Molecularly imprinted polymers for selective extraction/microextraction of cancer biomarkers: A review.

Over recent years, great efforts have been extensively documented in top scientific journals on the development of methods for early diagnosis, treatment, and monitoring of cancers which are prevalent critical diseases with a high mortality rate among men and women. The determination of cancer biomarkers using different optimum methodologies is one of the finest options for achieving these goals with more precision, speed, and at a lower cost than traditional clinical procedures. In this regard, while focusing on specific biomarkers, molecularly imprinted technology has enabled novel diagnostic techniques for a variety of diseases. Due to the well-known advantages of molecularly imprinted polymers (MIPs), this review focuses on the current trends of MIPs-based extraction/microextraction methods, specifically targeting cancer biomarkers from various matrices. These optimized methods have demonstrated high selectivity, accuracy, sorbent reusability, extraction recovery, and low limits of detection and quantification for a variety of cancer biomarkers, which are a powerful tool to provide early diagnosis, prognosis, and treatment monitoring, with potential clinical application expected soon. This review highlights the key progress, specific modifications, and strategies used for MIP synthesis. The future perspectives for cancer biomarkers purification and determination by fabricating MIP-based techniques are also discussed.

Functionalized graphene oxide tablets for sample preparation of drugs in biological fluids: Extraction of ritonavir, a HIV protease inhibitor, from human saliva and plasma using LC-MS/MS.

In this work, graphene oxide-based tablets (GO-Tabs) were prepared by applying a thin layer of functionalized GO on a polyethylene substrate. The GO was functionalized with amine groups (-NH2 ) by poly(ethylene glycol)bis(3-aminopropyl) terminated (GO-NH2 -PEG-NH2 ). The functionalized GO-Tabs were used for the extraction of ritonavir (RTV) in human saliva samples. RTV in plasma and saliva samples was analyzed using LC-MS/MS. Gradient LC system with MS/MS in the positive-ion mode [electrospray ionization (ESI+)] was used. The transitions m/z 721 → 269.0 and m/z 614 → 421 were used for RTV and the internal standard indinavir, respectively. This study determined the human immunodeficiency virus protease inhibitor RTV in human saliva samples using functionalized GO-Tab and LC-MS/MS, and the method was validated. The standard calibration curve for plasma and saliva samples was constructed from 5.0 to 2000 nmol L-1 . The limit of detection was 0.1 nmol L-1 , and the limit of quantification was 5.0 nmol L-1 in both plasma and saliva matrices. The intra- and inter-assay precision values were found to be between 1.5 and 5.8%, and the accuracy values ranged from 88.0 to 108% utilizing saliva and plasma samples. The extraction recovery was more than 80%, and the presented functionalized GO-Tabs could be reused for more than 10 extractions without deterioration in recovery.

Recent Applications of Molecularly Imprinted Sol-Gel Methodology in Sample Preparation.

Due to their selectivity and chemical stability, molecularly imprinted polymers have attracted great interest in sample preparation. Imprinted polymers have been applied for the extraction and the enrichment of different sorts of trace analytes in biological and environmental samples before their analysis. Additionally, MIPs are utilized in various sample preparation techniques such as SPE, SPME, SBSE and MEPS. Nevertheless, molecularly imprinted polymers suffer from thermal (stable only up to 150 °C) and mechanical stability issues, improper porosity and poor capacity. The sol-gel methodology as a promising alternative to address these limitations allowing the production of sorbents with controlled porosity and higher surface area. Thus the combination of molecularly imprinted technology and sol-gel technology can create influential materials with high selectivity, high capacity and high thermal stability. This work aims to present an overview of molecularly imprinted sol-gel polymerization methods and their applications in analytical and bioanalytical fields.

Graphene Oxide Tablets for Sample Preparation of Drugs in Biological Fluids: Determination of Omeprazole in Human Saliva for Liquid Chromatography Tandem Mass Spectrometry.

In this study, a novel sort of sample preparation sorbent was developed, by preparing thin layer graphene oxide tablets (GO-Tabs) utilizing a mixture of graphene oxide and polyethylene glycol on a polyethylene substrate. The GO-Tabs were used for extraction and concentration of omeprazole (OME) in human saliva samples. The determination of OME was carried out using liquid chromatography-tandem mass spectrometry (LC⁻MS/MS) under gradient LC conditions and in the positive ion mode (ESI+) with mass transitions of m/z 346.3→198.0 for OME and m/z 369.98→252.0 for the internal standard. Standard calibration for the saliva samples was in the range of 2.0⁻2000 nmol L-1. Limits of detection and quantification were 0.05 and 2.0 nmol L-1, respectively. Method validation showed good method accuracy and precision; the inter-day precision values ranged from 5.7 to 8.3 (%RSD), and the accuracy of determinations varied from -11.8% to 13.3% (% deviation from nominal values). The extraction recovery was 60%, and GO-Tabs could be re-used for more than ten extractions without deterioration in recovery. In this study, the determination of OME in real human saliva samples using GO-Tab extraction was validated.

Graphene Oxide/Polyethylene Glycol-Stick for Thin Film Microextraction of ß-Blockers from Human Oral Fluid by Liquid Chromatography-Tandem Mass Spectrometry.

A wooden stick coated with a novel graphene-based nanocomposite (Graphene oxide/polyethylene glycol (GO/PEG)) is introduced and investigated for its efficacy in solid phase microextraction techniques. The GO/PEG-stick was prepared and subsequently applied for the extraction of ß-blockers, acebutolol, and metoprolol in human oral fluid samples, which were subsequently detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). Experimental parameters affecting the extraction protocol including sample pH, extraction time, desorption time, appropriate desorption solvent, and salt addition were optimized. Method validation for the detection from oral fluid samples was performed following FDA (Food and Drug Administration) guidelines on bioanalytical method validation. Calibration curves ranging from 5.0 to 2000 nmol L-1 for acebutolol and 25.0 to 2000 nmol L-1 for metoprolol were used. The values for the coefficient of determination (R2) were found to be 0.998 and 0.996 (n = 3) for acebutolol and metoprolol, respectively. The recovery of analytes during extraction was 80.0% for acebutolol and 62.0% for metoprolol, respectively. The limit of detections (LODs) were 1.25, 8.00 nmol L-1 for acebutolol and metoprolol and the lower limit of quantifications (LLOQ) were 5.00 nmol L-1 for acebutolol and 25.0 nmol L-1 for metoprolol. Validation experiments conducted with quality control (QC) samples demonstrated method accuracy between 80.0% to 97.0% for acebutolol and from 95.0% to 109.0% for metoprolol. The inter-day precision for QC samples ranged from 3.6% to 12.9% for acebutolol and 9.5% to 11.3% for metoprolol. Additionally, the GO/PEG-stick was demonstrated to be reusable, with the same stick observed to be viable for more than 10 extractions from oral fluid samples.

Determination of metoprolol enantiomers in human plasma and saliva samples utilizing microextraction by packed sorbent and liquid chromatography-tandem mass spectrometry.

A sensitive, accurate and reliable bioanalytical method for the enantioselective determination of metoprolol in plasma and saliva samples utilizing liquid chromatography-electrospray ionization tandem mass spectrometry was developed and validated. Human plasma and saliva samples were pretreated by microextraction by packed sorbent (MEPS) prior to analysis. A new MEPS syringe form with two inputs was used. Metoprolol enantiomers and internal standard pentycaine (IS) were eluted from MEPS sorbent using isopropanol after removal of matrix interferences using aliquots of 5% methanol in water. Complete separation of metoprolol enantiomers was achieved on a Cellulose-SB column (150 × 4.6 mm, 5 µm) using isocratic elution with mobile phase 0.1% ammonium hydroxide in hexane-isopropanol (80:20, v/v) with a flow rate of 0.8 mL/min. A post-column solvent-assisted ionization was applied to enhance metoprolol ionization signal in positive mode monitoring (+ES) using 0.5% formic acid in isopropanol at a flow rate of 0.2 mL/min. The total chromatographic run time was 10 min for each injection. The detection of metoprolol in plasma and saliva samples was performed using triple quadrupole tandem mass spectrometer in +ES under the following mass transitions: m/z 268.08 → 72.09 for metoprolol and m/z 303.3 → 154.3 for IS. The linearity range was 2.5-500 ng/mL for both R- and S-metoprolol in plasma and saliva. The limits of detection and quantitation for both enantiomers were 0.5 and 2.5 ng/mL respectively, in both matrices (plasma and saliva). The intra- and inter-day precisions were presented in terms of RSD values for replicate analysis of quality control samples and were <5%; the accuracy of determinations varied from 96 to 99%. The method was able to determine the therapeutic levels of metoprolol enantiomers in both human plasma and saliva samples successfully, which can aid in therapeutic drug monitoring in clinical laboratories. Copyright © 2016 John Wiley & Sons, Ltd.

A new strategy for surface modification of polysulfone membrane by in situ imprinted sol-gel method for the selective separation and screening of L-Tyrosine as a lung cancer biomarker.

In this work, a novel method based on in situ molecularly imprinted sol-gel for the surface modification of a polysulfone membrane (PSM) was developed. A modified molecularly imprinted sol-gel polysulfone membrane (MSM) was placed in a homemade plastic tube and coupled on-line with LC/MS/MS for the selective extraction and screening of l-Tyrosine (Tyr) as a tentative lung cancer biomarker in human plasma samples. The existence of molecularly imprinted sol-gel layers on both sides of a PSM was examined using scanning electron microscopy (SEM). To evaluate the role of precursor in the extraction performance, repeatability, and selectivity of developed method, three precursors, 3-(propylmethacrylate) trimethoxysilane (P1), 3-(triethoxysilyl)-propylamine (P2), tetraethyl orthosilicate (P3), individually and together were used for treatment of PSM. Our investigation showed that a single precursor's route is more repeatable, straightforward, precise, accurate, and selective for the extraction of Tyr in plasma samples. Moreover, to achieve the best conditions and extraction efficiency, the effect of influential parameters, including the conditioning, washing, and elution of solvents, sample flow rate, loading time, desorption time, loading sample volume, salt effect, pH, and adsorption capacity for the most efficiently prepared membranes were truly investigated. The non-molecularly imprinted sol-gel polysulfone membrane (NSM) was prepared as a blank via the same process but in the absence of the Tyr. The LOD (S/N = 3/1) was 0.1 nmol L(-1) and the LOQ (S/N = 10/1) was 0.34 nmol L(-1) for Tyr in the plasma samples. The linearity for the Tyr was in the range of 0.34-2000 nmol L(-1) in the plasma samples. The coefficients of determination values were ≥0.998 for all runs. The extraction recovery was between 80%-85% for Tyr in the plasma samples. In addition, MSM could be used for up to 50 extractions without a significant change in recovery percentage.

On-line determination of sarcosine in biological fluids utilizing dummy molecularly imprinted polymers in microextraction by packed sorbent.

Several years ago, sarcosine received attention as a prostate-cancer marker. Prostate cancer is one of the most widespread types of tumor diseases in men. The prostate-specific antigen is normally used as a marker, and it can only be detected in blood with a sensitivity of approximately 80%. In the present study, dummy molecularly imprinted polymers in microextraction by packed sorbent with on-line liquid chromatography coupled to tandem mass spectrometry was used for the determination of sarcosine in human plasma and urine samples. The polymer network glycine was used for the dummy molecularly imprinted polymers. The selectivity of the method was evaluated using similar prostate-cancer biomarkers. In addition, various parameters affecting the extraction performance were investigated. The method limits of detection and quantification in the plasma and urine were 1.0 and 3.0 ng/mL, respectively. The values of the coefficient of determination were over 0.99 for all runs in the studied concentration range (3.0-10 000 ng/mL). The method recovery was 87 and 89% in plasma and urine, respectively. The intraday and interday precisions of sarcosine in the plasma and urine samples were in the ranges of 4.0-7.1, 3.0-6.3, 2.9-4.7, and 5.0-6.7, respectively.

Dried saliva spot as a sampling technique for saliva samples.

For the first time, dried saliva spot (DSS) was used as a sampling technique for saliva samples. In the DSS technique 50 µL of saliva was collected on filter paper and the saliva was then extracted with an organic solvent. The local anesthetic lidocaine was used as a model compound, which was determined in the DSS using liquid chromatography and mass spectrometry. The results obtained for the determination of lidocaine in saliva using DSS were compared with those from a previous study using a microextraction by packed sorbent syringe as the sampling method for saliva. This study shows that DSS can be used for the analysis of saliva samples. The method is promising and very easy in terms of sampling and extraction procedures. The results from this study are in good agreement with those from our previous work on the determination of lidocaine in saliva. DSS can open a new dimension in the saliva handling process in terms of sampling, storing and transport.

Microextraction by packed sorbent: an emerging, selective and high-throughput extraction technique in bioanalysis.

Sample preparation is an important analytical step regarding the isolation and concentration of desired components from complex matrices and greatly influences their reliable and accurate analysis and data quality. It is the most labor-intensive and error-prone process in analytical methodology and, therefore, may influence the analytical performance of the target analytes quantification. Many conventional sample preparation methods are relatively complicated, involving time-consuming procedures and requiring large volumes of organic solvents. Recent trends in sample preparation include miniaturization, automation, high-throughput performance, on-line coupling with analytical instruments and low-cost operation through extremely low volume or no solvent consumption. Micro-extraction techniques, such as micro-extraction by packed sorbent (MEPS), have these advantages over the traditional techniques. This paper gives an overview of MEPS technique, including the role of sample preparation in bioanalysis, the MEPS description namely MEPS formats (on- and off-line), sorbents, experimental and protocols, factors that affect the MEPS performance, and the major advantages and limitations of MEPS compared with other sample preparation techniques. We also summarize MEPS recent applications in bioanalysis.

Screening and determination of drugs in human saliva utilizing microextraction by packed sorbent and liquid chromatography-tandem mass spectrometry.

This study presents a new method for collecting and handling saliva samples using an automated analytical microsyringe and microextraction by packed syringe (MEPS). The screening and determination of lidocaine in human saliva samples utilizing MEPS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were carried out. An exact volume of saliva could be collected. The MEPS C8 -cartridge could be used for 50 extractions before it was discarded. The extraction recovery was about 60%. The pharmacokinetic curve of lidocaine in saliva using MEPS-LC-MS/MS is reported.

Molecularly imprinted polymer in microextraction by packed sorbent for the simultaneous determination of local anesthetics: lidocaine, ropivacaine, mepivacaine and bupivacaine in plasma and urine samples.

This study presents the use of molecularly imprinted polymer (MIP) as packing material for microextraction by packed syringe (MEPS) to achieve higher extraction selectivity. Pentycaine was used as template for MIP. Development and validation of the determination of lidocaine, ropivacaine, mepivacaine and bupivacaine in human plasma and urine samples utilizing MIP-MEPS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were carried out. The MEPS MIP-cartridge could be used for 100 extractions before it was discarded. The extraction recovery ranged from 60 to 80%. The correlation coefficients values were >0.999 for all assays using lidocaine, ropivacaine, mepivacaine and bupivacaine in the calibration range 5-2000 nmol/L. The accuracy of the studied compounds, given as a percentage variation from the nominal concentration values, ranged from -4.9 to 8.4% using plasma and urine samples. The between-batch precision, given as the relative standard deviation, at three different concentrations (quality control samples) was ranged from -4.7 to 14.0% and from 1.8 to 12.7% in plasma and urine, respectively. The lower limit of quantification and limit of detection of the studied substances were 5.0 and 1.0 nm, respectively.

Polyacrylonitrile / graphene oxide nanofibers for packed sorbent microextraction of drugs and their metabolites from human plasma samples.

In the present study, a new graphene based nanofibers material (Polyacrylonitrile/Graphene Oxide (PAN/GO)) was used for microextraction by packed sorbent (MEPS). The PAN/GO nanofiber was synthesized using the electrospinning technique. MEPS online with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was utilized for the extraction and determination of two local anesthetic drugs (lidocaine, prilocaine) and their major metabolites (2,6-xylidine, o-toluidine) in human plasma samples. Parameters affecting the extraction efficiency were investigated and optimized (including sample pH, washing solution and elution solution). The validation of the method was based on FDA (Food and Drug Administration) guidelines for bioanalytical methods. The calibration curve ranged from 2.00 to 2000 nmol/L for lidocaine and prilocaine, and from 10.0 to 2000 nmol/L for 2,6-xylidine and o-toluidine. The coefficient of determination (R2) values were 0.996, 0.995, 0.995, 0.996 (n = 3) for lidocaine, prilocaine, 2,6-xylidine and o-toluidine, respectively. The extraction recovery was 93.0% for lidocaine, 96.0% for prilocaine, 68.0% for 2,6-xylidine and 69.0% for o-toluidine. The limits of detection (LODs) were 0.25, 0.50, 2.50, 1.25 nmol/L for lidocaine, prilocaine, 2,6-xylidine and o-toluidine, respectively. The lower limits of quantification (LLOQs) were 2.0 nmol/L for lidocaine and prilocaine, and 10 nmol/L for 2,6-xylidine and o-toluidine, respectively. The accuracy values for the quality control (QC) samples were in the range of 91.0-111% for lidocaine, 92.0-118% for prilocaine, 84.0-98.0% for 2,6-xylidine and 82.0-90.0% for o-toluidine. The inter-day precisions for QC samples ranged from 7.0% to 11.8% for lidocaine, from 8.6% to 11.7% for prilocaine, from 8.0% to 10.0% for 2,6-xylidine and from 8.0% to 9.0% for o-toluidine. The matrix effect values were in the range of -2.3% to -8.6% for lidocaine, -2.7% to -10.2% for prilocaine, 4.8%-5.2% for 2, 6-xylidine and -8.2% to 9.4% for o-toluidine.

Reduced graphene oxide as an efficient sorbent in microextraction by packed sorbent: Determination of local anesthetics in human plasma and saliva samples utilizing liquid chromatography-tandem mass spectrometry.

Herein, reduced graphene oxide (RGO) has been utilized as an efficient sorbent in microextraction by packed sorbent (MEPS). The combination of MEPS and liquid chromatography-tandem mass spectrometry has been used to develop a method for the extraction and determination of three local anesthetics (i.e. lidocaine, prilocaine, and ropivacaine) in human plasma and saliva samples. The results showed that the utilization of RGO in MEPS could minimize the matrix effect so that no interfering peaks at the retention times of the analytes or internal standard was observed. The high extraction efficiency of this method was approved by mean recoveries of 97.26-106.83% and 95.21-105.83% for the studied analytes in plasma and saliva samples, respectively. Intra- and inter-day accuracies and precisions for all analytes were in good accordance with the international regulations. The accuracy values (as percentage deviation from the nominal value) of the quality control samples were between -2.1 to 13.9 for lidocaine, -4.2 to 11.0 for prilocaine and between -4.5 to -2.4 for ropivacaine in plasma samples while the values were ranged from -4.6 to 1.6 for lidocaine, from -4.2 to 15.5 for prilocaine and from -3.3 to -2.3 for ropivacaine in human saliva samples. Lower and upper limit of quantification (LLOQ, ULOQ) were set at 5 and 2000 nmol L-1 for all of the studied drugs. The correlation coefficients values were ≥0.995. The limit of detection values were obtained 4 nmol L-1 for lidocaine and prilocaine, and 2 nmol L-1 for ropivacaine.

Nanomaterials as sorbents for sample preparation in bioanalysis: A review.

In recent years, application of nanomaterials as sorbent has gained the attention of researchers in bioanalysis. Different nanomaterials have been utilized as the sorbent in extraction techniques such as solid phase extraction, dispersive solid phase extraction, magnetic solid phase extraction, microextraction by packed sorbent, solid phase microextraction, dispersive µ-solid phase extraction, and stir bar sorptive extraction. In the present review, different nanomaterials which have recently been utilized as sorbent for bioanalysis are classified into six main groups, namely metallic, metallic and mixed oxide, magnetic, carbonaceous, silicon, and polymer-based nanomaterials. Application of these nanomaterials in different extraction techniques for bioanalysis has been reviewed. This study shows that magnetic nanomaterials have gained significant attention owing to their magnetic separation ability. In addition, the present review shows that there is a lack in the application of nanomaterials for on-line analysis procedures, most probably due to some intrinsic properties of nanomaterials such as spontaneous agglomeration.

Molecularly imprinted polymer-sol-gel tablet toward micro-solid phase extraction: II. Determination of amphetamine in human urine samples by liquid chromatography-tandem mass spectrometry.

Amphetamine selective molecularly imprinted sol-gel polymer tablets, MIP-tablets, for solid-phase microextraction of biofluid samples were prepared. An acetonitrile solution of deuterated amphetamine template and silane precursor, 3-(propylmethacrylate) trimethoxysilane, was soaked into the pores of polyethylene tablet substrates and polymerized by an acid-catalysed sol-gel process. Application of the resultant MIP-tablets to extract amphetamine from human urine samples followed by LC-MS/MS analysis was investigated. The extraction protocol was optimised with respect to pH of sample, addition of sodium chloride, extraction time, desorption solvent and desorption time. The final analysis method determined amphetamine in human urine with a limit of detection (LOD) of 1.0ng/mL and a lower limit of quantification (LLOQ) of 5ng/mL. Validation demonstrated accuracy of the method was 91.0-104.0% and inter-assay precision was 4.8-8.5% (RSD). Extraction recovery was 80%. The MIP-tablets could be re-used and the same tablet could be employed for more than twenty extractions.

Distribution of local anesthetics between aqueous and liposome phases.

Liposomes were used as biomimetic models in capillary electrokinetic chromatography (EKC) for the determination of distribution constants (KD) of certain local anesthetics and a commonly used preservative. Synthetic liposomes comprised phosphatidylcholine and phosphatidylglycerol phospholipids with and without cholesterol. In addition, ghost liposomes made from red blood cell (RBC) lipid extracts were used as pseudostationary phase to acquire information on how the liposome composition affects the interactions between anesthetics and liposomes. These results were compared with theoretical distribution coefficients at pH 7.4. In addition to 25°C, the distribution constants were determined at 37 and 42°C to simulate physiological conditions. Moreover, the usability of five electroosmotic flow markers in liposome (LEKC) and micellar EKC (MEKC) was studied. LEKC was proven to be a convenient and fast technique for obtaining data about the distribution constants of local anesthetics between liposome and aqueous phase. RBC liposomes can be utilized for more representative model of cellular membranes, and the results indicate that the distribution constants of the anesthetics are greatly dependent on the used liposome composition and the amount of cholesterol, while the effect of temperature on the distribution constants is less significant.

Molecularly imprinted polymer-sol-gel tablet toward micro-solid phase extraction: I. Determination of methadone in human plasma utilizing liquid chromatography-tandem mass spectrometry.

In the present work molecularly imprinted sol-gel tablet (MIP-Tablet) was prepared. The MIP-sol-gel was prepared as a thin layer on polyethylene material in a tablet form. Methadone-d9 was selected as the template and 3-(propylmethacrylate)-trimethoxysilane was used as precursor. MIP-Tablet was applied for micro-solid phase extraction (µ-SPE). The MIP-Tablet was used for the determination of methadone in human plasma samples utilizing liquid chromatography-tandem mass spectrometry; and each tablet could be used twenty times. The extraction time was 10 min while desorption time was 6 min. Factors affecting the extraction efficiency such as desorption solvents, sample pH, salt addition, extraction time, desorption time and adsorption capacity were investigated. The calibration curves were obtained within the range of 5-5000 ng/mL using methadone in human plasma samples. The coefficients of determination (r(2)) values were ≥0.999 for all runs and the extraction recovery was >80%. The accuracy values for quality control samples varied from +3.6 to +9.7% and the inter-day precision (RSD %) values were ranged from 5.0 to 8.0%. The limit of detection was 1.0 ng/mL and the lower limit of quantification was 5 ng/mL utilizing methadone in human plasma samples.

Molecularly imprinted polymers for on-line extraction techniques.

Recent years have seen an increasing interest in the use of molecularly imprinted polymers (MIPs) as a sorbent for different extraction methods and this is due to its high selectivity. The MIP is designed to show specificity for the analyte of interest. Moreover, MIPs show physical robustness, resistance to high temperatures and pressures, and stability in the presence of acids, bases and a wide range of organic solvents. In the present article, various novel sample preparation techniques which MIPs applied as sorbent and on-line connected with analytical instruments were highlighted and discussed. The future aspects of MIPs as well were described.

Three-phase molecularly imprinted sol-gel based hollow fiber liquid-phase microextraction combined with liquid chromatography-tandem mass spectrometry for enrichment and selective determination of a tentative lung cancer biomarker.

In the present study, the modification of a polysulfone hollow fiber membrane with in situ molecularly imprinted sol-gel process (as a novel and one-step method) was prepared and investigated. 3-(propylmethacrylate)trimethoxysilane (3PMTMOS) as an inorganic precursor was used for preparation of molecularly imprinted sol-gel. The modified molecularly imprinted sol-gel hollow fiber membrane (MSHM) was used for the liquid-phase microextraction (LPME) of hippuric acid (HA) in human plasma and urine samples. MSHM as a selective, robust, and durable tool was used for at least 50 extractions without significant decrease in the extraction efficiency. The non-molecularly imprinted sol-gel hollow fiber membrane (NSHM) as blank hollow fiber membrane was prepared by the same process, only without HA. To achieve the best condition, influential parameters on the extraction efficiency were thoroughly investigated. The capability of this robust, green, and simple method for extraction of HA was successfully accomplished with LC/MS/MS. The limits of detection (LOD) and quantification (LOQ) in human plasma and urine samples were 0.3 and 1.0nmolL(-1), respectively. The standard calibration curves were obtained within the concentration range 1-2000nmolL(-1) for HA in human plasma and urine. The coefficients of determination (r(2)) were ≥0.998. The obtained data exhibited recoveries were higher than 89% for the extraction of HA in human plasma and urine samples.