ABSTRACT
BACKGROUND: Microplastics, produced through degradation of environmental plastic pollution, have been detected in human tissues including placenta and fetal meconium. Cell culture and animal studies have demonstrated potential reproductive toxicity of these particles; however, their association with adverse fertility or pregnancy outcomes in humans is not known. OBJECTIVES: To synthesise evidence for the presence of microplastics in human reproductive tissue and their associations with environmental exposures and reproductive outcomes. SEARCH STRATEGY: MEDLINE, Embase, Emcare, CINAHL, ClinicalTrials.gov and ICTRP were searched from inception to 03/02/2023. SELECTION CRITERIA: Studies of human participants, assessing presence of microplastics in reproductive tissues, environmental exposures to microplastics, and fertility- or pregnancy-related outcomes. DATA COLLECTION AND ANALYSIS: Two independent reviewers selected studies and extracted data on study characteristics, microplastics detected, environmental exposures and reproductive outcomes. Narrative synthesis was performed due to methodological heterogeneity. MAIN RESULTS: Of 1094 citations, seven studies were included, covering 96 participants. Microplastics composed of 16 different polymer types were detected in both placental and meconium samples. Two studies reported associations between lifestyle factors (daily water intake, use of scrub cleanser or toothpaste, bottled water and takeaway food) and placental microplastics. One study reported associations between meconium microplastics and reduced microbiota diversity. One reported placental microplastic levels correlated with reduced birthweights and 1-minute Apgar scores. CONCLUSIONS: There is a need for high-quality observational studies to assess the effects of microplastics on human reproductive health.
Subject(s)
Microplastics , Plastics , Female , Humans , Pregnancy , Microplastics/toxicity , Placenta , Plastics/toxicity , Pregnancy Outcome , Prenatal CareABSTRACT
Plastic pollution is becoming a global problem due to its ubiquitous occurrence and the impacts detected for many species. However, the research about plastics in nests of terrestrial bird species has remained relatively overlooked in comparison to those devoted to marine ecosystems. Here we study the occurrence and patterns of use of anthropogenic material in nests of two passerine birds, the Eurasian magpie (Pica pica) and the European serin (Serinus serinus), breeding in an orange tree cultivation in Mediterranean Spain. Our results show that both species use extensively plastic debris as nest material; almost 71% of the European serin nests and 96% of nests of Eurasian magpies contained plastic debris. Furthermore, by analyzing the plastic debris availability in the agricultural landscape surveyed we confirmed a selection pattern in the two species. Thus, both species preferably select plastic filaments over other plastic debris. The Eurasian magpie does not select plastic based on size or color but the European serin avoid black plastics prefer smaller fragments in comparison to the average size available. Moreover, we suggest the apparent similarity of plastic filaments with the natural materials typically used by these species, as well as how they use the plastic in their nests could influence their selection behavior. More studies focused on terrestrial birds inhabiting human modified habitats could offer a deeper approach to how plastic debris interacts with wildlife in different ways.
Subject(s)
Agriculture , Nesting Behavior , Plastics , Animals , Plastics/analysis , Spain , Waste Products/analysis , Passeriformes , Environmental MonitoringABSTRACT
The presence of plastic and microplastic within the oceans as well as in marine flora and fauna have caused a multitude of problems that have been the topic of numerous investigations for many years. However, their impact on human health remains largely unknown. Such plastic and microplastic particles have been detected in blood and placenta, underlining their ability to enter the human body. Plastics also contain other compounds, such as plasticizers, antioxidants, or dyes, whose impact on human health is currently being studied. Critical enzymes within the metabolism of endogenous molecules, especially of xenobiotics, are the cytochrome P450 monooxygenases (CYPs). Although their importance in maintaining cellular balance has been confirmed, their interactions with plastics and related products are poorly understood. In this study, the possible relationship between different plastic-related compounds and CYP3A4 as one of the most important CYPs was analyzed using hepatic cells overexpressing this enzyme. Beginning with virtual compound screening and molecular docking of more than 1000 plastic-related compounds, several candidates were identified to interact with CYP3A4. In a second step, RNA-sequencing was used to study in detail the transcriptome-wide gene expression levels affected by the selected compounds. Three candidate molecules ((2,2'-methylenebis(6-tert-butyl-4-methylphenol), 1,1-bis(3,5-di-tert-butyl-2-hydroxyphenyl)ethane, and 2,2'-methylenebis(6-cyclohexyl-4-methylphenol)) had an excellent binding affinity to CYP3A4 in-silico as well as cytotoxic effects and interactions with several metabolic pathways in-vitro. We identified common pathways influenced by all three selected plastic-related compounds. In particular, the suppression of pathways related to mitosis and 'DNA-templated DNA replication' which were confirmed by cell cycle analysis and single-cell gel electrophoresis. Furthermore, several mis-regulated metabolic and inflammation-related pathways were identified, suggesting the induction of hepatotoxicity at different levels. These findings imply that these compounds may cause liver problems subsequently affecting the entire organism.
Subject(s)
Cresols , Cytochrome P-450 CYP3A , Transcriptome , Pregnancy , Female , Humans , Cytochrome P-450 CYP3A/metabolism , Hep G2 Cells , Plastics/toxicity , Microplastics , Molecular Docking Simulation , Cytochrome P-450 Enzyme System/genetics , Cytochrome P-450 Enzyme System/metabolismABSTRACT
The goal of the current study is to evaluate the heavy metal rainfall contamination in the vicinity brought on by the Erbil Steel Factory in Iraq during the study period. The study's findings revealed the concentration of all studied heavy metals in the precipitation near and around the factory is significantly higher than that of the rural area of Barzan village which is used as a control site. The average concentration of the metals is in descending order manganese (Mn) > lead (Pb) > iron (Fe) > arsenic (As) > cobalt (Co) > selenium (Se) > mercury (Hg) > and cadmium (Cd) for the polluted site. The geo-accumulation index (I-geo) of the heavy metal Mn in the rainfall around the steel factory site is 6.28 > 5 which indicates extreme contamination. While the Igeo values of Cd, As, and Fe are 4.87, 4.54, and 4.04 > 4 that indicate heavy to extreme contamination, for Pb, 3.80 > 3 indicates moderate to heavy contamination, Cd 1.68 > 1 indicates moderate contamination, Hg 0.46 > 0 indicates uncontaminated to moderate contamination, and Se - 0.36 < 0 indicates uncontaminated. The pollution load index (PLI) of the rainwater around the steel factory site is 13.46 > 1, demonstrating that the area is highly metal-contaminated.
Subject(s)
Air Pollution , Arsenic , Mercury , Metals, Heavy , Selenium , Cadmium , Steel , Iraq , Lead , Environmental Monitoring , Risk Assessment , Metals, Heavy/analysis , Manganese , ChinaABSTRACT
Plastic waste is a global environmental burden and long-lasting plastic polymers, including ubiquitous and toxic polyurethanes (PUs), rapidly accumulate in the water environments. In this study, samples were collected from the three alkaline groundwater occurrences in the geotectonic regions of the Pannonian basin of northern Serbia (Torda and Slankamen Banja) and Inner Dinarides of western Serbia (Mokra Gora) with aim to isolate and identify bacteria with plastic- and lignocellulose-degrading potential, that could be applied to reduce the burden of environmental plastic pollution. The investigated occurrences belong to cold, mildly alkaline (pH: 7.6-7.9) brackish and hyperalkaline (pH: 11.5) fresh groundwaters of the SO4 - Na + K, Cl - Na + K and OH, Cl - Ca, Na + K genetic type. Full-length 16S rDNA sequencing, using Oxford Nanopore sequencing device, was performed with DNA extracted from colonies obtained by cultivation of all groundwater samples, as well as with DNA extracted directly from one groundwater sample. The most abundant genera belong to Pseudomonas, Acidovorax, Kocuria and Methylotenera. All screened isolates (100%) had the ability to grow on at least 3 of the tested plastic and lignocellulosic substrates, with 53.9% isolates degrading plastic substrate Impranil® DLN-SD (SD), a model compound for PUs degradation. Isolates degrading SD that were identified by partial 16S rDNA sequencing belong to the Stenotrophomonas, Pseudomonas, Paraburkholderia, Aeromonas, Vibrio and Acidovorax genera. Taking into account that plastics, including commonly produced PUs, are widespread in groundwater, identification of PUs-degrading bacteria may have potential applications in bioremediation of groundwater polluted with this polymer.
Subject(s)
Comamonadaceae , Groundwater , Humans , Polyurethanes , DNA, Ribosomal , Pseudomonas , SuppurationABSTRACT
Plastic pollution is an international environmental problem. Desire to act is shared from the public to policymakers, yet motivation and approaches are diverging. Public attention is directed to reducing plastic consumption, cleaning local environments, and engaging in citizen science initiatives. Policymakers and regulators are working on prevention and mitigation measures, while international, regional, and national bodies are defining monitoring recommendations. Research activities are focused on validating approaches to address goals and comparing methods. Policy and regulation are eager to act on plastic pollution, often asking questions researchers cannot answer with available methods. The purpose of monitoring will define which method is implemented. A clear and open dialogue between all actors is essential to facilitate communication on what is feasible with current methods, further research, and development needs. For example, some methods can already be used for international monitoring, yet limitations including target plastic types and sizes, sampling strategy, available infrastructure and analytical capacity, and harmonization of generated data remain. Time and resources to advance scientific understanding must be balanced against the need to answer pressing policy issues.
Subject(s)
Environmental Monitoring , Plastics , Environmental Monitoring/methods , Environmental PollutionABSTRACT
A reliable analytical method has been developed to quantify poly(vinyl chloride) (PVC) in environmental samples. Quantification was conducted via combustion ion chromatography (C-IC). Hydrogen chloride (HCl) was quantitatively released from PVC during thermal decomposition and trapped in an absorption solution. Selectivity of the marker HCl in complex environmental samples was ensured using cleanup via pressurized liquid extraction (PLE) with methanol at 100 °C (discarded) and tetrahydrofuran at 185 °C (collected). Using this method, recoveries of 85.5 ± 11.5% and a limit of quantification down to 8.3 µg/g were achieved. A variety of hard and soft PVC products could be successfully analyzed via C-IC with recoveries exceeding >95%. Furthermore, no measurable overdetermination was found for various organic and inorganic matrix ingredients, such as sodium chloride, sucralose, hydroxychloroquine, diclofenac, chloramphenicol, triclosan, or polychlorinated biphenyls. In addition, sediments and suspended particular matter showed PVC concentrations ranging up to 16.0 and 220 µg/g, respectively. However, the gap between determined polymer mass and particle masses could be significant since soft PVC products contain plasticizers up to 50 wt %. Hence, the results of the described method represent a sum of all chlorine-containing polymers, which are extractable under the chosen conditions.
Subject(s)
Plastics , Vinyl Chloride , Microplastics , Gas Chromatography-Mass Spectrometry , Plasticizers/chemistry , Polymers , Polyvinyl Chloride/chemistryABSTRACT
The present article critically and comprehensively reviews the most recent reports on smart sensors for determining glyphosate (GLP), an active agent of GLP-based herbicides (GBHs) traditionally used in agriculture over the past decades. Commercialized in 1974, GBHs have now reached 350 million hectares of crops in over 140 countries with an annual turnover of 11 billion USD worldwide. However, rolling exploitation of GLP and GBHs in the last decades has led to environmental pollution, animal intoxication, bacterial resistance, and sustained occupational exposure of the herbicide of farm and companies' workers. Intoxication with these herbicides dysregulates the microbiome-gut-brain axis, cholinergic neurotransmission, and endocrine system, causing paralytic ileus, hyperkalemia, oliguria, pulmonary edema, and cardiogenic shock. Precision agriculture, i.e., an (information technology)-enhanced approach to crop management, including a site-specific determination of agrochemicals, derives from the benefits of smart materials (SMs), data science, and nanosensors. Those typically feature fluorescent molecularly imprinted polymers or immunochemical aptamer artificial receptors integrated with electrochemical transducers. Fabricated as portable or wearable lab-on-chips, smartphones, and soft robotics and connected with SM-based devices that provide machine learning algorithms and online databases, they integrate, process, analyze, and interpret massive amounts of spatiotemporal data in a user-friendly and decision-making manner. Exploited for the ultrasensitive determination of toxins, including GLP, they will become practical tools in farmlands and point-of-care testing. Expectedly, smart sensors can be used for personalized diagnostics, real-time water, food, soil, and air quality monitoring, site-specific herbicide management, and crop control.
Subject(s)
Herbicides , Smart Materials , Animals , Conservation of Natural Resources , Plants, Genetically Modified , Agriculture , GlyphosateABSTRACT
Plastic is now considered part and parcel of daily life due to its extensive usage. Microplastic (MP) pollution is becoming a growing worry and has been ranked as the second most critical scientific problem in the realm of ecology and the environment. Microplastics are smaller in size than the plastic and are more harmful to biotic and as well as abiotic environments. The toxicity of microplastic depends upon its shape and size and increases with an increase in its adsorption capacity and their toxicity. The reason behind their harmful nature is their small size and their large surface area-to-volume ratio. Microplastic can get inside fruits, vegetables, seeds, roots, culms, and leaves. Hence microplastic enters into the food chain. There are different entry points for microplastic to enter into the food chain. Such sources can include polluted food, beverages, spices, plastic toys, and household (packing, cooking, etc.). The concentration of microplastic in terrestrial environments is increasing day by day. Microplastic causes the destruction of soil structure; destroys soil microbiota, cause depletion of nutrients in the soil, and their absorption by plants decreases plant growth. Apart from other environmental problems caused by microplastic, human health is also badly affected by microplastic pollution present in the terrestrial environment. The presence of microplastics in the human body has been confirmed. Microplastic enters into the body of humans in different possible ways. According to their way of entering the body, microplastics cause different diseases in humans. MPs also cause negative effects on the human endocrine system. At the ecosystem level, the impacts of microplastic are interconnected and can disrupt ecological processes. Although recently different papers have been published on several aspects of the microplastic present in the terrestrial environment but there is no complete overview that focus on the interrelationship of MPs in plants, and soil and their effect on higher animals like a human. This review provides a completely detailed overview of existing knowledge about sources, occurrences, transport, and effects of microplastic on the food chain and soil quality and their ecotoxicological effects on plants and humans.
Subject(s)
Microplastics , Water Pollutants, Chemical , Animals , Humans , Microplastics/toxicity , Plastics/toxicity , Ecosystem , Environmental Pollution , Soil , Plants , Environmental Monitoring , Water Pollutants, Chemical/analysisABSTRACT
BACKGROUND: Exceptional episodes of exposure to high levels of persistent organic pollutants have already been associated with developmental defects of enamel among children, but knowledge is still scarce concerning the contribution of background levels of environmental contamination. METHODS: Children of the French PELAGIE mother-child cohort were followed from birth, with collection of medical data and cord blood samples that were used to measure polychlorinated biphenyls (PCBs), organochlorine pesticides (OCs), and perfluorinated alkyl substances (PFASs). At 12 years of age, molar-incisor hypomineralization (MIH) and other enamel defects (EDs) were recorded for 498 children. Associations were studied using logistic regression models adjusted for potential prenatal confounders. RESULTS: An increasing log-concentration of ß-HCH was associated with a reduced risk of MIH and EDs (OR = 0.55; 95% CI, 0.32-0.95, and OR = 0.65; 95% CI, 0.43-0.98, respectively). Among girls, intermediate levels of p,p'-DDE were associated with a reduced risk of MIH. Among boys, we observed an increased risk of EDs in association with intermediate levels of PCB 138, PCB 153, PCB 187, and an increased risk of MIH with intermediate levels of PFOA and PFOS. CONCLUSIONS: Two OCs were associated with a reduced risk of dental defects, whereas the associations between PCBs and PFASs and EDs or MIH were generally close to null or sex-specific, with an increased risk of dental defects in boys. These results suggest that POPs could impact amelogenesis. Replication of this study is required and the possible underlying mechanisms need to be explored.
Subject(s)
Fluorocarbons , Molar Hypomineralization , Polychlorinated Biphenyls , Prenatal Exposure Delayed Effects , Male , Pregnancy , Female , Humans , Child , Persistent Organic Pollutants , Prenatal Exposure Delayed Effects/chemically induced , Prenatal Exposure Delayed Effects/epidemiology , Dichlorodiphenyl Dichloroethylene , Mother-Child Relations , PrevalenceABSTRACT
Microplastics and Nanoplastics (MNPLs) pollution has been recognized as the important environmental pollution caused by human activities in addition to global warming, ozone layer depletion and ocean acidification. Most of the current studies have focused on the toxic effects caused by plastics and have not actively investigated the mechanisms causing cell death, especially at the subcellular level. The main content of this paper focuses on two aspects, one is a review of the current status of MNPLs contamination and recent advances in toxicological studies, which highlights the possible concentration levels of MNPLs in the environment and the internal exposure of humans. It is also proposed to pay attention to the compound toxicity of MNPLs as carriers of other environmental pollutants and pathogenic factors. Secondly, subcellular toxicity is discussed and the modes of entry and intracellular distribution of smaller-size MNPLs are analyzed, with particular emphasis on the importance of organelle damage to elucidate the mechanism of toxicity. Importantly, MNPLs are a new type of environmental pollutant and researchers need to focus not only on their toxicity, but also work with governments to develop measures to reduce plastic emissions, optimize degradation and control plastic aggression against organisms, especially humans, from multiple perspectives.
Subject(s)
Environmental Pollutants , Water Pollutants, Chemical , Animals , Humans , Plastics/toxicity , Hydrogen-Ion Concentration , Seawater , Environmental Pollution , Microplastics/toxicity , Water Pollutants, Chemical/toxicity , Water Pollutants, Chemical/analysis , Environmental MonitoringABSTRACT
As microplastic pollution has become an emerging environmental issue of global concern, microplastics in aquaculture have become a research hotspot. For environmental safety, economic efficiency and food safety considerations, a comprehensive understanding of microplastic pollution in aquaculture is necessary. This review outlines an overview of sources and effects of microplastics in aquaculture. External environmental inputs and aquaculture processes are sources of microplastics in aquaculture. Microplastics may release harmful additives and adsorb pollutants in aquaculture environment, cause deterioration of aquaculture environment, as well as cause toxicological effects, affect the behavior, growth and reproduction of aquaculture products, ultimately reducing the economic benefits of aquaculture. Microplastics entering the human body through aquaculture products also pose potential health risks at multiple levels. Microplastic pollution removal strategies used in aquaculture in various countries are also reviewed. Ecological interception and purification are considered to be effective methods. In addition, strengthening aquaculture management and improving fishing gear and packaging are also currently feasible solutions. As proactive measures, new portable microplastic monitoring system and remote sensing technology are considered to have broad application prospects. And it was encouraged to comprehensively strengthen the supervision of microplastic pollution in aquaculture through talent exchange and strengthening the construction of laws and regulations.
Subject(s)
Microplastics , Water Pollutants, Chemical , Humans , Plastics , Water Pollutants, Chemical/analysis , Environmental Pollution/analysis , Aquaculture , Environmental Monitoring/methods , EcosystemABSTRACT
The effect of daily ingestion of polypropylene microplastic on the health of tilapia, Oreochromis niloticus, was evaluated. 60 fish (± 200 g) were placed in 6 aquariums (n = 10, 100 L each), constituting the following treatments: Control (without the addition of polymer), fed with 100 and 500 µg of polypropylene/kg of body weight (b.w.), respectively. After 30 days of feeding, the animals were submitted to blood collection for hemogram and biochemical study and later euthanized for gut microbiological analysis, somatic index of liver, spleen, heart, kidney, stomach, and intestine. In the serum biochemical study, an increase in cholesterol and serum Aspartate Aminotransferase (AST) activity levels was observed in animals treated with 500 µg of polypropylene. Tilapia-fed polypropylene in the diet showed an increase in thrombocyte and total leukocyte counts, marked by a significant increase in the number of circulating lymphocytes. The results of the somatic study revealed a significant increase in the stomach, liver, and heart of tilapia fed with the polymer. Increase in the number of Gram-negative microorganisms and decrease in mesophilic aerobic microorganisms were observed in the gut of fish exposed to the polymer, including a dose-response effect was observed for these analyses. Therefore, tilapias fed daily with diets containing polypropylene for 30 consecutive days showed deleterious effects, resulting in systemic inflammatory disturbs by altering liver functions, leukocyte profile, and organ morphometry, as well as changes in the intestinal microbiota. Such results demonstrate the impairment of fish health, highlighting the need for further studies that evaluate the impact of microplastics on aquatic organisms.
Subject(s)
Cichlids , Tilapia , Animals , Cichlids/physiology , Microplastics , Plastics , Polypropylenes/toxicity , Diet , Eating , Animal Feed/analysis , Dietary Supplements/analysisABSTRACT
Globally, abundant agricultural wastes (AWs) are being generated each day to fulfil the increasing demands of the fast-growing population. The limited and/or improper management of the same has created an urgent need to devise strategies for their timely utilization and valorisation, for agricultural sustainability and human-food and health security. The AWs are generated from different sources including crop residue, agro-industries, livestock, and aquaculture. The main component of the crop residue and agro-industrial waste is cellulose, (the most abundant biopolymer), followed by lignin and hemicellulose (lignocellulosic biomass). The AWs and their processing are a global issue since its vast majority is currently burned or buried in soil, causing pollution of air, water and global warming. Traditionally, some crop residues have been used in combustion, animal fodder, roof thatching, composting, soil mulching, matchsticks and paper production. But, lignocellulosic biomass can also serve as a sustainable source of biofuel (biodiesel, bioethanol, biogas, biohydrogen) and bioenergy in order to mitigate the fossil fuel shortage and climate change issues. Thus, valorisation of lignocellulosic residues has the potential to influence the bioeconomy by producing value-added products including biofertilizers, bio-bricks, bio-coal, bio-plastics, paper, biofuels, industrial enzymes, organic acids etc. This review encompasses circular bioeconomy based various AW management strategies, which involve 'reduction', 'reusing' and 'recycling' of AWs to boost sustainable agriculture and minimise environmental pollution.
Subject(s)
Composting , Waste Management , Agriculture , Animals , Biofuels , Biomass , LigninABSTRACT
In the more than 100 years since the invention of plastics, various plastic polymers have been developed that exhibit different characteristics and have been widely used in production and life. In 2020 alone, nearly 400 million tons of plastics were produced globally. However, while plastic such as polyethylene brings us convenience, it also threatens environmental sustainability and human health. Due to insufficient recycling efficiency, millions of tons of polyethylene pollutants accumulate in terrestrial or marine environments each year. Polyethylene is elastic, chemically stable, and non-biodegradable, and the traditional disposal methods include landfilling and incineration. These methods are costly, unsustainable, and further increase the burden on the environment. Therefore, recent research has increasingly focused on the biodegradation of polyethylene. In this work, we briefly summarized polyethylene's properties and environmental toxicity. We also reviewed the recent advances in the biodegradation of polyethylene with a summary of traditional abiotic methods. Finally, we proposed a brief research direction in polyethylene study with the aspect of environmental toxicology and industrial applications of decomposition technology.
Subject(s)
Environmental Pollutants , Polyethylene , Biodegradation, Environmental , Environmental Pollutants/chemistry , Environmental Pollutants/toxicity , Hazardous Substances , Humans , Plastics/chemistry , Polyethylene/metabolism , Polyethylene/toxicity , RecyclingABSTRACT
The rapid identification of beached marine micro-plastics is essential for the determination of the source of pollution and for planning the most effective strategies for remediation. In this paper, we present the results obtained by applying the laser-induced breakdown spectroscopy (LIBS) technique on a large sample of different kinds of plastics that can be found in a marine environment. The use of chemometric analytical tools allowed a rapid classification of the pellets with an accuracy greater than 80%. The LIBS spectrum and statistical tests proved their worth to quickly identify polymers, and in particular, to distinguish C-O from C-C backbone pellets, and PE from PP ones. In addition, the PCA analysis revealed a correlation between appearance (surface pellets roughness) and color (yellowing), as reported by other recent studies. The preliminary results on the analysis of metals accumulated on the surface of the pellets are also reported. The implication of these results is discussed in view of the possibility of frequent monitoring of the marine plastic pollution on the seacoast.
Subject(s)
Microplastics , Plastics , Environmental Monitoring/methods , Environmental Pollution/analysis , Lasers , Plastics/chemistry , Spectrum AnalysisABSTRACT
Litter pollution is a global concern, and identifying sources and pathways is crucial for proposing preventative actions. Existing models of plastic litter leakage to the environment have provided worldwide estimates at a country-based level, but only a few initiatives address subnational scales. Adding relevant parameters and improving models is needed to reduce the limitations of global estimates. However, availability of information, which varies among countries and is critical in the Global South, may preclude such improvements. To understand the potentialities and limitations of subnational estimates of plastic litter leakage to the environment, we reviewed the parameters used in the literature and addressed data usability, considering Brazil as a case study. We gathered data on parameters identified for all 5570 Brazilian municipalities and evaluated their usability considering reliability and temporal and geographic granularity. We identified 51 parameters that are either currently used in models or could improve estimates, including parameters regarding territory, population density, socioeconomic condition, and solid waste generation, composition, collection, and final destination, selective waste collection, recycling, and hydrology. Only 29.4% of parameters were linked to data sources with good or very good usability, while most of them presented average usability (45.1%) and 7.8% were not linked to any data source. This panorama of low data usability reveals uncertainties and explicit difficulties of estimating plastic litter leakage to the environment, including mobilization from the terrestrial environment to the ocean. The Brazilian scenario reflects current data availability conditions and the difficulties of countries in the Global South to robustly understand plastic litter leakage and face land-based sources of marine litter.
Subject(s)
Plastics , Solid Waste , Reproducibility of Results , Recycling , Environmental PollutionABSTRACT
A molecularly imprinting polymer (MIP) was synthesized for Basic Blue 3 dye and applied to wastewater for the adsorption of a target template. The MIPs were synthesized by bulk polymerization using methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA). Basic Blue 3 dye (BB-3), 2,2'-azobisisobutyronitrile (AIBN) and methanol were used as a functional monomer, cross linker, template, initiator and porogenic solvent, respectively, while non-imprinting polymers (NIP) were synthesized by the same procedure but without template molecules. The contact time was 25 min for the adsorption of BB-3 dye from 10 mL of spiked solution using 25 mg polymer. The adsorption of dye (BB-3) on the MIP followed the pseudo-second order kinetic (k2 = 0.0079 mg·g-1·min-1), and it was according to the Langmuir isotherm, with maximum adsorption capacities of 78.13, 85.4 and 99.0 mg·g-1 of the MIP at 283 K, 298 K and 313 K, respectively and 7 mg·g-1 for the NIP. The negative values of ΔG° indicate that the removal of dye by the molecularly imprinting polymer and non-imprinting polymer is spontaneous, and the positive values of ΔH° and ΔS° indicate that the process is endothermic and occurred with the increase of randomness. The selectivity of the MIP for BB-3 dye was investigated in the presence of structurally similar as well as different dyes, but the MIP showed higher selectivity than the NIP. The imprinted polymer showed 96% rebinding capacity at 313 K towards the template, and the calculated imprinted factor and Kd value were 10.73 and 2.62, respectively. In this work, the MIP showed a greater potential of selectivity for the template from wastewater relative to the closely similar compounds.
Subject(s)
Molecular Imprinting , Coloring Agents , Molecular Imprinting/methods , Oxazines , Polymers/chemistry , WastewaterABSTRACT
A novel molecularly imprinted polymer (MIP) has been developed based on a simple and sustainable strategy for the selective determination of citalopram (CTL) using screen-printed carbon electrodes (SPCEs). The MIP layer was prepared by electrochemical in situ polymerization of the 3-amino-4 hydroxybenzoic acid (AHBA) functional monomer and CTL as a template molecule. To simulate the polymerization mixture and predict the most suitable ratio between the template and functional monomer, computational studies, namely molecular dynamics (MD) simulations, were carried out. During the experimental preparation process, essential parameters controlling the performance of the MIP sensor, including CTL:AHBA concentration, number of polymerization cycles, and square wave voltammetry (SWV) frequency were investigated and optimized. The electrochemical characteristics of the prepared MIP sensor were evaluated by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Based on the optimal conditions, a linear electrochemical response of the sensor was obtained by SWV measurements from 0.1 to 1.25 µmol L-1 with a limit of detection (LOD) of 0.162 µmol L-1 (S/N = 3). Moreover, the MIP sensor revealed excellent CTL selectivity against very close analogues, as well as high imprinting factor of 22. Its applicability in spiked river water samples demonstrated its potential for adequate monitoring of CTL. This sensor offers a facile strategy to achieve portability while expressing a willingness to care for the environment.
Subject(s)
Molecular Imprinting , Molecularly Imprinted Polymers , Citalopram , Computer Simulation , Electrochemical Techniques/methods , Molecular Imprinting/methodsABSTRACT
Low-density polyethylene (LDPE) polymer is mainly used in the production of plastic bags and food packaging making up the largest volume of plastic pollutions. These polymers are potential substrates for bacteria in the bioremediation process. In this study, soil samples were collected from different plastic landfills in Iran and subsequently enriched in specific media (polyethylene as carbon source) to increase the population of LDPE-degrading bacteria. Seventeen PE-degrading bacteria, some novel, were isolated from Iranian soil samples and identified using 16S rDNA gene sequencing. These isolates were capable of degrading PE in a limited incubation period without the need for physicochemical pretreatments and comprise mostly of Actinobacteria which include the three genera of Streptomyces, Nocardia, and Rhodococcus. The isolates belonged to 17 different species of gram-positive Actinobacteria. In all, 11 species of the genus Streptomyces, 3 species of the genus Rhodococcus, and 3 species of the genus Nocardia were identified. The isolates with less than 99% 16S rRNA gene similarity to previously known species were suspected to be new species. Various analyses (weight loss, SEM, FTIR, and tensile strength test) to determine polyethylene biodegradation rate were carried out after a 60-day incubation period. Analysis of polyethylene biodegradation elucidates that Actinobacteria have a high ability for biodegradation of polyethylene-based plastics. Streptomyces sp. IR-SGS-T10 showed the highest reduction in weight of the LDPE film (1.58 mg/g/day) after 60 days of incubation without any pretreatments. Rhodococcus sp. IR-SGS-T11 shows the best reduction in the tensile property of LDPE film, while results from FTIR study for Streptomyces sp. IR-SGS-Y1 indicated a significant change in structural analysis.