Floating microplastic pollution in the vicinity of a marine protected area and semi-enclosed bay of Peru.

A baseline survey for floating microplastics (MPs) in the vicinity of a marine protected area and semi-enclosed bay of northern Peru was carried out. An average concentration of 0.22 MPs/L was estimated, primarily dominated by blue polyethylene terephthalate fibers. The distribution of floating MPs suggests that they tend to accumulate within the semi-enclosed Sechura Bay regardless of the sampling season. This behavior may be explained by local surface currents in the bay, which flow inwards and exhibit vorticities that could entrap MPs. Future studies are suggested to investigate the trajectory and fate of floating MPs within semi-enclosed areas. On the other hand, the impact of floating MPs on the trophic chain of coastal marine protected areas requires further research.

Exploring marine biofouling on anthropogenic litter in the Atlantic coastline of Morocco.

Today, the world is increasingly concerned about marine litter and its interaction with marine biodiversity. However, knowledge concerning the fouling organisms associated with marine litter is very limited in many of the world's marine environments. In this survey, we investigated biofouling on different types of marine litter washed up on all the coasts of the central Atlantic of Morocco. The findings revealed 21 fouling species belonging to 9 phyla (Arthropoda, Mollusca, Echinodermata, Annelida, Bryozoa, Porifera, Chlorophyta, Ochrophyta, and Ascomycota). More specifically, frequently observed fouling species include Mytilus galloprovincialis, Balanus laevis, Megabalanus coccopoma, and Pollicipes pollicipes species. Large marine litter items recorded the highest colonization of marine organisms in comparison to small ones. The frequency of occurrence (FO) of the species most commonly fouled on all coasts was Perforatus perforatus (FO = 48.60), followed by Mytilus galloprovincialis (FO = 45.80), Balanus trigonus (FO = 32.05), Balanus laevis (FO = 30.25), Megabalanus coccopoma (FO = 25.25), Bryozoa species (FO = 19.40), Spirobranchus triqueter (FO = 18.18), Lepas pectinata (FO = 14.45), and Pollicipes pollicipes (FO = 13.05). The majority of the species registered in this study are sessile. Substrate coverage by fouling taxa was significantly different between plastic substrate and other types of marine litter. Likewise, this study revealed that the proportion of fouling organisms is higher on rough surfaces. Overall, this research could be crucial to understanding the little-known subject of marine litter and its colonization by marine biota. Given that these marine litters can act as vectors and cause ecological, biogeographical, and conservation issues in the marine environment, minimizing the quantity of anthropogenic litter reaching the Moroccan Atlantic could significantly reduce its accumulation on the sea surface and seabed, thereby reducing the risk of invasion by non-indigenous species.

Plastic pollution on Moroccan beaches: Toward baselines for large-scale assessment.

In Africa, Morocco is the 10th largest producer of plastic. The severity of this plastic has attracted increasing amounts of attention in the Moroccan Atlantic and Mediterranean in recent years. However, at the national level, there is limited knowledge of plastic pollution. To obtain an exhaustive and comprehensive evaluation of plastic pollution levels in Morocco, large-scale monitoring is needed on all the coasts of the country. In this context, this paper examined the composition, abundance, distribution, source and quality of beaches on two Moroccan coasts using four beach quality indices along 29 beaches. During two seasons, a total of 72,105 items were counted. The mean litter abundance was 0.31 items/m2, and the Mediterranean beaches were more dense than the Atlantic beaches. In particular, litter density was greater in spring (0.35 items/m2) than in summer (0.29 items/m2). The data indicate considerable differences in the density of marine debris according to the seasonality, beach typology and presence of rivers. Hazardous litter items were collected along both Moroccan coasts, constituting 8.41 % of the total collected items, with a mean of 0.026 items/m2. The use of environmental indices allowed us to classify Moroccan beaches as "moderate cleanliness", "moderate abundance" of plastics, "moderately safe" presence of hazardous litter and "mediocre" environmental status. The findings of the present study indicate that the sources of litter on both Moroccan coasts come mainly from recreational activities and dumping. The waste management practices recommended for Moroccan beaches include reducing sources, mitigating mitigation measures and changing littering behavior.

Sludge drying and dewatering processes influence the abundance and characteristics of microplastics in wastewater treatment plants.

Wastewater treatment plants (WWTPs) have been identified as high-load receptors of microplastics (MPs) from different sources. However, the influence of specific treatment stanges requires further research. The main objective of this research was to evaluate the abundance and chemical characteristics of MPs in the sludge of two major wastewater treatment plants in the Agadir metropolis (Central Atlantic of Morocco). The Aourir plant receives urban influents and the inputs of the M'zar facility were urban and industrial. Samples were collected from the sludge matrices after primary settling, clarifying, dewatering, and drying systems. In addition, the effect of seasonality on MP load was assessed. The results showed that a higher abundance was noticed in raw sludge than in dewatered one in Aourir WWTP, while in M'zar WWTP, a very low decrease is noticed in dried sludge compared to raw sludge. The concentration of MPs in the summer season was significantly higher compared to other seasons for Aourir WWTP, while the winter season was higher for M'zar WWTP. Moreover, the most abundant shapes were fibers and the fraction 100-500 µm was the most preponderant. Eleven polymers were identified by ATR-FTIR, being polyester, polyethylene, polypropylene, and polystyrene the most abundant ones. Scanning Electron Microscopy coupled with Energy Dispersive X-ray revealed the visible degradation and fragmentation of MPs from sewage sludge and their ability to adsorb inorganic elements. It was estimated that between 2.2 × 107 and 7.4 × 108 MPs were evacuated with the sludge per day. The obtained findings confirmed that WWTP sludge acts as a vector of MPs with a high level of hazard to various matrices, such as landfills, agricultural soils, and groundwater. Overall, consideration must be given to the regulatory system managing the fate of sewage sludge to mitigate the collateral effects and provide solutions.

The halophyte Cakile maritima Scop. 1772 as a trap of plastic litter on the Moroccan coast.

Some plant communities of coastal dunes may affect the magnitude and distribution of litter on the ecosystem. In this study, the aim is to assess the aptitude of the halophyte Cakile maritima Scop. 1772 to be a trap and sink of plastic litter on the Moroccan Atlantic coast. Overall, a significant difference was noted between plastic litter trapped in C. maritima patches (1173 items) and control plots (502 items). Food containers and ropes were the most common trapped items. Shoreline and recreational activities, followed by dumping and ocean/waterway activities are the main sources of the trapped plastic items. The findings suggest the expansion of the cleaning operations to include coastal dunes, the need to change behavior among beachgoers in regard to food plastics disposal, as well the control of C. maritima distribution in the study area, and similar plant species in other regions.

Occurrence, characteristics, and removal of microplastics in wastewater treatment plants located on the Moroccan Atlantic: The case of Agadir metropolis.

Wastewater treatment plants (WWTPs) are some of the main sources of microplastics (MPs) in the environment. However, studies on the occurrence and removal efficiency of MPs in WWTPs are still scarce, especially in African countries. Thus, the aim of this work was to study the abundance of MPs in the influent and effluent of two WWTPs (Aourir and M'zar) from the Agadir metropolis (Moroccan Atlantic). The two WWTPs receive different wastewater inputs (domestic and industrial). In addition, the impacts of seasonality on the fate and removal efficiency were investigated. The results showed that the MPs abundance in the wastewater decreased from 188 MPs/L in the influent to 50 MPs/L in the effluent for Aourir WWTP (domestic inputs); while the abundance was greater in the M'zar WWTP (urban and industrial inputs) recording a mean value of 519 MPs/L and 86 MPs/L in the influent and effluent, respectively. MPs collected in the Aourir WWTP ranged from 290 to 3200 µm, while MPs from the M'zar WWTP, ranged from 330 to 4200 µm. Overall, the size range of 100-500 µm was the most abundant for both WWTPs. Fibers were the highest MPs morphotype found, followed by fragments. MP colors were mainly red, black, blue, and transparent for both treatment plants. Additionally, FTIR spectroscopy showed the presence of eight different polymers, mainly polyethylene (PE), polypropylene (PP), and polystyrene (PS). Seasonal variation analysis showed that MPs abundance in summer was significantly higher compared to other seasons. However, the comparison of the removal efficiency (RE) between the different seasons indicated that the winter season (74 %) recorded the highest RE for Aourir WWTP. Conversely, spring (87 %) recorded the highest RE for M'zar WWTP. SEM/EDX micrographs showed different degrees of weathering and chemical elements adhering to the surface of the MPs. The findings of the current study will serve as a baseline for future considerations about management strategies, wastewater reuse, as well as the understanding of the occurrence of microplastic pollution along the marine ecosystems of Morocco.

Binational survey using Mytilus galloprovincialis as a bioindicator of microplastic pollution: Insights into chemical analysis and potential risk on humans.

Microplastic (MP) contamination in edible mussels has raised concerns due to their potential risk to human health. Aiming to provide valuable insights regarding the occurrence, physicochemical characteristics, and human health implications of MP contamination, in the present study, two nationwide surveys of MP contamination in mussels (Mytilus galloprovincialis) were conducted in Morocco and Tunisia. The results indicated that MP frequency ranged from 79 % to 100 % in all the analyzed samples. The highest MP density was detected in mussels from Morocco (gills "GI": 1.88 MPs/g ww-1; digestive glands "DG": 0.92 MPs/g ww-1) compared to mussels of Tunisia (GI: 1.47 MPs g- 1; DG: 0.79 MPs g- 1). No significant differences in MP density were found between the two organs (GI and DG) for both countries. MPs were predominantly blue and black fibers, and smaller than 1000 µm. Seven polymeric types were identified, of which PET, PP, and PE were the most abundant, accounting for >87 % of all samples. Scanning Electron Microscopy (SEM) coupled with Energy dispersive X-ray (EDX) showed that most MPs have noticeable signs of weathering and inorganic components on their surface. The highest MP daily intake was found in children, while the lowest was estimated in women and men. Moreover, the annual dietary exposure of MPs through mussel consumption was estimated to be 1262.17 MPs/year in Morocco and 78.18 MPs/year in Tunisia. The potential risk assessment of MPs in mussels based on the polymer hazard index (PHI) was estimated in the high-risk levels, implying that MPs may pose health risks to humans. Overall, this research suggests that the consumption of mussels represents a considerable MP exposure route for the Moroccan and Tunisian populations.

Micro- and mesoplastic pollution along the coast of Peru.

Peru suffers from poor solid waste and coastal management, as well as evidenced plastic pollution in various forms. However, studies in Peru focusing on small plastic debris (i.e., meso- and microplastics) are still limited and inconclusive. Thus, the present study investigated the abundance, characteristics, seasonality, and distribution of small plastic debris along the coast of Peru. The abundance of small plastic debris is predominantly driven by specific locations, where a source of contamination is present, rather than presenting seasonal patterns. Meso- and microplastics were strongly correlated in both seasons (summer and winter), suggesting meso-plastic constantly breaking down as microplastic sources. Additionally, heavy metals (e.g., Cu, Pb) were found in low concentrations (mean concentrations < 0.4%) on the surface of some mesoplastics. Here, we provided a baseline on the multiple factors involving small plastic debris on the Peruvian coast and preliminarily identify associated contaminants.

Rajids ovipositing on marine litter: A potential threat to their survival.

Marine litter is a complex environmental issue threatening the well-being of multiple organisms. In the present study, we present an overlooked pathway by which marine litter interaction with certain ovigerous skates (Family: Rajidae) communities could compromise their survival. We propose that skates from the genus Sympterygia deposit their egg capsules on marine litter substrates by accident, which are then washed ashore still unhatched. We conducted 10 monitoring surveys on three beaches of La Libertad Region, on the north coast of Peru, looking for marine litter conglomerates to determine the presence of egg capsules. We registered a total of 75 marine litter conglomerates, containing 1595 egg capsules, out of which only 15.9 % were presumably hatched, and 15.8 % were still fresh. Fishing materials were identified as the main item in marine litter conglomerates. We conclude that this behavior could contribute to the decline of Sympterygia communities, although further research is needed.

Microplastics pollution in sediments of Moroccan urban beaches: The Taghazout coast as a case study.

This work describes the spatiotemporal analysis of microplastics (MPs) pollution in sediments collected on a high urbanized beach located in Taghazout coast, central Atlantic part of Morocco. The study area is mainly composed of moderately well-sorted fine sands with an average density of MPs that ranged between 915 MPs/kg in 2018 and 1448 MPs/kg in 2019. The most polluted sites were in the south part of Taghazout coast, close to facilities of where beachgoers are often found. Microplastic Pollution Index (MPPI), Microplastic Impact Coefficient (CMPI), Agglomerative Hierarchical Clustering (AHC), and Multidimensional Scaling (MDS) revealed spatiotemporal variation of MPs pollution. Thus, the principal component analysis (PCA) showed a low correlation between the sediment characteristics (i.e., grain size, sorting, skewness) and MPs densities. Overall, the outputs of this baseline recommend implementing plastic management strategies to eliminate or at least minimize the collateral effects generated by MPs pollution in sediments of urbanized beaches.

The wedge clam Donax trunculus L., 1758 as a bioindicator of microplastic pollution.

This study describes the use of D. trunculus as a bioindicator of microplastic (MPs) pollution due to beach urbanization related to the development of the Taghazout Bay tourist resort in Morocco. In six sites located on the coast, MPs densities ranged from 1.75 to 5.93 items per gram of D. trunculus wet weight. MPs contamination was significantly influenced spatiotemporally by the urbanization degree in the area. The shapes found were fibers (90.5%) and fragments (9.5%). The Fourier Transform Infrared Spectroscopy (FTIR) analysis reported two polymers: polyethylene (65%) and polypropylene (35%). MPs colors were dark and light, with a predominance of light blue (23.8%). The species ingested different sizes of MPs, mainly the 0.1 and 0.5 mm fractions. Scanning Electron Microscope coupled with an energy dispersive X-ray analyzer (SEM/EDX) revealed weathered MPs with chemical elements adhered to their surface (Cu, Fe, Mg, S, Cl, etc.). The results of this study recommend the use of D. trunculus as a new bioindicator of MPs pollution following an urban change in the coastal scenery. Also, a sustainable coastal management must be implemented in the study area.

Floating microplastics pollution in the Central Atlantic Ocean of Morocco: Insights into the occurrence, characterization, and fate.

This work presents preliminary results about abundance, distribution, characteristics, sources, and fate of microplastics (MPs) in the Central Atlantic Ocean (CAO) of Morocco. The investigation was conducted into three subsections, each characterized by different types of human activities and covering rural, village, and urban areas. MPs were detected in 100 % of the sampling sites. The abundances varied from 0.048 to 3.305 items/m3, with a mean abundance of 0.987 ± 1.081 items/m3. MPs abundance was higher in surface seawater linked to urban areas compared to village and rural areas. The dominant polymer type was polyester (PET-53.8 %) followed by polypropylene (PP-24.36 %), polyamide (PA-7.56 %), polystyrene (PS-6.88 %), polyvinyl chloride (PVC-2.64 %), ethylene vinyl acetate (EVA-2.60 %), polyetherurethane (PUR-1.36 %), and acrylic (AC-0.8 %). Fibers were the most dominant shapes accounting for over 50 %. MPs were mainly smaller than 2 mm in size (71 %) and characterized by colorful aspects. These findings suggested that wastewater treatment plant (WWTP) effluents and anthropogenic activities (industry, tourism, sanitation, and fishing) are the major pollution sources of MPs in the study area. SEM/EDX micrographs showed different weathering degrees and chemical elements adhered to the MPs surface.

Face masks invading protected areas: Risks and recommendations.

Among the indirect environmental impacts generated by the global COVID-19 pandemic, contamination with personal protective equipment (PPE), like face masks, may be one of the most relevant ones. PPE has been found in multiple aquatic, marine, and terrestrial environments, including places of absolute relevancy to biodiversity conservation, such as protected areas (PAs). Here, a brief report of the presence of PPE in six PAs of Peru is presented. PPE pollution in PAs consisted mainly of single-use and reusable face masks, as well as plastics associated with PAs, such as KN95 respirator wrappings. The mean PPE density was estimated as 1.32 × 10-3 PPE/m2. FTIR spectroscopy confirmed that face masks and wrappers mainly consisted of polypropylene and polyethylene, two of the most commonly available synthetic polymers. The material was poorly degraded according to their FTIR spectra, possibly suggesting that they were discarded recently. The recent ban on single-use plastic in Peruvian PAs is regarded as a great step forward toward the efforts made to preserve these invaluable places. However, these measures seemed insufficient to prevent PPE and other types of litter from contaminating areas of ecological importance. Considering the current scenario, several recommendations were proposed to be implemented in PAs in order to prevent PPE from becoming a new plastic issue to tackle. These recommendations are expected to also serve for future events where the use of single-use plastics becomes inevitable, like global pandemics.

Microplastics pollution along the central Atlantic coastline of Morocco.

This baseline study describes the microplastic (MPs) problem on seven beaches located on Agadir, central Atlantic coast of Morocco. Microplastics abundances (densities) ranged from 7680 MPs/kg to 34,200 MPs/kg above other world beaches. The following shapes were found: fibers, fragments, films, and pellets. Fibers were the dominant typology with a 73%. Polyethylene (PE) was the predominant polymer in all beaches with an average percentage of 59%, followed by Polypropylene (PP - 18%), Polystyrene (PS - 9%), Polyvinyl chloride (PVC - 8%), and Ethylene-vinyl acetate (EVA - 6%). Microplastics abundances presented in this work suggest continuous inputs of plastics of all sizes and types. Also, all observed shapes highlight a combination of sources (primary and secondary). Central Atlantic Moroccan beaches are currently affected by extreme values of MPs that demand urgent interventions to restore environmental quality.

Are we underestimating floating microplastic pollution? A quantitative analysis of two sampling methodologies.

Microplastics (MPs) are widespread in the water column of several aquatic ecosystems. Thus, the sampling methodology is considered as a basic factor influencing MPs abundance. In this baseline, a total of 67 investigations were chosen to conduct a quantitative analysis between two sampling methods: Trawl and bulk. The aim is to report a general overview of the MPs abundance and characteristic differences based on the sampling procedures and provide methodological recommendations. MPs abundance reported by bulk studies is 3500 higher than trawl studies. Furthermore, the morphological types and polymers abundances were statistically affected by the type of sampling tool. Conversely, MPs size ranges were significantly different between sampling procedures, suggesting that trawling underestimates the smaller MPs fractions. The analysis confirms that the sampling methods should be selected based on the research objectives. In this sense, it is recommended to combine both types of sampling procedures to obtain comprehensive data.

Binational survey of personal protective equipment (PPE) pollution driven by the COVID-19 pandemic in coastal environments: Abundance, distribution, and analytical characterization.

In the present contribution, two nationwide surveys of personal protective equipment (PPE) pollution were conducted in Peru and Argentina aiming to provide valuable information regarding the abundance and distribution of PPE in coastal sites. Additionally, PPE items were recovered from the environment and analyzed by Fourier transformed infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), and X-ray diffraction (XRD), and compared to brand-new PPE in order to investigate the chemical and structural degradation of PPE in the environment. PPE density (PPE m-2) found in both countries were comparable to previous studies. FTIR analysis revealed multiple polymer types comprising common PPE, mainly polypropylene, polyamide, polyethylene terephthalate, and polyester. SEM micrographs showed clear weathering signs, such as cracks, cavities, and rough surfaces in face masks and gloves. EDX elemental mapping revealed the presence of elemental additives, such as Ca in gloves and face masks and AgNPs as an antimicrobial agent. Other metals found on the surface of PPE were Mo, P, Ti, and Zn. XRD patterns displayed a notorious decrease in the crystallinity of polypropylene face masks, which could alter its interaction with external contaminants and stability. The next steps in this line of research were discussed.