Synthesis and evaluation of fluorescent resins with europium-ß-diketonate complex for orthodontic use.

No effective technique exists for removing adhesive remnants following bracket debonding. We propose that fluorescence imaging using europium ions (Eu3+) offers an effective solution for minimizing iatrogenic enamel damage. This study aimed to assess the impact of different mixing ratios of monomer mixtures on the photoluminescence and flexural properties of a newly developed fluorescent adhesive. Four monomer blends with varying urethane dimethacrylate (UDMA) to triethylene glycol dimethacrylate (TEGDMA) ratios were prepared and polymerized. The blends contained 0.1 wt% of tris(1,3-diphenyl-1,3-propanedionato)(1,10-phenanthroline) Eu(III), [Eu(DBM)3Phen], as the phosphor. Optical measurements and flexural tests were conducted for each resin specimen. The emission spectra exhibited narrow bands corresponding to the 4f-4f transitions of the Eu3+ ions. The photoluminescence properties remained unaffected by the mixing ratio, whereas the mechanical properties tended to improve with higher UDMA content. We conclude that the Eu(DBM)3Phen-containing resin shows promise as a fluorescent orthodontic adhesive that contributes to preserving enamel health.

From Tooth Adhesion to Bioadhesion: Development of Bioabsorbable Putty-like Artificial Bone with Adhesive to Bone Based on the New Material "Phosphorylated Pullulan".

Bioabsorbable materials have a wide range of applications, such as scaffolds for regenerative medicine and cell transplantation therapy and carriers for drug delivery systems. Therefore, although many researchers are conducting their research and development, few of them have been used in clinical practice. In addition, existing bioabsorbable materials cannot bind to the body's tissues. If bioabsorbable materials with an adhesive ability to biological tissues can be made, they can ensure the mixture remains fixed to the affected area when mixed with artificial bone or other materials. In addition, if the filling material in the bone defect is soft and uncured, resorption is rapid, which is advantageous for bone regeneration. In this paper, the development and process of a new bioabsorbable material "Phosphorylated pullulan" and its capability as a bone replacement material were demonstrated. Phosphorylated pullulan, which was developed based on the tooth adhesion theory, is the only bioabsorbable material able to adhere to bone and teeth. The phosphorylated pullulan and ß-TCP mixture is a non-hardening putty. It is useful as a new resorbable bone replacement material with an adhesive ability for bone defects around implants.

Periodontal tissue regeneration by recombinant human collagen peptide granules applied with ß-tricalcium phosphate fine particles.

OBJECTIVES: Recombinant human collagen peptide (RCP) is a recombinantly created xeno-free biomaterial enriched in arginine-glycine-aspartic acid sequences with good processability whose use for regenerative medicine applications is under investigation. The biocompatibility and osteogenic ability of RCP granules combined with ß-tricalcium phosphate (TCP) submicron particles (ß-TCP/RCP) were recently demonstrated. In the present study, ß-TCP/RCP was implanted into experimental periodontal tissue defects created in beagles to investigate its regenerative effects. METHODS: An RCP solution was lyophilized, granulated, and thermally cross-linked into particles approximately 1 mm in diameter. ß-TCP dispersion (1 wt%; 500 µL) was added to 100 mg of RCP granules to form ß-TCP/RCP. A three-walled intrabony defect (5 mm × 3 mm × 4 mm) was created on the mesial side of the mandibular first molar and filled with ß-TCP/RCP. RESULTS: A micro-computed tomography image analysis performed at 8 weeks postoperative showed a significantly greater amount of new bone after ß-TCP/RCP grafting (2.2-fold, P < 0.05) than after no grafting. Histological findings showed that the transplanted ß-TCP/RCP induced active bone-like tissue formation including tartaric acid-resistant acid phosphatase- and OCN-positive cells as well as bioabsorbability. Ankylosis did not occur, and periostin-positive periodontal ligament-like tissue formation was observed. Histological measurements performed at 8 weeks postoperative revealed that ß-TCP/RCP implantation formed 1.7-fold more bone-like tissue and 2.1-fold more periodontal ligament-like tissue than the control condition and significantly suppressed gingival recession and epithelial downgrowth (P < 0.05). CONCLUSIONS: ß-TCP/RCP implantation promoted bone-like and periodontal ligament-like tissue formation, suggesting its efficacy as a periodontal tissue regenerative material.

Development of Autopolymerizing Resin Material with Antimicrobial Properties Using Montmorillonite and Nanoporous Silica.

Although autopolymerizing resin offers numerous applications in orthodontic treatment, plaque tends to accumulate between the appliance and the mucosa, which increases the number of microorganisms present. In this study, we added cetylpyridinium chloride (CPC) loaded montmorillonite (Mont) and nanoporous silica (NPS) to autopolymerizing resin (resin-Mont, resin-NPS) and evaluated their drug release capacity, antimicrobial capacity, drug reuptake capacity, mechanical strength, and color tone for the devolvement of autopolymerizing resin with antimicrobial properties. As observed, resin-Mont and resin-NPS were capable of the sustained release of CPC for 14 d, and a higher amount of CPC was released compared to that of resin-CPC. Additionally, resin-Mont and resin-NPS could reuptake CPC. Moreover, the antimicrobial studies demonstrated that resin-Mont and resin-NPS could release effective amounts of CPC against Streptococcus mutans for 14 d and 7 d after reuptake, respectively. Compared to resin-CPC, resin-Mont exhibited a higher sustained release of CPC in all periods, both in the initial sustained release and after reuptake. However, the mechanical strength decreased with the addition of Mont and NPS, with a 36% reduction observed in flexural strength for resin-Mont and 25% for resin-NPS. The application of these results to the resin portion of the orthodontic appliances can prevent bacterial growth on the surface, as well as on the interior, of the appliances and mitigate the inflammation of the mucosa.

Osteoclast formation from mouse bone marrow cells on micro/nano-scale patterned surfaces.

OBJECTIVES: Osteoclasts can sense the surface topography of materials. However, it is difficult to identify the structural factors that affect osteoclast formation and its function. Furthermore, we hypothesized that the type of osteoclast precursor cells also affects osteoclastogenesis in the materials. In this study, we investigated the effects of defined micro/nanoscale patterns on osteoclastogenesis from bone marrow cells (BMCs). METHODS: Various cyclo-olefin polymer (COP) patterns were prepared using nanoimprinting. The effects of shape, size, and height of the patterns, and the wettability of the patterned surfaces on osteoclastogenesis from BMCs were evaluated in vitro. RESULTS: Osteoclast formation was promoted on pillars (diameter, 1 µm or 500 nm; height, 500 nm). Notably, osteoclastogenesis from BMCs was better promoted on hydrophobic pillars than on hydrophilic pillars. In contrast, decreased osteoclast formation was observed on the nanopillars (diameter, 100 nm; height, 200 nm). CONCLUSIONS: We demonstrated the promotion of osteoclast formation from BMCs on hydrophobic pillars with diameters of 1 µm and 500 nm. Some cellular behaviors in the patterns were dependent on the type of osteoclast precursor cells. The designed patterns are useful for designing the surface of dental implants or bone replacement materials with a controllable balance between osteoblast and osteoclast activities.

Ultrasonic irrigation of periodontal pocket with surface pre-reacted glass-ionomer (S-PRG) nanofiller dispersion improves periodontal parameters in beagle dogs.

OBJECTIVES: Surface pre-reacted glass-ionomer (S-PRG) nanofiller, an antibacterial ion-releasing bioactive glass, has been shown to adhere to tooth surfaces and reported to improve inflammatory parameters in experimental periodontitis. In this study, cementum substrate was irrigated ultrasonically with dispersion to examine in-vitro nanofiller adhesion and antibacterial activity. Moreover, periodontal pockets in a beagle dog were ultrasonically irrigated with dispersion to assess periodontal healing. METHODS: The morphology of human cementum irrigated with S-PRG nanofiller dispersion was examined by scanning electron microscopy and energy dispersive X-ray spectrometry. The antibacterial activity of the treated cementum was tested using Actinomyces naeslundii. In addition, experimentally formed periodontal pockets in beagle dog were ultrasonically irrigated with S-PRG nanofiller dispersion. Periodontal parameters (gingival index, bleeding on probing, probing pocket depth, and clinical attachment level) were measured from baseline (0 weeks) through 12 weeks. Moreover, the effects of irrigation with S-PRG nanofiller on changes in periodontal microflora and bone healing were analyzed. RESULTS: After ultrasonic irrigation, S-PRG nanofiller adhered to the cementum and exhibited antibacterial activity. The periodontal parameters were shown to improve following ultrasonic irrigation with S-PRG nanofiller dispersion. Analysis by next-generation sequencing revealed that the ratio of red-complex species decreased in the pockets irrigated with S-PRG nanofiller dispersion. In addition, the S-PRG nanofiller showed the potential to promote bone healing. CONCLUSIONS: Ultrasonic irrigation with S-PRG nanofiller dispersion using an ultrasonic scaler system permitted delivery of the S-PRG nanofiller to the root surface, providing improved parameters in experimental periodontitis and modifying the composition of subgingival periodontal microflora.

Evaluation of antibacterial and cytocompatible properties of multiple-ion releasing zinc-fluoride glass nanoparticles.

Zinc-fluoride glass nanoparticles (Zinc-F) release several ions, such as fluoride, zinc and calcium ions, through acid-base reactions. The aim of this study was to evaluate the antibacterial and cytotoxic properties of Zinc-F. Antibacterial tests showed that a Zinc-F eluting solution significantly reduced the turbidity and colony-forming units of Streptococcus mutans and Actinomyces naeslundii, compared to that of calcium-fluoroaluminosilicate glass nanoparticles without zinc ions. In live/dead staining, Zinc-F eluate significantly decreased green-stained bacterial cells, indicating live cells, compared with the control (no application). Human dentin coated with Zinc-F showed suppressed S. mutans and A. naeslundii biofilm formation. Additionally, Zinc-F eluate showed low cytotoxic effects in osteoblastic and fibroblastic cells. Therefore, our findings suggested that Zinc-F exhibits antibacterial and biocompatible properties through multiple-ion release.

Antibacterial coating of tooth surface with ion-releasing pre-reacted glass-ionomer (S-PRG) nanofillers.

OBJECTIVES: Surface pre-reacted glass-ionomer (S-PRG) fillers release antibacterial borate and fluoride ions. We fabricated nanoscale S-PRG fillers (S-PRG nanofillers) for antibacterial coating of tooth surfaces and assessed the antibacterial effects of this coating in vitro. In addition, we creating a canine model of periodontitis to evaluate the effectiveness of S-PRG nanofiller application on tooth roots and improvement of periodontal parameters. METHODS: Human dentin blocks were coated with S-PRG nanofiller (average particle size: 0.48 µm) and then characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), and ion-releasing test. Antibacterial effects of dentin blocks coated with S-PRG nanofiller were examined using bacterial strains, Streptococcus mutans and Actinomyces naeslundii. Next, we created an experimental model of periodontitis in furcation of premolars of beagle dogs. Then, S-PRG nanofiller coating was applied onto exposed tooth root surfaces. Periodontal parameters, gingival index (GI), bleeding on probing (BOP), probing pocket depth (PPD), and clinical attachment level (CAL), were measured from baseline until 4 weeks. In addition, bone healing was radiographically and histologically examined. RESULTS: SEM and EDX revealed that S-PRG nanofillers uniformly covered the dentin surface after coating. Dentin blocks coated with S-PRG nanofiller showed ion-releasing property, bacterial growth inhibition, and sterilization effects. In the experimental periodontitis model, S-PRG nanofiller coating significantly reduced clinical inflammatory parameters, such as GI (P < 0.01) and BOP (P < 0.05), compared to uncoated samples. In addition, PPD and CAL significantly decreased by S-PRG nanofiller coating (2 weeks: P < 0.05; 3 and 4 weeks: P < 0.01), suggesting the improvement of periodontitis. Micro-CT and histology revealed that bone healing of furcation defects was enhanced by S-PRG nanofiller coating. CONCLUSION: S-PRG nanofiller coating provides antibacterial effects to tooth surfaces and improves clinical parameters of periodontitis.

Antibacterial and Antibiofilm Photodynamic Activities of Lysozyme-Au Nanoclusters/Rose Bengal Conjugates.

Antibacterial photodynamic therapy (aPDT) utilizes reactive oxygen species such as singlet oxygen (1O2) and free radicals via photosensitizers, which are light and light-sensitive agents, to reduce bacterial infections. It has been utilized as a treatment for dental diseases in place of antibiotic therapies. However, aPDT does not always cause the desired therapeutic effect due to the instability of organic photosensitizers and the formation of bacterial biofilms. To promote the antibacterial and antibiofilm effects of aPDT, we have proposed a lysozyme (Lys)-gold nanoclusters (Au NCs)/rose bengal (Lys-Au NCs/RB) conjugate as a novel photosensitizer. This conjugate was found to effectively impede the growth of both gram-positive and gram-negative bacteria when exposed to white light-emitting diode (LED) irradiation. The photoexcited Lys-Au NCs/RB showed significantly higher antibacterial activity than photoexcited Lys-Au NCs or RB alone. The synergistic effect is a result of the combination of Lys (an antibacterial protein) and enhanced 1O2 generation related to resonance energy transfer (RET) in the Au NCs/RB conjugate. Photoexcited Lys-Au NCs/RB increased the effects of aPDT in a dose- and time-dependent manner. Furthermore, the photoexcited Lys-Au NCs/RB successfully decreased Streptococcus mutans biofilm formation. However, in contrast, it did not have a negative effect on the proliferation, adhesion, or spread of mammalian cells, indicating low cytotoxicity. Lys-Au NCs/RB is a novel photosensitizer with low cytotoxicity that is capable of bacterial inactivation and the suppression of biofilm formation, and could help to improve dental treatments in the future.

Proliferation of Saos-2 and Ca9-22 cells on grooved and pillared titanium surfaces.

BACKGROUND: Surface nanostructures in titanium (Ti) oral implants are critical for rapid osseointegration. OBJECTIVE: The purpose of this study was to evaluate the growth of osteoblast-like (Saos-2) and epithelial-like (Ca9-22) cells on nanopatterned Ti films. METHODS: Ti films with 500 nm grooves and pillars were fabricated by nanoimprinting, and seeded with Saos-2 and Ca9-22 cells. Cell viability and morphology were assessed by cell proliferation assay and scanning electron microscopy, respectively. RESULTS: As assessed after 1 hour, proliferation of Saos-2 cells was most robust on grooved films than on pillared and smooth films, in this order. These cells approximately doubled on grooved and pillared substrates in 24 hours and after 5 days, but not on smooth surfaces. In contrast, Ca9-22 cells favored smooth surfaces, followed by grooved and pillared films. Indeed, cells sparsely adhered to pillared films over 5 days of incubation (p < 0.05). CONCLUSIONS: The data show that Saos-2 and Ca9-22 cells respond differently to different nanostructures, and highlight the potential use of nanopatterns to promote bone regeneration or to prevent epithelial downgrowth at the implant-bone interface.

Photodynamic inactivation of oral bacteria with silver nanoclusters/rose bengal nanocomposite.

Antimicrobial photodynamic therapy (a-PDT) is a promising anti-infective technique for generation of singlet oxygen (1O2) to target dental disease. However, conventional organic photosensitizers have problems for clinical use in terms of cytotoxicity, quenching of a-PDT activity by self-dimerization, and the lack of long-term antibacterial effect. We herein propose silver nanoclusters/rose bengal nanocomposite (AgNCs/RB) as a novel photosensitizer with two primary antibacterial effects: (1) 1O2 generation by irradiated RB and (2) Ag+ ion release from AgNCs. AgNCs/RB irradiated with white light-emitting diode (LED) for a short irradiation time of 1 min significantly decreased the bacterial turbidity of Streptococcus mutans, Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans (P < 0.05). In SEM, TEM and LIVE/DEAD staining images, photoexcited AgNCs/RB reduced S. mutans colonization, destroyed the cell membrane, and increased the number of dead cells. The antibacterial efficiency of photoexcited AgNCs/RB was greater than that of AgNCs or RB alone (P < 0.05), suggesting a synergistic effect of 1O2 and Ag+ ions from photoexcited AgNCs/RB. By contrast, photoexcited AgNCs/RB did not affect WST-8 and LDH activities and morphology of NIH3T3 mammalian cells, indicating low cytotoxicity. Interestingly, the antibacterial activity of AgNCs/RB on S. mutans was maintained even after the cessation of LED irradiation, indicating a long-term antibacterial effect due to released Ag+ ions. The present AgNCs/RB photosensitizers provide effective synergistic antibacterial effects for dental a-PDT via 1O2 and Ag+ ions coupled with low cytotoxicity.

Comparative biological assessments of endodontic root canal sealer containing surface pre-reacted glass-ionomer (S-PRG) filler or silica filler.

Surface pre-reacted glass-ionomer (S-PRG) filler releases several ions, such as fluoride, borate and strontium ions, to exert bioactive effects. We fabricated an endodontic root canal sealer containing S-PRG fillers (S-PRG sealer) and then evaluated the antibacterial and anti-inflammatory properties of S-PRG sealer compared with sealer containing conventional silica fillers (silica sealer). Antibacterial tests showed that S-PRG sealer significantly reduced the turbidity of Enterococcus faecalis compared with silica sealer. Implantation of S-PRG or silica sealer blocks in rat subcutaneous tissue showed that S-PRG sealer decreased the proinflammatory response compared with silica sealer at 10 days post-implantation. In addition, immunostaining revealed that infiltration of CD68- and peroxidase-positive cells around the S-PRG sealer was significantly lower than that in silica sealer. Therefore, it was suggested that S-PRG sealer exhibits antibacterial and anti-inflammatory effects.

Improvement in cell proliferation on silicone rubber by carbon nanotube coating.

Silicone rubbers are widely used as tissue implants because of their flexibility and chemical stability. However, they have limited cellular adhesiveness and may cause problems in the long term. In this study, a coating of carbon nanotubes (CNTs) was applied to silicone rubber to improve its cellular adhesiveness. Scanning electron micrograph of this coating revealed that CNTs had formed a densely packed meshwork; the Ra values and protein adsorption capacity were enhanced. Although the contact angle did not change after coating, it decreased after immersion into a culture medium. After cultivation for 6 d, while Saos-2 cells were hardly observed on untreated silicone, the cells proliferated on CNT-coated silicone. Thus, CNT coating might be a simple and effective solution to problems associated with silicone implants.

Modification of the dentin surface by using carbon nanotubes.

Recent studies have shown that carbon nanotubes (CNTs) can be used as biomedical materials because of their unique properties. CNTs effect nucleation of hydroxyapatite, because of which considerable interest has been generated regarding the use of CNTs in dentistry. However, there are only a few reports on the use of CNTs as dental materials. In this study, we investigated the changes induced in the surfaces of tooth slices by the application of a coating of CNTs by observing CNT-coated tooth slices both macroscopically as well as under a scanning electron microscope. Further, we investigated the effect of CNT coating on the tensile bond strength of dentin adhesives. CNTs adhered easily to the tooth surfaces when tooth slices were suspended in a CNT-dispersed solution. Interestingly, it was observed that CNTs selectively adhered to the surfaces of dentin and cementum, possibly by adhering to their exposed collagen fibers. In addition, the CNT coating did not affect the tensile bond strength of dentin adhesives. These results indicate that coating of the teeth with CNTs can be a possible application of CNTs as dental materials.

Multiwalled carbon nanotube coating on titanium.

Carbon nanotubes (CNTs) have excellent chemical durability, mechanical strength and electrical properties. Therefore, there is interest in CNTs for not only electrical and mechanical applications, but also biological and medical applications. We coated titanium, a common material for dental implants, with multiwalled carbon nanotubes (MWCNTs). First, titanium was aminated and covered with collagen. Then, the carboxylated MWCNTs were coated onto the collagen attached to the titanium plate. The collagen-coated titanium plate had a homogeneous MWCNT coating, which showed strong attachment to the titanium surface as a thin layer. The surface roughness was significantly increased with the MWCNT coating. MC3T3-E1 cells were cultured on the MWCNT-coated Ti plate, and showed good cell proliferation and strong cell adhesion. Therefore, the MWCNT coating for titanium could be useful for improvement of cell adhesion on titanium implants.

Adhesion of human osteoblast-like cells (Saos-2) to carbon nanotube sheets.

Carbon nanotubes (CNTs) exhibit excellent cell proliferation properties, which can serve as a scaffold for cell culturing. However, there are only a few reports on adhesion of osteoblast-like cells to a CNT sheet. In this study, we investigated adhesion of osteoblast-like cells to single-walled carbon nanotube (SWNT) and multi-walled carbon nanotube (MWNT) sheets and compared these adhesions with that on a cell culture polystyrene dish by using a cell adhesion test and a scanning electron microscope. The MWNT sheets exhibited faster adhesion of cells at an initial stage than SWNT sheets and cell culture polystyrene dish. The number of attached cells on the MWNT sheets seemed to be greater than on SWNT sheets and cell culture polystyrene. Moreover, the MWNT sheets exhibited both high speed and good capacity for cell adhesion. However, the surface of the MWNT sheets was such that it facilitated cell adherence but hindered the spreading of the attached cells. Interestingly, cell adhesion to CNT sheets was significantly influenced by pre-coating with serum. These results indicate that CNT sheets would play an important role in adsorption of serum proteins, which would consequently facilitate cell adhesion, and that the MWNT sheets have a high cell adhesiveness.

In vivo internal diffusion of several inorganic microparticles through oral administration.

We observed the internal diffusion behavior of inorganic micro/nano particles through oral administration. By oral exposure, the fed particles were absorbed through the digestive system then reached some organs after internal diffusion in the body. For example, TiO2 particles fed to mice were detected in the lung, liver, and spleen after 10 days of feeding. Whereas, the absorption efficiency was extremely low compared with intravenous injection. In a comparison of the simple amount of administration, oral exposure required 102 times or more amount by intravenous injection for detection by an X-ray scanning analytical microscope. During dental treatment, micro/nano particles from tooth or dental materials would generate in the oral cavity, and some of the particles had a possibility to be swallowed, absorbed through the digestive system, and then diffuse into the body. However, our results suggest that biocompatible microparticles that are naturally taken orally affect animals only rarely because of the low absorption efficiency.

Development of a multiwalled carbon nanotube coated collagen dish.

Carbon nanotubes (CNTs) are one of the most interesting nanomaterials because of their excellent characteristics. In this study, a transparent CNTs coating for cell culture dishes was developed and its properties for cell culture were estimated. Carboxylated multiwalled carbon nanotubes (MWCNTs) were dispersed in aqueous sodium cholate solution and applied on a collagen type I-coated cell culture dish (cover glass). The dish surface was homogeneously covered by MWCNTs without aggregation. The MWCNT-coated dish was slightly gray and had good transparency, so conventional optical microscopic observation of the cells on the MWCNT-coated dish was possible. Rat osteoblast-like cells cultured on the MWCNT-coated dish showed slightly lower viability and proliferation compared to the collagen-coated dish. The cell adhesion on the MWCNT-coated dish was much higher than that on the collagen-coated dish. Therefore, MWCNT-coating for dishes will be a useful new material for cell culture.

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants.

Background: Collagen is a basic component of the periodontium and plays an important role in the function of the periodontal unit. Therefore, coating with collagen/gelatin has been applied to enable dental implants to positively interact with peri-implant tissues. Although the micro/nanoscale topography is an important property of the surface of dental implants, smaller collagen/gelatin surface patterns have not been sufficiently developed. Furthermore, only few reports on the behavior of cells on gelatin surfaces with different patterns and sizes exist. In this study, we developed micro/nanometer-scaled gelatin surfaces using genipin crosslinking, with the aim of understanding the use of patterning in surface modification of dental implants. Results: Grooves, holes, and pillars, with widths or diameters of 2 µm, 1 µm, or 500 nm were fabricated using a combination of molding and genipin crosslinking of gelatin. The stability of the different gelatin patterns could be controlled by the degree of genipin crosslinking. The gelatin patterns at 20 mM concentration of genipin and 41% crosslinking maintained a stable, patterned shape for at least 14 days in a cell culture medium. A cell morphology study showed that the cells on groves were aligned along the direction of the grooves. In contrast, the cells on pillars and holes exhibited randomly elongated filopodia. The vinculin spots of the cells were observed on the top of ridges and pillars or the upper surface of holes. The results of a cell attachment assay showed that the number of surface-attached cells increased with increasing patterning of the gelatin surface. Unlike the cell attachment assay, the results of a cell proliferation assay showed that Saos-2 cells prefer grooves with diameters of approximately 2 µm and 1 µm and pillars with diameters of 1 µm and heights of 500 nm. The number of cells on pillars with heights of 2 µm was larger than those of the other gelatin surface patterns tested. Conclusion: These data support that a detailed design of the gelatin surface pattern can control both cell attachment and proliferation of Saos-2 cells. Thus, gelatin surfaces patterned using genipin crosslinking are now an available option for biocompatible material patterning.

The degradation of the three layered nano-carbonated hydroxyapatite/collagen/PLGA composite membrane in vitro.

OBJECTIVE: The purpose of this paper was to investigate the in vitro biodegradation of a guided tissue regeneration composite membrane, nano-carbonated hydroxyapatite/collagen/poly(lactic-co-glycolic acid) (nCHAC/PLGA). Especially for periodontal therapy, the functional graded material (FGM) nCHAC/PLGA membrane was prepared that consisted of three layers with 8 wt% nCHAC + PLGA/4 wt% nCHAC + PLGA/PLGA, where one face of the membrane is porous, thereby allowing cell growth thereon and the opposite face of the membrane smooth, thereby inhibiting cell adhesion. METHODS: For evaluation, in vitro degradation specimens of nCHAC/PLGA were immersed into artificial saliva solution at 37 degrees C for 1, 2, 4, 8 and 12 weeks to detect the weight loss over the period, and set pure PLGA membrane as control to compare the degraded behaviors. pH value and calcium concentration of the residual solution were measured, and morphology change was investigated by scanning electron microscopy (SEM). RESULTS: During the experimental period in vitro, the whole shape of the membrane could be kept for 4 weeks, after that it became powder at between 8 and 12 weeks. The results demonstrated that weight loss increased continuously with a reduction in mass of 23.1% after 4 weeks and 88% after 12 week for the nCHAC/PLGA three FGM layers composite membrane. The calcium concentration in the residual solution showed a significant increase after 4 weeks, which referred to the nano-carbonated hydroxyapatite degradation. Moreover, the pH value in the solution of the nCHAC/PLGA membrane was a little higher than that of the pure PLGA membrane, which demonstrated the possible neutralization effect from nCHAC composite for the acid outcome of PLGA in the solution. The pore structure of 8 wt% nCHAC + PLGA was enlarged on the porous surface, while the nonporous surface of pure PLGA also showed a small porous structure after increased time. SIGNIFICANCE: Degradation of the composite membrane is appropriate for practical periodontal repair. Moreover, the new mineral formation on the surface of the composite membrane referred to the possible positive effect in vivo for new bone tissue regeneration.