Evaluation of mandibular motion in adolescents with skeletal class II division 1 malocclusion during mandibular advancement using clear functional aligners: a prospective study.

BACKGROUND: This study aimed to evaluate the characteristics of mandibular protrusive condylar trajectory in adolescents with skeletal Class II Division 1 malocclusion and the changes of condylar trajectory during mandibular advancement (MA) treatment using clear functional aligners. METHODS: This prospective study consisted of a cross-sectional study and a longitudinal study. In cross-sectional study, sixty-one adolescents were divided into two groups: Class I (n = 30) and Class II Division 1 (n = 31). The condylar trajectory was measured and compared using the Mann-Whitney U test. The longitudinal study was the MA treatment group using clear functional aligner and consisted of 16 participants from Class II Division 1group. The condylar trajectory was collected at three-time points: pre-treatment (T1), during MA treatment at approximately 3 months (T2, 105.6 days average), and at the end of MA treatment (T3, 237.6 days average). The changes at T1, T2, and T3, as well as the symmetry between the left and right condyles across all groups, were examined using the Wilcoxon paired test. RESULTS: A greater increase in the anteroposterior displacement and space displacement during protrusive movements was observed in the Class II Division 1 group compared with that in the Class I group, with a large difference being observed in the left and right condylar movements. The condylar anteroposterior displacement and space displacement decreased significantly at T2 and increased significantly at T3; however, no significant difference was observed between T1 and T3. A significant difference was observed between the condylar movement on the left and right sides at T1; however, no significant difference was observed at T2 and T3. CONCLUSIONS: Adolescents with Class II Division 1 malocclusion had higher protrusive capacity than those with Class I. Moreover, their left and right condylar motion was more asymmetric. The range of condyle motion decreased first and then increased during MA therapy, and the left and right condyle movement became more symmetrical, which may be the adaptive response of neuromuscular function to the changes in jaw position.

Enhanced Fluorescence Emission and Singlet Oxygen Generation of Photosensitizers Embedded in Injectable Hydrogels for Imaging-Guided Photodynamic Cancer Therapy.

Benefiting from their inherent localized and controlled release properties, hydrogels are ideal delivery systems for therapeutic drugs or nanoparticles. In particular, applications of hydrogels for the delivery and release of photoresponsive drugs or nanoparticles are receiving increasing attention. However, the effect of the hydrogel matrix on the fluorescence emission and singlet oxygen generation efficiency of the embedded photosensitizers (PSs) has not been clarified. Herein, meso-tetrakis(1-methylpyridinium-4-yl)porphyrin (TMPyP) as a water-soluble PS was encapsulated into an injectable hydrogel formed by glycol chitosan and dibenzaldehyde-terminated telechelic poly(ethylene glycol). Compared to free TMPyP solution, the TMPyP encapsulated in the hydrogel exhibits three distinct advantages: (1) more singlet oxygen was generated under the same laser irradiation condition; (2) much longer tumor retention was observed due to the low fluidity of the hydrogel; and (3) the fluorescence intensity of TMPyP was significantly enhanced in the hydrogel due to its decreased self-quenching effect. These excellent characteristics lead to remarkable anticancer efficacy and superior fluorescence emission property of the TMPyP-hydrogel system, promoting the development of imaging-guided photodynamic therapy.

Quantitative evaluation of maxillary interradicular bone with cone-beam computed tomography for bicortical placement of orthodontic mini-implants.

INTRODUCTION: The purpose of this study was to propose a protocol for safe bicortical placement of mini-implants by measuring the interradicular spaces of the maxillary teeth and the bone quality. METHODS: Cone-beam computed tomography data were obtained from 50 adults. Three-dimensional reconstructions and measurements were made with SimplantPro software (Materialise, Leuven, Belgium). For each interradicular site, the bone thicknesses and interradicular distances at the planes 1.5, 3, 6, and 9 mm above the cementoenamel junction were measured. Standard bone units were defined to evaluate the influences of bone density and the different placement patterns on the stability of the mini-implants. RESULTS: The safe interradicular sites in the maxilla for bicortical placement of 1.5-mm-diameter mini-implants were in all planes between the first and second premolars, and between the second premolar and the first molar. The safe palatal sites were between the first and second molars, and the safe labial sites of the 9-mm plane were between the central incisors, and between the lateral incisor and the canine. The safe buccal sites of the 6- and 9-mm planes were between the first and second molars, and the safe buccal sites of the 3-, 6-, and 9-mm planes were between the canine and the first premolar. Most bone thicknesses were from 8 to 12 mm. The optimal placement angle between the second premolar and the first molar was 58°. Bicortical placement could have more standard bone units than unicortical placement in the maxilla. CONCLUSIONS: Bicortical placement would be more stable in the maxilla. For the site between the molars, special care should be taken at a plane higher than 6 mm to prevent maxillary sinus penetration. The most favorable interradicular area in the maxilla was between the second premolar and the first molar.

Enhanced denitrification and p-nitrophenol removal performance via hydrophilic sponge carriers fixed with dual-bacterial: Optimization, performance, and enhancement mechanism.

Effective treatment of industrial wastewater containing complex pollutants, such as nitrate (NO3--N) and organic pollutants, remains a significant challenge to date. Here, a strain Nocardioides sp. ZS2 with denitrification and degradation of p-nitrophenol (PNP) was isolated and its culture conditions were optimized by kinetic analysis. Hydrophilic sponge carriers were prepared using polyvinyl alcohol (PVA), carboxymethyl cellulose (CMC), and chitosan (CS) to construct bioreactors. Furthermore, to further enhance the PNP degradation and denitrification performance of bioreactors, Pseudomonas stutzeri GF2 with denitrification capability was introduced. The results revealed that the removal efficiencies of PNP and NO3--N reached 97.9 % and 91.9 %, respectively, when hydraulic retention time (HRT) of 6 h, C/N of 2.0, and pH of 6.5. The bioreactor exhibited stable denitrification performance even with fluctuations in the influent PNP concentration. The potential functional prediction results revealed that the abundance of amino acids, fatty acids, and carbohydrates increased as the influent C/N decreased, reflecting a tendency of the microbial community to adjust carbon source utilization to maintain cell growth, metabolic balance, and resist adverse C/N environments. This research provides new insights into the effective removal of organic pollutants and NO3--N in wastewater treatment.

Loofah sponge crosslinked polyethyleneimine loaded with biochar biofilm reactor for ecological remediation of oligotrophic water: Mechanism, performance, and functional characterization.

The removal of complex pollutants from oligotrophic water is an important challenge for researchers. In this study, the HCl-modified loofah sponge crosslinked polyethyleneimine loaded with biochar (LS/PEI@biochar) biofilm reactor was adapted to achieve efficient removal of complex pollutants in oligotrophic water. On the 35 d, the average removal efficiency of chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), calcium (Ca2+), and phosphate (PO43--P) in water was 51, 95, 81, and 77 %, respectively. Additionally, it effectively used a low molecular weight carbon source. Scanning electron microscopy (SEM) results showed that the LS/PEI@biochar biocarrier had superior biofilm suspension performance. Meanwhile, analysis of the biocrystals confirmed Ca2+ and PO43- removal through the generation of CaCO3 (calcite and vaterite) and Ca5(PO4)3OH. This study demonstrated that the system has great efficiency and application prospect in treating oligotrophic water on the laboratory scale, and will be further validated for practical application on large-scale oligotrophic water.

The orthodontic implant site-switching technique: a preliminary study in dogs.

BACKGROUND: To evaluate the quantity and quality of bone in the newly formed edentulous area produced by the orthodontic implant site-switching technique. METHODS: The bilateral maxillary first premolars of five beagle dogs were extracted and bone defects were created. The right and left sides of the maxilla were randomly divided into control and experimental sides. On the experimental side, the maxillary second premolar was mesially moved into the position of the missing first premolar. On the control side, the second maxillary premolar was extracted. Six months later, the beagles were euthanized. Microcomputer tomography was used to analyze bone microstructure parameters, alveolar bone height and alveolar bone width of the regenerated bone. Histological analysis was performed by staining tissue sections with toluidine blue. RESULTS: Median BV/TV values in the experimental group (81.78%) were significantly larger than those in the control group (35.67%; p = 0.04). Median Tb.Sp values in the experimental group (0.14 mm) were significantly lower than those in the control group (0.54 mm; p = 0.04). Median Tb.Th values in the experimental group (0.48 mm) were significantly higher than those in the control group (0.21 mm; p = 0.04). Median Tb.Pf values in the experimental group (0.65/mm) were significantly lower than those in the control group (3.15/mm; p = 0.04). There was no significant difference in the trabecular number (Tb.N) between the two groups (p = 0.23). The median alveolar bone height values in the experimental group (-0.81 mm) were significantly higher than those in the control group (-2.11 mm; p = 0.04) at a distance 5 mm from the mesial CEJ of the third premolar. The median alveolar bone height values in the experimental group (0.45 mm) were significantly higher than those in the control group (-1.70 mm; p = 0.04) at a distance 6 mm from the mesial CEJ of the third premolar. There was no significant difference in alveolar bone width when compared between the two groups (p > 0.05). CONCLUSIONS: The newly formed edentulous area created by orthodontic treatment had more compact and thicker trabeculae than the extraction socket. Furthermore, the newly formed edentulous area had a greater alveolar bone height available for the placement of implants.

Building of soft-hard compound brush in porous PVA/NH2@TAtZnO plural gel and the high-efficiency anti-interference removal on Pb(II).

In order to promote the heavy metal ions removal of porous gel adsorbent and protect the adsorbent from other pollutants in wastewater, the tetrapod ZnO whiskers (tZnO) modified by amino-chain brush was introduced into the polyvinyl alcohol (PVA) matrix to prepare the PVA/NH2@TAtZnO composites with brush structure for toxic Pb(II) removal. The adsorption property, adsorption process and adsorption mechanism were studied by adsorption isotherms, adsorption kinetics, adsorption thermodynamics, SEM-EDS analysis and XPS analysis. And the anti-interference ability and anti-interference mechanism were researched by SEM-EDS analysis and XPS analysis. It was found that the PVA/NH2@TAtZnO composites displayed a soft-hard compound pore-brush structure and showed a good selective adsorption on Pb(II). The research of isotherms and kinetics indicated that the adsorption process was fitted well to Langmuir model and pseudo-second-order model, respectively, and the research of thermodynamics revealed the endothermic nature. The adsorption mechanism was inferred as the combination of predominant chemisorption and subsidiary physisorption. Comparing with the neat PVA matrix, the PVA/NH2@TAtZnO composites displayed a good anti-interference property on Pb(II) adsorption and showed an alleviative clogging pore-canal structure in the wastewater with SiO2 NPs or PAC flocculants. The anti-interference intensity ΔQ and anti-interference factor χ were proposed to reflect the anti-interference ability of this adsorbent which was promoted with the increasing amino brush length or density. By the analysis of SEM-EDS and XPS, the anti-interference mechanism was explored as the steric-hinerance effect of tZnO hard brush to suspended SiO2 NPs pollutant and the coordination effect of functional amino soft brush to soluble PAC pollutant. Besides, the prepared PVA/NH2@TAtZnO adsorbent possessed a good reusability under multiple adsorption-desorption processes and also presented a well applicability in real water matrix. The research indicated the huge potential of prepared PVA/NH2@TAtZnO adsorbent in heavy metal ions removal.

Evaluation of the antibacterial activity of Elsholtzia ciliate essential oil against halitosis-related Fusobacterium nucleatum and Porphyromonas gingivalis.

The broad-spectrum antimicrobial activity of Elsholtzia ciliate essential oil (ECO) has been previously reported, but its effectiveness against halitosis-causing bacteria such as Fusobacterium nucleatum and Porphyromonas gingivalis is not well understood. In this study, we investigated the bacteriostatic activity of ECO against planktonic cells and biofilms of F. nucleatum and P. gingivalis, as well as its ability to inhibit bacterial metabolism and production of volatile sulfur compounds (VSCs) at sub-lethal concentrations. Our findings revealed that ECO exhibited comparable activities to chlorhexidine against these oral bacteria. Treatment with ECO significantly reduced the production of VSCs, including hydrogen sulfide, dimethyl disulfide, and methanethiol, which are major contributors to bad breath. As the major chemical components of ECO, carvacrol, p-cymene, and phellandrene, were demonstrated in vitro inhibitory effects on F. nucleatum and P. gingivalis, and their combined use showed synergistic and additive effects, suggesting that the overall activity of ECO is derived from the cumulative or synergistic effect of multiple active components. ECO was found to have a destructive effect on the bacterial cell membrane by examining the cell morphology and permeability. Furthermore, the application of ECO induced significant changes in the bacterial composition of saliva-derived biofilm, resulting in the elimination of bacterial species that contribute to halitosis, including Fusobacterium, Porphyromonas, and Prevotella. These results provide experimental evidence for the potential clinical applications of ECOs in the prevention and treatment of halitosis.

Nanomechanical probing of bacterial adhesion to biodegradable Zn alloys.

Bacterial infections on implants cause an inflammatory response and even implant failure. Bacterial adhesion is an initial and critical step during implant infection. The prevention of bacterial adhesion to implant materials has attracted much attention, especially for biodegradable metals. A deep understanding of the mechanisms of bacterial adhesion to biodegradable metals is urgently needed. In this work, a bacterial probe based on atomic force spectroscopy was employed to determine the bacterial adhesion to Zn alloy, which depended on surface charge, roughness, and wettability. Negative surface charges of Zn, Zn-0.5Li, and 316L generated electrostatic repulsion force towards bacteria. The surface roughness of Zn-0.5Li was significantly increased by localized corrosion. Bacterial adhesion forces on Zn, Zn-0.5Li, and 316L were 325.2 pN, 519.1 pN, and 727.7 pN, respectively. The density of attached bacteria (early-stage bacterial adhesion) on these samples exhibited a positive correlation with the bacterial adhesion force. The bacterial adhesion force and adhesion work provide a quantitative determination of the interactions between bacteria and biodegradable alloys. These results provide a deeper understanding of early bacterial adhesion on Zn alloys, which can further guide the antibacterial surface design of biodegradable materials for clinical application.

GAT-FD: An integrated MATLAB toolbox for graph theoretical analysis of task-related functional dynamics.

Functional connectivity has been demonstrated to be varying over time during sensory and cognitive processes. Quantitative examinations of such variations can significantly advance our understanding on large-scale functional organizations and their topological dynamics that support normal brain functional connectome and can be altered in individuals with brain disorders. However, toolboxes that integrate the complete functions for analyzing task-related brain functional connectivity, functional network topological properties, and their dynamics, are still lacking. The current study has developed a MATLAB toolbox, the Graph Theoretical Analysis of Task-Related Functional Dynamics (GAT-FD), which consists of four modules for sliding-window analyses, temporal mask generation, estimations of network properties and dynamics, and result display, respectively. All the involved functions have been tested and validated using functional magnetic resonance imaging data collected from human subjects when performing a block-designed task. The results demonstrated that the GAT-FD allows for effective and quantitative evaluations of the functional network properties and their dynamics during the task period. As an open-source and user-friendly package, the GAT-FD and its detailed user manual are freely available at https://www.nitrc.org/projects/gat_fd and https://centers.njit.edu/cnnl/gat_fd/.

Hierarchy-Assembled Dual Probiotics System Ameliorates Cholestatic Drug-Induced Liver Injury via Gut-Liver Axis Modulation.

Cholestatic drug-induced liver injury (DILI) induced by drugs or other xenobiotics is a severe and even fatal clinical syndrome. Here, living materials of hierarchy-assembled dual probiotics system are fabricated by sequentially encapsulating probiotic Lactobacillus delbrueckii subsp. bulgaricus (LDB) and Lactobacillus rhamnosus GG (LGG) into Ca2+ -complexed polymer microspheres for effective prevention of cholestatic DILI. Upon entering intestinal tract of the constructed living materials, LGG is released because of pH-triggered dissolution of outer enteric polymer coating. The released LGG can inhibit hepatic bile acids (BAs) synthesis by activating intestinal farnesoid X receptor-fibroblast growth factor 15（FGF-15) signaling pathway. BAs excretion is also facilitated by LGG through increasing the abundance of bile salt hydrolase (BSH)-active gut commensal bacteria. Furthermore, exposed positively-charged chitosan shell can absorb the excessive BAs via electrostatic interaction, which leads to steady BAs fixation by the imprisoned LDB, decreasing the total BAs amounts in enterohepatic circulation. Together, the fabricated living materials, obtained here, can effectively prevent cholestatic DILI through dredging cholestasis via gut-liver axis modulation. The therapeutic effect is demonstrated in α-naphthylisothiocyanate and clinical antiepileptic drug valproate acid-induced cholestatic DILI mouse models, which reveal the great potential for effective cholestatic DILI management.

Clinical characteristics of 68 children with atypical hand, foot, and mouth disease caused by coxsackievirus A6: a single-center retrospective analysis.

Background: Hand, foot, and mouth disease (HFMD) caused by coxsackievirus A6 (CV-A6) has become prevalent in many parts of the world. It is commonly referred to as atypical HFMD which more likely to present as bullous lesions. Compared with traditional HFMD, its misdiagnosis rate is relatively high, which brings difficulties to clinical diagnosis. We retrospectively analyze the clinical characteristics of children with HFMD with bullous lesions caused by CV-A6. Methods: The study included 68 children with atypical HFMD caused by CV-A6 who were hospitalized from 2018 to 2020. Data of the children including age, sex, month of HFMD onset, the morphologies and distribution of rashes, the details of fever, the presence or absence of onychomadesis, and laboratory test results were analyzed and compared between an infant group (<1 year), a toddler group (1-<3 years), and a preschool group (3-<6 years). Results: Of the 68 children, 67 were younger than 5 years old, with a male to female ratio of 1.62:1. The disease peaked in the period from June to September. With 75.0% of the infant group had more than three kinds of rashes; 95.0% of the preschool group had rashes in more than five locations. These differences were statistically significant (P<0.05). All children had fever. The peak fever in the toddler group was lower (P=0.033). No critical cases were observed in any of the groups. Of the 61 children who were successfully followed up, 68.9% developed onychomadesis within 2-3 weeks. The proportion of cases with abnormal liver function was 83.3%, 41.7%, and 10.0% in the infant, toddler, and preschool groups (P<0.001). The proportion of cases with increased serum creatine kinase MB isoenzyme (CK-MB) were significantly higher in the toddler group (P<0.05). Conclusions: Atypical HFMD caused by CV-A6 infection usually occurred in children under 5 years old. The morphologies of the rashes in the infant group changed more, while the rashes in the preschool group was more widely distributed. The incidence of critical cases was low. More than half of the cases can develop onychomadesis in the recovery period. Organ damage was relatively mild in the preschool group.

External apical root resorption in orthodontic tooth movement: the risk factors and clinical suggestions from experts' consensus.

External apical root resorption is among the most common risks of orthodontic treatment, and it cannot be completely avoided and predicted. Risk factors causing orthodontic root resorption can generally be divided into patient- and treatment-related factors. Root resorption that occurs during orthodontic treatment is usually detected by radiographical examination. Mild or moderate root absorption usually does no obvious harm, but close attention is required. When severe root resorption occurs, it is generally recommended to suspend the treatment for 3 months for the cementum to be restored. To unify the risk factors of orthodontic root resorption and its clinical suggestions, we summarized the theoretical knowledge and clinical experience of more than 20 authoritative experts in orthodontics and related fields in China. After discussion and summarization, this consensus was made to provide reference for orthodontic clinical practice.

Knockdown of MALAT1 Inhibits the Progression of Chronic Periodontitis via Targeting miR-769-5p/HIF3A Axis.

PURPOSE: Chronic periodontitis (CP) is a long-lasting inflammatory disease that seriously affects oral health. This study is aimed at investigating the regulatory mechanism of metastasis-associated lung adenocarcinoma transcript 1 (MALAT1) in CP. METHODS: Primary human periodontal ligament cells (PDLCs) were treated with P. gingivalis lipopolysaccharide (LPS) to establish a CP model. Quantitative real-time PCR (qRT-PCR) was used to measure the expression of MALAT1 and miR-769-5p in gingival tissues of patients with CP and LPS-treated PDLCs. Cell viability was detected by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay. Enzyme-linked immunosorbent assay (ELISA) was used to measure the levels of inflammatory cytokines. The protein levels of caspase-3, Bax, Bcl-2, and hypoxia-inducible factor (HIF) 3A were determined by western blot assay. Dual-luciferase reporter (DLR) assay was applied to validate the target relationships between miR-769-5p and MALAT1/HIF3A. RESULTS: The expression of MALAT1 and HIF3A was enhanced, and the expression of miR-769-5p was reduced in gingival tissues of patients with CP and LPS-treated PDLCs. MALAT1 knockdown promoted cell viability and inhibited inflammation and cell apoptosis in LPS-treated PDLCs. MALAT1 targeted miR-769-5p and negatively regulated miR-769-5p expression. miR-769-5p overexpression promoted cell viability and inhibited inflammation and cell apoptosis in LPS-treated PDLCs. Besides, miR-769-5p targeted HIF3A and negatively modulated HIF3A expression. Both miR-769-5p inhibition and HIF3A overexpression reversed the inhibitory effects of MALAT1 silencing on LPS-induced PDLC injury in vitro. CONCLUSION: MALAT1 knockdown attenuated LPS-induced PDLC injury via regulating the miR-769-5p/HIF3A axis, which may supply a new target for CP treatment.

Microbial succession and degradation during kitchen waste biodrying, highlighting the thermophilic phase.

Biodrying in conjunction with compound stone amendment was used to treat kitchen waste, which improved biodrying. After 16 days, the pile moisture content decreased from 68.8% to 23.0%. Lignin, cellulose and hemicellulose concentrations decreased from 104.6 mg g-1 d.b., 322.9 mg g-1 d.b. and 155.9 mg g-1 d.b., respectively, to 74.0 mg g-1 d.b., 224.8 mg g-1 d.b. and 134.5 mg g-1 d.b., respectively. The Shannon index for bacteria increased from 2.5 to 3.1, while for fungi, it decreased from 4.6 to 0.6. The relative abundances of Amino Acid Metabolism and Carbohydrate Metabolism exceeded 7%. The thermophilic phase during the process inactivated the pathogenic microorganisms, increased the bacterial diversity, decreased the fungal diversity, and potentially improved the metabolism of nutrients, including amino acids, carbohydrates, lipids and vitamins. The biomarker analysis and predicated protein sequences provide genetic evidence to elucidate why the thermophilic phase is the peak time for nutrient metabolism.

Orthodontic force accelerates dentine mineralization during tooth development in juvenile rats.

Malocclusion, the improper positioning of the teeth and jaws, is among the most important global oral health burdens. People with malocclusion may require orthodontic treatment to correct the problem. Orthodontic treatment is a way of straightening or moving teeth, to improve the appearance of the teeth and how they work. It is generally best carried out in children aged 9 to 12 years, whose teeth are mainly young permanent teeth with incomplete root formation. However, the relationship between orthodontic force and tooth development has not been fully understood. In this study, we sought to investigate the effects of orthodontic force on dentine formation and mineralization during the development of young permanent teeth. Standardized orthodontic tooth movement was performed with the orthodontic appliance in five-week-old rats. To obtain longitudinal assessment of dentine formation, tetracycline was administered on the operation day and 1, 3, 7, 14 or 21 days afterward. We found that the distance between two tetracycline stripes, which indicates the amount of dentine formation during orthodontic treatment, increased with time. Importantly, no significant difference was detected in dentine formation between treated and control rats. In contrast, immunohistochemical analysis showed that the expression of dentin sialoprotein, a marker of odontoblast differentiation and mineral apposition, was significantly elevated in crown and root dentine after orthodontic treatment. In conclusion, orthodontic treatment does not affect the dentine formation of young permanent teeth, but it promotes the activation of odontoblasts and accelerates the dentine mineralization. These results suggest the safety of early orthodontic treatment.

Periostin-modified bone marrow mesenchymal stem cells from osteoporotic rats promote alveolar bone regeneration.

Bone regeneration is impaired in patients with osteoporosis. Previous studies have shown that periostin (Postn) shows great potential in bone regeneration treatments. However, the role of Postn in bone marrow mesenchymal stem cells (BMMSCs) remains to be elucidated. In this study, we isolated BMMSCs from ovariectomized rats (OVX-BMMSCs) and normal rats. Then, the expression levels of Postn and osteogenesis in OVX-BMMSCs were detected by alizarin red and alkaline phosphatase substrate staining, qPCR, and western blotting. We found that the levels of Postn in OVX-BMMSCs were significantly reduced. Furthermore, Postn overexpression in OVX-BMMSCs using recombinant lentivirus could improve the expression of alkaline phosphatase, runt-related transcription factor 2, and osteocalcin and reduce the expression of sclerostin. Besides, micro-computed tomography analysis, hematoxylin-eosin, and Masson's staining showed that the healing of the alveolar bone defect in osteoporotic rats could be promoted using Postn-modified OVX-BMMSC sheets. In conclusion, Postn-modified OVX-BMMSCs might restore the osteogenic capacity and promote alveolar bone regeneration, which may serve as a new therapeutic approach for bone regeneration in osteoporosis.

Preparation of PVA/tetra-ZnO composite with framework-supported pore-channel structure and the removal research of lead ions.

Polyvinyl alcohol (PVA) filled with different kinds of ZnO whisker was prepared by chemical cross-linking reaction. It was found that the ZnO whiskers dispersed uniformly after being modified by 3-aminopropyltriethoxysilane (APTES). The PVA/tetrapod-shaped ZnO (PVA/tetra-ZnO) composites showed better adsorption performance than other kinds of PVA/ZnO composites. The framework-supported pore-channel structure was beneficial for the transmission and adsorption of heavy metal ions, and the formation of "brush" pore-channel of PVA/tetra-ZnO composites can effectively retain and capture the heavy metal ions. The PVA/tetra-ZnO composites presented well adsorption on Pb(II), Cd(II), and Cr(III) ions than Ni(II) and showed relatively selective removal on Pb(II) and Cr(III) ions. The adsorbed heavy metal ions presented gradient distribution with high content in the out layer and low content in the inner layer. Pb(II) adsorption capacity qe increased gradually with the increase of initial solution concentration and contact time which tended to be stable at 400 mg/L and 800 min. The maximal adsorption capacity qm obtained by nonlinear fitting reached to about 116 mg/g which was very close to the experiment data. Adsorption isotherm results indicated the monolayer adsorption process of the Langmuir model and the adsorption kinetics data fitted well to the pseudo-second-order model. The adsorption process was spontaneous and the high temperature was in favor of adsorption. The adsorption mechanism was explored as the combination of coordination and ion exchange. Besides, the PVA/tetra-ZnO composites exhibited better stress stability, thermo stability, and favorable regeneration than neat PVA.

AIE-active self-assemblies from a catalyst-free thiol-yne click reaction and their utilization for biological imaging.

Aggregation-induced emission (AIE) should be the most interest fluorescent phenomenon over the past few decades. The luminescence polymeric nanoparticles (LPNs) with AIE characteristic have attracted great research attention for biological imaging and many other biomedical applications owing to their good biocompatibility and negative toxicity. However, the preparation of LPNs with desirable optical properties using traditional organic dyes still remains a great challenge for the aggregation-caused quenching (ACQ) effect and aggregation of hydrophobic dyes in the core of LPNs. In this work, we reported a novel and simple method for fabrication of biodegradable AIE-active LPNs via the combination of condensation and click reactions. For preparation of these AIE-active LPNs, the thiol groups-containing hydrophilic copolymers (PEG-MA) were first synthesized through the condensation reaction between polyethylene glycol and mercaptosuccinic acid. The PEG-MA copolymers were further reacted with AIE dye PhE-OE through a catalyst-free thiol-yne click reaction. These obtained PEG-MA-PhE LPNs were fully characterized by a number of characterization techniques. All the results confirmed that PEG-MA-PhE LPNs possess excellent compatibility, intense red luminescence, great photostability and high water dispersibility. These features make PEG-MA-PhE LPNs promising candidates for various biomedical applications.

Sliced Magnetic Polyacrylamide Hydrogel with Cell-Adhesive Microarray Interface: A Novel Multicellular Spheroid Culturing Platform.

Cell-adhesive properties are of great significance to materials serving as extracellular matrix mimics. Appropriate cell-adhesive property of material interface can balance the cell-matrix interaction and cell-cell interaction and can promote cells to form 3D structures. Herein, a novel magnetic polyacrylamide (PAM) hydrogel fabricated via combining magnetostatic field induced magnetic nanoparticles assembly and hydrogel gelation was applied as a multicellular spheroids culturing platform. When cultured on the cell-adhesive microarray interface of sliced magnetic hydrogel, normal and tumor cells from different cell lines could rapidly form multicellular spheroids spontaneously. Furthermore, cells which could only form loose cell aggregates in a classic 3D cell culture model (such as hanging drop system) were able to be promoted to form multicellular spheroids on this platform. In the light of its simplicity in fabricating as well as its effectiveness in promoting formation of multicellular spheroids which was considered as a prevailing tool in the study of the microenvironmental regulation of tumor cell physiology and therapeutic problems, this composite material holds promise in anticancer drugs or hyperthermia therapy evaluation in vitro in the future.