Pain relief can be painful.

Mandibular nerve block is periodically used procedure used to treat neuralgic pain in the distribution of trigeminal nerve. It is a commonly performed block in outpatient settings at our institute. We present a case of an elderly edentulous patient with trigeminal neuralgia who suffered recurrent temporomandibular joint (TMJ) dislocation following mandibular nerve block. The patient presented with complaints of severe pain, inability to close mouth, and eat food since 2 days. Anterior closed reduction of TMJ resulted in reduction of joint and immediate pain relief. However, the maneuver failed due to recurrent dislocation of the joint. A Barton dressing was applied to prevent another dislocation. This was followed by autologous blood injection into the joint. This case focuses on the preponderance of clinical evaluation and accentuates the need for additional forethought to be taken during pain procedures, particularly in the geriatric population.

Age changes of jaws and soft tissue profile.

Age-related changes of jaws and soft tissue profile are important both for orthodontists and general dentists. Mouth profile is the area which is manipulated during dental treatment. These changes should be planned in accordance with other components of facial profile to achieve ultimate aim of structural balance, functional efficacy, and esthetic harmony. Through this paper, the authors wish to discuss age changes of the hard and soft tissues of human face which would help not only the orthodontists but also oral surgeons, prosthodontists, pedodontists, and general dentists.

Stabilizing bony plate in guided endodontic surgery using an innovative approach.

Endodontic microsurgery in tandem with advanced radiographic techniques has led to the emergence of guided surgeries. Preservation of the cortical bone to enhance the healing and stabilization of tissues surrounding the tooth of concern can now be facilitated by bone cement used in the field of orthopedics. This case report details a guided endodontic surgery technique in 17 years old where a traumatic infliction leads to a phoenix abscess. The technique elaborated emphasizes on the three-dimensional printing of a surgical template with the help of cone-beam computed tomography, followed using a medical-grade bone cement in the most minimal manner to reposition the buccal cortical bone. A 12-month-old follow-up revealed the patient to be asymptomatic with a flawless periapical region radiographically. This case testifies that the optimum use of available biomedical material in surgical endodontics can assure a predictable prognosis.

Cone-beam computed tomographic analysis of canal convolution in mesial root of mandibular second molars and a proposed new classification.

Aim: The aim is to evaluate the anatomical characteristics of mesiolingual and mesiobuccal canals in mandibular second molars particularly in terms of its exit direction, distance of confluence from the minor constriction, and the angle of confluence. Materials and Methods: The cone-beam computed tomography images of hundred mandibular second molars were analyzed. Endodontically treated teeth and those with anatomical variations such as C-shaped canal configuration were excluded from this study. The distance of the confluence from the minor constriction, angle of confluence, and the exit direction of the mesiobuccal and the mesiolingual canals were assessed. Data were analyzed using an independent t-test. Results: The course of the mesiobuccal and mesiolingual canals beyond the confluence was towards the center of the root. The average angle of confluence was 32.75°-35.28°. The average distance of confluence from the minor constriction was 2.19 to 2.68 mm. The mesiolingual canal was straighter whereas the mesiobuccal canal had a tortuous course. Considering the results of the present study, a new classification has been proposed for the root canal morphology of the mesial root of mandibular second molars. Conclusion: The variation in the morphology of mandibular second molars highlights that the mesiolingual canal presented a mild curvature through and beyond the confluence when compared to the mesiobuccal canal which exhibited a tortuous course through the confluence.

Technique to incorporate mathematical principles into esthetic dentistry.

Space closure in the maxillary anterior segment using direct composite is one of the most challenging esthetic procedures. The challenge lies in determining and achieving the correct dimensions. Various mathematical principles that have been observed in esthetically pleasing smiles can be applied to simplify the procedure and achieve symmetry while treating spaced dentition. The aim was to devise a technique for simplifying the application of mathematical principles in esthetic dentistry and improve the predictability and accuracy of the procedure of space closure using direct composite.

Endodontic management of an aberrant germinated composite odontome: A case report.

To describe the endodontic treatment of a germinated composite odontome with atypical internal anatomy. A 35-year-old male presented with pain in the left mandibular second molar region. Intraoral examination and Cone-Beam Computed Tomography (CBCT) revealed a rare case of a germinated composite odontome with a 3-2-1 Vertucci configuration in the mesial root. Occlusal morphology and mesial root configuration required modifications in methods of isolation and access cavity preparation. Contemporary tools like magnification, ultrasonics and controlled memory rotary files were essential for executing the treatment plan. The tooth was functional at 18 months follow up and radiographs revealed no abnormality.

Evaluation of volumetric substance loss and precision in targeted endodontic re-treatment with guided versus conventional access cavity preparations: An in vitro study.

Introduction: Root canal retreatment is typically viewed as an "all or nothing" approach. Whether there is periapical pathosis or not, it is advised that all restorative and obturation materials be removed from all roots. Selective root retreatment, a new therapeutic strategy, allows retreatment to be restricted to a single root or multiple roots exhibiting periapical pathosis. To address the issues, "guided endodontics," a unique guided technique for the preparation of apically extended access cavities, was introduced. Materials and Methods: In this in vitro experimental study, 22 freshly extracted two-rooted maxillary first premolars were selected and divided into two groups (n = 11). Pretreatment cone-beam computed tomography imaging of all teeth was performed. Root canal treatment was performed for all samples followed by postendodontic composite restorations with the occlusal stamp technique. Then targeted endodontic retreatment (TER) was done with the conventional method and guided method respectively. The tooth substance loss was measured and evaluated using Ez3D-i-3D-software (VATECH) and work precision was determined by calculating the dentinal loss. Statistical data analysis was done by Independent t-test for substance loss measurement and Chi-square test was used to measure the dentinal loss. Results: TER with conventional method showed significantly higher substance loss with t = 4.591 (P < 0.05) and significantly higher dentinal loss measured in conventional method (P < 0.05). Conclusion: In comparison to traditional TER, TER using a customized bur and three dimensions (3D)-guide results in much less substance loss. The dentinal loss was much lower in 3D-guided approach.

Cyclic and spontaneous movement of a fractured and extruded instrument back into the root canal: A rare case report.

Retreatment of endodontically involved teeth may require the removal of obstruction from root canal space. Instrument fracture is an undesirable and stressful incident which can negatively affect the prognosis of the tooth. Any corrective step taken should be performed with utmost care to prevent extrusion of the fragment into periapex. This case report describes a rare occurrence of movement of a fractured instrument during inter-appointment period. A previously treated left mandibular first molar with a fractured instrument was taken up for retreatment. During the course of treatment, the fractured fragment which was previously located in the apical third of the distal canal was dislodged into the periapical region. However, it was found that fragment moved back inside the canal after the inter-appointment period. The same sequence of events repeated before the instrument could be retrieved. Hydrostatic and vascular pressure build due to periapical inflammation could be cited reasons for such a movement.

Internal root resorption: A rare complication of vital pulp therapy using platelet-rich fibrin.

Internal root resorption (IRR) is a specific type of pulp disease categorized by the loss of dentin as a consequence of the action of clastic cells stimulated by pulpal inflammation. It is one of the rare complications following a vital pulp therapy (VPT) procedure. Reported here is a case of IRR as a complication of VPT platelet-rich fibrin pulpotomy procedure in a mature permanent tooth. Diagnosed using cone-beam computed tomography and management of the resorptive defect using biodentin with a follow-up of 1 year.

Comparative evaluation of novel customized cushees during rubber dam isolation using self-designed evaluation criteria: A randomized clinical study.

BACKGROUND: Rubber dam plays essential role in dentistry and various modifications have been done to improve patients acceptance and to eliminate the discomfort caused due to clamps. AIM: Clinical evaluation of efficacy and postoperative outcome of metal clamps with customized cushions and standard metal clamps during rubber dam isolation procedures. MATERIALS AND METHODS: After institutional ethical approval and informed consent total 64 patients were randomly assigned in two groups. Group A - rubber dam metal clamp with customized cushees (n = 32), Group B - rubber dam with standard metal clamp (n = 32). After selection of appropriate clamp for Group A, Customized cushions were prepared and restoration was performed. The evaluation was done using self-designed assessment criteria which included postoperative pain, rubber dam slippage, trauma to gingival and adjacent tissues and sealing ability of both the groups. STATISTICAL ANALYSIS USED: Chi-square value was calculated with SPSS software version 18.0. RESULTS: There was statistically significant difference between postoperative pain, rubber dam slippage, trauma to gingival tissues (P < 0.001) with reduced postoperative pain. CONCLUSION: Cushions have played significant role in reducing postoperative pain, trauma to the gingival tissue and slippage of rubber dam clamp compared to standard metal clamps.

A 5 years' follow-up of root anatomy-based maturogenesis achieved in infected immature molars using regenerative techniques - A case series.

Infected immature molars are commonly encountered but seldom are they treated using principles of regenerative endodontics. The case series describes a feasible technique for attempting maturogenesis based on molar tooth anatomy. A total of 9 infected immature molars in the patients between 6 and 18 years of age were treated as part of this case series. All the canals were disinfected using 3% sodium hypochlorite and 17% ethylenediaminetetraacetic acid following minimal instrumentation. After using triple antibiotic paste for 3 weeks, bleeding was induced in mesial or constricted canals and platelet-rich fibrin was placed in distal or open wide canals till the orifice level. Coronal seal was obtained using mineral trioxide aggregate. Outcome was evaluated clinically and radiographically at the periods of 3, 6, 12, 24, 36, and 60 months. All the teeth showed continued root development and maintained functionality but none responded to vitality testing. Anatomical aspects of individual roots within a tooth can be utilized as a guide to decide the appropriate approach for attempting maturogenesis in a molar. Root changes can be expected even if the pulp vitality is not restored.

Three-dimensional printing: A revealing pathway to an unpredictable maze.

Three-dimensional (3D) technology has gained wide acceptance in dentistry. It has been used for treatment planning and surgical guidance. This case report presented a novel treatment approach to remove and preserve the cortical bone and root-end resection during periapical surgery with the help of cone-beam computed tomography (CBCT), computer-aided design, and 3D printing technology. A 22-year-old male patient presented with a large periapical lesion in the right maxillary central and lateral incisors was referred for endodontic surgery. The data acquired from a preoperative diagnostic CBCT scan and an intraoral scan were uploaded into surgical planning software and matched. A template that could be used to locate root ends and lesion areas was virtually designed based on the data and was fabricated using a 3D printer. With the guidance of the template, the overlying cortical bone was precisely removed and preserved, and apicectomy was performed. The patient was clinically asymptomatic at a 6-month follow-up review. Six months after the surgery, the lesion was healing well, and no periapical radiolucency was observed on radiographic examination. The digitally designed directional template worked in all aspects to facilitate the periapical surgery as anticipated. The root ends were accurately located and resected. The surgical procedure was simplified, and the treatment efficiency was improved. This technique minimized the damage and reduced iatrogenic injury.

Ultrasound-guided autologous blood injection in patients with chronic recurrent temporomandibular joint dislocation.

OBJECTIVE: To evaluate the accuracy and effectiveness of ultrasound (US) guided autologous blood injection (ABI) for the treatment of chronic recurrent TMJ dislocation. DESIGN: Prospective cohort study. SETTING: Centre for medical education and research. PARTICIPANTS OR ANIMALS SPECIMENS CADAVERS: Ninteen patients with chronic recurrent TMJ dislocation (Fifteen bilateral and fourteen unilateral). INTERVENTIONS: Autologous blood injected, 2ml in superior joint space (SJS) and 1 ml in peri-capsular tissue (PT) under ultra sound guidance. MAIN OUTCOME MEASURES: Reduction in number of dislocation episodes, maximal mouth opening, pain (visual analogue scale) and TMJ sounds (present or absent) at the end of 2 weeks, 3 months, 6 months and 1 year. RESULTS: At 2 weeks post operatively 18 patients (95%) were asymptomatic only one patient (5%) complained of Recurrence of dislocation and was treated successfully by a 2nd injection. At subsequent follow up visits none reported dislocation. CONCLUSIONS: US guided ABI for patients with chronic recurrent TMJ dislocations serves as an alternative, minimally invasive, highly effective and accurate modality of treatment since it includes exposure without radiation, real-time visualization of soft tissues, visualization of the needle tip advancement, local anesthetic spread relevant to the surrounding structures which can be performed on an outpatient basis.

Deducing a surgical dilemma using a novel three dimensional printing technique.

Persistent apical periodontitis even after nonsurgical retreatment demands for a surgical approach. This requires a thorough diagnosis and planning to eliminate the pathology and induce healing. This is sometimes challenging when the pathology is present in close relationship to the vital structures. In such cases, modern, sophisticated technology such as three-dimensional (3D) printing can come very handy in patient education as well as for planning and mock-up preparation of the surgery. In this case, a nonhealing persistent apical periodontitis in relation to 16 was surgically treated. However, the pathology was in close association with the maxillary sinus hence fused deposition modeling-based 3D printed models were fabricated for patient education and to locate and determine the extent of the lesion. This was followed by the surgical enucleation of the lesion and apicectomy of mesiobuccal and distobuccal roots and mineral trioxide aggregate retro-filling and as the symptoms subsided after the follow-up full coverage metal crown was fabricated and cemented. This technology has opened a new horizon for the use of 3D printing in conjugation with endodontic principles for more predictable endodontic success.

Literature review of 86 cases of mandibular ameloblastic carcinoma.

Ameloblastic carcinoma is considered to be a rare epithelial malignant neoplasm of odontogenic origin occurring mainly in the mandible. Ameloblastic carcinoma has been a topic of controversy regarding management from past many years. We reviewed 86 cases of mandibular ameloblastic carcinoma from 1981 to 2014, on the basis of the electronic search of peer-reviewed journals in MEDLINE (PubMed) database. Age, sex, tumor size, treatment delivered, recurrence, metastasis, follow-up period, and dead/alive status are tabulated, and the data are analyzed. The mean age was 43.47 years with standard deviation ± 21.09. The age range was between 15 and 91 years, and male to female ratio was 2.18:1. Knowledge gained from the present review would help in establishing the best therapeutic options for ameloblastic carcinoma, and it also encourages the further reporting of ameloblastic carcinoma.

Piezoelectric harvest of osteo-odonto-lamina in modified osteo-odonto keratoprosthesis: A maxillofacial perspective.

PURPOSE: We describe the piezo-osteotomy feasibility in rehabilitation and harvesting of osteo-odonto lamina in modified osteo-odonto keratoprosthesis (MOOKP) surgery. Surgery was evaluated regarding operative technique and success of the keratoprosthesis (KPros) in terms of perception to light (+ve) to finger counting (+ve). MATERIALS AND METHODS: This retrospective cohort study included 12 patients undergone MOOKP surgery procedures. Harvesting of osteo-odonto-lamina was performed using piezosurgical osteotomy during 2007-2012. RESULTS: The mean follow up was 34 months (range 24-48 months). Of the 12 patients six patients had vision ≥6/12, four patients had vision <6/12, but >6/60 and one patients had vision ≤6/60. KPros was retained and functional in all the eyes after a minimum follow up of 24 months. There was mucosal overgrowth over the optical cylinder occurred in two cases over 4 years follow up which was corrected with trimming. Postoperative complication at donor site was seen in three cases, two cases with exposure of root of adjacent teeth and oro antral fistula in one. CONCLUSIONS: This study suggests that piezoelectric harvest of osteo-odonto-lamina is a valuable surgical option in patients undergoing MOOKP surgery, resulting in high success rate with less complication.

Accessory branch of canalis sinuosus mimicking external root resorption: A diagnostic dilemma.

The aim of this study was to recognize the importance of canalis sinuosus in Endodontics. A 60-year-old male patient reported with the chief complaint of pain and swelling in upper front tooth region for 2 weeks with a history of trauma 21 years back. Clinical examination revealed fractured tooth 21 (maxillary left central incisor) with an associated sinus tract. Radiographic examination revealed diffuse periapical radiolucency in relation to tooth 21 and external resorptive defect in apical third of the root of tooth 11 (maxillary right central incisor). Cone-beam computed tomography advised to plan surgical treatment for the same disclosed the presence of an anatomic variation of canalis sinuosus. The location and course of this canal illuded as a resorptive defect, which is a very rare occurrence. This led to a change in diagnosis with relation to tooth 11 and treatment plan was formulated accordingly.

Comprehensive and Conservative Management of Talon Cusp: A New Technique.

Talon cusp is a common dental anomaly affecting maxillary central incisors. Gradual grinding of this additional cusp is commonly followed now. Advocated below is a new technique explaining the use of air abrasion and putty index during the stepwise reduction of the cusp. The technique is advantageous in preventing patient discomfort and tracking the amount of reduction in a predictable way.

Misconceptions Regarding Autogenous Tooth Transplantations: A Survey.

AIM: The aim of this cross-sectional study was to assess knowledge regarding autogenous tooth transplantation among oral and maxillofacial surgery (OMFS) residents in India. STUDY DESIGN: The sample of the survey consisted of Indian OMFS post-graduate residents attending the "1st Asian Oral and Maxillofacial Surgery PG Convention" held from 29th to 31st August, 2013 at Mangalore, India. Questions were asked regarding the participant's preferred tooth replacement modality, the transplantation procedure (socket preparation and stabilization of transplanted tooth); fate of the transplanted tooth (pulpal and periodontal fate) and the possibility of replacing second molars with such procedure, cross-arch transplantation and transplantation after new-socket preparation. The responses of 1st, 2nd and 3rd year residents were assessed for statistical significant difference using Fishers exact test. RESULTS: Out of 434 residents surveyed using a pre-tested self-administered questionnaire, 287 residents responded (response rate 66 %). 74 % were aware of the possibility of autogenous third molar transplantation. Only 24 % believed a new periodontal ligament would form around the transplanted tooth. Misconceptions regarding pulp healing, socket preparation and tooth stabilization and new alveolus transplantation were also seen. 44 % had never seen the procedure and 74 % had never performed it themselves. No statistical significant difference was seen among the responses classified according to the year of training. CONCLUSION: OMFS residents were found to have inadequate knowledge regarding autogenous tooth transplantation. Tooth transplantation needs to be included in the dental curriculum and standard OMFS textbooks with practical training in post-graduation period.