Refining and in-situ growth of polyaniline endows the cellulose fibers with electrical stimulation sterilization.

Bacteria and virus infections have posed a great threat to public health and personnel safety. For realizing rapid sterilization of the bacteria and virus, electrical stimulation sterilization was adopted to endow cellulose fibers with instantaneous antibacterial and antiviral properties. In the proposed strategy, the fiber is fluffed by mechanical refining, and then by means of the hydrogen bond between hydroxyl and aniline, the polyaniline (PANI) directionally grows vertically along the fine fibers via in-situ oxidative polymerization. Benefiting from the conductive polyaniline nanorod arrays on the fiber stem, the paper made from PANI modified refined fibers (PANI/BCF/P) exhibited excellent antibacterial and antiviral activity, the inhibition rates against S. aureus, E. coli, and bacteriophage MS2 can up to 100 %, 100 %, and 99.89 %, respectively when a weak voltage (2.5 V) was applied within 20 min. This study provides a feasible path for plant fiber to achieve efficient antibacterial and antiviral activity with electrical stimulation, which is of great significance for the preparation of electroactive antibacterial and antiviral green health products.

Enhancing plant fiber antibacterial and antiviral performance through synergistic action of amino and sulfonic acid groups.

As the most abundant renewable resource, cellulose fibers are potential candidates for use in health-protective clothing. Herein, we demonstrate a novel strategy for preparing cellulose fiber with prominent antibacterial and antiviral performance by the synergistic effect of amino groups and sulfonic acid groups. Specifically, guanylated chitosan oligosaccharide (GCOS) and N-sulfopropyl chitosan oligosaccharide (SCOS) were synthesized and chemically grafted onto cellulose fibers (CFs) to endow the fibers with antibacterial and antiviral properties. Moreover, a compounding strategy was applied to make the fibers with simultaneously high antibacterial and antiviral activity, especially in short contact time. The bacteriostatic rate (against S. aureus: 95.81 %, against E. coli: 92.07 %, 1 h) of the compounded fibers improved substantially when a few GCOS-CFs were mixed with SCOS-CFs; especially, it was much higher than both the individual GCOS-CFs and SCOS-CFs. By contrast, the improvement of the antiviral properties was less dramatic; however, even a few SCOS-CFs was mixed, the antiviral properties increased pronouncedly. Although the electrostatic interaction between SCOS and GCOS can make the SCOS-GCOS mixture lose some extent of antibacterial activity, the long chains of cellulose restrain the electrostatic interaction between sulfonic and amino groups, leading to their synergistic action and eventually superior antibacterial and antiviral effects.

PEO/cellulose composite paper based triboelectric nanogenerator and its application in human-health detection.

Recently, cellulose paper based triboelectric nanogenerators (CPTENGs) has gained widely attention due to the development of wearable, green and miniaturized electronic products. Modification of cellulose fibers or paper is a feasible method to improve the output performance of CPTENGs, however, the simple and effective routes to improve the triboelectric property of cellulose paper still remain a challenge. Herein, we report a simple method to prepare PEO/cellulose composite paper (PEO/CCP) via mixing polyethylene oxide (PEO) with cationic cellulose fibers. Benefiting from amino groups and PEO, the composite paper exhibits higher triboelectric positive property and triboelectric charge density, thereby endowing PEO/CCP based TENG with outstanding output performance. The voltage, current and power density peak values of PEO/CCP based TENG exhibited linear relationship with amino groups content; in this instance, the performance of the TENGs can be readily adjusted by the amino groups. The voltage, current and power density of PEO/CCP based TENG can be up to 222.1 V, 4.3 µA, and 217.3 mW•m-2, respectively. Moreover, a human-health detection device based on this TENG can monitor the physiological signals such as eye muscles, respiration, heart beat and wrist pulse, promising potentials for applications in human health-care.

Wearable lignin-based hydrogel electronics: A mini-review.

In recent years, various biomacromolecule-based hydrogels have been extensively and deeply studied in the field of wearable electronics. However, the application of lignin-based hydrogels in flexible devices is still in its infancy. This is mainly due to the significant differences in physical and chemical properties of industrially extracted lignin. In order to seek the universal applicability of diversified lignin in the preparation of hydrogel electronics, we mainly paid attention to the natural physical and chemical properties of lignin to discuss feasible solutions for functional gel design. These properties include chemical reactivity, UV shielding, antibacterial, bio-degradability, anti-oxidation, etc. Finally, in view of lignin's unique properties and the demand for high-quality flexible electronics, some insights are proposed regarding the future research and development directions of lignin-based hydrogel electronics.

An oriented Fe3+-regulated lignin-based hydrogel with desired softness, conductivity, stretchability, and asymmetric adhesiveness towards anti-interference pressure sensors.

The development of conductive, soft, ultra-stretchable, and asymmetrically adhesive hydrogels is difficult and essential for both wearable electronics and anti-adhesion tissue dressings. In particular, there is still no simple, effective and universal approach to construct an asymmetrically adhesive multifunctional hydrogel. Here, we first synthesized lignosulfonate sodium (LS)-doped PAA hydrogels with uniform adhesion (adhesive strength: ~30.5 kPa), conductivity (~0.45 S/m), stretchability (up to ~2250%), and low compressive modulus (~20 kPa). In the second step, an oriented soaking of Fe3+ onto the upper surface of the resultant composite hydrogel renders the upper surface non-adhesive. This novel strategy masterfully delivers asymmetric adhesion behavior to the upper and bottom surfaces of the same hydrogel (~0 kPa adhesive strength for the upper surface; strong adhesive strength of ~27 kPa for the bottom surface). The asymmetric adhesive hydrogel has proven to adhere well onto the human skin and achieve waste-barrier. Importantly, this hydrogel assembled pressure sensor demonstrates excellent anti-interference and wearable comfort.

Biosynthesis of Alanyl-Histidine Dipeptide Catalyzed by Papain Immobilized on Magnetic Nanocrystalline Cellulose in Deep Eutectic Solvents.

Papain (PA) immobilized onto magnetic nanocrystalline cellulose (PA@MNCC) was successfully fabricated and adopted as an efficient biocatalyst for the synthesis of N-(benzyloxycarbonyl)-alanyl-histidine (Z-Ala-His) dipeptide. Introducing deep eutectic solvents (DESs) as reaction media promoted the synthesis of the Z-Ala-His dipeptide. The effects of reaction conditions on the yield of papain catalytic Z-Ala-His were systematically investigated with the highest yield of 68.4%, which was higher than free papain (63.3%). Besides, this novel PA@MNCC composite can be easily recycled from the reaction system by magnetic forces. In a word, the PA@MNCC composite exhibited great potential for efficient biosynthesis of dipeptide in DESs.

Improving biocatalysis of cefaclor with penicillin acylase immobilized on magnetic nanocrystalline cellulose in deep eutectic solvent based co-solvent.

Deep eutectic solvent (DES), has been considered as a new type of green solvent applied in enzymatic systems. Here, we reported DES-buffer co-solvent as a novel reaction medium for high efficient synthesis of cefaclor by penicilin acylase immobilized on magnetic nanocrystalline cellulose. Effect of DES composition, DES-buffer ratio, temperature, pH, substrate ratio and substrate concentration was systematically investigated. In co-solvent consisting of choline chloride (ChCl):glycol-buffer (7:3, v/v), conversion of 7-ACCA was 94%, synthesis to hydrolysis ratio was 1.8, and yield of cefaclor reached 91%, higher than that in aqueous buffer with optimized yield of 84%, showing the great potential of DES as organic solvent alternative. To the best of our knowledge, this is the first example of biosynthesis of cefaclor in the DES-buffer co-solvent.

Insight into the structure-function relationships of deep eutectic solvents during rice straw pretreatment.

Rice straw pretreatment mediated by choline chloride (ChCl) or lactic acid (Lac) sequences deep eutectic solvents (DESs) was investigated in this work. Hydrogen bond acceptors (HBAs) and hydrogen bond donors (HBDs) proved to be both important for DESs pretreatment efficiency. DESs containing lots of hydroxyl or amino groups with a high intermolecular hydrogen-bond (H-bond) strength exhibited weak biomass deconstruction abilities. The presence of strong electron-withdrawing groups in DESs was benefit for xylan removal, thus furnishing higher cellulose digestibility. The relationships between the properties of DESs, xylan removal and cellulose digestibility of pretreated biomass were established. It was found that xylan removal was negatively correlated with the pKa values of HBDs, and the enzymatic cellulose digestibility of the residues was linearly and positively related to xylan removal instead of delignification. These results provide a preliminary reference for rational design of novel DESs for biomass pretreatment.

Preparation and Characterization of Immobilized Lipase from Pseudomonas Cepacia onto Magnetic Cellulose Nanocrystals.

Magnetic cellulose nanocrystals (MCNCs) were prepared and used as an enzyme support for immobilization of Pseudomonas cepacialipase (PCL). PCL was successfully immobilized onto MCNCs (PCL@MCNC) by a precipitation-cross-linking method. The resulting PCL@MCNC with a nanoscale size had high enzyme loading (82.2 mg enzyme/g) and activity recovery (95.9%). Compared with free PCL, PCL@MCNC exhibited significantly enhanced stability and solvent tolerance, due to the increase of enzyme structure rigidity. The observable optimum pH and temperature for PCL@MCNC were higher than those of free PCL. PCL@MCNC manifested relatively higher enzyme-substrate affinity and catalytic efficiency. Moreover, PCL@MCNC was capable of effectively catalyzing asymmetric hydrolysis of ketoprofenethyl ester with high yield of 43.4% and product e.e. of 83.5%. Besides, immobilization allowed PCL@MCNC reuse for at least 6 consecutive cycles retaining over 66% of its initial activity. PCL@MCNC was readily recycled by magnetic forces. Remarkably, the as-prepared nanobiocatalyst PCL@MCNC is promising for biocatalysis.

Preparation of microfibrillated cellulose/chitosan-benzalkonium chloride biocomposite for enhancing antibacterium and strength of sodium alginate films.

The nonantibacterial and low strength properties of sodium alginate films negatively impact their application for food packaging. In order to improve these properties, a novel chitosan-benzalkonium chloride (C-BC) complex was prepared by ionic gelation using tripolyphosphate (TPP) as a coagulant, and a biocomposite obtained through the adsorption of C-BC complex on microfibrillated cellulose, MFC/C-BC, was then incorporated into a sodium alginate film. The TEM image showed that the C-BC nanoparticles were spherical in shape with a diameter of about 30 nm, and the adsorption equilibrium time of these nanoparticles on the surface of MFC was estimated to be 6 min under the driving forces of hydrogen bonds and electrostatic interactions. According to the disc diffusion method, the MFC/C-BC biocomposite-incorporated sodium alginate film exhibited remarkable antibacterial activity against Staphylococcus aureus and certain antibacterial activity against Escherichia coli . The strength tests indicated that the tensile strength of the composite sodium alginate film increased about 225% when the loading of MFC/C-BC biocomposite was 10 wt %. These results suggested that the MFC/C-BC biocomposite-incorporated sodium alginate film with excellent antibacterial and strength properties would be a promising material for food packaging, and the MFC/C-BC may also be a potential multifunctional biocomposite for other biodegradable materials.