Construction of Multi-Enzyme Integrated Catalysts for Deracemization of Cyclic Chiral Amines.

Multi-enzyme cascade catalysis has become an important technique for chemical reactions used in manufacturing and scientific study. In this research, we designed a four-enzyme integrated catalyst and used it to catalyse the deracemization reaction of cyclic chiral amines, where monoamine oxidase (MAO) catalyses the enantioselective oxidation of 1-methyl-1,2,3,4-tetrahydroisoquinoline (MTQ), imine reductase (IRED) catalyses the stereo selective reduction of 1-methyl-3,4-dihydroisoquinoline (MDQ), formate dehydrogenase (FDH) is used for the cyclic regeneration of cofactors, and catalase (CAT) is used for decomposition of oxidative reactions. The four enzymes were immobilized via polydopamine (PDA)-encapsulated dendritic organosilica nanoparticles (DONs) as carriers, resulting in the amphiphilic core-shell catalysts. The hydrophilic PDA shell ensures the dispersion of the catalyst in water, and the hydrophobic DON core creates a microenvironment with the spatial confinement effect of the organic substrate and the preconcentration effect to enhance the stability of the enzymes and the catalytic efficiency. The core-shell structure improves the stability and reusability of the catalyst and rationally arranges the position of different enzymes according to the reaction sequence to improve the cascade catalytic performance and cofactor recovery efficiency.

A Phosphoramidate Prodrug Platform: One-Pot Amine Functionalization of Kinase Inhibitors with Oligoethylene Glycol for Improved Water-Solubility.

Small molecular kinase inhibitors play a key role in modern cancer therapy. Protein kinases are essential mediators in the growth and progression of cancerous tumors, rendering involved kinases an increasingly important target for therapy. However, kinase inhibitors are almost insoluble in water because of their hydrophobic aromatic nature, often lowering their availability and pharmacological efficacy. Direct drug functionalization with polar groups represents a simple strategy to improve the drug solubility, availability, and performance. Here, we present a strategy to functionalize secondary amines with oligoethylene glycol (OEG) phosphate using a one-pot synthesis in three exemplary kinase inhibiting drugs Ceritinib, Crizotinib, and Palbociclib. These OEG-prodrug conjugates demonstrate superior solubility in water compared to the native drugs, with the solubility increasing up to 190-fold. The kinase inhibition potential is only slightly decreased for the conjugates compared to the native drugs. We further show pH dependent hydrolysis of the OEG-prodrugs which releases the native drug. We observe a slow release at pH 3, while the conjugates remain stable over 96 h under physiological conditions (pH 7.4). Using confocal microscopy, we verify improved cell uptake of the drug-OEG conjugates into the cytoplasm of HeLa cells, further supporting our universal solubility approach.

Reductive amination cascades in cell-free and resting whole cell formats for valorization of lignin deconstruction products.

The selective introduction of amine groups within deconstruction products of lignin could provide an avenue for valorizing waste biomass while achieving a green synthesis of industrially relevant building blocks from sustainable sources. Here, we built and characterized enzyme cascades that create aldehydes and subsequently primary amines from diverse lignin-derived carboxylic acids using a carboxylic acid reductase (CAR) and an ω-transaminase (TA). Unlike previous studies that have paired CAR and TA enzymes, here we examine multiple homologs of each of these enzymes and a broader set of candidate substrates. In addition, we compare the performance of these systems in cell-free and resting whole-cell biocatalysis formats using the conversion of vanillate to vanillyl amine as model chemistry. We also demonstrate that resting whole cells can be recycled for multiple batch reactions. We used the knowledge gained from this study to produce several amines from carboxylic acid precursors using one-pot biocatalytic reactions, several of which we report for the first time. These results expand our knowledge of these industrially relevant enzyme families to new substrates and contexts for environmentally friendly and potentially low-cost synthesis of diverse aryl aldehydes and amines.

A Facile and Green Approach for the Preparation of Amine-Functionalized Poly(ethylene glycol) by Reducing Poly(ethylene glycol) Azide with Dithiothreitol.

A facile and green approach for the preparation of PEGn-NH2s from PEGn-N3s in water with DTT as the reduction reagent has been developed, avoiding the introduction of metal ions and difficulties in purification compared to the traditional synthesis process of PEGn-NH2s. A series of high-purity linear and multiarm PEGn-NH2s with different molecular weights were synthesized, demonstrating the versatility of this method. Additionally, HS-PEG45-NH2 with high fidelity of thiol and amine was easily prepared through the one-step two functional group conversion of N3-PEG45-S-S-PEG45-N3, and the PEG-based NH2-PEG@AuNPs were also prepared. This technology will promote the application of PEGn-NH2s in the fields of medicine and biomaterials.

Degradable Polymer-Based Nanoassemblies for Precise Targeting and Drug Delivery to Breast Cancer Cells without Affecting Normal Healthy Cells.

Stimuli-responsive amphiphilic polymers are known to be precursors to forming promising nanoarchitectonics with tunable properties for application in biomedical sciences. Currently, self-immolative polymers are widely recognized as an emerging class of responsive materials with excellent degradability, which is one of the crucial criteria for designing a robust drug delivery vehicle. Here, we design an amphiphilic polyurethane endowed with a redox-responsive self-immolative linker and a pH-responsive tertiary amine on the backbone, which forms entropy-driven nanoscale supramolecular assemblies (average hydrodynamic diameter ∼110 nm) and is programmed to disassemble in a redox environment (GSH) due to the degradation of the polymer in a self-immolative fashion. The nanoassembly shows efficient drug sequestration and release in a controlled manner in response to glutathione (10 mM). The tertiary amine residing on the surface of the nanoassembly becomes protonated in the tumor microenvironment (pH ∼ 6.4-6.8) and generates positively charged nanoassembly (ζ-potential = +36 mV), which enhances the cancer cell-selective cellular uptake. The biological evaluation of the drug-loaded nanoassembly revealed triple-negative breast cancer (MDAMB-231) selective internalization and cell death while shielding normal cells (RBCs or PBMCs) from off-targeting toxicity. We envision that polyurethane with a redox-responsive self-immolative linker might open up new opportunities for a completely degradable polyurethane-based nanocarrier for drug delivery and diagnosis applications.

Tolterodine Tartrate Loaded Cationic Elastic Liposomes for Transdermal Delivery: In Vitro, Ex Vivo, and In Vivo Evaluations.

OBJECTIVE: Tolterodine tartrate (TOTA) is a first-line therapy to treat overactive urinary bladder (OAB). Oral delivery causes high hepatic clearance, xerostomia, headache, constipation, and blurred vision. We addressed Hansen solubility parameter (HSP) and Design Expert oriented optimized cationic elastic liposomes for transdermal application. METHODS: The experimental solubility was conducted in HSPiP predicted excipients to tailor formulations using surfactants, stearylamine, ethanol, and phosphatidylcholine (PC). These were evaluated for formulation characteristics. The optimized OTEL1 and OTEL1-G (gel) were compared against the drug solution (DS) and liposomes. In vitro and ex vivo studies were accomplished to investigate the insights into the mechanistic understanding of TOTA release and permeation ability. Finally, confocal laser scanning microscopy (CLSM) supported ex vivo results. RESULTS: HSP values of TOTA were closely related to tween-80, stearylamine, and human's skin. The size (153 nm), %EE (87.6%), and PDI (0.25) values of OTEL1 were in good agreement to the predicted values (161 nm, 80.4%, and 0.31) with high desirability (0.963). Spherical and smooth OTEL1 (including OTEL1-G and liposomes) vesicles followed non-Fickian drug release as compared to DS (Fickian) as evidence with n > 0.5 (Korsmeyer and Peppas coefficient). OTEL1 (containing lipid and surfactant as 90 mg and 13.8 mg, respectively) exhibited 2.6 and 1.8-folds higher permeation flux than DS and liposomes, respectively. Biocompatible cationic OTEL1 was safe and non-hemolytic. CONCLUSIONS: OTEL1 was promised as a lead vesicular approach and an alternative to conventional oral therapy to treat OAB in children and advanced age patients.

Molecular Design of Functional Polymers for Silica Scale Inhibition.

Silica polymerization, which involves the condensation reaction of silicic acid, is a fundamental process with wide-ranging implications in biological systems, material synthesis, and scale formation. The formation of a silica-based scale poses significant technological challenges to energy-efficient operations in various industrial processes, including heat exchangers and water treatment membranes. Despite the common strategy of applying functional polymers for inhibiting silica polymerization, the underlying mechanisms of inhibition remain elusive. In this study, we synthesized a series of nitrogen-containing polymers as silica inhibitors and elucidated the role of their molecular structures in stabilizing silicic acids. Polymers with both charged amine and uncharged amide groups in their backbones exhibit superior inhibition performance, retaining up to 430 ppm of reactive silica intact for 8 h under neutral pH conditions. In contrast, monomers of these amine/amide-containing polymers as well as polymers containing only amine or amide functionalities present insignificant inhibition. Molecular dynamics simulations reveal strong binding between the deprotonated silicic acid and a polymer when the amine groups in the polymer are protonated. Notably, an extended chain conformation of the polymer is crucial to prevent proximity between the interacting monomeric silica species, thereby facilitating effective silica inhibition. Furthermore, the hydrophobic nature of alkyl segments in polymer chains disrupts the hydration shell around the polymer, resulting in enhanced binding with ionized silicic acid precursors compared to monomers. Our findings provide novel mechanistic insights into the stabilization of silicic acids with functional polymers, highlighting the molecular design principles of effective inhibitors for silica polymerization.

Low-Migration Compounds with Amine Functionality as Coinitiators of Radical Polymerization.

The utilization of two-component systems comprising camphorquinone (CQ) and aromatic amines has become prevalent in the photopolymerization. However, there are still concerns about the safety of this CQ/amine system, mainly because of the toxicity associated with the leaching of aromatic amines. In light of these concerns, this study aims to develop novel coinitiator combinations featuring CQ and amines which cannot be leached out of materials, enabling free radical polymerization of representative dentalmethacrylate resins under blue light irradiation. This approach involves the initial design and analysis of hydrogen donors with low C─H bond dissociation energy through molecular modeling. Subsequently, copolymerizable methacrylate functional groups are incorporated via chemical modification, allowing it to act as both coinitiator and copolymerization monomer to achieve low migrationand leachability properties. This work presents, for the first time, the synthesis of the innovative coinitiator and compares its performance with the benchmark CQ/ethyl-4-dimethylaminobenzoate (EDB)-based photoinitiation system (PIS). The results demonstrate the effectiveness of the newly proposed PIS. Finally, an in-depth investigation is conducted into the reaction mechanism associated with this PIS through molecular orbital calculations and electron spin resonance studies.

Effects of Structurally Different Tertiary Amines on the Properties of Quaternized Anionic Exchange Membranes Potentially Applicable for Water Electrolysis.

In this work, two structurally different monoamines (trimethylamine [TMA] and N-methylpiperidine [N-MPip]) are used for the amination of a g-VBC-15 graft copolymer, obtained by the functionalization of a mechanically robust, commercially available styrene-butadiene block copolymer (SB) with vinylbenzyl chloride (VBC) via solution free-radical polymerization. Results demonstrate that g-VBC-15-based membranes quaternized with TMA have superior electrochemical performance than N-MPip counterparts; while, the mechanical properties are good and only slightly inferior to those of N-MPip. Therefore, TMA is the selected monoamine to be alternatively mixed with two polyamines (tetramethyl-1,3-propanediamine [TMPDA] and N,N,N',N'',N''-pentamethyldiethylenetriamine [PMDETA]) into different proportions, in order to modulate the average functionality of the amination mixture in terms of number of amine functional groups available for the quaternization reaction of the membranes. g-VBC-15-based membranes derived therefrom are extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. Results indicate that membranes quaternized with a TMA/PMDETA mixture (90:10 in mole) display the highest conductivity among all the investigated membranes aminated with polyamine-based mixtures. Moreover, they have comparable mechanical and electrochemical properties to those quaternized with TMA, while exhibiting a reduced water uptake.

Development of modular polymeric nanoparticles for drug delivery using amine reactive chemistry.

Curcumin has been explored for its anti-cancer potential, but is severely limited by its hydrophobicity and sensitivity to light and water. In this study, poly (lactic-co-glycolic) acid (PLGA) nanoparticles (NPs) were synthesized to encapsulate curcumin via single emulsion method to improve curcumin stability and bioavailability. The PLGA NPs were coated with oligomeric chitosan (COS) and RGD peptide (a peptide consisting of Arg-Gly-Asp) using amine-reactive chemistry (NHS and EDC). Both COS and RGD had been previously shown to accumulate and target many different types of cancer cells. NPs were characterised based on size distribution, zeta potential, and binding efficiency of RGD peptide. They were also evaluated on encapsulation efficiency, and stability, of curcumin within the NPs. OVCAR-3 cancer cells were treated with COS and RGD-coated PLGA NPs loaded with Coumarin-6 dye for fluorescent imaging of cell uptake. They were also treated with curcumin-loaded NPs to determine cytotoxicity and effectiveness of delivery. The NPs exhibited size distribution and zeta potential within expected values, though binding efficiency of RGD was low. Curcumin-loaded NPs showed significant increase in cytotoxicity over free (unencapsulated) curcumin, and void (empty) NPs, suggesting successful delivery of curcumin as an anti-cancer agent; the performance of COS and RGD coated NPs over bare PLGA NPs was inconclusive, however, optimization will be required to improve formulation during the coating steps. This method of NP synthesis serves as proof of concept for a modular solution to the development of various coated polymeric NPs for other drugs or applications.

Efficient recycling pathway of bio-based composite polyurethane foams via sustainable diamine.

Aminolysis is widely recognized as a valuable chemical route for depolymerizing polymeric materials containing ester, amide, or urethane functional groups, including polyurethane foams. Bio-based polyurethane foams, pristine and reinforced with 40 wt% of sustainable fillers, were depolymerized in the presence of bio-derived butane-1,4-diamine, BDA. A process comparison was made using fossil-derived ethane-1,2-diamine, EDA, by varying amine/polyurethane ratio (F/A, 1:1 and 1:0.6). The obtained depolymerized systems were analyzed by FTIR and NMR characterizations to understand the effect of both diamines on the degradation pathway. The use of bio-based BDA seemed to be more effective with respect to conventional EDA, owing to its stronger basicity (and thus higher nucleophilicity), corresponding to faster depolymerization rates. BDA-based depolymerized systems were then employed to prepare second-generation bio-based composite polyurethane foams by partial replacement of isocyanate components (20 wt%). The morphological, mechanical, and thermal conductivity properties of the second-generation polyurethane foams were evaluated. The best performances (σ10 %=71 ± 9 kPa, λ = 0.042 ± 0.015 W∙ m-1 ∙K-1) were attained by employing the lowest F/A ratio (1:0.6); this demonstrates their potential application in different sectors such as packaging or construction, fulfilling the paradigm of the circular economy.

Carboxymethyl chitosan and octadecylamine-coated liposome-containing WPTS: design, optimization, and evaluation.

Liposomes (LPs) are a delivery system for stabilizing pharmaceuticals with limited use due to their propensity to congregate and fuse. A proposed method of addressing these problems is polymer coating. In this study, the potential of octadecylamine (ODA)-coated liposomes and carboxymethyl chitosan (CMCS/ODA-LPs) for enhancing Wacao pentacyclic triterpene saponin (WPTS) transport capacity was investigated. CMCS/ODA-LPs were produced by electrostatic adsorption and thin-film hydration. Response surface methodology (RSM) was employed to enhance the process and encapsulation efficiency (EE) for optimum drug encapsulation efficiency. The synthesized WPTS-CMCS/ODA-LPs were uniformly dispersed in a circular shape, and during 14 days of storage at 4 °C, the particle size and morphology did not significantly change. Vesicle size, zeta potential, polydispersity index (PDI), and entrapment efficiency (%) were 179.1 ± 7.31 nm, -29.6 ± 1.35 mV, 0.188 ± 0.052, and 75.62 ± 0.43, respectively. The hemolysis test revealed that WPTS-CMCS/ODA-LPs were sufficiently biocompatible. Compared to WPTS-LPs, WPTS-CMCS/ODA-LPs consistently showed a much more significant cytotoxic effect on cancer cells. Early and WPTS-CMCS/ODA-LPs-induced apoptosis resulted in almost seven times more cell death than the control. Compared to physiological pH 7.3, the pH-sensitive CMCS coupled LPs increased drug release at acidic pH 6.5. These findings suggest the efficacy of pH-sensitive CMCS/ODA-LPs as a medication delivery method for WPTS.

Synthesis and Characterization of Amine and Aldehyde-Containing Copolymers for Enzymatic Crosslinking of Gelatine.

In tissue engineering (TE), the support structure (scaffold) plays a key role necessary for cell adhesion and proliferation. The protein constituents of the extracellular matrix (ECM), such as collagen, its derivative gelatine, and elastin, are the most attractive materials as possible scaffolds. To improve the modest mechanical properties of gelatine, a strategy consists of crosslinking it, as naturally occurs for collagen, which is stiffened by the oxidative action of lysyl oxidase (LO). Here, a novel protocol to crosslink gelatine has been developed, not using the commonly employed crosslinkers, but based on the formation of imine bonds or on aldolic condensation reactions occurring between gelatine and properly synthesized copolymers containing amine residues via LO-mediated oxidation. Particularly, we first synthesized and characterized an amino butyl styrene monomer (5), its copolymers with dimethylacrylamide (DMAA), and its terpolymer with DMAA and acrylic acid (AA). Three acryloyl amidoamine monomers (11a-c) and their copolymers with DMAA were then prepared. A methacrolein (MA)/DMAA copolymer already possessing the needed aldehyde groups was finally developed to investigate the relevance of LO in the crosslinking process. Oxidation tests of amine copolymers with LO were performed to identify the best substrates to be used in experiments of gelatine reticulation. Copolymers obtained with 5, 11b, and 11c were excellent substrates for LO and were employed with MA/DMAA copolymers in gelatine crosslinking tests in different conditions. Among the amine-containing copolymers, that obtained with 5 (CP5/DMMA-43.1) afforded a material (M21) with the highest crosslinking percentage (71%). Cytotoxicity experiments carried out on two cell lines (IMR-32 and SH SY5Y) with the analogous (P5) of the synthetic constituent of M21 (CP5/DMAA) had evidenced no significant reduction in cell viability, but proliferation promotion, thus establishing the biocompatibility of M21 and the possibility to develop it as a new scaffold for TE, upon further investigations.

Amine Switchable Hydrophilic Solvent Vortex-Assisted Homogeneous Liquid-Liquid Microextraction and GC-MS for the Enrichment and Determination of 2, 6-DIPA Additive in Biodegradable Film.

2, 6-diisopropylaniline (2, 6-DIPA) is a crucial non-intentionally organic additive that allows the assessment of the production processes, formulation qualities, and performance variations in biodegradable mulching film. Moreover, its release into the environment may have certain effects on human health. Hence, this study developed simultaneous heating hydrolysis-extraction and amine switchable hydrophilic solvent vortex-assisted homogeneous liquid-liquid microextraction for the gas chromatography-mass spectrometry analysis of the 2, 6-DIPA additive and its corresponding isocyanates in poly(butylene adipate-co-terephthalate) (PBAT) biodegradable agricultural mulching films. The heating hydrolysis-extraction conditions and factors influencing the efficiency of homogeneous liquid-liquid microextraction, such as the type and volume of amine, homogeneous-phase and phase separation transition pH, and extraction time were investigated and optimized. The optimum heating hydrolysis-extraction conditions were found to be a H2SO4 concentration of 2.5 M, heating temperature of 87.8 °C, and hydrolysis-extraction time of 3.0 h. As a switchable hydrophilic solvent, dipropylamine does not require a dispersant. Vortex assistance is helpful to speed up the extraction. Under the optimum experimental conditions, this method exhibits a better linearity (0.0144~7.200 µg mL-1 with R = 0.9986), low limit of detection and quantification (0.0033 µg g-1 and 0.0103 µg g-1), high extraction recovery (92.5~105.4%), desirable intra- and inter-day precision (relative standard deviation less than 4.1% and 4.7%), and high enrichment factor (90.9). Finally, this method was successfully applied to detect the content of the additive 2, 6-DIPA in PBAT biodegradable agricultural mulching films, thus facilitating production process monitoring or safety assessments.

Dual-Functionalized Mesoporous Silica Nanoparticles for Celecoxib Delivery: Amine Grafting and Imidazolyl PEI Gatekeepers for Enhanced Loading and Controlled Release with Reduced Toxicity.

The development of targeted drug delivery systems has been a pivotal area in nanomedicine, addressing challenges like low drug loading capacity, uncontrolled release, and systemic toxicity. This study aims to develop and evaluate dual-functionalized mesoporous silica nanoparticles (MSN) for targeted delivery of celecoxib, enhancing drug loading, achieving controlled release, and reducing systemic toxicity through amine grafting and imidazolyl polyethyleneimine (PEI) gatekeepers. MSN were synthesized using the sol-gel method and functionalized with (3-aminopropyl) triethoxysilane (APTES) to create amine-grafted MSN (MSN-NH2). Celecoxib was loaded into MSN-NH2, followed by conjugation of imidazole-functionalized PEI (IP) gatekeepers synthesized via carbodiimide coupling. Characterization was conducted using Fourier-transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H-NMR). Drug loading capacity, entrapment efficiency, and in vitro drug release at pH 5.5 and 7.4 were evaluated. Cytotoxicity was assessed using the MTT assay on RAW 264.7 macrophages. The synthesized IP was confirmed by FTIR and 1H-NMR. Amine-grafted MSN demonstrated a celecoxib loading capacity of 12.91 ± 2.02%, 2.1 times higher than non-functionalized MSN. In vitro release studies showed pH-responsive behavior with significantly higher celecoxib release from MSN-NH2-celecoxib-IP at pH 5.5 compared to pH 7.4, achieving a 33% increase in release rate within 2 h. Cytotoxicity tests indicated significantly higher cell viability for IP-treated cells compared to PEI-treated cells, confirming reduced toxicity. The dual-functionalization of MSN with amine grafting and imidazolyl PEI gatekeepers enhances celecoxib loading and provides controlled pH-responsive drug release while reducing systemic toxicity. These findings highlight the potential of this advanced drug delivery system for targeted anti-inflammatory and anticancer therapies.

In Situ Preparation of Chlorine-Regenerable Antimicrobial Polymer Molecular Sieve Membranes.

Microbial contamination has profoundly impacted human health, and the effective eradication of widespread microbial issues is essential for addressing serious hygiene concerns. Taking polystyrene (PS) membrane as an example, we herein developed report a robust strategy for the in situ preparation of chlorine-regenerable antimicrobial polymer molecular sieve membranes through combining post-crosslinking and nucleophilic substitution reaction. The cross-linking PS membranes underwent a reaction with 5,5-dimethylhydantoin (DMH), leading to the formation of polymeric N-halamine precursors (PS-DMH). These hydantoinyl groups within PS-DMH were then efficiently converted into biocidal N-halamine structures (PS-DMH-Cl) via a simple chlorination process. ATR-FTIR and XPS spectra were recorded to confirm the chemical composition of the as-prepared PS-DMH-Cl membranes. SEM analyses revealed that the chlorinated PS-DMH-Cl membranes displayed a rough surface with a multitude of humps. The effect of chlorination temperature and time on the oxidative chlorine content in the PS-DMH-Cl membranes was systematically studied. The antimicrobial assays demonstrated that the PS-DMH-Cl membranes could achieve a 6-log inactivation of E. coli and S. aureus within just 4 min of contact time. Additionally, the resulting PS-DMH-Cl membranes exhibited excellent stability and regenerability of the oxidative chlorine content.

Casein-based conjugates and graft copolymers. Synthesis, properties, and applications.

Biobased natural polymers, including polymers of natural origin such as casein, are growing rapidly in the light of the environmental pollution caused by many mass-produced commercial synthetic polymers. Although casein has interesting intrinsic properties, especially for the food industry, numerous chemical reactions have been carried out to broaden the range of its properties, most of them preserving casein's nontoxicity and biodegradability. New conjugates and graft copolymers have been developed especially by Maillard reaction of the amine functions of the casein backbone with the aldehyde functions of sugars, polysaccharides, or other molecules. Carried out with dialdehydes, these reactions lead to the cross-linking of casein giving three-dimensional polymers. Acylation and polymerization of various monomers initiated by amine functions are also described. Other reactions, far less numerous, involve alcohol and carboxylic acid functions in casein. This review provides an overview of casein-based conjugates and graft copolymers, their properties, and potential applications.

Automotive Technology Revolutionized Restorative Dentistry Discovery of Alpha-diketone/Amine Catalyst: Part II -Reflections on Photopolymerization from Conception to Development of Composite Resin and Activator Light.

A full account of the preceded early research tribulation that led to the development of the first visible light activated composite resin and the first visible light activator source is documented. The events took place over four years since early 1974 when a raw industrial composite resin that was radiolucent, stiff paste, universal optically opaque white color, polymerized by exposure to a prototype visible light for 120 seconds was given to developed. Four years later, the developed restorative composite resin ended up as a radiopaque, optically translucent, universal color with an additional three shades that possessed the biologic, esthetic, mechanical and physical characteristics with proven efficacy be used for esthetic zone. This conservative account of early development of a technology that must count as one of a small number of inventions during the seventies, over the years has revolutionized restorative dental practice. We were privileged and very lucky to be associated with developmental stages, stumbling blocks, and final success of the first LC Composite resin that ignited the thought process worldwide and laid the foundation for modern esthetic restoratives practiced today.

Automotive Technology Revolutionized Restorative Dentistry Discovery of Alpha-diketone/Amine Catalyst: Part I.

A full account of early research that led to the discovery of the Alpha-diketone and Amine systems by two Imperial Chemical Industries (ICI) researchers. UK Chemists in the mid-sixties marked the beginning in the early development of a composite resin cured with visible light spectrum into a solid mass. Its incorporation into the newly developed Urethane based resin, led to conceiving the idea of developing the first light-activated restorative composite resin, which formed the prototype of modern composite restorative materials. How all that came about, and the ideas that were conceived and pursued in the development of these systems are discussed in detail.

Polymerizable 2-Propionic-3-methylmaleic Anhydrides as a Macromolecular Carrier Platform for pH-Responsive Immunodrug Delivery.

The design of functional polymers coupled with stimuli-triggered drug release mechanisms is a promising achievement to overcome various biological barriers. pH trigger methods yield significant potential for controlled targeting and release of therapeutics due to their simplicity and relevance, especially upon cell internalization. Here, we introduce reactive polymers that conjugate primary or secondary amines and release potential drugs under acidic conditions. For that purpose, we introduced methacrylamide-based monomers with pendant 2-propionic-3-methylmaleic anhydride groups. Such groups allow the conjugation of primary and secondary amines but are resistant to radical polymerization conditions. We, therefore, polymerized 2-propionic-3-methylmaleic anhydride amide-based methacrylates via reversible addition-fragmentation chain transfer (RAFT) polymerization. Their amine-reactive anhydrides could sequentially be derivatized by primary or secondary amines into hydrophilic polymers. Acidic pH-triggered drug release from the polymeric systems was fine-tuned by comparing different amines. Thereby, the conjugation of primary amines led to the formation of irreversible imide bonds in dimethyl sulfoxide, while secondary amines could quantitatively be released upon acidification. In vitro, this installed pH-responsiveness can contribute to an effective release of conjugated immune stimulatory drugs under endosomal pH conditions. Interestingly, the amine-modified polymers generally showed no toxicity and a high cellular uptake. Furthermore, secondary amine-modified immune stimulatory drugs conjugated to the polymers yielded better receptor activity and immune cell maturation than their primary amine derivatives due to their pH-sensitive drug release mechanism. Consequently, 2-propionic-3-methylmaleic anhydride-based polymers can be considered as a versatile platform for pH-triggered delivery of various (immuno)drugs, thus enabling new strategies in macromolecule-assisted immunotherapy.