Electrochemical aptasensor for ultrasensitive detection of lipopolysaccharide using silver nanoparticles decorated titanium dioxide nanotube/functionalized reduced graphene oxide as a new redox nanoprobe.

A novel and relatively simple signal-off electrochemical aptasensor was constructed for highly sensitive detection of lipopolysaccharide (LPS). For the first time, silver nanoparticles (AgNPs) decorated titanium dioxide nanotube (TNT) was conjugated with polydiallyldimethylammonium chloride (PDDA) functionalized reduced graphene oxide (rGO) to form a new nanohybrid of Ag-TNT/P-rGO. This nanohybrid with a large specific surface area exhibited excellent electrochemical activity, which not only served as the sensing platform to immobilize LPS binding aptamer (LBA) but was also employed as the redox probe to monitor the change of the electrochemical signal. The electrochemical signal responses were measured by cyclic voltammetry (CV) in the potential range -0.3 to 0.5 V at a scan rate of 0.1 V/s. The proposed aptasensor exhibited acceptable stability, reproducibility, and specificity for LPS detection with a wide linear range from 17 fg/mL to 100 ng/mL. The limit of detection (LOD) was 5 fg/mL. Furthermore, the prepared aptasensor showed acceptable recovery ranging from 96% to 103%, and the RSD varied between 1.4% and 8.5% for determining LPS in real samples.Graphical abstract.

Sequential delivery of VEGF, FGF-2 and PDGF from the polymeric system enhance HUVECs angiogenesis in vitro and CAM angiogenesis.

Angiogenesis is an organized series of events, beginning with vessel destabilization, followed by endothelial cell re-organization, and ending with vessel maturation. The formation of a mature vascular network requires precise spatial and temporal regulation of a large number of angiogenic factors, including vascular endothelial growth factor (VEGF), basic fibroblast growth factor-2 (FGF-2) and platelet-derived growth factor (PDGF). VEGF aids in vascular permeability and endothelial cell recruitment, FGF-2 activates endothelial cell proliferation and migration while PDGF stimulates vascular stability. Accordingly, VEGF may inhibit vessel stabilization while PDGF may inhibit endothelial cell recruitment. Therefore, a new polymeric system was prepared by the supercritical carbon dioxide foaming technology, which realized sequential delivery of two or more growth factors with the controlled dose and rate. Increased release of VEGF (71.10%) and FGF-2 (69.76%) compared to PDGF (43.17%) was observed for the first 7 days. Thereafter, up till 21 days, an increased rate of release of BMP-2 compared to VEGF 165 was observed. The effects of PDGF-PLAms/VEGF-FGF-2-PLGA scaffolds on angiogenesis were investigated by human umbilical vein endothelial cells (HUVECs) angiogenic differentiation in vitro and chorioallantoic membrane (CAM) angiogenesis in vivo. Sequential delivery of VEGF, FGF-2 and PDGF from structural polymer scaffolds with distinct kinetics resulted in significant angiogenic differentiation of HUVECs and rapid formation of mature vascular networks in chorioallantoic membrane. This study reported a composite scaffold with distinct release kinetics, and these results clearly indicated the importance of sequential delivery of multiple growth factors in tissue regeneration and engineering.

Voltammetric aptasensor for sulfadimethoxine using a nanohybrid composed of multifunctional fullerene, reduced graphene oxide and Pt@Au nanoparticles, and based on direct electron transfer to the active site of glucose oxidase.

This work describes a voltammetric and ultrasensitive aptasensor for sulfadimethoxine (SDM). It is based on signal amplification by making use of a multifunctional fullerene-doped reduced graphene oxide nanohybrid. The nanohybrid was coated with poly(diallyldimethylammonium chloride) to obtain a material (P-C60-rGO) with large specific surface area and a unique adsorption ability for loading it with glucose oxidase (GOx). The coating also facilitates the direct electron transfer between the active site of GOx and the glassy carbon electrode (GCE). The P-C60-rGO were then modified with Pt@Au nanoparticles, and the thiolated SDM-binding aptamer was immobilized on the nanoparticles. On exposure of the modified GCE to a solution containing SDM, it binds to the aptamer. The results were recorded through the signal responses generated from the redox center of GOx (FAD/FADH2) by cyclic voltammetry at a scan rate of 100 mV·s-1 from -0.25 to -0.65 V. Accordingly, The sensor has good specificity and stability, and response is linear in the 10 fg·mL-1 to 50 ng·mL-1 SDM concentration range with a detection limit of 8.7 fg·mL-1. Graphical abstract Schematic presentation of an electrochemical aptasensor for sulfadimethoxine (SDM) using multifunctional fullerene-doped graphene (C60-rGO) nanohybrids for amplification. The limit of detection for SDM is as low as 8.7 fg·mL-1.

A supersandwich electrochemiluminescence immunosensor based on mimic-intramolecular interaction for sensitive detection of proteins.

An electrochemiluminescence (ECL) immunoassay protocol was developed based on mimic-intramolecular interaction for sensitive detection of prostate specific antigen (PSA). It was constructed by integrating the ECL luminophore (tris(4,4'-dicarboxylicacid-2,2'-bipyridyl)-ruthenium(ii)dichloride (Ru(dcbpy)3(2+))) and coreactant (histidine) into the supersandwich DNA structure. This strategy was more effective in amplifying the ECL signal by shortening the electronic transmission distance, improving the ECL luminous stability and enhancing the ECL luminous efficiency. The ECL matrices denoted as MWCNTs@PDA-AuNPs were fabricated through spontaneous oxidative polymerization of dopamine (DA) on multiwalled carbon nanotubes (MWCNTs) and reducing HAuCl4 to produce gold nanoparticles (AuNPs) by DA simultaneously. Then, the prepared matrices were applied to bind capture antibodies. Moreover, supersandwich Ab2 bioconjugate was designed using a PAMAM dendrimer to immobilize the detection antibody and supersandwich DNA structure. The PAMAM dendrimer, with a plurality of secondary and tertiary amine groups, not only facilitated high-density immobilization of the detection antibody and supersandwich DNA structure, but also greatly amplified the ECL signal of Ru(dcbpy)3(2+). The supersandwich DNA structure contained multiple Ru(dcbpy)3(2+) and histidine, further amplifying the ECL signal. The proposed supersandwich immunosensor showed high sensitivity with a detection limit of 4.2 fg mL(-1) and a wide linear range of 0.01 pg mL(-1)-40.00 ng mL(-1). With the excellent stability, satisfying precision and reproducibility, the proposed immunosensor indicates promising practicability for clinical diagnosis.

A sandwich-type electrochemical aptasensor for Mycobacterium tuberculosis MPT64 antigen detection using C60NPs decorated N-CNTs/GO nanocomposite coupled with conductive PEI-functionalized metal-organic framework.

The present work described a novel sandwich-type electrochemical aptasensor for rapid and sensitive determination of Mycobacterium tuberculosis MPT64 antigen. Herein, a novel carbon nanocomposite composed of fullerene nanoparticles, nitrogen-doped carbon nanotubes and graphene oxide (C60NPs-N-CNTs/GO) was facilely synthesized for the first time, which not only possessed a large specific surface area and excellent conductivity, but also exhibited outstanding inherent electroactive property, and therefore served as nanocarrier and redox nanoprobe simultaneously. Gold nanoparticles (AuNPs) was then uniformly anchored onto the surface of such nanocomposite via Au-N bonds to bind with MPT64 antigen aptamer Ⅱ (MAA Ⅱ), forming the tracer label to realize generation and amplification of electrochemical signal. Additionally, conductive polyethyleneimine (PEI)-functionalized Fe-based metal-organic framework (P-MOF) was used as a sensing platform to absorb bimetallic core-shell Au-Pt nanoparticles (Au@Pt), which could accelerate electron transfer and increase the immobilization of MPT64 antigen aptamer Ⅰ (MAA Ⅰ). After the typical sandwich-type protein-aptamer recognition, the inherent electroactivity of the tracer label was provoked by tetraoctylammonium bromide (TOAB), leading to a well-defined current response. Under the optimum condition, the proposed aptasensor showed a wide linear range for MPT64 detection from 1 fg/mL to 1 ng/mL with a limit of detection (LOD) as low as 0.33 fg/mL. More importantly, it was successfully used for MPT64 antigen detection in human serum, exhibiting a promising prospect for TB diagnosis in clinical practice.

Direct electrochemistry and electrocatalysis of a glucose oxidase-functionalized bioconjugate as a trace label for ultrasensitive detection of thrombin.

For the first time, a glucose oxidase-functionalized bioconjugate was prepared and served as a new trace label through its direct electrochemistry and electrocatalysis in a sandwich-type electrochemical aptasensor for ultrasensitive detection of thrombin.

A multi-amplification aptasensor for highly sensitive detection of thrombin based on high-quality hollow CoPt nanoparticles decorated graphene.

In this work, we have successfully demonstrated a facile strategy to incorporate high-quality hollow CoPt bimetal alloy nanoparticles (HCoPt) onto reduced graphene oxide sheet (HCoPt-RGs). An advanced sandwich-type electrochemical aptasensor for thrombin was proposed by using the HCoPt-RGs conjugates as secondary label. The formed conjugates provided large surface area for loading plentiful redox probe thionine (Thi), horseradish peroxidase (HRP) and secondary aptamer (Apt II) with good stability and friendly biocompatibility, indicating their superior properties in electroactive mediator enrichment and biomolecule immobilization. Furthermore, activated by glutaraldehyde (GA), the chitosan-hollow CoPt alloy nanoparticle (CS-HCoPt) film can greatly facilitate the capture of primary aptamer (Apt I) and dramatically reduce the nonspecific binding. Excellent sensitivity was obtained by detecting the conspicuously enhanced electrochemical signal of Thi, which was amplified by HCoPt alloy nanoparticles and HRP toward the catalytic reduction of H(2)O(2). The aptasensor displayed excellent performance for thrombin with a wide linearity in the range from 1.0×10(-12) to 5.0×10(-8) M and a relatively low detection limit of 3.4×10(-13) M. Moreover, the resulted aptasensor also exhibited good specificity, acceptable reproducibility and stability, indicating that the present strategy could pave a promising way for the wide application of graphene in clinical research.

Platinum-gold alloy nanoparticles and horseradish peroxidase functionalized nanocomposite as a trace label for ultrasensitive electrochemical detection of thrombin.

A novel tracer, platinum-gold alloy nanoparticles (Pt-AuNPs) and horseradish peroxidase (HRP) functionalized single-walled carbon nanotubes (SWCNTs) composite, is employed to label the secondary thrombin aptamer for constructing an ultrasensitive electrochemical aptasensor. Thionine, immobilized on functionalized SWCNTs, provides a pair of distinguished redox peak for electrochemical detection. Both the high-content Pt-AuNPs and HRP on SWCNTs amplify the electrochemical signal of thionine through electrocatalytic reduction of H(2)O(2). Differential pulse voltammetry (DPV) is employed to detect thrombin with different concentrations. The reduction peak current is logarithmically related to the concentration of thrombin in an extremely wide range from 10 fM to 5 nM with a detection limit of 3.6 fM. The dual signal amplification of Pt-AuNPs and HRP functionalized nanocomposite provides a promising way for ultrasensitive assay in electrochemical aptasensors.

A signal-on electrochemical probe-label-free aptasensor using gold-platinum alloy and stearic acid as enhancers.

In the present study, a new electrochemical probe-label-free aptasensor for thrombin (TB) based on the amplification of gold-platinum alloy nanoparticles (Au-PtNPs) and stearic acid was reported. Nafion@multiwalled carbon nanotubes (MWCNTs) coated electrode was firstly modified with electrochemical probe of methylene blue (MB). Then, Au-PtNPs were electrodeposited onto the electrode surface for the immobilization of aptamer and further hybridization of stearic acid labeled thrombin aptamer (TBA). In the presence of TB, the TBA bound with TB and released from the self-assembled duplex on the electrode into solution, decreasing the steric hindrance of the aptasensor and facilitating catalytic efficiency of Au-PtNPs in the presence of MB toward H2O2 with an enhanced electrochemical signal. With the enhanced effect of Au-PtNPs/MB modified electrode and stearic acid, a detection limit as low as 3pM for TB was achieved. The aptasensor also exhibited good selectivity and reproducibility.