RESUMO
The intricate structure of lignin, characterized by a mix of hydrophilic components and hydrophobic structures from its aliphatic and aromatic constituents, poses challenges in creating monodisperse particles. This is due to the need for precise modulation of self-assembly kinetics. Herein, we explore a correlation between the substructure of lignin and its capacity for self-assembly. We have conducted an in-depth investigation into the interactions between hydrophilic groups, such as phenolic and aromatic-OH, and monolignols with interunit linkages that are involved in the formation of lignin particles (LPs). A high degree of hydrophilicity with a condensed structure is crucial for high supersaturation levels, which in turn determines the growth phase and leads to small LPs. An approach based on tailoring the supersaturation level which is contingent on the structural characteristics of extracted organosolv lignin was used to obtain remarkably uniform LPs with mean diameters of approximately 230 and 480 nm. The results of this study have the potential to serve as a foundation for the preparation of monodisperse LPs derived from various lignin sources as well as for the development of methods to extract lignin containing a specific chemical substructure.
Assuntos
Lignina , Lipopolissacarídeos , Lignina/química , Fenóis , Interações Hidrofóbicas e HidrofílicasRESUMO
Polyethylene terephthalate (PET) is a plastic material commonly applied to beverage packaging used in everyday life. Owing to PET's versatility and ease of use, its consumption has continuously increased, resulting in considerable waste generation. Several physical and chemical recycling processes have been developed to address this problem. Recently, biological upcycling is being actively studied and has come to be regarded as a powerful technology for overcoming the economic issues associated with conventional recycling methods. For upcycling, PET should be degraded into small molecules, such as terephthalic acid and ethylene glycol, which are utilized as substrates for bioconversion, through various degradation processes, including gasification, pyrolysis, and chemical/biological depolymerization. Furthermore, biological upcycling methods have been applied to biosynthesize value-added chemicals, such as adipic acid, muconic acid, catechol, vanillin, and glycolic acid. In this review, we introduce and discuss various degradation methods that yield substrates for bioconversion and biological upcycling processes to produce value-added biochemicals. These technologies encourage a circular economy, which reduces the amount of waste released into the environment.
Assuntos
Plásticos , Polietilenotereftalatos , Polietilenotereftalatos/química , Polietilenotereftalatos/metabolismo , Reciclagem/métodosRESUMO
Advances in scientific technology in the early twentieth century have facilitated the development of synthetic plastics that are lightweight, rigid, and can be easily molded into a desirable shape without changing their material properties. Thus, plastics become ubiquitous and indispensable materials that are used in various manufacturing sectors, including clothing, automotive, medical, and electronic industries. However, strong physical durability and chemical stability of synthetic plastics, most of which are produced from fossil fuels, hinder their complete degradation when they are improperly discarded after use. In addition, accumulated plastic wastes without degradation have caused severe environmental problems, such as microplastics pollution and plastic islands. Thus, the usage and production of plastics is not free from environmental pollution or resource depletion. In order to lessen the impact of climate change and reduce plastic pollution, it is necessary to understand and address the current plastic life cycles. In this review, "sustainable biopolymers" are suggested as a promising solution to the current plastic crisis. The desired properties of sustainable biopolymers and bio-based and bio/chemical hybrid technologies for the development of sustainable biopolymers are mainly discussed.
Assuntos
Biopolímeros/química , Plásticos/química , Biodegradação Ambiental , Conservação dos Recursos Naturais , Poluição Ambiental , Combustíveis Fósseis , ReciclagemRESUMO
Chitin, a sustainable and functional biological macromolecule, can be converted into chitin nanofibers (ChNFs), and are applicable as a mechanically reinforcing and bioactive filler for polymer matrices. Improving the performance of ChNFs typically relies on their nanofibrilization and miscibility with matrices. To transform chitin biomass into organo-dispersible ChNFs, a series of time-/energy-consuming chemical and mechanical treatments are required: 1) deacetylation, 2) disintegration, 3) surface modification to minimize their aggregation through hydrogen bonds, 4) drying, and 5) re-dispersion. This paper presents a one-step method to transform chitin biomass to organo-dispersible acetylated ChNFs via a ball-milling method in the presence of relatively low toxic acetic anhydride without water. This method minimizes water contaminations and energy for dehydrating. The resulting chitin nanofiber material is mixed with poly(llactic acid) (PLLA) to produce all-bio-based nanocomposites. The composite indicated a 66% increase in Young's modulus and a 100% increase in tensile strength compared to the pristine PLLA. Furthermore, it did not exhibit any observable cytotoxic effect, thus potentially applicable as a biomedical material.
Assuntos
Quitina/química , Nanofibras/química , Biomassa , Módulo de Elasticidade , Ligação de Hidrogênio , Poliésteres/química , Polímeros/química , Resistência à TraçãoRESUMO
Photochromic polymeric films were prepared by doping photochromic dye spironaphthooxazine into polymer resin gels such as polyurethane, vinyl copolymer, and copolymer of vinyl and nitorocellulose at different concentrations. All of the composite films show normal photochromism. The kinetics of the photochromism/decoloration in the films were quantified by fitting biexponential equations to their photochromic decay curves after irradiation. It was observed that the decoration process is faster in vinyl copolymer than that in the copolymer of vinyl and nitrocellulose and is the slowest in the case of polyurethane. The decoloration mechanisms of spironaphthooxazine in those polymeric matrixes have been discussed.