Marginal and internal fit of five-unit zirconia-based fixed dental prostheses fabricated with digital scans and conventional impressions: A comparative in vitro study.

PURPOSE: This study aimed to compare the marginal and internal fit of five-unit zirconia-based fixed dental prostheses (FDPs) fabricated using digital scans and conventional impressions. MATERIALS AND METHODS: Nine master models with three zirconia abutments were scanned with an intraoral scanner (test group), and nine conventional impressions (control group) of these same models were also made. The stone casts from these impressions were scanned with a laboratory extraoral scanner (D700, 3Shape, Copenhagen, Denmark). A total of 18 five-unit zirconia-based FDP frameworks (test group, n = 9; control group, n = 9) were manufactured. Marginal and internal fit (in µm) were evaluated using the replica method under micro-computed tomography. Analysis of variance (one-way ANOVA) and Kruskal-Wallis tests were used to compare continuous variables across two groups. A level of p < 0.05 was accepted as statistically significant. RESULTS: The mean ± standard deviation of the marginal fit was 95.03 ± 12.74 µm in the test group and 106.02 ± 14.51 µm in the control group. The lowest marginal mean value was observed in the test group, with a statistically significant difference compared to the control group (F = 14.56, p < 0.05). The mean ± standard deviation of the internal fit was 103.61 ± 9.32 and 106.38 ± 7.64 µm, respectively, in the test and control groups, with no statistically significant difference (F = 1.56, p > 0.05). The mean values of both groups were clinically acceptable. CONCLUSIONS: The five-unit zirconia-based FDPs fabricated with digital scans showed better fit than those in the conventional impression group. Within the limitations of this study, these results are encouraging, and continued progress in the digital field should allow for more accurate long-span restorations.

Comparative assessment of complete-coverage, fixed tooth-supported prostheses fabricated from digital scans or conventional impressions: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Intraoral scanners have significantly improved over the last decade. Nevertheless, data comparing intraoral digital scans with conventional impressions are sparse. PURPOSE: The purpose of this systematic review and meta-analysis was to determine the impact of impression technique (digital scans versus conventional impressions) on the clinical time, patient comfort, and marginal fit of tooth-supported prostheses. MATERIAL AND METHODS: The authors conducted a literature search based on the Population, Intervention, Comparison, and Outcome (PICO) framework in 3 databases to identify clinical trials with no language or date restrictions. The mean clinical time, patient comfort, and marginal fit values of each study were independently extracted by 2 review authors and categorized according to the scanning or impression method. The authors assessed the study-level risk of bias. RESULTS: A total of 16 clinical studies met the inclusion criteria. The mean clinical time was statistically similar for digital scan procedures (784 ±252 seconds) and for conventional impression methods (1125 ±159 seconds) (P>.05). The digital scan techniques were more comfortable for patients than conventional impressions; the mean visual analog scale score was 67.8 ±21.7 for digital scans and 39.6 ±9.3 for conventional impressions (P<.05). The mean marginal fit was 80.9 ±31.9 µm and 92.1 ±35.4 µm for digital scan and conventional impressions, respectively, with no statistically significant difference (P>.05). CONCLUSIONS: Digital scan techniques are comparable with conventional impressions in terms of clinical time and marginal fit but are more comfortable for patients than conventional impression techniques.

Impact of haptic simulators in preclinical dental education: A systematic review.

BACKGROUND: Haptic technologies have opened a new avenue in preclinical dental education, with evidence that they can be used to improve student performance. The aim of this systematic review was to (1) determine the effect of haptic simulators on motor skill acquisition during preclinical dental training, (2) explore students' perception, and (3) explore the ability of haptic systems to distinguish users based on their initial level of manual dexterity. METHODS: A comprehensive search of articles published up to February 2023 was performed using five databases (i.e., PubMed/Medline, ScienceDirect, Web of Sciences, Scopus, and Cochrane Library) and specialized journals. The Preferred Reporting Items for Systematic Review and Meta-Analysis 2020 guidelines were followed, and the risk of bias was assessed. Only studies on the application of haptic simulators in dentistry preclinical training were included. Qualitative synthesis of data was performed, and the protocol was registered in PROSPERO (ID = CRD42022337177). RESULTS: Twenty-three clinical studies, including 1303 participants, were included. The authors observed a statistically significant improvement in dental students' motor skills in various dental specialties, such as restorative dentistry, pediatric, prosthodontics, periodontics, implantology, and dental surgery, after haptic training. Haptic technologies were perceived well by all participants, with encouraging data regarding their ability to differentiate users according to their initial level of manual dexterity. CONCLUSIONS: Our work suggests that haptic simulators can significantly improve motor skill acquisition in preclinical dental training. This new digital technology, which was well perceived by the participants, also showed encouraging results in discriminating users according to their level of experience.

The Effectiveness of the Addition of Platelet-Rich Fibrin to Bovine Xenografts in Sinus and Bone Ridge Augmentation: A Systematic Review.

Dental implants sometimes need bone augmentation to recreate an adequate bone height and volume. Numerous bone augmentation techniques have been described, and, currently, the most commonly used bone graft procedure is xenografts with deproteinized bovine bone mineral (DBBM). The addition of platelet-rich fibrin (PRF) to DBBM has already shown better performance than DBBM alone in restoring intrabony periodontal defects, but the role of PRF in preimplantation bone grafts is still not clear. The objective of this systematic review was to evaluate the efficacy of the adjunction of PRF or L-PRF to DBBM in bone ridge augmentation procedures. Clinical randomized controlled studies using PRF associated with DBBM were included. In April 2023, three electronic databases (PubMed, Cochrane, and Web of Science) were searched. The search strategy was performed according to PRISMA guidelines. The risk of bias assessments were performed using the Cochrane Collaboration tool. A total of seven articles were included and analyzed. The results show no statistically significant effect of PRF added to DBBM compared to DBBM alone in the sinus lift procedure but do show an effect in the reduction in bone graft resorption in one study of mandibular guided bone regeneration.

Different Polymers for the Base of Removable Dentures? Part I: A Narrative Review of Mechanical and Physical Properties.

Even before considering their introduction into the mouth, the choice of materials for the optimization of the prosthesis depends on specific parameters such as their biocompatibility, solidity, resistance, and longevity. In the first part of this two-part review, we approach the various mechanical characteristics that affect this choice, which are closely related to the manufacturing process. Among the materials currently available, it is mainly polymers that are suitable for this use in this field. Historically, the most widely used polymer has been polymethyl methacrylate (PMMA), but more recently, polyamides (nylon) and polyether ether ketone (PEEK) have provided interesting advantages. The incorporation of certain molecules into these polymers will lead to modifications aimed at improving the mechanical properties of the prosthetic bases. In the second part of the review, the safety aspects of prostheses in the oral ecosystem (fragility of the undercuts of soft/hard tissues, neutral pH of saliva, and stability of the microbiota) are addressed. The microbial colonization of the prosthesis, in relation to the composition of the material used and its surface conditions (roughness, hydrophilicity), is of primary importance. Whatever the material and manufacturing process chosen, the coating or finishes dependent on the surface condition remain essential (polishing, non-stick coating) for limiting microbial colonization. The objective of this narrative review is to compile an inventory of the mechanical and physical properties as well as the clinical conditions likely to guide the choice between polymers for the base of removable prostheses.

The Effectiveness of Calcium Phosphates in the Treatment of Dentinal Hypersensitivity: A Systematic Review.

Dentin hypersensitivity (DH) pain is a persistent clinical problem, which is a common condition known to affect patients' quality of life (QoL), but no treatment has ever been agreed upon. Calcium phosphates, available in different forms, have properties that allow sealing the dentinal tubules, which may relieve dentin hypersensitivity. The aim of this systematic review is to evaluate the ability of different formulations of calcium phosphate to reduce dentin hypersensitivity pain level in clinical studies. The inclusion criterion was as follows: clinical randomized controlled studies using calcium phosphates in treating dentin hypersensitivity. In December 2022, three electronic databases (Pubmed, Cochrane and Embase) were searched. The search strategy was performed according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The bias assessment risks results were carried out using the Cochrane Collaboration tool. A total of 20 articles were included and analyzed in this systematic review. The results show that calcium phosphates have properties that reduce DH-associated pain. Data compilation showed a statistically significant difference in DH pain level between T0 and 4 weeks. This VAS level reduction is estimated at about -2.5 compared to the initial level. The biomimetic and non-toxic characteristics of these materials make them a major asset in treating dentin hypersensitivity.

Different Polymers for the Base of Removable Dentures? Part II: A Narrative Review of the Dynamics of Microbial Plaque Formation on Dentures.

This review focuses on the current disparities and gaps in research on the characteristics of the oral ecosystem of denture wearers, making a unique contribution to the literature on this topic. We aimed to synthesize the literature on the state of current knowledge concerning the biological behavior of the different polymers used in prosthetics. Whichever polymer is used in the composition of the prosthetic base (poly methyl methacrylate acrylic (PMMA), polyamide (PA), or polyether ether ketone (PEEK)), the simple presence of a removable prosthesis in the oral cavity can disturb the balance of the oral microbiota. This phenomenon is aggravated by poor oral hygiene, resulting in an increased microbial load coupled with the reduced salivation that is associated with older patients. In 15-70% of patients, this imbalance leads to the appearance of inflammation under the prosthesis (denture stomatitis, DS). DS is dependent on the equilibrium-as well as on the reciprocal, fragile, and constantly dynamic conditions-between the host and the microbiome in the oral cavity. Several local and general parameters contribute to this balance. Locally, the formation of microbial plaque on dentures (DMP) depends on the phenomena of adhesion, aggregation, and accumulation of microorganisms. To limit DMP, apart from oral and lifestyle hygiene, the prosthesis must be polished and regularly immersed in a disinfectant bath. It can also be covered with an insulating coating. In the long term, relining and maintenance of the prosthesis must also be established to control microbial proliferation. On the other hand, several general conditions specific to the host (aging; heredity; allergies; diseases such as diabetes mellitus or cardiovascular, respiratory, or digestive diseases; and immunodeficiencies) can make the management of DS difficult. Thus, the second part of this review addresses the complexity of the management of DMP depending on the polymer used. The methodology followed in this review comprised the formulation of a search strategy, definition of the inclusion and exclusion criteria, and selection of studies for analysis. The PubMed database was searched independently for pertinent studies. A total of 213 titles were retrieved from the electronic databases, and after applying the exclusion criteria, we selected 84 articles on the possible microbial interactions between the prosthesis and the oral environment, with a particular emphasis on Candida albicans.

Current Data on Oral Peri-Implant and Periodontal Microbiota and Its Pathological Changes: A Systematic Review.

The 5- and 10-year implant success rates in dentistry are nearly 90%. Prevalence of peri-implant diseases is 10% for peri-implantitis and 50% for peri-implant mucositis. To better understand these inflammatory pathologies of infectious origin, it is important to know if the composition of the peri-implant microbiota is comparable with the periodontal microbiota in healthy and pathological conditions. New generation sequencing (NGS) is a recent metagenomic method that analyzes the overall microorganisms present in an ecological niche by exploiting their genome. These methods are of two types: 16S rRNA sequencing and the shotgun technique. For several years, they have been used to explore the oral, periodontal, and, more specifically, peri-implant microbiota. The aim of this systematic review is to analyze the recent results of these new explorations by comparing the periodontal and peri-implant microbiota in patients with healthy and diseased sites and to explore the microbiological characteristics of peri-implantitis. A better knowledge of the composition of the peri-implant microbiota would enable us to optimize our therapeutic strategies. An electronic systematic search was performed using the medical databases PubMed/Medline, Cochrane Library, and ScienceDirect, and Periodontology 2000. The selected articles were published between January 2015 and March 2021. Inclusion criteria included clinical studies comparing healthy and pathological periodontal and peri-implant microbiota exclusively using 16S rRNA sequencing or shotgun sequencing, with enrolled populations free of systemic pathology, and studies without substantial bias. Eight articles were selected and reviewed. All of them used 16S rRNA sequencing exclusively. The assessment of these articles demonstrates the specific character of the peri-implant microbiota in comparison with the periodontal microbiota in healthy and pathological conditions. Indeed, peri-implant diseases are defined by dysbiotic bacterial communities that vary from one individual to another, including known periodontopathogens such as Porphyromonas gingivalis (P.g.) and genera less mentioned in the periodontal disease pattern such as Filifactor alocis. Examination of peri-implant microbiota with 16S rRNA sequencing reveals differences between the periodontal and peri-implant microbiota under healthy and pathological conditions in terms of diversity and composition. The pattern of dysbiotic drift is preserved in periodontal and peri-implant diseases, but when comparing the different types of pathological sites, the peri-implant microbiota has a specificity in the presence of bacteria proper to peri-implantitis and different relative proportions of the microorganisms present.

Implant-supported removable partial dentures compared to conventional dentures: A systematic review and meta-analysis of quality of life, patient satisfaction, and biomechanical complications.

OBJECTIVES: The purpose of this systematic review and meta-analysis was to compare implant-supported removable partial dentures (ISRPDs) with distal extension removable partial dentures (DERPDs) in terms of patient-reported outcome measures (PROMs: patients' quality of life and satisfaction) and to determine mechanical and biological complications associated with ISRPDs. MATERIAL AND METHODS: An electronic search was performed on four databases to identify studies treating Kennedy class I or II edentulous patients and which compared ISRPDs with DERPDs in terms of PROMS and studies, which evaluated mechanical and biological complications associated ISRPDs. Two authors independently extracted data on quality of life, patient satisfaction, and biomechanical complications from these studies. The risk of bias was assessed for each study, and for PROMs, the authors performed a meta-analysis by using a random-effects model. RESULTS: Thirteen articles were included based on the selection criteria. The difference in mean scores for quality of life (30.5 ± 1.8; 95% confidence interval [CI], 24.9-36.1) and patient satisfaction (-20.8 ± 0.2; 95% CI, -23.7 to -17.8) between treatments with conventional and implant-supported removable dentures was statistically significant (p < .05). Implant-supported removable dentures improved patients' overall quality of life and satisfaction. Some mechanical and biological complications, such as clasp adjustment, abutment or implant loosening, marginal bone resorption, and peri-implant mucositis, were noted in ISRPDs during patient follow-up. Studies assessing PROMs were very heterogeneous (I2 = 65%, p = .85; I2 = 75%, p = .88). CONCLUSIONS: ISRPDs significantly improved quality of life and patient satisfaction. Some mechanical and biological complications have been associated with ISRPDs treatment, requiring regular monitoring of patients to avoid the occurrence of these complications.

Host's Immunity and Candida Species Associated with Denture Stomatitis: A Narrative Review.

Denture-related Candida stomatitis, which has been described clinically in the literature, is either localized or generalized inflammation of the oral mucosa in connection with a removable prosthesis. During this inflammatory process, the mycobacterial biofilm and the host's immune response play an essential role. Among microorganisms of this mixed biofilm, the Candida species proliferates easily and changes from a commensal to an opportunistic pathogen. In this situation, the relationship between the Candida spp. and the host is influenced by the presence of the denture and conditioned both by the immune response and the oral microbiota. Specifically, this fungus is able to hijack the innate immune system of its host to cause infection. Additionally, older edentulous wearers of dentures may experience an imbalanced and decreased oral microbiome diversity. Under these conditions, the immune deficiency of these aging patients often promotes the spread of commensals and pathogens. The present narrative review aimed to analyze the innate and adaptive immune responses of patients with denture stomatitis and more particularly the involvement of Candida albicans sp. associated with this pathology.

Effect of 970 nm low-level laser therapy on orthodontic tooth movement during Class II intermaxillary elastics treatment: a RCT.

This prospective randomized clinical trial aimed to evaluate the effect of low-level laser therapy on tooth movement during Class II intermaxillary elastics treatment. Forty-two patients with Class II malocclusion were included, and their maxillary quadrants were allocated into two groups: treatment with an active diode laser and a placebo group. In each group, the time taken to obtain Class I occlusion after 6 months, rate of movement, total displacement of the maxillary canine to Class I occlusion and pain were recorded. The time to reach Class I occlusion in the active laser group (2.46 ± 2.1 months) was not significantly different from that in the placebo group (2.48 ± 2.0 months) (p = 0.938). Interestingly, the total distance of movement on the active laser side (2.27 ± 1.5 mm) was significantly greater than that on the placebo side (1.64 ± 1.3 mm) (p = 0.009). The pain levels on days 1, 2 and 3 were not significantly different between the laser and placebo sections. The rate of distance change toward Class I occlusion in the laser group (1.1 ± 0.7 mm/month) was significantly higher than that in the placebo group (0.74 ± 0.6 mm/month) (p = 0.037). Low-level laser therapy (970 nm) did not reduce the time needed to obtain Class I occlusion, but a significant acceleration in tooth movement was observed in the irradiated group.Trial registration: NCT02181439. Registered 04 July 2014- https://www.clinicaltrials.gov/ct2/results?term=cinelaser .

Another Look at the Contribution of Oral Microbiota to the Pathogenesis of Rheumatoid Arthritis: A Narrative Review.

Although autoimmunity contributes to rheumatoid arthritis (RA), several lines of evidence challenge the dogma that it is mainly an autoimmune disorder. As RA-associated human leukocyte antigens shape microbiomes and increase the risk of dysbiosis in mucosae, RA might rather be induced by epigenetic changes in long-lived synovial presenting cells, stressed by excessive translocations into joints of bacteria from the poorly cultivable gut, lung, or oral microbiota (in the same way as more pathogenic bacteria can lead to "reactive arthritis"). This narrative review (i) lists evidence supporting this scenario, including the identification of DNA from oral and gut microbiota in the RA synovium (but in also healthy synovia), and the possibility of translocation through blood, from mucosae to joints, of microbiota, either directly from the oral cavity or from the gut, following an increase of gut permeability worsened by migration within the gut of oral bacteria such as Porphyromonas gingivalis; (ii) suggests other methodologies for future works other than cross-sectional studies of periodontal microbiota in cohorts of patients with RA versus controls, namely, longitudinal studies of oral, gut, blood, and synovial microbiota combined with transcriptomic analyses of immune cells in individual patients at risk of RA, and in overt RA, before, during, and following flares of RA.