Pharmacological therapy in the management of temporomandibular disorders and orofacial pain: a systematic review and meta-analysis.

BACKGROUND: Temporomandibular disorders (TMD) are manifested by soreness in the jaw joint area and jaw muscles, clicks or creaks when opening or closing the mouth. All these symptoms can be disabling and occur during chewing and when the patient yawns or speaks. Several classes of drugs are used to treat symptoms. This review aims to assess which drug suits the different signs. METHODS: Pubmed, Web of Science and Lilacs were systematically searched until 01/02/2023. Clinical trials were selected that dealt with drugs used in temporomandibular dysfunction RESULTS: Out of 830 papers, eight studies were included. The Meta-Analysis with Continuous Outcomes with Pre-Calculated Effect Sizes resulted in the rejection that there is intergroup variability (p.0.74). CONCLUSIONS: Treatment of orofacial pain is still a significant challenge for dentistry. We can conclude that there is no drug of first choice in the treatment of temporomandibular pain. However, the clinician must distinguish the type of pain and the aetioloic cause of the pain so that the patient can be treated and managed pharmacologically.

Effectiveness of the platelet-rich fibrin in the control of pain associated with alveolar osteitis: a scoping review.

OBJECTIVES: The aim of this scoping review was to determine the effectiveness of the platelet-rich fibrin in the control of pain associated with alveolar osteitis. MATERIALS AND METHODS: Reporting was based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Extension for Scoping Reviews. A literature search was conducted in the PubMed and Scopus databases to identify all clinical studies on the application of platelet-rich fibrin in the control of pain caused by alveolar osteitis. Data were extracted independently by two reviewers and qualitatively described. RESULTS: The initial search returned 81 articles, with 49 identified after duplicates removal; of these, 8 were selected according to the inclusion criteria. Three of the eight studies were randomized controlled clinical trials, and four were non-randomized clinical studies, two of which were controlled. One study was case series. In all of these studies, pain control was evaluated using the visual analog scale. Overall, the use of platelet-rich fibrin resulted effective in the control of pain determined by alveolar osteitis. CONCLUSIONS: Within the limits of this scoping review, the application of platelet-rich fibrin in the post-extra-extraction alveolus reduced the pain associated with alveolar osteitis in almost all the included studies. Nevertheless, high-quality randomized trials with adequate sample size are warranted to draw firm conclusions. CLINICAL RELEVANCE: Pain associated with alveolar osteitis causes discomfort to the patient and is challenging to be treated. Use of platelet-rich fibrin could be a promising clinical strategy for pain control in alveolar osteitis if its effectiveness will be confirmed by further high-quality studies.

A 3-Dimensional Evaluation of Bone Density in Alveolar Cleft Grafting Methods: Bone Substitutes Versus Autologous Bone.

INTRODUCTION: Secondary alveolar cleft repair using autologous bone graft is currently the gold standard in treating residual alveolar clefts. Despite its effectiveness, this technique is still burdened by several withdrawals, mostly related to donor site morbidity. To decrease disadvantages for patients, numerous attempts in the literature regarding bone substitutes have been described. The aim of this study is to compare the viability of bovine-based replacement bone material with respect of autologous bone graft in alveolar cleft reconstruction, through 3-dimensional alveolar cleft segmentation and bone density evaluation from preoperative and postoperative cone-beam computed tomography. PATIENTS AND METHODS: A retrospective cohort study of 10 patients who underwent surgical procedure for alveolar cleft grafting at Sant'Orsola Malpighi University Hospital of Bologna from December 2012 to December 2016 was undertaken. Five patients received autologous bone graft and 5 a bovine bone substitute graft. Preoperative and immediate postoperative orthopanoramic x-rays were recorded. Cone-beam computed tomography scans have recorded both pre and postoperatively. Volumetric evaluation on 3-dimensional cone-beam computed tomography images was performed. RESULTS: Alveolar clefts repaired using substitute bovine bone/biological membrane scaffold had a mean fill of 69.00% of total cleft volume, while this figure was of 67.07% with autologous bone grafting. The immediate postoperative course and subsequent discharge were uneventful for both groups, with a difference in timing. The cost of substitute bovine bone was offset by cost savings associated with a reduction in operative and postoperative and hospitalization time. CONCLUSIONS: Bone substitutes showed to be a promising solution in alveolar cleft grafting.

Intraparotid Osteolipoma: Treatment Option and Surgical View.

ABSTRACT: Osteolipoma is a benign neoplasm originating from the mesenchymal fat tissue cells and characterized by the presence of bone formation. In the head and neck district osteolipoma has been described as parapharyngeal, nasopharinx, submandibular gland, eyelid, floor of the mouth, and skull base lesion. Only 1 case of osteolipoma was reported as a neoplasm of the parotid region. Considering the rarity of the osteolipoma, our purpose was to describe the first case of totally intraparotid gland localization of osteolipoma and summarize and review the actual literature concerning the presence of this tumor in the region of major salivary glands. A 56-years-old male patient was treated for intraparotid osteolipoma. Surgical removal of tumor was done with a standard preauricular/cervical incision and blunt dissection. The facial nerve was identified and preserved completely. In the reviewed series, all cases were reported in adult patients with a relative long history of slow progression. According to our paper and the review of the literature, we can assess that Osteolipoma is an extremely rare lesion affecting the major salivary glands, which should be considered along with common salivary gland tumors in the differential diagnosis.

The Application of the Divine Proportion for the Construction of the Visualized Treatment Objective in Craniofacial Surgery.

ABSTRACT: Aesthetics and function of maxillofacial district are closely related and could interfere with patient psychological conditions. The aim of this paper is to describe and to analyze the procedures necessary for a proper surgical visualized treatment objective (VTO) realization through the use of the tracing on lateral head film, applying the divine proportion (or golden ratio) in certain steps. The method described is easy to realize, cheap and help both orthodontist and maxillo-facial surgeon to communicate each other and to the patients.For the following article, digital research and handheld research on surgical VTO planning for patients with skeletal or dentoalveolar severe deformities managed by surgeons and orthodontics were used. The research included articles in English published on dental and maxillofacial surgery journals.The surgical VTO consists of a "previsualization" of the objectives in order to make the desired changes for the individual patient. The result can thus be visualized and pre-evaluated rather than just imagined by the mind's eye. To simplify the procedure, the surgical VTO has been divided into 11 steps. The accurate model of the surgical result is fundamental in the treatment of dentofacial deformities. These predictions are intended to guide the treatment towards the desired result, to give the patient a reasonable preview of the outcome, and to ensure communication between the orthodontist and the surgeon.This technique proves to be effective in planning surgical treatment and it allows the clinician to view changes before, during, and after orthognathic surgery. The skeletal, dental, and aesthetic complete cephalometric evaluation is the key point to the long-term success of the results.

Surgical Management of Primary Chronic Osteomyelitis of the Jaws: The Use of Computer-Aided-Design/Computer-Aided Manufacturing Technology for Segmental Mandibular Resection.

The term osteomyelitis of the jaws identifies different pathological patterns characterized by the involvement of the cortical bone and bone marrow in osteoarticular infections.At the head and neck level, the segment most affected by osteomyelitis is the mandible and in most of the cases the cause of the infection is bacterial, as a result of pulp or periodontal infections, post-extraction alveolitis, foreign bodies and fractures. The mandibular PCO often presents with an insidious onset, without a striking acute phase, and it is characterized by recurrent episodes of pain, swelling, lockjaw, latero-cervical lymphadenopathy, without signs of suppuration.Three patients have been collected and recorded for the study.The authors believe that in the more advanced cases of PCO in adult patients, in which the mandibular bone appears almost entirely sclerotic and deformed, and that are not responsive to pharmacological therapy or to conservative surgical therapies such as decortication, it is necessary to perform a complete removal of the portion affected by osteomyelitis, with lower alveolar nerve preservation and contextual reconstruction with free microvascular bone flap.Our review aims to describe the clinico-pathological features of a rare pathological entity, propose a surgical treatment algorithm using computer-aided-design/computer-aided manufacturing technology and review the existing literature.

Three-Dimensional Evaluation on Cortical Bone During Orthodontic Surgical Treatment.

Adult patients' severe malocclusions, especially the skeletal ones, cannot be exclusively solved by the orthodontic treatment and therefore a combined orthodontic-surgical treatment is necessary. Today, numerous software allows to plane and to visualize the final treatment results simulating the best therapeutic option. This is a retrospective experimental study that aims to analyze the changes in the buccal cortical bone in patients undergoing orthodontics surgeries and to evaluate the correlation between the dental movement and the changes in the relative bone cortex. The study sample consists of 32 subjects. By applying the CBCT radiographic examinations, the measurements were made in well-defined points of reference. The 3D study of the dental changes of position and the cortical buccal bone related variation, suggests how the determined orthodontic movement of the dental element does not achieve an easily predictable bone variation. Therefore, it also suggests that there is no direct proportionality relationship between the extent of bone apposition/reabsorption and dental movement.

Virtual Orthodontic Surgical Planning to Improve the Accuracy of the Surgery-First Approach: A Prospective Evaluation.

PURPOSE: We developed an innovative computer-assisted method to increase the accuracy of the surgery-first (SF) approach by linking the virtual orthodontic planning (VOP) with the virtual surgical planning (VSP). MATERIALS AND METHODS: Fifteen consecutive patients were enrolled from 2013 to 2015. All 15 patients had initially undergone cone-beam computed tomography (CBCT; 15 × 15 field-of-view) and intraoral digital scanning of the dental arches. The DICOM (Digital Imaging and Communications in Medicine) data set and STL files were processed using the SimPlant O&O platform (Dentsply-Sirona, York, PA), which facilitates skeletal, dental, and soft tissue modeling and subsequent realization of the VOP/VSP. The VSP was reproduced using computer-aided design and computer-aided manufacturing surgical splints, and the VOP was realized via postoperative orthodontic treatment. At the end of treatment, all the patients underwent repeat CBCT and digital scanning of the dental arches, and the new data sets were compared with the original data sets to determine the deviations. To evaluate skeletal accuracy, we assessed all points within an arbitrary range of -2 to +2 mm. To evaluate dental accuracy, the arbitrary range was -0.8 to +0.8 mm. RESULTS: The average duration of orthodontic treatment was 17.9 months. The accuracy of maxillary treatment averaged 0.0702 ± 2.0724 mm and that of mandibular treatment, 0.2811 ± 1.9993 mm. The average upper and lower dental arch accuracy was -0.0029 ± 1.125 and -0.0147 ± 1.263 mm, respectively. The maxillary surgery accuracy was 75.3% and that of mandibular surgery 74.0%, both within the -2 to +2-mm range. The upper and lower arch accuracy was 58.86 and 51.53%, respectively, both within the -0.8 to +0.8-mm range. CONCLUSIONS: The use of the VOP/VSP improved the diagnostic and therapeutic SF preoperative planning. VOP contributed significantly in this context. The accuracy of skeletal repositioning was acceptable; however, the VSP should be rendered more reproducibly in the future to minimize the need for orthodontic compensation and to maximize the advantages of SF.

Congenital Ulcerated Lip Hemangioma Treated With a Cleft Lip Technique.

A neonate presented to our clinic for evaluation of unusual congenital cleft lip. The clinical follow-up showed at first an ulceration of the lesion and then a stable result after propanolol systemic therapy. After 18 months of clinical follow-up, surgical treatment was performed, which consisted of double unilimb Z-plasty according to Mulliken's microform cleft lip repair. Knowing the existence of these strange vascular anomalies of the lip will allow us to improve the differential diagnosis and treatment plan.

Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning.

PURPOSE: The purpose of the present study was to develop a computer-aided design (CAD) and computer-aided manufacturing (CAM) technique that enabled fabrication of surgical cutting guides and titanium fixation plates that would allow the upper maxilla to be repositioned correctly without a surgical splint in orthognathic patients. MATERIALS AND METHODS: Ten patients were recruited. A complete CAD-CAM workflow for orthognathic surgery has 3 steps: 1) virtual planning of the surgical treatment, 2) CAD-CAM and 3-dimensional printing of customized surgical devices (surgical cutting guide and titanium fixation plates), and 3) computer-aided surgery. Upper maxilla repositioning was performed in a waferless manner using a CAD-CAM device: the surgical cutting guide was used during surgery to pilot the osteotomy line that had been planned preoperatively at the computer and the custom-made fixation titanium plates allowed desired repositioning of the maxilla. RESULTS: To evaluate the reproducibility of this CAD-CAM orthognathic surgical method, the virtually planned and actually achieved positions of the upper maxilla were compared. Overlap errors using a threshold value smaller than 2 mm were evaluated, and the frequency of such errors was used as a measurement of accuracy. By this definition, the accuracy was 100% in 7 patients (range in all patients, 62 to 100%; median, 92.7%). CONCLUSION: These results tend to confirm that the use of CAD-CAM cutting guides and customized titanium plates for upper maxilla repositioning represents a promising method for the accurate reproduction of preoperative virtual planning without the use of surgical splints.

Computer-assisted piezoelectric surgery: a navigated approach toward performance of craniomaxillofacial osteotomies.

PURPOSE: The purpose of the current study was to present the clinical applications of a new technique that we term computer-assisted piezoelectric surgery (CAPS). The method marries piezosurgery and navigation to greatly aid the treatment of various maxillofacial problems. METHODS: Preliminary applications in orthognathic surgery, craniofacial procedures, orthodontic surgery, and oncology were analyzed retrospectively. Eighteen patients were treated using the CAPS technique in the interval of 2010 to 2013. RESULTS: The technique emphasizing the features that are not possible without the combination of the 2 systems has been analyzed. The technique is safer than other methods, is minimally invasive, and allows the use of a buried or semiburied approach. CONCLUSIONS: According to our preliminary experience, CAPS seems to be a valuable new technique for craniomaxillofacial osteotomies.

Navigation in Orthognathic Surgery: 3D Accuracy.

This article aims to determine the absolute accuracy of maxillary repositioning during orthognathic surgery according to simulation-guided navigation, that is, the combination of navigation and three-dimensional (3D) virtual surgery. We retrospectively studied 15 patients treated for asymmetric dentofacial deformities at the Oral and Maxillofacial Surgery Unit of the S.Orsola-Malpighi University Hospital in Bologna, Italy, from January 2010 to January 2012. Patients were scanned with a cone-beam computed tomography before and after surgery. The virtual surgical simulation was realized with a dedicated software and loaded on a navigation system to improve intraoperative reproducibility of the preoperative planning. We analyzed the outcome following two protocols: (1) planning versus postoperative 3D surface analysis; (2) planning versus postoperative point-based analysis. For 3D surface comparison, the mean Hausdorff distance was measured, and median among cases was 0.99 mm. Median reproducibility < 1 mm was 61.88% and median reproducibility < 2 mm was 85.46%. For the point-based analysis, with sign, the median distance was 0.75 mm in the frontal axis, -0.05 mm in the caudal-cranial axis, -0.35 mm in the lateral axis. In absolute value, the median distance was 1.19 mm in the frontal axis, 0.59 mm in the caudal-cranial axis, and 1.02 mm in the lateral axis. We suggest that simulation-guided navigation makes accurate postoperative outcomes possible for maxillary repositioning in orthognathic surgery, if compared with the surgical computer-designed project realized with a dedicated software, particularly for the vertical dimension, which is the most challenging to manage.

Hierarchical self-assembly of PDMA-b-PS chains into granular nanoparticles: genesis and fate.

The hierarchical self-assembly of an amphiphilic block copolymer, poly(N,N-dimethylacrylamide)-block-polystyrene with a very short hydrophilic block (PDMA10 -b-PS62 ), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.

Sleep bruxism in children main methods of treatment: a systematic review with meta-analysis.

Sleep bruxism is both masticatory muscle activities characterized by repeated or prolonged tooth contact as well as bracing or thrusting of the jaw. This meta-analysis evaluates the differences between sexes and which therapy is most effective in treating bruxism. A literature search was performed on PubMed, Lilacs, Web of Science and Scopus, and articles published from 2000 to 2022 were considered according to the keywords entered. The term "Bruxism" has been combined with "Children" using the boolean connector AND. At the end of the research, 1462 studies were identified from the search conducted on the three engines. Only four were chosen to draw up the present systematic study. The Forrest plot found that photo biomodulation therapy has a higher efficacy (Odds Ratio (OR) 0.10; 95% Confidence Interval (CI) from 0.03 to 0.43), followed by treatment with hydroxyzine (OR 0.19; 95% CI from 0.03 to 1.04). The average between girls and boys with bruxism is 18.5 for boys and 19.5 for girls. This meta-analysis showed that treatment by photobiomodulation has more significant effects on bruxism, followed by treatment with hydroxyisalazine. However, this meta-analysis has limitations due to the diversity of treatment evaluation methods.

Advancements in guided surgical endodontics: A scoping review of case report and case series and research implications.

This scoping review examined current case series and reports on guided surgical endodontic applications in order to provide a critical platform for future research. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping reviews guidelines were followed. A search on PubMed and Scopus yielded 611 articles, with 17 case reports and 1 series meeting inclusion criteria. Overall, guided surgery addressed anatomical complexities, with 15 articles employing static protocols and 3 dynamic. Results showed minimal iatrogenic errors and reduced chair time, with no postoperative issues reported. Within the cases described, guided endodontic surgery exhibited satisfactory results in management of anatomical complex cases. Cost-effectiveness, the need for adequate follow-up, procedure's reproducibility and accuracy, and objective measurement of the reduction in operative times and iatrogenic errors are some of the limitations in the current reports that need to be considered for planning of future experimental and cohort studies.

The quality of life in orthognathic surgery: surgery first versus traditional orthognathic surgery evaluation.

BACKGROUND: This study aims to evaluate the differences in terms of Quality of life and the degree of satisfaction with the result obtained between the two groups of patients treated with the orthodontic first approach and surgery first approach, through administered questionnaires inserted in the post-operative phase. METHODS: A total of 40 patients who previously underwent orthognathic surgery were included in this study, 20 treated with the orthodontic first approach and 20 treated with the Surgery First Approach. The impact of orthognathic surgery on patients' quality of life was recorded through the administration of the OHIP-14 test, FACE-Q test scale and FACE-Q test. Comparison between the two groups was done using a nonparametric inferential statistical test, the Mann-Whitney U-test. RESULTS: The results showed no significant differences in terms of quality of life between the two groups. Patients treated with orthodontic first approach presented greater psychological distress and perceived their faces as unattractive. CONCLUSIONS: A worsening of the aesthetics of the face determined by the orthodontic approach before surgery, may not be decisive in the quality of life of patients, which will certainly be better after surgery. SFA and OFA determine in both cases a marked improvement in the patient's quality of life.

Pathological mandibular fracture complicated by osteonecrosis in an adult patient with pycnodysostosis: clinical report and review of the literature.

Pycnodysostosis is an ultra-rare osteosclerotic skeletal disorder characterized by short stature, susceptibly to fractures, acroosteolysis of the distal phalanges, and craniofacial features (frontal bossing, prominent nose, obtuse mandibular angle, micrognathia). Dental abnormalities (delayed eruption of teeth, hypodontia, malocclusion, dental crowding, persistence of deciduous teeth, enamel hypoplasia, and increased caries) are also frequent; due to bone metabolism alteration, the patients have an increased risk for jaw osteomyelitis, especially after tooth extraction or mandible fracture. Other complications are obstructive sleep apnea, endocrine alterations and cytopenia. Pycnodysostosis is caused by biallelic loss of function variants in CTSK gene, coding the lysosomal protease cathepsin K. CTSK is involved in the degradation of bone matrix proteins, such as type I and type II collagen. In pycnodysostosis, this degradation is decreased, leading to increased bone density and bone fragility with pathological fractures and poor healing. We present a clinical report of a female adult patient with typical pycnodysostosis phenotype. At the age of 52 years, she had a pathological spontaneous fracture of the right mandible complicated by osteonecrosis, treated with load bearing osteosynthesis. The direct sequencing of CTSK gene revealed the presence of the pathogenic homozygous variant c.746T>A, (p.Ile249Asn), that confirmed the diagnosis of pycnodysostosis. We also review the literature case series published to date, that suggest to always consider the diagnosis of pycnodysostosis in case of osteosclerosis, even in the absence of brachydactyly or short stature. This report details the natural history of the disease in this patient, from childhood to adulthood, and highlights the importance of a quality of life assessment. In addition, we describe a case of mandibular osteonecrosis and spontaneous fracture in pycnodysostosis, drawing attention on the maxillofacial complications in these patients and on the importance of a personalized follow-up.

The Impact of Standing Electric Scooters on Maxillofacial Fractures: An Italian Multi-Centric Epidemiological Study.

Objectives: This study aimed to determine the impact of standing electric scooters on maxillofacial on the Italian territory. Methods: The authors analyzed the epidemiology of the injuries to define electric mobility's impact on maxillofacial surgery practice. For this retrospective cohort study, data were collected by unifying the standing e-scooter-related fractures database from 10 Italian maxillofacial surgery departments. The reference period considered was from January 2020 to December 2023. The main data considered included age, gender, type of access, time slot of admission, type of admission, alcohol level, helmet use, dynamics of the accident, and area of the fracture. Results: A total of 79 patients were enrolled. The average age of the participants was approximately 31 years. The blood alcohol level was found to be above the Italian norm in 15 cases (19%). Only one patient wore a helmet. The most affected facial third was the middle one with 36 cases (45.5%), followed by the lower one (31, 39.3%). The most recurrent patterns were fractures of the orbito-malar-zygomatic complex (15, 19%), followed by multifocal (bifocal, trifocal) fractures of the mandible (14, 17.5%). Conclusions: This study demonstrated how maxillofacial fractures related to the use of electric scooters are associated with complex patterns, associated with a high rate of post-surgical aftermaths.

Assessment of fully digitalized workflow for implant-prosthetic rehabilitation in temporomandibular disorders patients: A clinical study.

Digitalized workflow eliminates the need for the tray, impression materials, its decontamination, packaging and shipping, pouring with plaster, cast fabrication, mounting in an articulator, reducing storage spaces, and the risks of any loss or fracture of the plaster model is overcome by archiving on the computer. This clinical investigation aimed to evaluate the effectiveness of the fully digitalized rehabilitation [implant-supported prosthesis] method in partially edentulous patients and with TMD, using advanced software. Twelve patients requiring implant-supported prosthesis in the mandibular molar area with Temporomandibular disorders [TMD] were selected. The fully digitalized rehabilitation method with advanced software was used for rehabilitation. For each subject, Optical impressions, CBCT scan, and Digital recording of jaw movement data. Guided implant surgery and digitalized prosthetic rehabilitation; were performed. The effectiveness of the digitalized workflow was assessed by evaluating the changes in the joint symptoms before and after the end of the treatment, changes in the electromyographic tracings, the precision of the prosthetic artefact, assessed through the amount of chair adjustment operating time and the number of retouching/ modifications to be carried out before the completion of the work. The results showed that the mean operative time required in 12 patients was 9.42 min, significantly less than the time recorded in previous studies when the medium mean was 16.00 min. The mean number of touch-ups [adjustments] was less than 3, most of which were on the interproximal surfaces. There were no significant changes recorded in the electromyography tracings. There were also no changes in joint symptoms. It was found that this way of working was entirely reliable and significantly reduced operating times and the number of appointments. Digital flow is beneficial ei dysfunctional patients, not about improvements in temporomandibular symptoms but in times of operability and prosthetic retouching.

Is Beauty a Matter of Volume Distribution? Proposal of a New Aesthetic Three-Dimensional Guide in Orthognathic Surgery.

BACKGROUND: Orthognathic surgery is a multidisciplinary surgery in which the aesthetic results have become increasingly important, and consequently, also the predictability of the surgical outcomes. In this paper, we analyzed the volumetric distribution of the lower two-thirds of the face, in patients operated by orthognathic surgery and selected for their attractiveness. Our goal was to analyze the aesthetic volumetric distribution for gender and to propose our operating philosophy, that a normative distribution of facial volumes could be used like a new 3D aesthetic guide in orthognathic planning. METHODS: A group of 46 orthognathic patients (26 females, 20 males) with the best postoperative aesthetic score was selected by a jury of plastic surgeons, orthodontists, and journalists. The mean soft tissue volumes of the malar, maxillary, mandibular, and chin regions were analyzed. RESULTS: Overall, we measured a mean female facial volume distribution of 38.7%, 29%, 27.6%, and 4.7%, respectively, in the malar, maxillary, mandibular, and chin regions, while in males, it was 37%, 26%, 30%, and 6%, respectively. CONCLUSIONS: In this paper, the expansion of facial volumes in orthognathic surgery is proposed as a key point for facial harmonization. Beauty could be scientifically interpreted as a balanced distribution of facial volumes, and the virtual study of this distribution can become an important part of the preoperative analysis, such as a "volumetric" 3D cephalometry, where the surgeon could use average values of aesthetic volumetric distribution as preoperative surgical references.