Effect of splinting scan bodies on the trueness of complete-arch digital implant scans with 5 different intraoral scanners.

STATEMENT OF PROBLEM: The absence of fixed reference points can affect the trueness of complete-arch intraoral digital implant scans. The effect of splinting intraoral scan bodies (ISBs) or the inclusion of artificial landmarks (AL) on the trueness of complete-arch digital implant scans is still unclear. PURPOSE: The purpose of this study was to analyze the effect of splinting ISBs or the inclusion of AL on the trueness of complete-arch digital implant scans with 5 intraoral scanners (IOSs). MATERIAL AND METHODS: Six tissue-level dental implants (Straumann Tissue Level) were placed in an edentulous patient, and the correspondent definitive cast was digitized with a desktop scanner (IScan4D LS3i) to obtain the reference digital cast. Digital scans (n=10) were performed with 5 IOSs: TRIOS 4, Virtuo Vivo, Medit i700, iTero Element 5D, and Cerec Primescan. Three different scanning techniques were evaluated: conventional (cIOSs), splinted (sIOSs), and AL (AL-IOSs). The scan data obtained were imported into a metrology software program and superimposed to the reference digital cast by using a best-fit algorithm. The overall deviations of the positions of the ISBs were evaluated by using the root-mean-square (RMS) error (α=.05). RESULTS: The mean ±standard deviation trueness values for the cIOSs, sIOSs, and AL-IOSs groups were 48 ±8 µm, 53 ±7 µm, and 49 ±11 µm, respectively, with no statistically significant differences (P=.06). Significant differences were found for the IOSs used with each technique (P<.001). Primescan (27 ±4 µm cIOSs; 28 ±3 µm sIOSs; 31 ±3 µm AL-IOSs) showed significantly higher trueness than iTero 5D (47 ±5 µm cIOSs; 47 ±4 µm sIOSs; 50 ±6 µm AL-IOSs) (P=.002) and TRIOS 4 (93 ±18 µm cIOSs; 76 ±18 µm sIOSs; 107 ±13 µm AL-IOSs) (P=.001) for all techniques. In addition, no significant differences were found between the techniques by using iTero 5D or Primescan (P=.348 and P=.059, respectively). CONCLUSIONS: The cIOSs, sIOSs, and AL-IOSs techniques showed similar trueness. The IOS used influenced the trueness of complete-arch digital implant scans.

Evaluation of the clinical behavior of 2 different materials for implant-supported interim fixed partial prostheses: A randomized clinical trial.

STATEMENT OF PROBLEM: Clinical studies about interim implant-supported prostheses made of polymethylmethacrylate (PMMA) and polyoxymethylene (POM) have been limited to clinical reports or studies on the survival of implants subjected to immediate loading without evaluating the influence of the material used. PURPOSE: The purpose of this randomized clinical trial was to evaluate the clinical performance of posterior resin interim implant-supported fixed partial dentures (FPDs) made of 2 different computer-aided design and computer-aided manufactured (CAD-CAM) materials: PMMA and POM. MATERIAL AND METHODS: A total of 21 participants received 49 interim implant-supported FPDs. The same participant received the PMMA as part of the control group and the POM as part of the experimental group. The restorations were evaluated at 1 week and 3 and 6 months after their placement, using the California Dental Association (CDA) quality-evaluation index. Their functional wear and color stability were also evaluated. Data were analyzed by using nonparametric statistics (α=.05). RESULTS: The CDA criteria showed that the PMMA group performed better than the POM group in the surface and color parameter (P<.05). Fractures at the implant connection level were observed in 10 prostheses. The number of fractures was significantly higher in internal conical connection implants (P<.05). The statistical analysis of color stability showed values of ΔE*ab of 7.18 for PMMA and 8.58 for POM, without significant differences between materials. Concerning the wear evaluation, a significant increase in the wear of both materials was found at 6 months of functioning (P<.05). No significant differences were found within materials. CONCLUSIONS: Within a 6-month observation period, PMMA interim implant-supported FPDs performed better than POM in the surface and color parameter. Entirely polymer posterior implant-supported FPDs with internal conical connection implants appear to be more susceptible to fracture.

Photogrammetric and Intraoral Digital Impression Technique for the Rehabilitation of Multiple Unfavorably Positioned Dental Implants: A Clinical Report.

The aim of this clinical report is to describe the use of the photogrammetric system and intraoral scanning as a reliable technique to record the 3-dimensional implant positions of a full-arch maxillary implant-supported fixed rehabilitation in which the implants were unfavorably positioned. The stereo camera of the photogrammetric system was used to capture the 3-dimensional panoramic position of the implants. The information on soft tissues was obtained with an intraoral scanner. Then, the 2 digital files (standard tessellation language [STL] files) were subsequently superimposed using a best-fit alignment function to generate the definitive digital model with information on teeth, soft tissues, and implants.

Influence of Implant Scanbody Material and Intraoral Scanner on the Accuracy of Complete-Arch Digital Implant Impressions.

PURPOSE: To evaluate the accuracy of complete-arch digital implant impressions using different intraoral scan body (ISB) materials and intraoral scanners (IOSs). MATERIALS AND METHODS: The mandibular dental cast of an edentulous patient with six tissue-level dental implants was used as master cast. Two types of ISBs, polyether-ether-ketone (PEEK) and plasma-coated medical titanium, were used with five IOSs: TRIOS 4 (T4), Virtuo Vivo (VV), Medit i700 (Mi700), iTero5D (i5D), and Primescan (PS). To assess accuracy, digital impressions (n=10) with each IOS and ISB were compared to two reference models obtained by digitizing the master cast with each ISB type using a desktop scanner (IScan4D LS3i) and importing the scan data into metrology software (Geomagic Control X). Root-mean-square (RMS) error was employed to evaluate overall deviation values (trueness), while precision was determined using the standard deviation (SD) of RMS values. Statistical significance was set at P < 0.05. The Kruskal-Wallis test was used, followed by the pairwise comparison method with Bonferroni correction (α=.05). RESULTS: An interaction between ISB material and IOS was found (P=0.001). Plasma-coated medical titanium ISBs demonstrated significantly higher trueness and precision compared to PEEK ISBs with T4 (P=0.001), Mi700 (P=0.001; P=0.004), and i5D (P=0.001). Conversely, VV exhibited higher trueness and precision values with PEEK ISBs (P=0.005; P=0.003). PS provided the highest trueness and precision regardless of the ISB material (P=0.912). T4 showed the lowest accuracy for PEEK ISBs, and VV for plasma-coated medical titanium ISBs. CONCLUSION: Except for PS, all IOSs showed significant differences between ISB materials. PS demonstrated the highest accuracy with both ISB materials, whereas T4 had the lowest accuracy for PEEK ISBs, and VV showed the lowest accuracy for plasma-coated medical titanium ISBs.

Clinical performance of monolithic CAD/CAM tooth-supported zirconia restorations: systematic review and meta-analysis.

PURPOSE: The purpose of this systematic review was to evaluate the survival rate, biological complications, technical complications, and clinical behavior of single crowns supported by teeth made up in monolithic zirconia with CAD/CAM technology. STUDY SELECTION: An extensive electronic search was conducted through Medline/PubMed, Embase, and Cochrane Library databases. Additional manual search was performed on the references of included articles to identify relevant publications. Two reviewers independently performed the selection and electronic and manual search. RESULTS: From nine articles included, there was a total of 594 participants and 1657 single-tooth restorations with a mean exposure time of 1.07 years, and follow-up period between 0.3 and 2.1 years. All studies showed a moderate level of quality, with a consequent moderate possibility of associated bias, using the Newcastle-Ottawa Scale (NOS), with survival rate (SR) ranging between 91% to 100%. Bleeding on probing (BOP) were reported with an average value of 29.12%. Marginal integrity showed high success rate values for the observation periods, except for one that included patients with bruxism which obtained a SR of 31.60%. Failures and/or fractures, mostly total and requiring replacement, were observed in three studies. Linear regression showed that there was no statistical correlation between survival rate and type of cementation and the average years of follow-up (p=0.730 e p=0.454). There was high heterogeneity between studies (I2 = 93.74% and Q = 79.672). CONCLUSION: Within the limitation of this study, monolithic zirconia might be considered as a possible option for restoring single crowns, especially in the posterior zone.

A prospective non-randomised study to compare oral trauma from laryngoscope versus laryngeal mask insertion.

BACKGROUND: Prospective studies evaluating the incidence of dental injuries in anaesthesia are scarce or absent. The aim of this study was to compare the incidence of oral trauma in patients submitted to laryngoscopy and orotracheal intubation with those anaesthetized with a laryngeal mask. MATERIAL AND METHODS: This observational study was performed in the University Hospital, with blind evaluation. We evaluated 121 patients older than 18 years old who were submitted to elective surgery under general anaesthesia. Patients were excluded if they were pregnant, underwent surgery of the mouth or required nasal intubation. Laryngoscopy and orotracheal tube were used in 70 patients and laryngeal mask in 51. Twelve to 24 h before anaesthesia and after surgery, all patients underwent a detailed oral examination performed by an anaesthesiology and a senior dentist, both blind to anaesthetic management details. Injuries of the teeth were diagnosed based on WHO's classification system modified by Andreasen. RESULTS: Oral injuries were found in 84.1% of the patients after laryngoscopy and 19.6% after laryngeal mask insertion (P < 0.001). Corresponding values for teeth injuries were, respectively, 38.6% and 2.0% (P < 0.001). The great majority were enamel fractures of the maxillary incisors. This means that patients submitted to laryngoscopy had a significantly higher incidence of oral injuries compared with those having laryngeal mask insertion (unadjusted OR 21, 99; CI 0.95: 8.55-56.55). CONCLUSION: Minor oral trauma is significantly more frequent after endotracheal intubation than after use of the laryngeal mask. This is true for injuries of the teeth, inferior lip and tongue. Further studies are needed to evaluate on a long-term basis the clinical relevance of the dental injuries we found.

Biocompatibility and Effectiveness of a Novel, Organic Olive Oil-Based Denture Adhesive: A Multicenter Randomized and Placebo-Controlled Clinical Trial.

To assess the clinical efficacy of a novel, organic olive oil-based denture adhesive and its effect on Candida albicans growth in maxillary edentulous individuals wearing complete dentures, individuals were selected from two dental schools in Portugal and Spain. Twenty-eight complete dentures were relined, following a standardized protocol. The novel product (test) was compared with a commercialized adhesive (control) and Vaseline (placebo) randomly assigned in a cross-study design. The retention resistance was measured with a gnathometer and a dynamometer. The patients related outcome evaluations with a five-point questionnaire, and the Candida albicans growth in a Sabouraud dextrose agar (SDA) medium was used to evaluate differences between the placebo and experimental product. Twenty-three participants were included. The dynamometer evaluation showed significant differences between not using a denture adhesive and using either (experimental, p = 0.03; control, p = 0.04) and no significant differences between the two adhesives (p > 0.05). In the subjective analysis, the experimental adhesive showed a significantly longer effectiveness (p = 0.001), and the control reported better results in taste (p = 0.03) and in chewing (p = 0.001). The test adhesive showed better (p < 0.001) Candida albicans growth inhibition. The experimental adhesive showed longer effectiveness than the control and the placebo with a better inhibition capacity for the growth of Candida albicans. Patients reported better abilities for speech, chewing, taste, and retirement in the control adhesive.

Correlation between alveolar bone morphology and volumetric dimensional changes in immediate maxillary implant placement: A 1-year prospective cohort study.

BACKGROUND: After a single tooth extraction, remodelling processes are initiated and morphological changes occur in the alveolar bone. It has been suggested that implant placement in a fresh extraction socket may partly reduce the alveolar ridge contraction and that several factors like the thickness of the buccal bone wall and the size of the gap between the implant and the facial bone wall may play a role on peri-implant tissues dimensional alterations. METHODS: Twenty-six patients treated with single-tooth maxillary implants were included in this study. A CBCT exam allowed to access the initial buccal bone thickness (BT). Digital impressions were taken prior to extractions (T0), 1 month (T1), 4 months (T2), and 12 months (T3) after implant insertion and superimposed with a computer software allowing to quantitatively analyse the three-dimensional changes occurred in the adjacent tissues. Variables related to thickness and volume were computed. RESULTS: Participants with BT ≤ 1 mm exhibited a significantly increased buccal peri-implant tissue thickness change than patients with BT > 1 mm (P = 0.049). At T3 patients representing BT ≤ 1 mm exhibited a total volume change of -8.53% ± 5.47% compared with patients presenting BT > 1 mm, -4.37% ± 2.08%. No statistical significance was found on the distance between implant shoulder and the buccal bone plate (BID) effect. CONCLUSION: After the first year of treatment peri-implant tissues showed continuous changes resulting in a higher thickness and volume reduction at thin buccal bone plates.

SAC Assessment Tool in Implant Dentistry: Evaluation of the Agreement Level Between Users.

PURPOSE: The SAC Assessment Tool is a clinical decision support system based on the foundations of the SAC Classification System in Implant Dentistry developed by the International Team for Implantology in 2009. It objectively classifies a patient's rehabilitation with dental implants as straightforward, advanced, or complex, from both a surgical and restorative perspective. The aim of this research was to test the agreement between observers with different qualification levels and clinical experience when using this clinical decision support system as a method that mitigates risk. MATERIALS AND METHODS: A total of 30 patients were randomly selected from clinical records, and diagnostic casts, intraoral and extraoral images, and panoramic radiographs were obtained. All data were analyzed with and without the SAC Assessment Tool by a dentist with advanced training and clinical experience in implant dentistry (control dentist) and compared with three colleagues (dentists 1, 2, and 3) with fewer qualifications and less clinical experience. All data were analyzed using statistical agreement tests (Fless kappa), interclass correlation, and agreement rate. The level of significance (α) was set at .05. RESULTS: All patients included in this research presented 104 edentulous areas, which were subjected to surgical evaluation for possible placement of dental implants. Concerning the degree of risk evaluation for dental implant treatment, the results of this study found that the agreement rate of the control dentist without SAC and control dentist with SAC was excellent (81.7%); the agreement rate of the control dentist and dentists 1, 2, and 3 with the use of SAC was satisfactory (67.3% to 76.0%); the variable that presented a lower agreement rate (34.6%) was the comparison between dentists 1, 2, and 3 without use of the SAC Assessment Tool. CONCLUSION: The SAC classification seems to be a useful tool to assist dentists with less experience in implant dentistry with defining the complexity of the treatment and hence with patient selection. It helps in the collection and homogenization of important clinical data to assess the risk of implant-based rehabilitations, thus contributing to an increase in the agreement rate.

Zirconia-ceramic versus metal-ceramic posterior multiunit tooth-supported fixed dental prostheses: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: The authors aimed to compare the survival and complication rates of zirconia-ceramic (ZC) versus metal-ceramic (MC) restorative material in multiunit tooth-supported posterior fixed dental prostheses (FDP). TYPES OF STUDIES REVIEWED: The authors conducted a systematic search of randomized controlled trials (RCTs), with no time or language restrictions, up to May 2019 using the MEDLINE (PubMed), Scopus, Web of Science, and Cochrane Central Register of Controlled Trials databases, followed by a manual search. RESULTS: The authors included 7 RCTs in the review and 5 RCTs in the meta-analysis. All studies had a low risk of bias. The authors included 330 participants (177 ZC and 173 MC tooth-supported FDP) in the meta-analysis, which revealed a medium-term survival rate of 95.4% (95% confidence interval [CI], 90.5% to 99.1%) for ZC FDP compared with 96.9% (95% CI, 94.3% to 99.4%) for MC FDP, with no significant differences (P = .364). The biological or technical complications did not show statistically significant differences, except in the global ceramic veneering chipping analysis (P = .023; risk difference [RD], 22.3%; 95% CI, 3.0% to 41.6%) and their subanalysis: minor chipping or chipping that can be solved with polishing (P = .044; RD, 19.5%; 95% CI, 0.5% to 38.4%), and major chipping or chipping that needs repair in the laboratory (P = .023; RD, 6.0%; 95% CI, 0.8% to 11.3%). CONCLUSIONS AND PRACTICAL IMPLICATIONS: Posterior multiunit ZC restorations are considered a predictable treatment in the medium term, although they are slightly more susceptible to chipping of the veneering ceramic than MC restorations.

Treatment Outcomes of Implant-Supported Maxillary Obturator Prostheses in Patients with Maxillary Defects: A Systematic Review.

PURPOSE: To systematically review the current evidence on clinical and patient-reported outcomes of implant-supported palatal obturator prostheses. MATERIALS AND METHODS: An electronic search of the PubMed, Web of Science, and Cochrane databases was carried out in June 2019. The titles and abstracts of all articles were screened by two independent reviewers. The references of the subsequently selected studies were further screened for potential articles. Assessment of the selected full texts was performed independently according to established inclusion and exclusion criteria. The quality of the selected studies was determined using the Newcastle-Ottawa scale. Interrater agreement on study selection was calculated using Cohen kappa statistic. RESULTS: The search yielded a total of 2,797 records. Ten studies were selected for data extraction, with a Cohen kappa value of 0.856. Five studies were prospective, and five were retrospective. The survival rates for conventional implants ranged from 21.42% to 100%, whereas for zygomatic implants, the survival rates varied from 30% to 100%. Four studies reported prosthodontic complications, with screw loosening being the most common. Patient quality of life (QoL) was analyzed in six studies. CONCLUSION: In spite of the limitations of the present review, it can be concluded that the clinical outcomes are acceptable in terms of survival rates, implant and prosthodontic complications, and QoL associated with implant-supported maxillary obturator prostheses. QoL of implant-supported prostheses in these patients are acceptable. The general study design was not homogenous between studies.

Improving PMMA resin using graphene oxide for a definitive prosthodontic rehabilitation - A clinical report.

The use of acrylic resins as a definitive material has shown some advantages comparing to other definitive materials. However, their poor mechanical properties remain a major drawback. In this case report, graphene oxide (GO) was incorporated into polymethyl methacrylate (PMMA) resin for a definitive maxillary rehabilitation, combined with an intraoral digital impression and a three-dimensional facial scan. After 8 months of the placement of the definitive prosthesis, no mechanical, aesthetic, or biologic complications were reported, and the soft tissues showed excellent health and stability. The incorporation of GO in PMMA resins seems to be a suitable option for prosthetic rehabilitation. However, further studies are needed to ensure rigorous scientific support of these techniques and materials. Key words:Computer-aided design, computer-aided manufacturing, dental impression technique, dental prosthesis; graphene oxide.

Dental Injuries in a Sample of Portuguese Militaries - A Preliminary Research.

Introduction: Traumatic dental and maxillofacial injuries are very common and appear to affect approximately 20-30% of permanent dentition, with often serious psychological, economic, functional, and esthetic consequences. Militaries are a highest risk group for orofacial trauma, not only because they are constantly engaged in physical activity (which increase the risk of traumatic injuries) but also because they are exposed to many risk factors. The aim of this study was to evaluate the prevalence of orofacial injuries, militaries knowledge about first-aid procedures following a dental avulsion and the use of mouthguards in a sample of Portuguese militaries. Materials and Methods: An observational cross-sectional study was conducted for forces of the Infantry Regiment n°14 of Viseu, Portugal. The study involved 122 members of the armed forces who were asked to complete a questionnaire, which enquired about: the occurrence of dental trauma, the use of mouthguards and militaries knowledge with regard to first-aid management of dental avulsions. Results: In our sample, 5.7% reported having experienced a dental trauma. This was further broken down to reveal that 2.5% had experienced an avulsion and 3.3% had a dental fracture. All respondents who reported having suffered dental trauma, reported that this was the only time that they had experienced dental trauma. Within this group, 71.4% visited a dentist, however only one (20%) visited the dentist during the same day that the trauma occurred. In addition, 21.3% mentioned that they had seen a dental trauma in at least one colleague during military trainings/operations. In the case of dental avulsion, the majority (54.9%) did not know how to act. The rate of mouthguard's use among militaries was very low (6.4%). The main reason reported for not using a mouthguard was thinking that it is not necessary (53.3%). Besides that, 31.1% did not know what a mouthguard was for. Conclusion: Prevention programs and promoting actions with this population are important reflections and should be adopted to reduce the incidence of orofacial trauma and to increase knowledge about this topic.

Clinical Performance of CAD/CAM Tooth-Supported Ceramic Restorations: A Systematic Review.

Owing to an increased demand for safe and esthetically pleasing dental materials, ceramics have been developed and optimized to rehabilitate anterior and posterior teeth. This evolution in ceramic materials is directly related to the development of sophisticated processing technologies and systems for use in dental medicine, particularly computer-aided design/computer-assisted manufacture (CAD/CAM) technology. This study is a systematic review outlining long-term clinical survival rates of single-tooth restorations fabricated with CAD/CAM technology with a minimum follow-up of 3 years. A bibliographic search up to September 2016 was performed using two databases: MEDLINE (PubMed) and Embase. Selected keywords and well-defined inclusion and exclusion criteria guided the search of relevant results. All articles were first reviewed by title, then by abstract, and subsequently by a full text reading. Data were assessed and extracted through a standardized form. The pooled results were statistically analyzed, and the overall failure rate was calculated by random effects model. Reported failures were analyzed by CAD/CAM system, type of restoration, restorative material, and luting agent. From a total of 2,916 single-tooth restorations with a mean exposure time of 7.0 years and 351 failures, the failure rate was 2.17% per year, estimated per 100 restoration years (95% confidence interval [CI]: 1.35% to 3.51%). The estimated total survival rate after 5 years was 89.7% (95% CI: 88.1% to 91.1%). The overall survival rate of single-tooth ceramic restorations fabricated with CAD/CAM technology was similar to those conventionally manufactured.

Oral health behaviors, dental injuries and mouthguard awareness among a sample of portuguese athletes: a cross sectional study / Comportamientos de salud bucal, lesiones dentales y conciencia del uso de protectores bucales entre una muestra de atletas portugueses: estudio transversal

Aim: To determine the oral health behaviors, the prevalence of dental injuries, the level of information about first-aid procedures in the case of dental avulsion and the mouthguard awareness in a sample of Portuguese athletes. Materials and Methods: Cross-sectional researchamong 1,048 athletes from the district of Viseu, Portugal. A self-administered questionnaire included demographic data and questions about: I) oral hygiene habits, II) occurrence of orofacial trauma, III) use of mouthguards and IV) athletes' knowledge regarding first-aid management in case of dental avulsion was given. The comparison between different variables was made by Chi-square test with level of significant set at p-value ≤0.05. Results: The mean age of the sample (76.24% male) was 18.14±8.17 years. Overall, the results demonstrated a low use of dental floss (25.48%) and a high number of athletes (21.94%) that had not visited a dentist in more than a year. The prevalence of dental trauma was 5.06% and the most common dental injuries experienced by athletes were crown fractures (60.38%). Nearly half of the participants (45.23%) reported not knowing how to act following a dental avulsion. The rate of mouthguard use was very low (9.73%). There was a significant relationship between the prevalence of dental injuries and the use of mouthguards (p=0.000; Cramér's V=0.145). Conclusion: The prevalence of dental trauma in our population was low. A low number of athletes use a mouthguard and there is a lack of knowledge concerning dental trauma issues. Prevention programs and promoting actions among this population are important and should be adopted.

Objetivo: Determinar los comportamientos de salud bucal, la prevalencia delesiones dentales, el nivel de información sobre los procedimientos de primeros auxilios en el caso de la avulsión dental y el conocimiento de los protectores bucales en una muestra de atletas portugueses. Materiales y métodos: estudio transversal de 1048 atletas del distrito de Viseu, Portugal. Se utilizó un cuestionario auto administrado que incluyó datos demográficos y preguntas sobre: I) hábitos de higiene bucal, II) ocurrencia de traumatismos orofaciales, III) uso de protectores bucales y IV) conocimiento de los atletas sobre el manejo de primeros auxilios en caso de avulsión dental. La comparación entre diferentes variables se realizó mediante la prueba de chi-cuadrado con el nivel de significancia establecido en p≤0.05. Resultados: La edad promedia de la muestra (76,24% hombres) fue de 18,14±8,17 años. En general, los resultados demostraron un bajo uso de hilo dental (25,48%) y un alto número de atletas (21,94%) que no habían visitado un dentista en más de un año. La prevalencia de trauma dental fue de 5,06% y las lesiones dentales más comunes que experimentaron los atletas fueron las fracturas de corona (60,38%). Casi la mitad de los participantes (45,23%) informaron que no sabían cómo actuar después de una avulsión dental. La tasa de uso de protectores bucales fue muy baja (9,73%). Hubo una relación significativa entre la prevalencia de lesiones dentales y el uso de protectores bucales (p=0,000; V de Cramer=0,145). Conclusión: la prevalencia de trauma dental en nuestra población fue baja. Un número bajo de atletas usa un protector bucal y hay una falta de conocimiento sobre temas de trauma dental. Programas de prevención y acciones de promoción entre esta población son importantes y deben ser adoptados.

Bilateral mandibular distraction osteogenesis in the neonate with pierre robin sequence and airway obstruction: a primary option.

Children with craniofacial abnormalities associated with retromicrognathia and glossoptosis often have compromised upper airway flow. In severe cases, emergency intubation is necessary immediately after birth, and tracheostomy is advocated to manage the airway in the neonatal period and to allow for feeding. Early intervention with bilateral mandibular osteogenesis avoids the need for tracheostomy, along with its complications, and it targets the primary etiologic factor of the problem-the anomalous anatomy of the mandible. We report two neonates with severe Pierre Robin sequence managed with bilateral mandibular distraction osteogenesis on day 9 and day 11 of life. The surgical techniques and distraction and consolidation periods were similar apart from the distraction devices used. The procedures were successful with early extubation (day 5 and day 7), oral feeding tolerance (day 11 and day 13) and hospital discharge (day 19 and day 18). Total mandibular distraction was 19 mm and 23.45 mm, respectively. No major complications were reported. Medium to long-term results were good. Bilateral mandibular distraction osteogenesis in the neonate is a safe and accurate procedure and is the primary option in cases of selected severe Pierre Robin sequence.