MicroCT assessment of bone microarchitecture in implant sites reconstructed with autogenous and xenogenous grafts: a pilot study.

PURPOSE: To assess bone microarchitecture in maxillary sites grafted with autogenous or xenogenous grafts as well as to demonstrate the usefulness of microCT in dental implant research. MATERIALS AND METHODS: Samples (n = 12) consisting of titanium fixation screws covered by at least 0.5-1 mm of human bone were obtained from 17 sites grafted with autogenous or xenogenous materials and prepared for microCT scanning and conventional histology. Bone histomorphometric parameters were evaluated in three distinct regions (graft region, transitional region, and native bone region). Three-dimensional (3D) bone-to-implant contact (BIC) calculation was performed using microCT data. Histological sections were used to calculate two-dimensional (2D) BIC percentages, which were compared with values obtained from 2D microCT images. RESULTS: Histomorphometric parameters varied according to the type of graft used, but sites reconstructed with autogenous bone showed higher mean values in general. In autograft samples, indices for parameters such as Tb.Th and Tb.Sp were significantly different when the native bone region was compared to the graft region. While a higher mean 3D BIC was found in the native bone region for both graft materials, significant BIC differences were absent when graft types were compared. The 2D BIC percentages obtained from histological and microCT images were similar. CONCLUSIONS: Autografts outperformed the xenogenous material used in this study concerning the histomorphometric parameters assessed. While graft type did not seem to influence 3D BIC, the native bone region showed the highest BIC percentages when compared to the other regions in both graft groups. In addition, 2D BIC ratios were similar regardless of graft material or image source (histological sections x microCT slices). Taken together, our findings suggest that microCT is an effective tool for 2D and 3D histomorphometric and BIC assessments in dental implant research.

Diagnostic accuracy of phosphor plate systems and conventional radiography in the detection of simulated internal root resorption.

OBJECTIVE: To evaluate the performance of conventional radiography and photostimulable phosphor (PSP) plate in the detection of simulated internal root resorption (IRR) lesions in early stages. MATERIALS AND METHODS: Twenty single-rooted teeth were X-rayed before and after having a simulated IRR early lesion. Three imaging systems were used: Kodak InSight dental film and two PSPs digital systems, Digora Optime and VistaScan. The digital images were displayed on a 20.1″ LCD monitor using the native software of each system, and the conventional radiographs were evaluated on a masked light box. Two radiologists were asked to indicate the presence or absence of IRR and, after two weeks, all images were re-evaluated. Cohen's kappa coefficient was calculated to assess intra- and interobserver agreement. The three imaging systems were compared using the Kruskal-Wallis test. RESULTS: For interexaminer agreement, overall kappa values were 0.70, 0.65 and 0.70 for conventional film, Digora Optima and VistaScan, respectively. Both the conventional and digital radiography presented low sensitivity, specificity, accuracy, positive and negative predictive values with no significant difference between imaging systems (p = .0725). CONCLUSIONS: The performance of conventional and PSP was similar in the detection of simulated IRR lesions in early stages with low accuracy.

Ionizing radiation effects on the secretory-stage ameloblasts and enamel organic extracellular matrix.

This study assessed the effects of high doses of ionizing radiation on eruption rate, odontogenic region morphology, secretory-stage ameloblasts, and enamel organic extracellular matrix (EOECM) of rat maxillary incisors. For the study, 30 male rats were divided into three experimental groups: control (non-irradiated), irradiated by 15 Gy, and irradiated by 25 Gy. Irradiated groups received a single dose of 15 or 25 Gy of X-rays in the head and neck region. The maxillary incisor eruption rate was measured. Sections of 5-µm thickness of the maxillary incisor odontogenic regions were evaluated using bright field light microscopy. Ultrathin sections of secretory ameloblasts and their EOECM were analyzed by transmission electron microscopy (TEM). Irradiated groups showed significantly diminished eruption rate values at the 4th and at the 6th day after irradiation. Reduced optical retardation values were observed in the irradiated groups. The odontogenic region of maxillary incisors from irradiated rats exhibited altered and poorly organized preameloblasts. TEM showed degeneration areas in the secretory-stage EOECM and several autophagosomes in the secretory ameloblasts from irradiated animals. In conclusion, high radiation doses delay eruption and induce disturbances in secretory ameloblasts and EOECM of rat maxillary incisors. These findings may be associated with structural defects of mature enamel.

Risk assessment of inferior alveolar neurovascular bundle by multidetector computed tomography in extractions of third molars.

PURPOSE: This study aimed to assess the reliability of multidetector computed tomography (MDCT) in determining the surgical risk of the inferior alveolar neurovascular bundle in extractions of third molars. METHODS: The sample comprised thirty-three individuals (63 third molars) who underwent preoperative evaluation by MDCT before extraction of impacted mandibular third molars. MDCT was used to determine the relationship between the roots of the third molars and the mandibular canal, and the course of the mandibular canal. Inferior alveolar nerve (IAN) exposure and the presence of hemorrhage were analyzed after removal of the teeth. IAN neurosensory deficit was recorded after 7 days. Clinical and MDCT findings were compared using Fisher's exact test (P < 0.05). RESULTS: There was a statistically significant association between IAN exposure and the tomographic relationship between the roots of third molars and the mandibular canal (P = 0.015). Conventionally, all cases of IAN neurosensory deficit and hemorrhage occurred when the roots of the third molar presented in an at-risk relationship with the mandibular canal, however, this association was not statistically significant (P > 0.05). A statistically significant association was found between the lingual course of the mandibular canal and IAN exposure (P = 0.03). CONCLUSIONS: MDCT is an effective tool for determination of the surgical risk to the inferior alveolar neurovascular bundle in extraction of mandibular third molars.

Effect of radiotherapy on the hardness and surface roughness of two composite resins.

The knowledge about the potential adverse effects of radiotherapy compared to dental composites is a useful information for the clinician's decision regarding adoption of repairs or replacement of dental restorations during oral cancer treatment. This study evaluated the effects of irradiation on microhardness and surface roughness of a microfilled and a packable composite resin. The microfilled composite resin demonstrated significantly lower microhardness and a smoother surface compared to the packable composite resin (p < 0.05). Although irradiation significantly reduced the microhardness for both composite resins (P < 0.05), increasing the x-ray doses did not cause an additional significant decrease in surface hardness (P > 0.05). Meanwhile, irradiation did not produce a significantly rougher surface (P > 0.05), but specimens submitted to abrasion exhibited a significant increase in surface roughness for both composite resins (P < 0.05). It was concluded that while irradiation can adversely affect the hardness of tested composite resins, it does not interfere with surface roughness.

Bond strength of dental adhesive systems irradiated with ionizing radiation.

PURPOSE: The aim of the present paper was to determine the effect of different types of ionizing radiation on the bond strength of three different dentin adhesive systems. MATERIALS AND METHODS: One hundred twenty specimens of 60 human teeth (protocol number: 032/2007) sectioned mesiodistally were divided into 3 groups according to the adhesives systems used: SB (Adper Single Bond Plus), CB (Clearfil SE Bond) and AP (Adper Prompt Self-Etch). The adhesives were applied on dentin and photo-activated using LED (Lec 1000, MMoptics, 1000 mW/cm2). Customized elastomer molds (0.5 mm thickness) with three orifices of 1.2 mm diameter were placed onto the bonding areas and filled with composite resin (Filtek Z-250), which was photo-activated for 20 s. Each group was subdivided into 4 subgroups for application of the different types of ionizing radiation: ultraviolet radiation (UV), diagnostic x-ray radiation (DX), therapeutic x-ray radiation (TX) and without irradiation (control group, CG). Microshear tests were carried out (Instron, model 4411), and afterwards the modes of failure were evaluated by optical and scanning electron microscope and classified using 5 scores: adhesive failure, mixed failures with 3 significance levels, and cohesive failure. The results of the shear bond strength test were submitted to ANOVA with Tukey's test and Dunnett's test, and the data from the failure pattern evaluation were analyzed with the Mann Whitney test (p = 0.05). RESULTS: No change in bond strength of CB and AP was observed after application of the different radiation types, only SB showed increase in bond strength after UV (p = 0.0267) irradiation. The UV also changed the failure patterns of SB (p = 0.0001). CONCLUSION: The radio-induced changes did not cause degradation of the restorations, which means that they can be exposed to these types of ionizing radiation without weakening the bond strength.

Effect of different exposure times on caries detection and pixel value in a wireless digital system.

OBJECTIVES: : The aim of this study was to assess, using the CDR Wireless®, the effect of different exposure times on caries detection and pixel intensity values. MATERIALS AND METHODS: Forty teeth were x-rayed using a Schick CDR Wireless sensor at eight different exposure times - 0.06, 0.10, 0.13, 0.16, 0.20, 0.25, 0.30, and 0.32 s. Four observers evaluated the images for presence of carious lesions scoring proximal surfaces of each tooth on a 5-point scale. Scores were compared to histological sections of the teeth. Accuracy was evaluated by means of ROC curve analysis. Radiographs of an aluminum step wedge were obtained using the same eight exposure times. Pixel intensity measurements were obtained, and mean pixel values were statistically analyzed using linear regression. RESULTS: The Az for each exposure time varied from 0.53 to 0.62. Two-way analysis of variance and Tukey test demonstrated that the exposure time of 0.25 s presented the best result and was significantly higher than 0.30 s and 0.35 s. In regard to mean pixel values, two different behaviors were observed, and the exposure time of 0.20 s presented mean pixel values in both phases. CONCLUSION: The performance of the exposure times from 0.06 s to 0.25 s was satisfactory for proximal caries detection, and 0.25 s is the best as indicated for this finality. CLINICAL RELEVANCE: Considering that a reduction of exposure time represents a reduction of patient exposure dose, and this reduction cannot neglect image quality, the behavior of any digital system must be carefully evaluated.

Nasolabial cyst: presentation of a clinical case with CT and MR images.

The nasolabial cyst is an uncommon non-odontogenic cyst that develops in the lower region of the nasal ala; its pathogenesis is uncertain. This lesion grows slowly and measures between 1.5 and 3 cm; it is characterized clinically by a floating tumefaction in the nasolabial sulcus, which elevates the upper lip. The diagnosis is based on the clinical findings and, if necessary, image exams. This paper reports a case of a white 48-year-old Brazilian female patient that presented a firm tumor in the left ala of the nose; the clinical features suggested a nasolabial cyst. CT scans revealed an expanding tumor with soft tissue density located in the left ala of the nose. It measured 1.2 cm in diameter and had a clear and well-defined outline; its homogeneous density was about 50 HU. MR images revealed a circular lesion located in soft tissue; T1 and T2 weighted signals were hyperintense, as were images after fat suppression. The diagnosis was a nasolabial cyst, which was confirmed by histopathology after surgery.

Condylar and disk position and signs and symptoms of temporomandibular disorders in stress-free subjects.

BACKGROUND: The authors conducted a study in subjects who tested free of psychological stress to determine the position of the condyle and whether that position was related to signs and symptoms of temporomandibular disorders (TMDs). METHODS: Forty subjects underwent psychological evaluation to ensure freedom from psychological stress. The authors evaluated tenderness of the masticatory muscles and temporomandibular joints (TMJs) by means of bimanual digital palpation, and they determined the positions of the condyle and disk by using magnetic resonance imaging. RESULTS: A total of 23.75 percent of the condyles were displaced away from the centric position either anteriorly (3.75 percent) or posteriorly (20.00 percent). chi(2) analysis showed a relationship between the position of the condyle and displacement of the disk, as well as a relationship between the position of the condyle and tenderness of the TMJs. CONCLUSION: Although these relationships proved significant, it cannot be assumed that displacement of the condyle away from the centric position is predictive of TMD. CLINICAL IMPLICATIONS: Only two subjects were judged to have had TMJ internal derangement. Thus, the absence of psychological stress seems to have played a role in this finding.

Bifid mandibular condyle: a case report.

The bifid mandibular condyle is a rare anomaly. A variety of causes are implicated with its development such as developmental origin and trauma. Because of the lack of epidemiological data, there is little information about the real incidence of this malformation. The purpose of this paper is to report a case of bifid mandibular condyle in a 20-year-old woman who referred to a private radiological clinic for routine dental examination. A panoramic radiography incidentally revealed a discrete modification of the left mandibular condyle. Magnetic resonance imaging (MRI) was taken and confirmed the diagnostic proposed.

Association between maxillary sinus pathologies and healthy teeth.

INTRODUCTION: The proximity of the roots to the maxillary sinus can create a variety of risks. OBJECTIVE: To evaluate the relationship between the roots of healthy teeth and the maxillary sinus, as well as the occurrence of sinus pathologies. METHODS: Three radiologists analyzed 109 cone beam computed tomography (CBCT) images. The Kappa test was used to assess the intra- and inter-rater agreement. The chi-squared test and prevalence ratio were used to test the hypothesis that roots of healthy teeth in the maxillary sinus favored the occurrence of sinus pathologies (p=0.01). RESULTS: Intra- and inter-rater agreement ranged from good to excellent. The chi-squared test demonstrated a statistically significant difference (p=0.006) between the tooth roots in diseased maxillary sinuses (6.09%) and those in normal sinuses (3.43%). The prevalence ratio test showed a statistically significant higher prevalence of tooth roots in diseased sinuses than in normal sinuses (p<0.0001). Roots in the maxillary sinus were 1.82 times more associated with diseased sinuses. CONCLUSION: Dental roots in the maxillary sinus are almost twice as likely to be associated with diseased sinuses than normal sinuses. Healthy teeth whose roots are inside the maxillary sinus may induce an inflammatory response in the sinus membrane. It is suspected that dental procedures may exacerbate the condition.

Panoramic radiography as an auxiliary in detecting patients at risk for cerebrovascular accident (CVA): a case report.

Most cerebrovascular accidents (CVAs), commonly referred to as noncardiogenic strokes, occur as a result of atherosclerosis involving the common, internal and external carotids arteries, due to atheroma formation. Several factors influence atheroma formation, such as hypertension, smoking, diabetes mellitus, hypercholesterolemia, obesity and sedentary lifestyle among others. When atheromas are positioned inside the vessel lumen, they alter the flow of blood, causing the stroke. These atheromas, that are calcified plaques, can be observed in panoramic radiography.

Bone scintigraphy as an adjunct for the diagnosis of oral diseases.

Bone scintigraphy is a very sensitive method for the detection of osteoblastic activity of the skeleton. The technique consists of imaging the uptake of bone-seeking radiopharmaceuticals, particularly technetium-99m labeled diphosphonates, in the mineral component of bone, which consists of hydroxyapatite crystals and calcium phosphate, as well as in the organic matrix such as collagen fibers. Plain radiographs, computed tomography, and magnetic resonance imaging are classified as structural imaging modalities, whereas bone scintigraphy is a functional method. In many cases, radionuclide imaging techniques are the only means by which early physiologic changes that are a direct result of biochemical alteration may be assessed, before significant bone mineral changes can be detected by other means. Since many oral diseases may cause metabolic changes in the oromaxillofacial complex, it would be of great value to use bone scintigraphy to evaluate more completely some conditions involving the bones in the region to formulate more appropriate treatment plans. Based upon the current literature, the authors discuss the possible applications of bone scintigraphy as a diagnostic and treatment planning adjunct for oral diseases. Bone scintigraphy has proven particularly useful in the study of malignant lesions and in the evaluation of vascularized bone grafts used for maxillofacial reconstructions.

Image quality in digital radiographic systems.

The aim of the present study was to evaluate the image quality of four direct digital radiographic systems. Radiographs were made of the maxillary central incisor and mandibular left molar regions of a dry skull, and an aluminum step-wedge. The X-ray generator operated at 10 mA. 60 and 70 kVp, and images were acquired with 3, 5, 8, 12, 24 and 48 exposure pulses. Six well-trained observers classified the images by means of scores from 1 to 3. Collected data were submitted to nonparametric statistical analysis using Fisher's exact test. Statistical analysis showed significant differences (p < 0.01) in image quality with the four systems. Based on the results, it was possible to conclude that: 1) all of the digital systems presented good performance in producing acceptable images for diagnosis, if the exposures of the step-wedge and the maxillary central incisor region were made at 5 pulses, as well as at 8 pulses for the mandibular left molar region, selecting 60 or 70kVp; 2) higher percentages of acceptable images were obtained with the administration of lower radiation doses in CCD-sensors (charge-coupled device); 3) the Storage Phosphor systems produced acceptable images at a large range of exposure settings, that included low, intermediate and high radiation doses.

[Study of the aluminum-zinc alloy as an alternative method of filtration in dental X-ray devices]. / Estudo da liga alumínio-zinco como filtração alternativa em aparelhos de raios X odontológicos.

The aim of this study was to evaluate the effects of alternative filtration with the aluminum-zinc alloy in dental X-ray devices, regarding the energy spectrum, dose, contrast and image quality. This study was carried out comparing the conventional aluminum filter with aluminum-zinc alloy filters of various thicknesses and with different percentages of zinc in the alloy (2, 3, 4 and 5%). A conventional X-ray device operating with 60 and 70 kVp as well as D- and E-speed films were utilized in order to obtain images of a phantom and an aluminum step wedge. The utilization of Al-Zn filters resulted in a spectrum without hardening of beams. The rate of kerma in the air decreased 18.53%, without any alteration in contrast and image quality. The results revealed that the 2% Al-Zn alloy filter with 1.99 mm of thickness, utilized with the tension of 60 kVp and D-speed film, had the best performance. It reduced the rate of kerma without varying the indices of contrast and maintained image quality at acceptable levels, without increasing the time of exposure.

Comparative analysis of mandibular anatomical variations between panoramic radiography and cone beam computed tomography.

PURPOSE: The objective of this study is to compare the ability of panoramic radiography and cone beam computed tomography (CBCT) in detecting anatomical variations of the mandibular canal and mental foramen. METHODS: One hundred twenty-seven preoperative panoramic and CBCT images were evaluated. Two oral and maxillofacial radiologists investigated the presence of bifid mandibular canals and/or additional mental foramina on the right, left, or both sides of the mandible. Intra- and interobserver reliability was determined using Cohen's kappa coefficient. McNemar's test compared the prevalence of mandibular anatomical variations between panoramic radiography and CBCT. The significance level was set at 0.05. RESULTS: Additional mental foramen and bifid mandibular canal were detected in 1.2 and 7.4 % of the panoramic radiographs and 7.4 and 9.8 % of the CBCT images, respectively. The incidence of anatomical variations on the mandibular canal was not significantly different between both imaging modalities (P > 0.05). CONCLUSIONS: Although CBCT provides better viewing of anatomical structures, including location, shape, and relationship with the surrounding area, panoramic radiography is a conventional imaging modality that can be used in the study of the bifid mandibular canals.

Radioprotective effect of sodium selenite on developing teeth.

Radioprotective agents like selenium are used to reduce the damage caused by radiation in healthy tissues. The aim of this study was to evaluate the effect of sodium selenite on the development of the molars of offspring of rats irradiated during odontogenesis. Twenty pregnant rats were randomly divided into 4 groups: control, irradiated, selenium and selenium/irradiated. The selenium and selenium/irradiated groups received 0.3 mg/kg of sodium selenite at 18 days of pregnancy. The rats of the irradiated and selenium/irradiated groups received a single dose of 4 Gy of X rays on the abdominal region at the 19th day of pregnancy. The offspring was sacrificed at 3 and 4 days after birth for evaluation of the birefringence of the enamel organic matrix, and at 30 days for evaluation of the intercuspal dimensions of the molars. The selenium/irradiated group was similar to the irradiated group with respect to the thickness and irregularity of the enamel organic matrix region in the evaluated birefringence, as the intercuspal dimensions of the molars. In conclusion, sodium selenite had no radioprotective action on the development of the molars of offspring of rats irradiated during odontogenesis and had a toxic effect in the initial time.

Diagnosis of invasive cervical resorption by using cone beam computed tomography: report of two cases.

A radiographic interpretation is essential to the diagnosis of invasive cervical resorption (ICR) and the difficulty in distinguishing this lesion from internal root resorption has been highlighted in the literature. This paper reports the use of cone beam computed tomography (CBCT) in the diagnosis of ICR. The cases reports describe how CBCT can be used to make a differential diagnosis and also show that the use of this technology can provide relevant information on the location and nature of root resorption, which conventional radiographs cannot. As a result, the root canal treatment was not initially considered. The patients will be monitored and will undergo a scan after a short period of time to detect any small changes. It was observed that both cases benefited from CBCT in the diagnosis of ICR, because this imaging modality determined the real extent of resorption and possible points of communication with the periodontal space.

Bone density: comparative evaluation of Hounsfield units in multislice and cone-beam computed tomography.

The aim of this study was to evaluate the validity of the bone density value of potential implant sites in HU obtained by a specific cone-beam computed tomography (CBCT) device. In this study, the HU values obtained using a MSCT scanner were used as the gold standard. Twenty mandibles (40 potential implant sites) were scanned using an MSCT scanner (Somatom Sensation 40) and a CBCT scanner (i-CAT). The MSCT images were evaluated using the Syngo CT Workplace software and the CBCT images, using the XoranCat software. The images were evaluated twice by three oral radiologists, at 60 day intervals. The trabecular bone density of the same area was evaluated on both images. Intraclass coefficients (ICC) were calculated to examine the agreement between the examiners and between the two periods of evaluation. The bone density and area of the ROI were compared by the Student t test and Bland-Altman analysis. ICCs were excellent. The mean HU value obtained using CBCT (418.06) was higher than that obtained using MSCT (313.13), with a statistically significant difference (p < 0.0001). In addition, Bland-Altman analysis showed that the HU measures were not equivalent. In conclusion, the bone density in HU with CBCT images obtained using the device studied proved unreliable, since it was higher than that obtained using MSCT.

Gray scale inversion in digital image for measurement of tooth length.

The aim of this study was to assess the applicability of gray scale inversion in performing digital linear endodontic measurements. Standardized digital images were taken of 40 extracted human permanent single-rooted teeth with K-files size 15 placed at different lengths in the root canal, using the CDR Wireless(®) digital system. All images were treated with Positive, a digital tool that inverts the grayscale value. Eight radiologists measured the distance between the lower limit of the rubber stop and the tip of the file on both original and positive images. After 15 days, they repeated this procedure in 50% of the image samples. The intra- and inter-examiner agreement was analyzed by intraclass correlation test, and the comparison between the two image groups and the actual lengths by the Student's t-test (α=0.05). Intra- and inter-examiner evaluation showed high reproducibility (r>0.95) of both original and positive images. No statistically significant differences (p>0.05) were found between measurements performed on original and positive images, but both differed significantly from the actual lengths (p<0.05). Gray scale inversion has low applicability in measuring endodontic files, since it did not improve the accuracy of measurements.