Performance of chemically resistant polyurea reverse osmosis membrane in the treatment of highly alkaline industrial wastewater containing sodium aluminate.

The goal of the present study is to treat industrial wastewater containing sodium aluminate using a chemically inert polyurea (PU) based thin film composite (TFC) reverse osmosis (RO) membrane to promote water reclamation and zero liquid discharge (ZLD). Pretreatment was carried out to reduce the pH of the effluent from 12.5 to 7.1. The TFC RO membrane was fabricated by coating PU on Polyethersulfone (PES) substrate by interfacial polymerization (IP). The surface and cross-sectional morphologies of the membrane were characterized using scanning electron microscopy (SEM). The indigenously synthesized membrane was effective in the removal of total dissolved solids (TDS), chemical oxygen demand (COD), colour and electrical conductivity. The experiments were conducted by varying the feed composition of the wastewater. The maximum water recovery and flux were found to be 74% and 73.9 L/m2·h. RO process using PU membrane exhibited significant potential for cost effective, safe and pollution-free treatment of sodium aluminate industrial effluent.

Laying Waste to Mercury: Inexpensive Sorbents Made from Sulfur and Recycled Cooking Oils.

Mercury pollution threatens the environment and human health across the globe. This neurotoxic substance is encountered in artisanal gold mining, coal combustion, oil and gas refining, waste incineration, chloralkali plant operation, metallurgy, and areas of agriculture in which mercury-rich fungicides are used. Thousands of tonnes of mercury are emitted annually through these activities. With the Minamata Convention on Mercury entering force this year, increasing regulation of mercury pollution is imminent. It is therefore critical to provide inexpensive and scalable mercury sorbents. The research herein addresses this need by introducing low-cost mercury sorbents made solely from sulfur and unsaturated cooking oils. A porous version of the polymer was prepared by simply synthesising the polymer in the presence of a sodium chloride porogen. The resulting material is a rubber that captures liquid mercury metal, mercury vapour, inorganic mercury bound to organic matter, and highly toxic alkylmercury compounds. Mercury removal from air, water and soil was demonstrated. Because sulfur is a by-product of petroleum refining and spent cooking oils from the food industry are suitable starting materials, these mercury-capturing polymers can be synthesised entirely from waste and supplied on multi-kilogram scales. This study is therefore an advance in waste valorisation and environmental chemistry.

Facile approach for the dispersion of regenerated cellulose in aqueous system in the form of nanoparticles.

This study reports a facile method to disperse cellulose in deionized water, wherein a critical condition of regenerated cellulose is discovered, where it completely disperses up to a maximum of 5 g L(-1) concentration in deionized water with the help of ultrasonication. The dispersed cellulose is characterized by TEM and DLS, the latter among which shows 200 nm hydrodynamic radii of cellulose nanoparticles dispersed in deionized water. FTIR analysis of dispersed cellulose reveals that dispersed cellulose losses its crystallinity during regeneration and dispersion step employed in this study. The dispersed cellulose reported in this study is able to form free-standing, transparent films, which were characterized by SEM, XRD, TGA, EDX, and FTIR spectroscopy and show resistance against dissolution in water. Additionally, the dispersed cellulose is able to undergo at least three times faster enzymatic hydrolysis in comparison to pristine microcrystalline cellulose under similar reaction conditions. The dispersed cellulose reported here could be a better material for reinforcement, preparation of hydrogels, and drug delivery applications under physiological environment.

Hydrophilized Ultrafiltration Membranes Synthesized from Acrylic Acid Grafted Polyethersulfone for Downstream Processing of Therapeutic Insulin and Cobalamin.

The present study focuses on synthesis of novel high-performance acrylic acid (AA) grafted polyethersulfone (PES) ultrafiltration (UF) membranes for purification of small therapeutic biomolecules such as urea, insulin, and cobalamin. The membranes were indigenously synthesized by adding polyethylene glycol (PEG) of 6 kDa M.Wt. as a pore former and subsequent grafting of AA using 2 to 6 wt.% concentrations under UV-induced photo grafting. Scanning electron microscopy reveals that the PEG additive profoundly influences the pore density on the membrane surface. FTIR spectra confirm the graft polymerization of AA with the PES substrate. Separation performance of the grafted membranes was evaluated to establish the trade-off between the degree of grafting and MWCO. From the experimental results, the pure water flux (PWF) of 6% grafted PES membrane was enhanced from 8.5 (PES [0] [6]) to 18.20 l m-2 h-1 (PES [6 +] [6]) in the presence of PEG pore former, respectively. The grafting concentration window of 2-6% resulted in selective membranes to altogether remove uremic toxins into the permeate with retention of high molecular size proteins. Hence, 5 and 6 wt.% AA grafted membranes exhibited > 90% rejection for insulin and cobalamin biomolecules along with 24.5 and 23.8 l m-2 h-1 bar-1 permeability towards urea, respectively. The process results correlate well with the MWCO values of membranes ranging from 1 to 10 kDa. This work provides the efficacy of these grafted membranes for potential application in the downstream processing of therapeutic biomolecules such as insulin and cobalamin.

Co3O4 needles on Au honeycomb as a non-invasive electrochemical biosensor for glucose in saliva.

While glucose monitoring technology is widely available, the continued prevalence of diabetes around the world coupled with its debilitating effects continues to grow. The significant limitations which exist in the current technology, instils the need for materials capable of non-invasive glucose detection. In this study a unique non-enzymatic electrochemical glucose sensor was developed, utilising a gold honeycomb-like framework upon which sharp Co3O4 needles are anchored. This composite nanomaterial demonstrates excellent sensing performance in glucose concentrations ranging between 20 µM and 4 mM, exceeding the range required for non-invasive glucose sensing. In conjunction with this high sensitivity (2.014 mA mM-1·cm-2), the material possesses excellent selectivity towards glucose for commonly interfering physiological species such as uric acid and ascorbic acid. Glucose detection in synthetic saliva was then performed showing excellent capability in the low concentration range (20 µM-1 mM) for non-invasive sensing performance. Further tests showed good selectivity of the sensor in physiological contaminants commonly found in saliva such as cortisol and dopamine. This development provides excellent scope to create next-generation non-invasive diabetes monitoring platforms, with excellent performance when detecting low glucose concentrations in complex solutions such as saliva.

Single step formation of biocompatible bimetallic alloy nanoparticles of gold and silver using isonicotinylhydrazide.

Manufacturing nanoparticles with controlled physicochemical properties using environment-friendly routes have potential to open new prospects for a variety of applications. Accordingly, several approaches have been established for manufacturing metal nanoparticles. Many of these approaches entail the use of hazardous chemicals and could be toxic to the environment, and cannot be used readily for biomedical applications. In the present work, we report a single step bio-friendly approach to formulate gold (Au), silver (Ag), and Au-Ag alloy nanoparticles with desired surface corona and composition using isonicotinylhydrazide (INH) as a reducing agent. INH also functioned as a stabilizing agent by enabling a surface corona around the nanoparticles. Remarkably, within a single step INH could also provide a handle in regulating the composition of Au and Ag in bimetallic systems without any additional chemical modification. The physicochemical and surface properties of the different nanoparticles thus obtained have been examined by analytical, spectroscopic and microscopic techniques. Cell cytotoxicity (release of lactate dehydrogenase), cell viability and intracellular reactive oxygen species (ROS) assays confirmed that the Au, Ag, and Au-Ag bimetallic nanoparticles prepared with INH are biocompatible. Finally, the presence of organic surface corona of INH on the nanoparticles was found to impart nanozyme activity and antimycobacterial sensitivity to the nanoparticles.

Optimization of glucose formation in karanja biomass hydrolysis using Taguchi robust method.

The main objective of the present study is aimed to optimize the process parameters for the production of glucose from karanja seed cake. The Taguchi robust design method with L9 orthogonal array was applied to optimize hydrolysis reaction conditions and maximize sugar yield. Effect of temperature, acid concentration, and acid to cake weight ratio were considered as the main influencing factors which effects the percentage of glucose and amount of glucose formed. The experimental results indicated that acid concentration and liquid to solid ratio had a principal effect on the amount of glucose formed when compared to that of temperature. The maximum glucose formed was 245 g/kg extractive free cake.

Performance assessment and hydrodynamic analysis of a submerged membrane bioreactor for treating dairy industrial effluent.

Submerged membrane bioreactor (SMBR) is a relatively advanced technology for waste water treatment that involves integrated aerobic and anaerobic biological processes with membrane filtration. In the present investigation, hydrophobic polyvinylidene fluoride (PVDF) and hydrophilic polyacrylonitrile (PAN) hollow fiber (HF) membranes were tested in an indigenously fabricated SMBR for dairy effluent treatment under aerobic conditions using mixed microbial consortia. Effect of operating parameters such as suction pressure, degree of aeration and trans-membrane pressure (TMP) on membrane performance in terms of flux, rejection of turbidity, BOD and COD besides fouling characteristics was investigated. The observed optimum permeabilities of PVDF and PAN HF membranes were approximately 108 and 115 LMH bar(-1) with high extent of impurity removal. The rejection of COD was found to be 93% for PVDF and 91% for PAN HF membranes whereas corresponding rejection of BOD was observed to be 92% and 86%. A two-dimensional comprehensive model was developed to predict the hydrodynamic profile inside the module. Regression analysis revealed that the simulation results agreed well with experimental data.