From self-care behaviours to cardiometabolic risks prevention for the health of farmers: Nursing implications.

AIMS: The study aimed to explore farmers' self-care behaviours including oral hygiene, remaining natural teeth, cardiometabolic risks, hepatitis, risk of stroke and their determinant factors. METHODS: This cross-sectional study was conducted between June 2020 and March 2021 in the south-western remote areas of Taiwan. We recruited current farmers who participated in an annual community health screening conducted by a collaborated local hospital. Data were collected through face-to-face interviews using a semi-structured questionnaire. Blood samples were drawn and stored in the central laboratory of the cooperating hospital. The study outcomes included cardiometabolic risks, the remaining natural teeth, and farmers' self-care behaviours including oral hygiene, adopting a healthy diet and substance use. RESULTS: Overall, 183 current farmers (55.2% women, aged 66.9 ± 11.7 years) were enrolled. Abnormal blood pressure, high risk of stroke, metabolic syndrome and hepatitis C virus infection were found among the participants. The average remaining teeth were 12.1, 73.2% of participants had <20 teeth; 90.2% and 71% did not undergo regular dental check-ups and scaling or use dental floss, respectively. The determinant factors associated with the remaining teeth included a high risk of stroke, teeth scaling and dental floss use. Although only 3.8% felt mentally distressed, many farmers were unaware of having potential cardiometabolic diseases and curable viral hepatitis, and only two had received antiviral treatment. CONCLUSION: The farmers in this study had a high prevalence of cardiometabolic risks, a high probability of stroke, inadequate number of remaining teeth and poor oral hygiene behaviours. These findings can provide evidence to develop health promotion programmes for farmers. IMPACT: This study demonstrates the health needs of farmers. We strongly recommend that community nurses empower farmers to engage in self-care behaviours through tailored health promotion programmes. For instance, by discussing cardiometabolic risk prevention from the farmers' perspectives to improve their health literacy.

[Factors Associated With Oral Health Status and Oral Hygiene Behavior in Patients With Stroke].

BACKGROUND: Studies have shown that oral health is closely related to systemic diseases. Poor oral hygiene may lead to dental caries and periodontal disease and also increase the risk of cardiovascular disease. Patients with stroke have a possibility of recurrence, and good oral health is expected to benefit their general health. Nevertheless, nursing research exploring the oral health and oral hygiene behaviors of stroke patients has been rare. PURPOSE: To explore the factors significantly associated with oral health status and oral hygiene behaviors in patients with stroke. METHODS: A cross-sectional research design with convenient sampling was used. Information on health promoting behaviors and oral health status was collected in a teaching hospital in southern Taiwan. A multivariate linear regression model was applied to explore the factors associated with oral health status in patients with stroke. RESULTS: One hundred and eight-five patients with stroke were enrolled in this study. The average number of real teeth was 11.3 and the average score for oral health status was 4. The univariate analysis showed that being 65 years of age or older, having an education level below primary school, having a lower Barthel index score, having a higher modified Rankin scale score, not brushing and flossing, not having a regular tooth cleaning, having a lower of health promotion score, and having insufficient water intake levels were all associated with a worse oral health status. The stepwise regression analysis showed that factors affecting oral health status include health promotion behaviors, age, tooth brushing, and water intake, which, together, accounted for 28.5% of the total variance. CONCLUSIONS / IMPLICATIONS FOR PRACTICE: The findings indicate that oral health status, oral hygiene behaviors, and health promoting behaviors are inadequate among patients with stroke. Clinicians should promote health-related behaviors early to their patients with stroke, specifically in terms of implementing proper oral hygiene behaviors in daily routine care.

High Prevalence of Cardiometabolic Risks and Health Needs Among Patients With Hepatocellular Carcinoma After Treatment: A Cross-sectional Study.

BACKGROUND: Many studies have indicated that inadequate health-related behavior is associated with the progression of cancer and cardiometabolic disorders. Because patients with hepatocellular carcinoma may adopt inadequate health behaviors, they are at risk for cancer recurrence, mortality, cardiometabolic disease progression, and worse quality of life. OBJECTIVE: To explore the prevalence of cardiometabolic risks and health-promoting behaviors associated with quality of life among patients with hepatocellular carcinoma after treatment. METHODS: A cross-sectional study was conducted from October 2021 to August 2022. Data were collected through face-to-face interviews using a structured questionnaire, and cardiometabolic information was recorded from medical charts. RESULTS: In total, 115 patients with liver cancer after treatment were enrolled; 73% were male. The mean age was 67.7 years, and high prevalence rates of central obesity (72.2%) and metabolic syndrome (47%) were noted. Inadequate exercise, oral hygiene, and cigarette smoking were common. The health-promoting score was significantly associated with exercise, the number of remaining teeth, and metabolic syndrome, which correlated with quality of life, including positive functional and negative symptoms dimensions. CONCLUSIONS: The findings demonstrated a high prevalence of cardiometabolic risks and inadequate health-related behaviors among patients with liver cancer after treatment. This study highlights the need for healthcare providers to help patients increase health literacy for preventing cardiometabolic risks at outpatient clinics. IMPLICATIONS FOR PRACTICE: Findings from this study can be used to advise healthcare providers to educate patients with liver cancer during and after treatment on improving their health-promoting behaviors.

Association between serum carcinoembryonic antigen and cardiometabolic risks: Implication for cardiometabolic prevention.

Background: Serum carcinoembryonic antigen (CEA) is a biomarker commonly used to detect colorectal cancer. CEA levels are affected by many factors, including cardiometabolic diseases, such as cardiovascular diseases (CVDs) and diabetes. Cardiometabolic diseases and cancer share a similar pathological inflammatory pathway, which correlates with an unhealthy lifestyle. Hence, establishing an adequate CEA cut-off value might be a valuable reference for developing precision healthcare programs for cardiometabolic disease prevention. This study aimed to investigate the association between cardiometabolic risks and serum CEA and the underlying factors. Methods: A community-based, cross-sectional study was conducted between March and December 2021 on the western coast of Taiwan. Lifestyle data were assessed using a structured questionnaire. The cardiometabolic biomarkers, serum CEA, urine malondialdehyde, and 1-hydroxypyrene were quantified by the central laboratory of the collaborating hospital. Chi-square and binary multivariable logistic regression implemented in R version 4.0.2 were used to identify factors defining the risk of high serum CEA levels. Results: A total of 6,295 adult residents without cancer-related diseases completed the study. The mean age was 48.6 (SD = 16.4) years, 56% were female, 32% had metabolic syndrome, and 23% and 10% had CVDs and diabetes, respectively. Multivariate logistic regression showed that age ≥ 65 years, male sex, alcohol consumption, smoking, infrequent use of dental floss, fewer remaining teeth, CVDs, diabetes, and oxidative stress were significantly associated with serum CEA ≥ 3 ng/mL. The discriminatory performance of the area under the receiver operating characteristic curve was 0.75 (0.73-0.76), showing that this model was suitable for distinguishing high CEA levels. Conclusion: Our findings highlight the importance of understanding cardiometabolic diseases, unhealthy lifestyles, and oxidative stress, which contribute to high serum CEA. This study demonstrates that CEA, a well-known tumor marker, can help the early detection and prevention of cardiometabolic diseases via personalized lifestyle modification.

Integration of ceramic membrane and compressed air-assisted solvent extraction (CASX) for metal recovery.

In our previous publications, compressed air-assisted solvent extraction process (CASX) was developed and proved to be kinetically efficient process for metal removal. In the current study, CASX with a ceramic MF membrane integrated for separation of spent solvent was employed to remove and recover metal from wastewater. MF was operated either in crossflow mode or dead-end with intermittent flushing mode. Under crossflow mode, three distinct stages of flux vs. TMP (trans-membrane pressure) relationship were observed. In the first stage, flux increases with increasing TMP which is followed by the stage of stable flux with increasing TMP. After reaching a threshold TMP which is dependent of crossflow velocity, flux increases again with increasing TMP. At the last stage, solvent was pushed through membrane pores as indicated by increasing permeate COD. In dead-end with intermittent flushing mode, an intermittent flushing flow (2 min after a 10-min or a 30-min dead-end filtration) was incorporated to reduce membrane fouling by flush out MSAB accumulated on membrane surface. Effects of solvent concentration and composition were also investigated. Solvent concentrations ranging from 0.1 to 1% (w/w) have no adverse effect in terms of membrane fouling. However, solvent composition, i.e. D(2)EHPA/kerosene ratio, shows impact on membrane fouling. The type of metal extractants employed in CASX has significant impact on both membrane fouling and the quality of filtrate due to the differences in their viscosity and water solubility. Separation of MSAB was the limiting process controlling metal removal efficiency, and the removal efficiency of Cd(II) and Cr(VI) followed the same trend as that for COD.

Modeling of digital dental articulator and its accuracy verification using optical measurement.

BACKGROUND AND OBJECTIVES: Temporomandibular joint has been considered one of the most complex joints in human body. Dental articulation hinged upon temporomandibular joint is essential and fundamentally important for dental restoration design and prosthetic/orthodontic occlusion analysis. As digital dentistry rapidly grows, a complete digital work flow requires the use of a digital articulator for occlusion analysis. However, commercial CAD/CAM systems do not provide any method to verify the modeling accuracy of a digital articulator. There is also a lack of detail and generalized mathematical modeling of the digital articulator for simulating the jaw movement. METHODS: This paper presents the development of a digital articulator by mathematically modeling a general dental articulator which simulates the relative jaw motion between the maxilla and mandible. As the digital articulator moves, the digital upper teeth move relatively to the digital lower teeth, thus simulating the occlusal path with teeth collision detection function. To verify the accuracy of our modeled digital articulator, an improved optical tracking method is proposed to measure the pose of a mechanical articulator with 6 degrees of freedom and compare that with the digital articulator. RESULTS: The digital articulator system proposed in this paper achieves the following functions: 1. Digitalize the dental articulator with verified precision. Combined with dental design software, restorations can be designed with more efficiency and accuracy. 2. Provide an improved optical tracking method which can compare the movement error between the mechanical articulator and digital articulator. Thus the accuracy of the digital articulation can be verified. The result shows the error of our system is controlled under sub-millimeter which provides sufficient accuracy for the design of restoration under static and dynamic occlusion conditions. CONCLUSIONS: We develop a general digital articulator which can simulate jaw movement between opposing teeth and an improved optical tracking method to verify the accuracy of the digital articulator. The modeling and accuracy verification of the digital articulator shows that there is a systematic and reliable way to replace traditional mechanical articulator and can close the gap for digital restoration fabrication.

Local autogenous bone mixed with bone expander: an optimal option of bone graft in single-segment posterolateral lumbar fusion.

BACKGROUND: This was a retrospective study of clinical results for single-segment posterolateral lumbar fusion using local autograft bone with bone expander. METHODS: Sixty-six patients underwent single-segment decompression with instrumented posterolateral fusion. Locally harvested morselized bone from the decompressive site mixed with 2 mL calcium sulfate (OSTEOSET, Wright Medical Technology, Arlington, TN, USA) was used for the fusion at the posterolateral aspect of the lumbar spine. The minimum follow-up period was 15 months. The status of the fusion was evaluated by plain film, flexion-extension view, and fine-cut computed tomography (CT) with coronal reconstruction. Radiographic fusion criteria included less than 5 degrees of angular motion, less than 2 mm of translation, and evidence of bridging bone in the posterolateral lumbar area on the CT scan. The clinical outcome was recorded using VAS score and the ODI. The results were then compared with the result of the other group who had received the same procedure except that a pure autogenous bone graft harvested from the PSIS was used. RESULTS: In the group using local bone and OSTEOSET, the fusion rate was 92.3% by the strict criteria. The VAS scores for leg pain and back pain were decreased in the 2 groups, but there was no significant difference between them. The improvement in the ODI was also similar between the 2 groups. Intraoperative blood loss and the time needed for the operation were significantly decreased in the group using local bone and OSTEOSET as the bone graft. In the group using autogenous bone graft, donor site morbidity was still encountered. CONCLUSIONS: Using local laminectomy bone with calcium sulfate as bone graft is a practical option in posterolateral lumbar fusion with the advantages of less operative time, less blood loss, and avoidance of donor site morbidity.

Biomechanical analysis of different types of pedicle screw augmentation: a cadaveric and synthetic bone sample study of instrumented vertebral specimens.

This study aims to determine the pull-out strength, stiffness and failure pull-out energy of cement-augmented, cannulated-fenestrated pedicle screws in an osteoporotic cadaveric thoracolumbar model, and to determine, using synthetic bone samples, the extraction torques of screws pre-filled with cement and those with cement injected through perforations. Radiographs and bone mineral density measurements from 32 fresh thoracolumbar vertebrae were used to define specimen quality. Axial pull-out strength of screws was determined through mechanical testing. Mechanical pull-out strength, stiffness and energy-to-failure ratio were recorded for cement-augmented and non-cement-augmented screws. Synthetic bone simulating a human spinal bone with severe osteoporosis was used to measure the maximum extraction torque. The pull-out strength and stiffness-to-failure ratio of cement pre-filled and cement-injected screws were significantly higher than the non-cement-augmented control group. However, the cement pre-filled and cement-injected groups did not differ significantly across these values (p=0.07). The cement pre-filled group had the highest failure pull-out energy, approximately 2.8 times greater than that of the cement-injected (p<0.001), and approximately 11.5 times greater than that of the control groups (p<0.001). In the axial pull-out test, the cement-injected group had a greater maximum extraction torque than the cement pre-filled group, but was statistically insignificant (p=0.17). The initial fixation strength of cannulated screws pre-filled with cement is similar to that of cannulated screws injected with cement through perforations. This comparable strength, along with the heightened pull-out energy and reduced extraction torque, indicates that pedicle screws pre-filled with cement are superior for bone fixation over pedicle screws injected with cement.

Efficient flexible phosphorescent polymer light-emitting diodes based on silver nanowire-polymer composite electrode.

Blue, green, and red electrophosphorescent polymer light-emitting diodes have been fabricated on silver nanowire-polymer composite electrode. The devices are 20%-50% more efficient than control devices on ITO/glass and exhibit small efficiency roll-off at high luminances. The blue PLEDs were repeatedly bent to 1.5 mm radius concave or convex with calculated strain in the emissive layer approximately 5% (tensile or compressive).