Encapsulation of p-THPP into nanoparticles: cellular uptake, subcellular localization and effect of serum on photodynamic activity.

The cellular uptake, localization and efflux of meso-tetra-(4-hydroxyphenyl)porphyrin (p-THPP)-loaded nanoparticles have been studied in EMT-6 tumor cells. The effect of blood serum on photocytotoxicity has also been evaluated. Sub-130 nm nanoparticles based on poly(D,L-lactide-co-glycolide) (PLGA) (50:50 PLGA and 75:25 PLGA) and poly(D,L-lactide) (PLA) have been examined in comparison with free p-THPP. For all formulations tested, uptake of photosensitizer into cells was dependent on concentration, time and temperature. All nanoparticulate formulations accumulated within the cells to a greater extent relative to free drug. Indeed, the fluorescence intensities measured on EMT-6 cells treated with p-THPP-loaded nanoparticulate formulations were at least two-fold higher than those obtained with free dye. Furthermore, the highest accumulation level was found with PLGA nanoparticles. Fluorescence microscopy revealed that endocytosis is a major intracellular sequestration mechanism of these p-THPP formulations and that these were localized into early and late endosomes. The efflux study performed on both nonirradiated and irradiated cells indicated that free and p-THPP-loaded nanoparticles gradually escaped from EMT-6 cells as a function of time. This was more pronounced when cells were treated with nanoparticles and irradiated, reflecting important photodamage. It was also found that regardless of the nanoparticulate formulations tested, p-THPP photocytotoxicity was influenced by the concentration of the serum.

Uptake of oligonucleotide-loaded nanoparticles in prostatic cancer cells and their intracellular localization.

The development of antisense biotechnology is dependent, in part, on creating improved methods for delivering oligonucleotides to cells. In this study, we investigated a colloidal system (nanoparticles (NP) of poly (D,L) lactic acid) that affects the intracellular delivery of oligonucleotides. We have examined the intracellular compartmentalization in DU145 cells of fluorescein labeled phosphorothioate oligonucleotides, both in the free state and when loaded into NP. Fluorescent oligonucleotides were incubated for 18 h with DU145 cells and the mean intracellular fluorescence was determined by flow cytometry. After the addition of monensin, an increase in signal intensity was observed, indicating that free oligonucleotides were resident in an acidic intracellular environment, whereas oligonucleotides from the NP did not reside in an acidic compartment. Free and NP loaded with oligonucleotides effluxed from DU145 cells from two intracellular compartments. This preliminary report indicates that colloidal carriers such as NP could prove to be useful in affecting intracellular trafficking of oligonucleotides in DU145 and in other cells.

Cellular uptake of PEO surface-modified nanoparticles: evaluation of nanoparticles made of PLA:PEO diblock and triblock copolymers.

Nanoparticles with either physically adsorbed or covalently bound poly(ethylene oxide) (PEO) coatings were produced from various combinations of poly(lactic acid) (PLA) and diblock or triblock copolymers of PLA and PEO. The particles were produced by the salting-out process and purified by the cross-flow filtration technique. The amount of PEO at the nanoparticle surface, as well as the residual amount of emulsifier poly(vinyl alcohol) were assessed, with a good correlation with expected values. Stability of the nanoparticulate suspensions was studied at 4 degrees C and after freezing under various conditions for up to 6 months. The nanoparticle redispersibility after storage was related to the thermal behavior of the PEO coatings. The in vitro cellular uptake of the different types of nanoparticles was compared by flow cytometry after incubation with human monocytes in serum and in plasma. The influence of the PEO molecular weight and surface density on the particle uptake was especially marked for the diblock and triblock copolymer formulations, with a decrease in uptake of up to 65% with one of the diblock copolymer formulations. Nanoparticles made of triblock copolymer with short PEO chains at their surface in the postulated "loop conformation" proved to be as resistant to cellular uptake as nanoparticles made of diblock copolymers with PEO chains in the "brush conformation".

Highly loaded nanoparticulate carrier using an hydrophobic antisense oligonucleotide complex.

Antisense oligonucleotides, and particularly those with phosphorothioate backbones, have emerged as potential gene specific therapeutic agents and are currently undergoing evaluation in clinical trials for a variety of diseases. In the area of HIV-1 therapeutics, targeting of oligonucleotides to infected cells, such as macrophages, would be highly desirable. The present study was designed to prepare and characterize oligonucleotide-loaded nanoparticles for this purpose. Due to their hydrophilic characteristics, oligonucleotides are difficult to entrap in polymeric particles. Here, the oligonucleotides were first complexed with cetyltrimethylammonium bromide. The oligonucleotide-loaded nanoparticles were prepared by the emulsification-diffusion method and subsequently purified. In comparison with previous studies, a high oligonucleotide-loading was achieved; 2.5, 5 and 10% oligonucleotide loading were assessed. If the initial oligonucleotide content was 4%, this method produced a final oligonucleotide loading of 1.9% with an entrapment efficiency of 47%. The integrity of the oligonucleotide and of the polymer, in the final freeze-dried product, was retained.

Comparison of two methods of encapsulation of an oligonucleotide into poly(D,L-lactic acid) particles.

The aim of this study was to compare two methods to encapsulate a 25-mer-phosphorothioate oligonucleotide (ODN) into poly(D,L-lactic acid) (PLA) particles. Antisense oligonucleotides belong to a new therapeutic class especially attractive for the treatment of cancers and viral diseases. The development of these new drugs suffers, however, from poor stability in biological media and very low cellular uptake. Polymeric particulate systems display interesting features for ODN delivery. ODN are highly hydrophilic and most encapsulation methods are inappropriate for such molecules. Using poly(D,L-lactide) polymer, two methods of encapsulation were compared. First, a double emulsion technique was used to prepare nano- and microparticles. Secondly, the ODN was combined with a quaternary ammonium, the cethyltrimethyl-ammonium bromide (CTAB), to enhance the hydrophobicity of the molecule before entrapment by the emulsification-diffusion method. Both methods led to the formation of individualized and spherical particles loaded with a significant amount of ODN. Similar entrapment efficiencies were obtained for the nanoparticles prepared by both methods (approx. 27% of the theoretical loading) whereas 45% of entrapment efficiency was observed for the microparticles. Seventy five percent of the ODN were released in 60 min with the particles prepared by the emulsification-diffusion method, whereas only 7% were released in 60 h when using the double emulsion method. A viability test on U-937 cells showed better survival rates with the particles prepared by the double emulsion technique. The results suggest that the location of the ODN in the polymeric matrix is affected by the encapsulation method. Particles containing CTAB appeared more toxic than the ones obtained by the double emulsion technique, however, these particles can still be used for antisense activity since high oligonucleotide loading can be achieved.

Pseudolatex preparation using a novel emulsion-diffusion process involving direct displacement of partially water-miscible solvents by distillation.

Pseudolatexes were obtained by a new process based on an emulsification-diffusion technique involving partially water-miscible solvents. The preparation method consisted of emulsifying an organic solution of polymer (saturated with water) in an aqueous solution of a stabilizing agent (saturated with solvent) using conventional stirrers, followed by direct solvent distillation. The technique relies on the rapid displacement of the solvent from the internal into the external phase which thereby provokes polymer aggregation. Nanoparticle formation is believed to occur because rapid solvent diffusion produces regions of local supersaturation near the interface, and nanoparticles are formed due to the ensuing interfacial phase transformations and polymer aggregation that occur in these interfacial domains. Using this method, it was possible to prepare pseudolatexes of biodegradable and non-biodegradable polymers such as poly(D,L-lactic acid) and poly(epsilon-caprolactone), Eudragit E, cellulose acetate phthalate, cellulose acetate trimellitate using ethyl acetate or 2-butanone as partially water-miscible solvents and poly(vinyl alcohol) or poloxamer 407 as stabilizing agent. A transition from nano- to microparticles was observed at high polymer concentrations. At concentrations above 30% w/v of Eudragit E in ethyl acetate or cellulose acetate phthalate in 2-butanone only microparticles were obtained. This behaviour was attributed to decreased transport of polymer molecules into the aqueous phase.

PEG-coated poly(lactic acid) nanoparticles for the delivery of hexadecafluoro zinc phthalocyanine to EMT-6 mouse mammary tumours.

Hexadecafluoro zinc phthalocyanine (ZnPcF16), a second generation sensitizer for the photodynamic therapy of cancer, was incorporated in three vehicles: poly(D,L-lactic acid) (PLA) nanoparticles, polyethylene glycol (PEG)-coated nanoparticles and a Cremophor EL (CRM) oil-water emulsion. Nanoparticles were prepared by the salting-out procedure. Biodistribution of the dye was assessed by fluorescence in EMT-6 mammary tumour bearing mice after intravenous injection of 1 mumol kg-1 ZnPcF16. Plain nanoparticles were rapidly retained by the reticuloendothelial system (RES) as reflected by the low area under the blood concentration-time curve (AUC0-168, 57 micrograms h g-1). Little tumour uptake of the dye was observed with this formulation. In contrast, PEG-coated nanoparticles displayed a reduced RES uptake, leading to significantly higher blood levels over an extended period (t1/2 30 h; AUC 0-168 227 micrograms h g-1) and enhanced tumour uptake. At 48 h post injection, tumour to skin and tumour to muscle concentration ratios reached 3.5 and 10.8, respectively. Blood levels of ZnPcF16 after administration as a CRM emulsion decreased faster than with PEG-coated nanoparticles (t1/2 12 h), but since no early liver uptake was observed, the AUC0-168 and the tumour uptake were only slightly lower. However, with the CRM formulation, a late liver uptake was observed, reaching 51% of the injected dose after 7 days.

pH-Dependent dissolving nano- and microparticles for improved peroral delivery of a highly lipophilic compound in dogs.

RR01, a new highly lipophilic drug showing extremely low water solubility and poor oral bioavailability, has been incorporated into pH-dependent dissolving particles made of a poly(methacrylic acid-co-ethylacrylate) copolymer. The physicochemical properties of the particles were determined using laser-light-scattering techniques, scanning electron microscopy, high-performance liquid chromatography, and x-ray powder diffraction. Suspension of the free drug in a solution of hydroxypropylcellulose (reference formulation) and aqueous dispersions of pH-sensitive RR01-loaded nanoparticles or microparticles were administered orally to Beagle dogs according to a 2-block Latin square design (n = 6). Plasma samples were obtained over the course of 48 hours and analyzed by gas chromatography/mass spectrometry. The administration of the reference formulation resulted in a particularly high interindividual variability of pharmacokinetic parameters, with low exposure to compound RR01 (AUC0-48h of 6.5 microg x h/mL and coefficient of variation (CV) of 116%) and much higher Tmax, as compared to both pH-sensitive formulations. With respect to exposure and interindividual variability, nanoparticles were superior to microparticles (AUC0-48h of 27.1 microg x h/mL versus 17.7 microg x h/mL with CV of 19% and 40%, respectively), indicating that the particle size may play an important role in the absorption of compound RR01. The performance of pH-sensitive particles is attributed to their ability to release the drug selectively in the upper part of the intestine in a molecular or amorphous form. In conclusion, pH-dependent dissolving particles have a great potential as oral delivery systems for drugs with low water solubility and acceptable permeation properties.

Poly(D,L-lactide-co-glycolide) protein-loaded nanoparticles prepared by the double emulsion method--processing and formulation issues for enhanced entrapment efficiency.

Although extensive research in the field of biodegradable microparticles containing peptide or protein drugs has greatly advanced production know-how, the effects of critical parameters influencing successful drug entrapment have not yet been sufficiently investigated with nano-scaled carriers. This paper deals with the formulation and processing parameters of the w(1)/o/w(2) double emulsion method that can affect nanoparticle size and loading. Fluorescein isothiocyanate-labelled bovine serum albumin (FITC-BSA) was used as a model protein. Results showed that high FITC-BSA entrapment efficiencies were reached (>80%) when sonication was used for the two emulsification steps of the nanoparticle formation, independently of the mixing durations and intensities. By comparison, the use of a vortex mixer for obtaining the primary w(1)/o emulsion led to a rather poor entrapment efficiency (approximately 25%). Some inherent properties of the poly(D,L-lactic-co-glycolic acid) polymer, such as, for example, high molecular weight, high hydrophilicity or the presence of free carboxylic end groups, enhanced the drug entrapment efficiency. It was also demonstrated that a low nominal drug loading, a large volume of the inner w1 phase or the choice of methylene chloride instead of ethyl acetate as organic solvent favoured the drug entrapment, with entrapment efficiency values often reaching 100%. However, when using methylene chloride, the mean particle size was substantially increased, due to the presence of larger particles. Mean particle size increased also when the polymer concentration in the organic phase was increased.

In vitro extended-release properties of drug-loaded poly(DL-lactic acid) nanoparticles produced by a salting-out procedure.

Savoxepine-loaded poly(DL-lactic acid) (PLA) nanoparticles were prepared using an emulsion technique involving a salting-out process which avoids surfactants and chlorinated solvents. After their formation, the nanoparticles were purified by cross-flow microfiltration and subsequently freeze-dried. The drug loading and the drug entrapment efficacy were improved by using savoxepine base rather than the methanesulfonate salt and by modifying the pH of the aqueous phase. A drug entrapment efficacy as high as 95% was obtained with a 9% drug loading. The overall yield of the procedure can rise up to 93%. In vitro release studies have demonstrated that by varying the mean size of the nanoparticles and their drug loading, the release of the drug from the nanoparticles can be modulated to last from several hours to more than 30 days, thus allowing the preparation of an injectable extended-release dosage form.

Preparation techniques and mechanisms of formation of biodegradable nanoparticles from preformed polymers.

The techniques available to prepare biodegradable nanoparticles (nanospheres and nanocapsules) from preformed polymers are reviewed. Although there is abundant literature on this topic, only a few focus on the thorough analysis of preparative procedures. In particular, four techniques are discussed in terms of their technological advantages and drawbacks: emulsification evaporation, solvent displacement, salting-out, and emulsification diffusion. The proposed mechanism of nanoparticle formation for each technique is described from a physicochemical perspective. The effects of preparative variables on nanoparticle size and drug-entrapment efficiency are also discussed.

Preparation and characterization of nanocapsules from preformed polymers by a new process based on emulsification-diffusion technique.

PURPOSE: The aim of this study was to investigate whether biodegradable nanocapsules could be obtained by the emulsification-diffusion technique. METHODS: This technique consists of emulsifying an organic solution containing an oil, a polymer, and a drug in an aqueous solution of a stabilizing agent. The subsequent addition of water to the system induces solvent diffusion into the external phase, resulting in the formation of colloidal particles. Nanoparticles obtained in this way were characterized by their particle size, zeta potential, isopycnic density and drug entrapment. The shape, surface and structure of the nanocapsules were evaluated by freeze fracture scanning electron microscopy (SEM) and by atomic force microscopy (AFM). RESULTS: Density gradient centrifugation confirmed the formation of nanocapsules. The density was found to be intermediate between those of nanoemulsions and nanospheres. The existence of a unique density band indicated high yields. Nanocapsule density was a function of the original oil/polymer ratio, revealing that the polymer content and, consequently, the wall thickness, can be controlled by this method. SEM and AFM showed the presence of capsular structures with smooth homogeneous walls. The versatility and effectiveness of the method were demonstrated using different lipophilic drug/oil core/wall polymer/partially water-miscible solvent systems. The mechanism of nanocapsule formation was explained as a chemical instability (diffusion stranding) generated during diffusion. CONCLUSIONS: This study demonstrated that the emulsification-diffusion technique enables the preparation of nanocapsules in a simple, efficient, reproducible and versatile manner.

Freeze-drying and lyopreservation of diblock and triblock poly(lactic acid)-poly(ethylene oxide) (PLA-PEO) copolymer nanoparticles.

In this study, the formulation and process parameters that determine successful production and long-term stability of freeze-dried poly(lactic acid) (PLA) nanoparticles with "hairy-like" poly(ethylene oxide) (PEO) surfaces were investigated. Nanoparticles with grafted (covalently bound) PEO coatings were produced by the salting-out method from blends of PLA and PLA-PEO diblock or triblock copolymers. PLA nanoparticles with physically adsorbed PEO were also produced. The redispersibility of the nanoparticles after freeze-drying under various conditions was assessed. The surface of the nanoparticles was characterized and classified in terms of "brush" and "loop" conformations. Upon freeze-drying, it appeared that the presence of PEO at the nanoparticle surface could severely impair the redispersibility of the particles, especially in the PEO-grafted systems. This effect was shown to be related to the amount and molecular weight of PEO in the various formulations. In most cases, particle aggregation was prevented by use of trehalose as lyoprotective agent. Increasing the concentration of particles in the suspension to be freeze-dried was shown to induce much less damage to the nanoparticles, and freezing the suspension at a very low temperature (-196 degrees C) was found to further improve the lyoprotective effect. Most of the lyoprotected nanoparticles remained stable for at least 12 weeks at 4 and -25 degrees C. The production and preservation of freeze-dried PLA-PEO diblock and triblock copolymer nanoparticles is feasible under optimized lyoprotective conditions.

Kinetics of blood component adsorption on poly(D,L-lactic acid) nanoparticles: evidence of complement C3 component involvement.

After intravenous administration, nanoparticles suffer a major drawback in that they are rapidly and massively taken up by the cells of the mononuclear phagocyte system. The mechanisms involved in the opsonization, adhesion, and internalization of biodegradable nanoparticles by the mononuclear phagocyte system are still poorly understood. In this work, the kinetics of blood protein adsorption onto nanoparticles of poly(D,L-lactic acid) prepared by the salting-out technique was investigated. Nanoparticles of 312 nm were incubated for variable periods of time (5-60 min) in human serum and citrated plasma. After incubation, the particles were washed and the proteins detached from them, denatured, and analyzed by two-dimensional polyacrylamide gel electrophoresis. In plasma, the predominant protein was immunoglobulin G (IgG), and the amount adsorbed was not dependent on incubation time. Albumin amounts were high for short incubation periods but decreased as a function of time, whereas apolipoprotein E levels increased significantly as a function of the incubation period. Owing to the possible complement cascade inactivation by addition of citrate to plasma, the kinetics of adsorption was also evaluated in serum. In this medium, adsorption of complement C3 components onto the surface of the nanoparticles was clearly evidenced by spots of increasing intensity and area, reaching levels comparable to those of the omnipresent IgG. This result confirms the important role of complement components in the opsonization process of poly(D,L-lactic acid) particles.

Influence of the stabilizer coating layer on the purification and freeze-drying of poly(D,L-lactic acid) nanoparticles prepared by an emulsion-diffusion technique.

In this study, the purification by cross-flow filtration (CFF) and freeze drying of poly(D,L-lactic acid) (PLA) nanoparticles prepared by an emulsion-diffusion technique using poly(vinyl alcohol) (PVAL) or poloxamer 188 (P-188) were investigated. The stability of the suspensions was correlated to the affinity of the stabilizers for the nanoparticle surface, the resistance of the coating layer to continuous filtration and to freeze-thawing procedures. The results indicated a clear difference between the two stabilizers, suggesting that the nature of the coating layer has a very important role during CFF and freeze-drying. Nanoparticles prepared with PVAL were filtered and freeze-dried without nanoparticle fusion. This behaviour was attributed to the formation of a stable thick layer (similar to that found for polystyrene latex). In contrast, aggregation of nanoparticles was observed during CFF for the batches prepared with P-188, indicating that the polypropylene oxide blocks present in the copolymer have little affinity for the PLA surface. However, these suspensions were successfully recovered when using stabilizer solutions as diafiltration media, suggesting a dynamic exchange between the P-188-adsorbed chains and those of the identical polymer remaining in the bulk solution. The presence of P-188 did not prevent nanoparticle aggregation after freeze-drying. Therefore, the use of cryoprotectants was necessary. Aggregation may have been due to an increase in the solubility of P-188 in the bulk solution, which provokes a destabilization of the suspension by desorption and partial coverage of the surface. The best cryoprotectants were found to be sugars containing glucose units. The cryoprotective effect was related to the hydrogen bonding capability of these sugars, which prevented aggregation by dehydration of P-188 forcing it to the PLA surface.

Inhibition of HIV-1 in cell culture by oligonucleotide-loaded nanoparticles.

PURPOSE: To investigate the potential use of polymeric nanoparticles for the delivery of antisense oligonucleotides in HIV-1-infected cell cultures. METHODS: Phosphorothioate oligonucleotides were encapsulated into poly (D,L-lactic acid) nanoparticles. Two models of infected cells were used to test the ability of nanoparticles to deliver them. HeLa P4-2 CD4+ cells, stably transfected with the beta-galactosidase reporter gene, were first used to evaluate the activity of the oligonucleotides on a single-round infection cycle. The acutely infected lymphoid CEM cells were then used to evaluate the inhibition of the viral production of HIV-1 by the oligonucleotides. RESULTS: The addition to infected CEM cells of nanoparticles containing gag antisense oligonucleotides in the nanomolar range led to strong inhibition of the viral production in a concentration-dependent manner. Similar results were previously observed in HeLa P4-2 CD4+ cells. Nanoparticle-entrapped random-order gag oligonucleotides had similar effects on reverse transcription. However, the reverse transcriptase activity of infected cells treated with nanomolar concentrations of free antisense and random oligonucleotides was not affected. CONCLUSIONS: These results suggest that poly (D,L-lactic acid) nanoparticles may have great potential as an efficient delivery system for oligonucleotides in HIV natural target cells, i.e., lymphocytic cells.

Internalization of poly(D,L-lactic acid) nanoparticles by isolated human leukocytes and analysis of plasma proteins adsorbed onto the particles.

The objective of this work was to investigate the interactions of poly(D,L-lactic acid) nanoparticles prepared by a recently developed salting-out process, with lymphocytes and monocytes isolated from healthy human donors. Nanoparticles were labeled with a hydrophobic fluorescent dye and incubated with lymphocytes and monocytes, and their uptake was followed by flow cytometry in the presence and absence of plasma. Plasma protein adsorption increased nanoparticle uptake by monocytes, whereas a decrease of cellular binding of the nanoparticles to lymphocytes was noted. The cellular uptake for both cell types consisted in a passive adsorption and in an energy-requiring process, because the cells became 2-3 times more fluorescent when the incubation temperature was increased from 4 to 37 degrees C. When nanoparticles were coated with polyethylene glycol 20,000, uptake by monocytes decreased by 43 and 78% in phosphate-buffered saline and plasma, respectively; a similar decrease in nanoparticle uptake was observed for lymphocytes. Two-dimensional gel electrophoresis was performed to identify the plasma opsonins adsorbed onto the nanoparticle surface. Protein mappings for uncoated and polyethylene glycol-coated nanoparticles differed for two spot series. These spots, not yet clearly identified, may represent specific apolipoproteins involved in the metabolism of human lipoproteins, indicating the possible involvement of specific receptors in the uptake of the nanoparticles.

Formulation and lyoprotection of poly(lactic acid-co-ethylene oxide) nanoparticles: influence on physical stability and in vitro cell uptake.

PURPOSE: To investigate the feasibility of producing freeze-dried poly(ethylene oxide) (PEO)-surface modified nanoparticles and to study their ability to avoid the mononuclear phagocytic system (MPS), as a function of the PEO chain length and surface density. METHODS: The nanoparticles were produced by the salting-out method using blends of poly(D,L-lactic acid) (PLA) and poly(D,L-lactic acidco-ethylene oxide) (PLA-PEO) copolymers. The nanoparticles were purified by cross-flow filtration and freeze-dried as such or with variable amounts of trehalose as a lyoprotectant. The redispersibility of the particles was determined immediately after freeze-drying and after 12 months of storage at -25 degrees C. The uptake of the nanoparticles by human monocytes was studied in vitro by flow cytometry. RESULTS: PLA-PEO nanoparticles could be produced from all the polymeric blends used. Particle aggregation after freeze-drying was shown to be directly related to the presence of PEO. Whereas this problem could be circumvented by use of trehalose, subsequent aggregation was shown to occur during storage. These phenomena were possibly related to the specific thermal behaviours of PEO and trehalose. In cell studies, a clear relationship between the PEO content and the decrease of uptake was demonstrated. CONCLUSIONS: The rational design of freeze-dried PEO-surface modified nanoparticles with potential MPS avoidance ability is feasible by using the polymer blends approach combined with appropriate lyoprotection and optimal storage conditions.

Photodynamic therapy of tumours with hexadecafluoro zinc phthalocynine formulated in PEG-coated poly(lactic acid) nanoparticles.

Hexadecafluoro zinc phthalocyanine (ZnPcF16), a second-generation sensitizer for the photodynamic therapy (PDT) of cancer, was formulated in polyethylene-glycol-coated poly(lactic acid) nanoparticles (PEG-coated PLA-NP) and tested in EMT-6 tumour-bearing mice for its photodynamic activity. The tumour response was compared to that induced by the same dye formulated as a Cremophor EL (CRM) emulsion. Formulation in the biodegradable NP improved PDT response of the tumour while providing prolonged tumour sensitivity towards PDT.