Fabrication, characterization, and evaluation in drug release properties of magnetoactive poly(ethylene oxide)-poly(L-lactide) electrospun membranes.

The fabrication of electrospun magnetoactive fibrous nanocomposite membranes based on the water-soluble and biocompatible poly(ethylene oxide) (PEO), the biocompatible and biodegradable poly(L-lactide) (PLLA) and preformed oleic acid-coated magnetite nanoparticles (OA.Fe3O4) is reported. Visualization of the membranes by electron microscopy techniques reveals the presence of continuous fibers of approximately 2 µm in diameter, with the magnetic nanoparticles being evenly distributed within the fibers, retaining at the same time their nanosized diameters (≈ 5 nm). Thermal gravimetric analysis measurements suggest that the magnetic nanoparticles embedded within the polymer fibers affect favorably the thermal stability of the membranes. Moreover, assessment of their magnetic characteristics by vibrating sample magnetometry discloses tunable superparamagnetic behavior at ambient temperature. For the first time, the biocompatibility and biodegradability of PEO/PLLA and the tunable magnetic activity of the OA.Fe3O4 are combined in the same drug delivery system, with N-acetyl-p-aminophenol (acetaminophen) as a proof-of-concept pharmaceutical. Furthermore, their heating ability under alternating current (AC) magnetic field conditions is evaluated using frequency of 110 kHz and corresponding magnetic field strength of 25 mT (19.9 kA/m). Consequently, these magnetoactive fibrous nanocomposites exhibit promising characteristics for future exploitation in magnetothermally triggered drug delivery.

Mechanisms of glucose-enhanced extracellular matrix accumulation in rat glomerular mesangial cells.

In view of the importance of mesangial extracellular matrix (ECM) accumulation in the pathogenesis of diabetic glomerulosclerosis, we investigated 1) the effects of high glucose on ECM production by rat glomerular mesangial cells in culture (study A) and 2) the mechanisms underlying these effects, particularly the role of high sugar levels irrespective of intracellular metabolism (study B1) and of excess glucose disposal via the polyol pathway and associated biochemical alterations (study B2). Cells were cultured for 4 weeks, through six to eight passages, under the experimental conditions indicated below and, at each passage, the levels of fibronectin (FN), laminin (LAM), and collagen types I (C-I), III (C-III), IV (C-IV), and VI (C-VI) in media and cell extracts were quantified by an enzyme immunoassay. In study A, medium and cell content of matrix were assessed, together with [3H]leucine and [3H]thymidine incorporation into monolayers, polyol, fructose, and myo-inositol levels and the cytosolic redox state, in cells grown in high (30 mM) D-glucose or iso-osmolar mannitol versus cells cultured in normal (5.5 mM) D-glucose. FN, LAM, C-IV, and C-VI accumulation, but not C-I and C-III accumulation, was increased by 30 mM glucose, but not by iso-osmolar mannitol, when compared with 5.5 mM glucose, starting at week 2 and, except for C-VI, persisting throughout the remaining 2 weeks, whereas no change was observed in the measured indexes of total protein synthesis and DNA synthesis/cell proliferation. At any time point, polyol levels were increased, whereas myo-inositol was reduced by high glucose; in cells grown under elevated glucose concentrations, the lactate/pyruvate (L/P) ratio, an index of the cytosolic redox state, progressively increased. In study B1, the effects of high D-glucose were compared with those of iso-osmolar concentrations of sugars that are partly or not metabolized but are capable of inducing nonenzymatic glycosylation, such as D-galactose and L-glucose, and of mannitol, which does not enter the cell. Both D-galactose and L-glucose, but not mannitol, partly mimicked D-glucose-induced ECM overproduction. Although D-galactose is metabolized via the polyol pathway and alters the cytosolic redox state, ECM changes induced by high galactose were not prevented by the use of an aldose reductase inhibitor (ARI), Alcon 1576 (14 microM).(ABSTRACT TRUNCATED AT 400 WORDS)

Tensile mechanical properties and hydraulic permeabilities of electrospun cellulose acetate fiber meshes.

The mechanical properties and hydraulic permeabilities of biomaterial scaffolds play a crucial role in their efficacy as tissue engineering platforms, separation processors, and drug delivery vehicles. In this study, electrospun cellulose acetate fiber meshes of random orientations were created using four different concentrations, 10.0, 12.5, 15.0, and 17.5 wt % in acetone or ethyl acetate. The tensile mechanical properties and the hydraulic permeabilities of these meshes were measured, and a multiscale model was employed to predict their mechanical behavior. Experimentally, the elastic modulus ranged from 3.5 to 12.4 MPa depending on the polymer concentration and the solvent. Model predictions agreed well with the experimental measurements when a fitted single-fiber modulus of 123.3 MPa was used. The model also predicted that changes in fiber alignment may result in a 3.6-fold increase in the elastic modulus for moderately aligned meshes and a 8.5-fold increase for highly align meshes. Hydraulic permeabilities ranged from 1.4 x 10(-12) to 8.9 x 10(-12) m(2) depending on polymer concentration but not the choice of solvent. In conclusion, polymer concentration, fiber alignment, and solvent have significant impact on the mechanical and fluid transport properties of electrospun cellulose acetate fiber meshes.