Comparison of preoperative anxiety, bruxism, and postoperative pain among patients undergoing surgery for septoplasty, endoscopic sinus surgery, and tympanoplasty.

Background: Septoplasty, endoscopic sinus surgery, and tympanoplasty are the most commonly performed elective functional ear-nose-throat surgeries. Aim: This study investigated the relationship between preoperative anxiety, bruxism, and postoperative pain in inpatient groups undergoing three different functional otorhinolaryngologic surgeries. Patients and. Methods: This study was conducted in a single center of a tertiary referral hospital. The patients (n = 90) who had undergone septoplasty (group A), endoscopic sinus surgery (group B), and tympanoplasty (group C) were included. The State-Trait Anxiety Inventory (STAI) questionnaire and the Amsterdam Preoperative Anxiety Information Scale (APAIS) were administered. To evaluate bruxism, a self-questionnaire was administered, and for the evaluation of pain, the visual analogue scale (VAS) was administered. Results: In group C, preoperative STAI and APAIS and early and late pain values were higher than in the other groups. When patients were divided into two groups according to the presence of bruxism. A significant difference was found between the preoperative STAI and immediate and late VAS values (P < 0.001). A strong correlation was observed between APAIS and early and late VAS values in group C (P < 0.001). Conclusion: Patients who will undergo tympanoplasty should be aware of the preoperative anxiety level and pain follow-up. Bruxism can be considered a vital follow-up parameter that manifests due to high preoperative anxiety. It may also be useful to examine preoperative bruxism and take appropriate measures due to its pain-increasing effect in patients.

Turkish Adaptation of Dentine Hypersensitivity Experience Questionnaire (DHEQ).

OBJECTIVE: The Dentine Hypersensitivity Experience Questionnaire (DHEQ) is a valid and reliable instrument for oral health-related quality of life (OHRQoL) studies. This study aimed to assess the Turkish version of the DHEQ and determine the effects of degree of DH, sex, and age on OHRQoL. MATERIALS: The study participants were 251 DH patients (age 18-78 years; 68.5% female) who completed the Turkish version of the DHEQ. The reliability of the instrument was assessed in terms of internal consistency, using item-total correlations and Cronbach's alpha and test-retest reliability using intra-class correlation coefficients (ICCs) among 51 patients who repeated the DHEQ following a 2-week interval. Construct validity was determined based on exploratory factor analysis (EFA). Convergent validity was tested through correlating DHEQ total and subscale scores with the global rating of oral health and effect on life overall. Discriminative validity was tested by comparing the total and subscale scores against the degree of sensitivity. RESULTS: Patients with more severe hypersensitivity showed higher DHEQ scores and greater OHRQoL impairment. Female and older (⟩40 years) patients had significantly greater OHRQoL impairment. Cronbach's alpha exceeded 0.70, indicating good internal consistency reliability. The ICC values measured were ⟩0.60 for the overall scale and each subscale of the DHEQ, signifying good to excellent test-retest reliability. CONCLUSION: The results suggested that the Turkish version of the DHEQ is appropriate for assessing the OHRQoL among people with dentine hypersensitivity.

Clinical evaluation of microhybrid composites in noncarious cervical lesions: 24-month results.

OBJECTIVE: To evaluate the clinical performance of two different microhybrid resin composites in noncarious cervical lesions (NCCLs) after 24 months. SUBJECTS AND METHODS: Ninety-seven NCCLs were restored with either TPH Spectrum (n = 48) or Filtek Z250 (n = 49) using an etch-and-rinse adhesive in 20 patients. The restorations were clinically evaluated using modified United States Public Health Service criteria for retention, color match, marginal discoloration, marginal adaptation, surface texture, anatomic form, postoperative sensitivity, and secondary caries. The restorations were assessed 1 week after placement (baseline) and after 6, 12, and 24 months. Restoration survival rates were calculated using the Kaplan-Meier procedure estimator, and a log-rank test was used to compare the survival distributions (P < 0.05). Statistical analysis was undertaken using Pearson's Chi-square test and Fisher's exact test to assess differences among the restorative materials (P < 0.05). Cochran's Q-test was employed for evaluating differences in the same restorative material between recall periods. RESULTS: The retention rates were 100% at 6 months, 89.6% and 91.8% at 12 months, and 85.4% and 89.8% at 24 months for TPH and Z250, respectively. TPH showed a statistically significant difference in marginal discoloration between the baseline and 24 months results (P < 0.05). Both TPH and Z250 showed statistically significant differences in marginal adaptation between the baseline and 24 months results (P < 0.05). CONCLUSION: Over the 24-month period, both microhybrid resin composites demonstrated acceptable clinical results in NCCLs.

Effect of laser and air abrasion pretreatment on the microleakage of a fissure sealant applied with conventional and self etch adhesives.

AIM: The purpose of this study was to investigate the effects of different pretreatment protocols along with different bonding agents on the microleakage of a fissure sealant material. METHOD: A total of 144 freshly extracted noncarious human third molars were used The teeth were randomly assigned into three groups with respect to the pretreatment protocol employed: A. Air Abrasion B. Er,Cr:YSGG laser C. No pretreatment (Control). In each group specimens were further subjected to one of the following procedures before application of the sealant: 1. %36 Phosphoric acid-etch (AE) (DeTrey Conditioner 36/Denstply, UK) 2.AE+Prime&Bond NT (Dentsply, UK) 3. Clearfil S3 Bond (Kuraray, Japan) 4. Clearfil SE Bond (Kuraray, Japan). All teeth were sealed with the same fissure sealant material (Conseal F/SDI, Australia). Sealed teeth were further subjected to thermocycling, dye penetration test, sectioning and quantitative image analysis. Statistical evaluation of the microleakage data was performed with two way independent ANOVA and multiple comparisons test at p = 0.05. For qualitative evaluation 2 samples from each group were examined under Scanning Electron Microscopy. RESULTS: Microleakage was affected by both the type of pretreatment and the subsequent bonding protocols employed (p < 0.05). Overall, the highest (Mean = 0.36 mm) and lowest (Mean = 0.06 mm) microleakage values were observed in samples with unpretreated enamel sealed by S3+Conseal F and samples with laser pretreated enamel sealed by Acid Etch+Prime&-Bond+Conseal F protocols, respectively (p < 0.05). In the acid-etch group samples pretreated with laser yielded in slightly lower microleakage scores when compared with unpretreated samples and samples pretreated with air abrasion but the statistical significance was not important (p = 0,179). Similarly, when bonding agent is applied following acid-etching procedure, microleakage scores were not affected from pretreatment protocol (p = 0,615) (intact enamel/laser or air-abrasion). For both all-in one and two step self etch adhesive systems, unpretreated samples demonstrated the highest microleakage scores. CONCLUSIONS: For the groups in which bonding agent was utilized, pretreatments did not effected microleakage. Both the tested pretreatment protocols and adhesive procedures had different effects on the sealing properties of Conseal F in permanent tooth enamel.

Bond strength of different adhesive systems to dental hard tissues.

This study compared the shear bond strengths of different adhesive systems to enamel and dentin of different depths. The adhesive systems used were: Single Bond one-bottle total-etch; AQ Bond one-step self-etching, Clearfil SE Bond two-step self-etching and Tyrian SPE/One-step Plus two-step self-etching. Eighty extracted non-carious human mandibular molars were mounted in self-curing resin and the occlusal surfaces were ground with a mechanical grinder to obtain flat occlusal enamel surfaces. After applying the adhesive systems, a plastic tube was attached to the enamel surfaces. The tube was filled with a universal hybrid resin composite, which was then polymerized. The specimens were stored in water at 37 degrees C for 24 hours. Shear bond testing was carried out using an Instron Universal testing machine with a crosshead speed of 1 mm/minute. The occlusal enamel of the 80 teeth was removed to determine the bond strengths of the adhesives to superficial dentin. To obtain deep dentin, the same teeth were ground deep towards the pulp, with the remaining dentin thickness approximately 0.7 mm. The adhesives and restorative material were then applied to the prepared dentin surfaces following the methodology described above. For occlusal enamel surfaces, the bond strength of Single Bond was significantly higher than the other adhesives. Single Bond, Clearfil SE Bond and Tyrian SPE/One-step Plus performed equally when bonded to superficial dentin; the lowest bond strength was obtained with AQ Bond. On deep dentin, the highest bond strengths were obtained with Clearfil SE Bond. For each adhesive system, shear bond strength to enamel was statistically higher than it was to either superficial or deep dentin. There were no significant differences between shear bond strengths to superficial versus deep dentin, regardless of adhesive.