Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros

Base de dados
Ano de publicação
Tipo de documento
Assunto da revista
País de afiliação
Intervalo de ano de publicação
1.
Sci Total Environ ; 742: 140512, 2020 Nov 10.
Artigo em Inglês | MEDLINE | ID: mdl-32721719

RESUMO

The interaction of anaerobic microorganisms with carbon nanotube/polymer nanocomposites (CNT/PNC) will play a major role in determining their persistence and environmental fate at the end of consumer use when these nano-enabled materials enter landfills and encounter wastewater. Motivated by the need to understand how different parameters (i.e., polymer type, microbial phenotype, CNT characteristics) influence CNT/PNC biodegradation rates, we have used volumetric biogas measurements and kinetic modeling to study biodegradation as a function of polymer type and CNT properties. In one set of experiments, oxidized multiwall carbon nanotubes (O-MWCNTs) with a range of CNT loadings 0-5% w/w were incorporated into poly-ε-caprolactone (PCL) and polyhydroxyalkanoates (PHA) matrices and subjected to biodegradation by an anaerobic microbial community. For each CNT/PNC, complete polymer biodegradation was ultimately observed, although the rate of biodegradation was inhibited above certain critical CNT loadings dependent upon the polymer type. Higher loadings of pristine MWCNTs were needed to decrease the rate of polymer biodegradation compared to O-MWCNTs, an effect ascribed principally to differences in CNT dispersion within the polymer matrices. Above certain CNT loadings, a CNT mat of similar shape to the initial PNC was formed after polymer biodegradation, while below this threshold, CNT aggregates fragmented in the media. In situations where biodegradation was rapid, methanogen growth was disproportionately inhibited compared to the overall microbial community. Analysis of the results obtained from this study indicates that the inhibitory effect of CNTs on polymer biodegradation rate is greatest under conditions (i.e., polymer type, microbial phenotype, CNT dispersion) where biodegradation of the neat polymer is slowest. This new insight provides a means to predict the environmental fate, persistence, and transformations of CNT-enabled polymer materials.


Assuntos
Nanocompostos , Nanotubos de Carbono , Biodegradação Ambiental , Polímeros
2.
Bioresour Technol ; 269: 210-220, 2018 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-30173067

RESUMO

This study investigated enhancing methane production from algal-bacteria biomass by adjusting the C/N ratio through co-digestion with a nitrogen-poor co-substrate - cellulose. A biomethane potential test was used to determine cumulative biogas and methane production for pure and co-digested substrates. Four kinetic models were evaluated for their accuracy describing experimental data. These models were used to estimate the total energy output and net energy ratio (NER) for a scaled AD system. Increasing the algal C/N ratio from 5.7 to 20-30 (optimal algae:cellulose feedstock ratios of 35%:65% and 20%:80%) improved the ultimate methane yield by >10% and the first ten days production by >100%. The modified Gompertz kinetic model demonstrated highest accuracy, predicting that co-digestion improved methane production by reducing the time-lag by ∼50% and increasing rate by ∼35%. The synergistic effects increase the AD system energy efficiency and NER by 30-45%, suggesting potential for substantial enhancements from co-digestion at scale.


Assuntos
Biocombustíveis , Celulose/metabolismo , Águas Residuárias , Anaerobiose , Bactérias , Biomassa , Reatores Biológicos , Carbono/química , Metano , Nitrogênio/química
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA