that BMPC can be used as adsorbent for treating aromatic compounds in aqueous environment and has an economic worth of application.
Subject(s)
Environmental Pollutants , Phenanthrenes , Water Pollutants, Chemical , Adsorption , Plastics , Polyethylene Terephthalates , Charcoal , Water Pollutants, Chemical/analysis , Kinetics , Phenol , PhenolsABSTRACT
Multiple sources of microplastics (MPs) in farmland could result in the changing of microbial community and the plant growth. Most studies of MPs in agricultural system have focused on the effects of single types of MPs on growth of plants, while neglect interactions between multiple types of MPs. In this study a pot-experiment was conducted to investigate the effects of multiple types of MPs, including polystyrene beads: M1, 5 µm, M2, 70 nm and degradable mulching film (DMF) fragments on growth of wheat seedlings and associated rhizosphere microbial community. CKD (adding DMF) significantly reduced plant height and base diameter of wheat seedlings. DMF in combination with M2, significantly increased plant height and aboveground biomass, but decreased the base diameter. Actinobacteria was the dominant taxa in the rhizosphere bacterial community in various treatments. PCoA analysis showed that the bacterial composition in M2HD (100 mg kg-1 M2 with DMF) was significantly different from that of CKD and M2LD (10 mg kg-1 M2 with DMF). At the level of genera, the dominant fungi in CKD and M2LD were in the genus Fusarium, which is the cause of wheat fusarium blight and Alternaria, which results in decreased base diameter. In CK (control group) and M2HD, Blastobotrys exhibited the greatest abundance, which assisted wheat seedlings in resisting Verticillium disease. Cluster and PCoA analysis showed the fungal composition in CKD was significantly different from CK, M2LD and M2HD. These findings suggest MPs potentially have selective effects on pathogens that affect growth of plants and potentially safety of the food.
Subject(s)
Rhizosphere , Triticum , Microplastics , Plant Roots , Plastics , Seedlings , Soil , Soil MicrobiologyABSTRACT
The environmental and human health risks posed by nanoplastics have attracted considerable attention; however, research on the combined toxicity of nanoplastics and plasticizers is limited. This study analyzed the combined effects of nanoplastics and dibutyl phthalate (DBP) on Streptomyces coelicolor M145 (herein referred to as M145) and its mechanism. The results demonstrated that when the concentration of both nanoplastics and DBP was 1 mg/L, the co-addition was not toxic to M145. When the DBP concentration increased to 5 mg/L, the combined toxicity of 1 mg/L nanoplastics and 5 mg/L DBP reduced when compared to the 5 mg/L DBP treatment group. Similarly, the combined toxicity of 10 mg/L nanoplastics and 1 mg/L DBP on M145 was also lower than that of only 10 mg/L nanoplastics. The co-addition of 10 mg/L nanoplastics and 5 mg/L DBP resulted in the lowest survival rate (41.3%). The key reason for differences in cytotoxicity were variations in the agglomeration of nanoplastics and the adsorption of DBP on nanoplastics. The combination of 10 mg/L nanoplastics and 5 mg/L DBP maximized the production of antibiotics; actinorhodin and undecylprodigiosin yields were 3.5 and 1.8-fold higher than that of the control, respectively. This indicates that the excessive production of antibiotics may be a protective mechanism for bacteria. This study provides a new perspective for assessing the risk of co-exposure to nanoplastics and organic contaminants on microorganisms in nature.
Subject(s)
Streptomyces coelicolor , Anti-Bacterial Agents/toxicity , Dibutyl Phthalate/toxicity , Humans , Microplastics , PlasticizersABSTRACT
Microplastics (MPs), especially biodegradable MPs (BMPs) have attracted increasing attention in recent years. However, the effects of MPs with different biodegradability on the soil-plant systems are not well explored. In this study, the effects of polyethylene MPs (PEMPs) and polylactic acid MPs (PLAMPs) on physio-biochemical performance and metabolomic profile of soybean (Glycine max), as well as the bacterial communities in soil were investigated. Our results showed that PEMPs had no noticeable toxicity on the plant growth, while 0.1% PLAMPs significantly decreased the root length by 27.53% when compared with the control. The peroxidase (POD) activity was reduced and catalase (CAT) activity was increased by MPs in plant leaves. The metabolomics study suggested that the significantly affected metabolic pathway is amino acid metabolism. Additionally, Shannon and Simpson indices of rhizosphere soil were changed only under 0.1% PLAMPs. The key bacteria involved in the dinitrogen fixation were also altered. This study provides a novel insight into the potential effects of MPs with different biodegradability on soil-plant systems and highlights that BMPs might have stronger negative effects for terrestrial ecosystem, which needs to be further explored in future research.
Subject(s)
Soil Pollutants , Soil , Bacteria , Ecosystem , Microplastics , Plants , Plastics , Polyesters , Polyethylene/toxicity , Soil/chemistry , Soil Microbiology , Soil Pollutants/chemistry , Soil Pollutants/toxicityABSTRACT
As microplastics and nanoplastics (MNPs) are widely distributed in the environment and can be transferred to human body through food chain, their potential impact on human health is of great concern. Perfluorooctane sulfonate (PFOS) is persistent, bioaccumulative and can be adsorbed by MNPs. However, there are few studies on the combined human health effects of MNPs with PFOS. In this study, the effects of polystyrene (PS) particles and PFOS on human colon adenocarcinoma cell Caco-2 were investigated in vitro to explore the combined toxicity from cellular level, and the toxic mechanism was further illustrated. Results showed that the presence of PFOS significantly increased the cell uptake of PS nanoparticles by >30 %, which is related to variations of the surface properties of PS particles, including the decrease of hydration kinetic diameter, the rise of surface potential and the adsorption of hydrophobic PFOS molecules. The toxic effect of PFOS was weakened in the presence of PS particles under low PFOS concentration (10 µg/mL), which is because the bioavailability of PFOS was reduced after adsorption. PS particles with small particle size (20 nm) showed higher cell uptake and ROS production, while PS particles with large particle size (1 µm) led to higher lipid oxidation degree and related membrane damage as well as mitochondrial stress. This study provides the first evaluation of combined toxicity of MNPs and PFOS on human intestinal cells, in order to support the risk assessment of combined pollution of MNPs and PFOS on human health.
Subject(s)
Adenocarcinoma , Alkanesulfonic Acids , Colonic Neoplasms , Fluorocarbons , Alkanesulfonic Acids/toxicity , Caco-2 Cells , Fluorocarbons/analysis , Fluorocarbons/toxicity , Humans , Lipids , Microplastics/toxicity , Plastics , Polystyrenes/toxicity , Reactive Oxygen SpeciesABSTRACT
Microplastics are emerging persistent pollutants which have attracted increasing attention worldwide. Although microplastics have been widely detected in aquatic environments, their presence in soil ecosystems remains largely unexplored. Plastic debris accumulates in farmland, causing serious environmental problems, which may directly affect food substances or indirectly affect the members in each trophic level of the food chain. This review summarizes the origins, migration, and fate of microplastics in agricultural soils and discusses the interaction between microplastics and the components in farmland from the perspectives of toxicology and accumulation and deduces impacts on ecosystems by linking the organismal response to an ecological role. The effects on farmland ecosystem function are also discussed, emphasizing the supply of agricultural products, food chain pathways, carbon deposition, and nitrogen cycling and soil and water conservation, as microplastic pollution will affect agricultural ecosystems for a long period, posing an ecological risk. Finally, several directions for future research are proposed, which is important for reducing the effect of microplastics in agricultural systems.
Subject(s)
Microplastics , Plastics , Ecosystem , Environmental Monitoring , Microplastics/toxicity , SoilABSTRACT
Microplastics can regulate greenhouse gas emissions from environmental systems and affect microbes in the environment. However, the effect of microplastics in freshwater sediment system is still not well studied. In this paper, polyethylene terephthalate (PET) particles with six different diameters of 5-2000 µm were added to freshwater sediment, PET exposing for 90 days was carried out and its effect on greenhouse gas emissions, nutrients cycle and microbial communities were studied. In the 5 µm experimental group, carbon dioxide (CO2) emissions were significantly promoted in the 7-30 days and nitrogen monoxide (N2O) emissions were significantly promoted in the 7 days after cultivation. Microplastics in the range of 300-800 µm significantly promoted CO2 emissions after three days of culture. In addition, microplastics increased the total organic carbon (TOC) content in freshwater sediment and changed microbial diversity, especially increased the microorganisms capable of degrading complex organics such as Saprospiraceae. There was a positive correlation between N2O emission and nitrate (NO3-) content in sediment after 3 days of culture, while greenhouse gas emission was mainly related to TOC content after 90 days of culture. These results showed that microplastics could affect the carbon and nitrogen cycling process of shallow lake ecosystem.